[...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p5 GENERIC amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD Ryzen 7 1700 Eight-Core Processor (2994.46-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f11 Family=0x17 Model=0x1 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33327226880 (31783 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-796) [...] ioapic0: Changing APIC ID to 17 [...] ioapic1: Changing APIC ID to 18 [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 12 8 9 15 2 1 4 14 6 5 7 13 10 3 11 [...] Timecounter "TSC-low" frequency 1497228780 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000023 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.3 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] xhci0: <AMD 300 Series USB 3.0 controller> mem 0xfe7a0000-0xfe7a7fff irq 32 at device 0.0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD 300 Series AHCI SATA controller> mem 0xfe780000-0xfe79ffff irq 33 at device 0.1 on pci1 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 34 at device 0.2 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 32 at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfe600000-0xfe600fff,0xf0300000-0xf0303fff irq 32 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <ACPI PCI-PCI bridge> irq 33 at device 1.0 on pci2 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 32 at device 4.0 on pci2 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 34 at device 6.0 on pci2 [...] pci6: <ACPI PCI bus> on pcib6 [...] ahci1: <Marvell 88SE9215 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xfe540000-0xfe5407ff irq 34 at device 0.0 on pci6 [...] ahci1: AHCI v1.00 with 4 6Gbps ports, Port Multiplier supported with FBS [...] ahcich8: <AHCI channel> at channel 0 on ahci1 [...] ahcich9: <AHCI channel> at channel 1 on ahci1 [...] ahcich10: <AHCI channel> at channel 2 on ahci1 [...] ahcich11: <AHCI channel> at channel 3 on ahci1 [...] pcib7: <ACPI PCI-PCI bridge> irq 35 at device 7.0 on pci2 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfe900000-0xfe93ffff irq 54 at device 0.0 on pci8 [...] vgapci0: Boot video device [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfe960000-0xfe963fff irq 55 at device 0.1 on pci8 [...] pcib9: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pci9: <unknown> at device 0.0 (no driver attached) [...] pci9: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci1: <AMD KERNCZ USB 3.0 controller> mem 0xfe200000-0xfe2fffff irq 37 at device 0.3 on pci9 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib10: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pci10: <unknown> at device 0.0 (no driver attached) [...] ahci2: <AMD KERNCZ AHCI SATA controller> mem 0xfe808000-0xfe808fff irq 42 at device 0.2 on pci10 [...] ahci2: AHCI v1.31 with 3 6Gbps ports, Port Multiplier supported with FBS [...] ahcich12: <AHCI channel> at channel 0 on ahci2 [...] ahcich13: <AHCI channel> at channel 1 on ahci2 [...] ahcich14: <AHCI channel> at channel 2 on ahci2 [...] hdac1: <AMD (0x1457) HDA Controller> mem 0xfe800000-0xfe807fff irq 43 at device 0.3 on pci10 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 [...] uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 [...] uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xd17ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] hdacc1: <Realtek ALC1220 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC1220 Audio Function Group> at nid 1 on hdacc1 [...] pcm6: <Realtek ALC1220 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 [...] pcm7: <Realtek ALC1220 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm8: <Realtek ALC1220 (Rear Digital)> at nid 30 on hdaa1 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 EVO 250GB EMT02B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <Samsung SSD 850 EVO 250GB EMT02B6Q> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 238475MB (488397168 512 byte sectors) [...] ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] cd0 at ahcich14 bus 0 scbus10 target 0 lun 0 [...] cd0: <ASUS DRW-24B1ST j 1.01> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ada2 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada2: <Samsung SSD 850 EVO 250GB EMT02B6Q> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada2: Command Queueing enabled [...] ada2: 238475MB (488397168 512 byte sectors) [...] ada2: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada3 at ahcich5 bus 0 scbus3 target 0 lun 0 [...] ada3: <Samsung SSD 850 EVO 250GB EMT02B6Q> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada3: Command Queueing enabled [...] ada3: 238475MB (488397168 512 byte sectors) [...] ada3: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada4 at ahcich10 bus 0 scbus6 target 0 lun 0 [...] ada4: <WDC WD2002FYPS-01U1B0 04.05G04> ATA8-ACS SATA 2.x device [...] ada4: Serial Number... [...] ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada4: Command Queueing enabled [...] ada4: 1907729MB (3907029168 512 byte sectors) [...] ada5 at ahcich11 bus 0 scbus7 target 0 lun 0 [...] ada5: <WDC WD2003FZEX-00SRLA0 01.01A01> ACS-3 ATA SATA 3.x device [...] ada5: Serial Number... [...] ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada5: Command Queueing enabled [...] ada5: 1907729MB (3907029168 512 byte sectors) [...] ada5: quirks=0x1<4K> [...] Trying to mount root from zfs:zroot/ROOT/12.1-p5 []... [...] GEOM_ELI: Device ada0p4.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: hardware [...] GEOