[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz (2200.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33304612864 (31761 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: < > [...] FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs [...] FreeBSD/SMP: 2 package(s) x 8 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] ioapic1 <Version 2.0> irqs 24-47 on motherboard [...] ioapic2 <Version 2.0> irqs 48-71 on motherboard [...] Launching APs: 31 1 23 27 30 18 19 5 21 26 2 4 6 15 11 10 13 7 8 29 25 17 3 12 14 24 16 28 9 20 22 [...] Timecounter "TSC-low" frequency 1100022800 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] 000.000082 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <SUPERM SMCI--MB> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x8020-0x803f mem 0xdfa20000-0xdfa3ffff,0xdfa44000-0xdfa47fff irq 27 at device 0.0 numa-domain 0 on pci2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x8000-0x801f mem 0xdfa00000-0xdfa1ffff,0xdfa40000-0xdfa43fff irq 30 at device 0.1 numa-domain 0 on pci2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci0 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] em0: <Intel(R) PRO/1000 Network Connection> port 0x7020-0x703f mem 0xdf9a0000-0xdf9bffff,0xdf980000-0xdf99ffff irq 32 at device 0.0 numa-domain 0 on pci3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 Network Connection> port 0x7000-0x701f mem 0xdf940000-0xdf95ffff,0xdf920000-0xdf93ffff irq 36 at device 0.1 numa-domain 0 on pci3 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 40 at device 3.2 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0x6000-0x60ff mem 0xde400000-0xde403fff,0xde000000-0xde3fffff irq 16 at device 0.0 numa-domain 0 on pci6 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdfb23000-0xdfb233ff irq 16 at device 26.0 numa-domain 0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdfb22000-0xdfb223ff irq 23 at device 29.0 numa-domain 0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] vgapci0: <VGA-compatible display> mem 0xdd000000-0xddffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 16 at device 1.0 numa-domain 0 on pci7 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Patsburg AHCI SATA controller> port 0x9050-0x9057,0x9040-0x9043,0x9030-0x9037,0x9020-0x9023,0x9000-0x901f mem 0xdfb21000-0xdfb217ff irq 18 at device 31.2 numa-domain 0 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib8: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] pci8: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci8: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci8: <dasp, performance counters> at device 19.4 (no driver attached) [...] pci8: <dasp, performance counters> at device 19.5 (no driver attached) [...] pcib9: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci9: <ACPI PCI bus> numa-domain 1 on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci9 [...] pci10: <ACPI PCI bus> numa-domain 1 on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> irq 50 at device 1.0 numa-domain 1 on pci9 [...] pci11: <ACPI PCI bus> numa-domain 1 on pcib11 [...] pcib12: <ACPI PCI-PCI bridge> irq 56 at device 2.0 numa-domain 1 on pci9 [...] pci12: <ACPI PCI bus> numa-domain 1 on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> irq 64 at device 3.0 numa-domain 1 on pci9 [...] pci13: <ACPI PCI bus> numa-domain 1 on pcib13 [...] pcib14: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci14: <ACPI PCI bus> numa-domain 1 on pcib14 [...] pci14: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci14: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci14: <dasp, performance counters> at device 19.4 (no driver attached) [...] pci14: <dasp, performance counters> at device 19.5 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff,0xcb000-0xcb7ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich1 bus 0 scbus2 target 0 lun 0 [...] ada0: <WDC WD5003ABYZ-011FA0 01.01S03> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada1 at ahcich2 bus 0 scbus3 target 0 lun 0 [...] ada1: <WDC WD5003ABYZ-011FA0 01.01S03> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] GEOM_MIRROR: Device mirror/OPNsense launched (2/2). [...] Trying to mount root from ufs:/dev/ufs/OPNsense [rw]... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0 [...] ukbd0 numa-domain 0 on uhub2 [...] ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] igb0: link state changed to UP [...] em0: link state changed to UP [...] ioat0: <SNB IOAT Ch0> mem 0xdfb1c000-0xdfb1ffff irq 31 at device 4.0 numa-domain 0 on pci0 [...] ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat1: <SNB IOAT Ch1> mem 0xdfb18000-0xdfb1bfff irq 39 at device 4.1 numa-domain 0 on pci0 [...] ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat2: <SNB IOAT Ch2> mem 0xdfb14000-0xdfb17fff irq 31 at device 4.2 numa-domain 0 on pci0 [...] ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat3: <SNB IOAT Ch3> mem 0xdfb10000-0xdfb13fff irq 39 at device 4.3 numa-domain 0 on pci0 [...] ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat4: <SNB IOAT Ch4> mem 0xdfb0c000-0xdfb0ffff irq 31 at device 4.4 numa-domain 0 on pci0 [...] ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat5: <SNB IOAT Ch5> mem 0xdfb08000-0xdfb0bfff irq 39 at device 4.5 numa-domain 0 on pci0 [...] ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat6: <SNB IOAT Ch6> mem 0xdfb04000-0xdfb07fff irq 31 at device 4.6 numa-domain 0 on pci0 [...] ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat7: <SNB IOAT Ch7> mem 0xdfb00000-0xdfb03fff irq 39 at device 4.7 numa-domain 0 on pci0 [...] ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat8: <SNB IOAT Ch0> mem 0xfbf1c000-0xfbf1ffff irq 55 at device 4.0 numa-domain 1 on pci9 [...] ioat8: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat9: <SNB IOAT Ch1> mem 0xfbf18000-0xfbf1bfff irq 63 at device 4.1 numa-domain 1 on pci9 [...] ioat9: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat10: <SNB IOAT Ch2> mem 0xfbf14000-0xfbf17fff irq 55 at device 4.2 numa-domain 1 on pci9 [...] ioat10: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat11: <SNB IOAT Ch3> mem 0xfbf10000-0xfbf13fff irq 63 at device 4.3 numa-domain 1 on pci9 [...] ioat11: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat12: <SNB IOAT Ch4> mem 0xfbf0c000-0xfbf0ffff irq 55 at device 4.4 numa-domain 1 on pci9 [...] ioat12: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat13: <SNB IOAT Ch5> mem 0xfbf08000-0xfbf0bfff irq 63 at device 4.5 numa-domain 1 on pci9 [...] ioat13: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat14: <SNB IOAT Ch6> mem 0xfbf04000-0xfbf07fff irq 55 at device 4.6 numa-domain 1 on pci9 [...] ioat14: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat15: <SNB IOAT Ch7> mem 0xfbf00000-0xfbf03fff irq 63 at device 4.7 numa-domain 1 on pci9 [...] ioat15: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ums0 numa-domain 0 on uhub2 [...] ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0 [...] igb0: link state changed to DOWN [...] em0: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] igb0: link state changed to UP [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] em0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb0: promiscuous mode enabled [...] lo0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb0: promiscuous mode disabled [...] lo0: promiscuous mode disabled [...] igb0: promiscuous mode enabled [...] lo0: promiscuous mode enabled [...] igb0: promiscuous mode disabled [...] lo0: promiscuous mode disabled [...] igb0: promiscuous mode enabled [...] lo0: promiscuous mode enabled [...] igb0: promiscuous mode disabled [...] lo0: promiscuous mode disabled [...] Bump flowset buckets to 256 (was 0) [...] Bump flowset buckets to 256 (was 0) [...] Bump flowset buckets to 256 (was 0) [...] Bump flowset buckets to 256 (was 0) [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] Bump flowset buckets to 256 (was 0) [...] Bump flowset buckets to 256 (was 0) [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] Bump flowset buckets to 256 (was 0) [...] Bump flowset buckets to 256 (was 0) [...] Bump flowset buckets to 256 (was 0) [...] Bump flowset buckets to 256 (was 0) [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pid 9904 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p13-HBSD #0 5a415173060(stable/21.1)-dirty: Fri Feb 5 16:41:22 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz (2200.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33304612864 (31761 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: < > [...] FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs [...] FreeBSD/SMP: 2 package(s) x 8 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] ioapic1 <Version 2.0> irqs 24-47 on motherboard [...] ioapic2 <Version 2.0> irqs 48-71 on motherboard [...] Launching APs: 31 1 23 2 19 12 28 26 27 6 18 15 16 25 11 7 4 30 29 10 20 21 13 14 9 17 22 3 5 24 8 [...] Timecounter "TSC-low" frequency 1100025142 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] 000.000082 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <SUPERM SMCI--MB> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x8020-0x803f mem 0xdfa20000-0xdfa3ffff,0xdfa44000-0xdfa47fff irq 27 at device 0.0 numa-domain 0 on pci2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x8000-0x801f mem 0xdfa00000-0xdfa1ffff,0xdfa40000-0xdfa43fff irq 30 at device 0.1 numa-domain 0 on pci2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci0 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] em0: <Intel(R) PRO/1000 Network Connection> port 0x7020-0x703f mem 0xdf9a0000-0xdf9bffff,0xdf980000-0xdf99ffff irq 32 at device 0.0 numa-domain 0 on pci3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 Network Connection> port 0x7000-0x701f mem 0xdf940000-0xdf95ffff,0xdf920000-0xdf93ffff irq 36 at device 0.1 numa-domain 0 on pci3 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 40 at device 3.2 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0x6000-0x60ff mem 0xde400000-0xde403fff,0xde000000-0xde3fffff irq 16 at device 0.0 numa-domain 0 on pci6 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdfb23000-0xdfb233ff irq 16 at device 26.0 numa-domain 0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdfb22000-0xdfb223ff irq 23 at device 29.0 numa-domain 0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] vgapci0: <VGA-compatible display> mem 0xdd000000-0xddffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 16 at device 1.0 numa-domain 0 on pci7 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Patsburg AHCI SATA controller> port 0x9050-0x9057,0x9040-0x9043,0x9030-0x9037,0x9020-0x9023,0x9000-0x901f mem 0xdfb21000-0xdfb217ff irq 18 at device 31.2 numa-domain 0 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib8: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] pci8: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci8: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci8: <dasp, performance counters> at device 19.4 (no driver attached) [...] pci8: <dasp, performance counters> at device 19.5 (no driver attached) [...] pcib9: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci9: <ACPI PCI bus> numa-domain 1 on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci9 [...] pci10: <ACPI PCI bus> numa-domain 1 on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> irq 50 at device 1.0 numa-domain 1 on pci9 [...] pci11: <ACPI PCI bus> numa-domain 1 on pcib11 [...] pcib12: <ACPI PCI-PCI bridge> irq 56 at device 2.0 numa-domain 1 on pci9 [...] pci12: <ACPI PCI bus> numa-domain 1 on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> irq 64 at device 3.0 numa-domain 1 on pci9 [...] pci13: <ACPI PCI bus> numa-domain 1 on pcib13 [...] pcib14: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci14: <ACPI PCI bus> numa-domain 1 on pcib14 [...] pci14: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci14: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci14: <dasp, performance counters> at device 19.4 (no driver attached) [...] pci14: <dasp, performance counters> at device 19.5 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff,0xcb000-0xcb7ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich1 bus 0 scbus2 target 0 lun 0 [...] ada0: <WDC WD5003ABYZ-011FA0 01.01S03> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada1 at ahcich2 bus 0 scbus3 target 0 lun 0 [...] ada1: <WDC WD5003ABYZ-011FA0 01.01S03> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] GEOM_MIRROR: Device mirror/OPNsense launched (2/2). [...] Trying to mount root from ufs:/dev/ufs/OPNsense [rw]... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0 [...] ukbd0 numa-domain 0 on uhub2 [...] ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] igb0: link state changed to UP [...] em0: link state changed to UP [...] ioat0: <SNB IOAT Ch0> mem 0xdfb1c000-0xdfb1ffff irq 31 at device 4.0 numa-domain 0 on pci0 [...] ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat1: <SNB IOAT Ch1> mem 0xdfb18000-0xdfb1bfff irq 39 at device 4.1 numa-domain 0 on pci0 [...] ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat2: <SNB IOAT Ch2> mem 0xdfb14000-0xdfb17fff irq 31 at device 4.2 numa-domain 0 on pci0 [...] ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat3: <SNB IOAT Ch3> mem 0xdfb10000-0xdfb13fff irq 39 at device 4.3 numa-domain 0 on pci0 [...] ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat4: <SNB IOAT Ch4> mem 0xdfb0c000-0xdfb0ffff irq 31 at device 4.4 numa-domain 0 on pci0 [...] ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat5: <SNB IOAT Ch5> mem 0xdfb08000-0xdfb0bfff irq 39 at device 4.5 numa-domain 0 on pci0 [...] ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat6: <SNB IOAT Ch6> mem 0xdfb04000-0xdfb07fff irq 31 at device 4.6 numa-domain 0 on pci0 [...] ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat7: <SNB IOAT Ch7> mem 0xdfb00000-0xdfb03fff irq 39 at device 4.7 numa-domain 0 on pci0 [...] ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat8: <SNB IOAT Ch0> mem 0xfbf1c000-0xfbf1ffff irq 55 at device 4.0 numa-domain 1 on pci9 [...] ioat8: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat9: <SNB IOAT Ch1> mem 0xfbf18000-0xfbf1bfff irq 63 at device 4.1 numa-domain 1 on pci9 [...] ioat9: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat10: <SNB IOAT Ch2> mem 0xfbf14000-0xfbf17fff irq 55 at device 4.2 numa-domain 1 on pci9 [...] ioat10: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat11: <SNB IOAT Ch3> mem 0xfbf10000-0xfbf13fff irq 63 at device 4.3 numa-domain 1 on pci9 [...] ioat11: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat12: <SNB IOAT Ch4> mem 0xfbf0c000-0xfbf0ffff irq 55 at device 4.4 numa-domain 1 on pci9 [...] ioat12: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat13: <SNB IOAT Ch5> mem 0xfbf08000-0xfbf0bfff irq 63 at device 4.5 numa-domain 1 on pci9 [...] ioat13: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat14: <SNB IOAT Ch6> mem 0xfbf04000-0xfbf07fff irq 55 at device 4.6 numa-domain 1 on pci9 [...] ioat14: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat15: <SNB IOAT Ch7> mem 0xfbf00000-0xfbf03fff irq 63 at device 4.7 numa-domain 1 on pci9 [...] ioat15: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ums0 numa-domain 0 on uhub2 [...] ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0 [...] igb0: link state changed to DOWN [...] em0: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] igb0: link state changed to UP [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] Bump flowset buckets to 256 (was 0) [...] Bump flowset buckets to 256 (was 0) [...] em0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize()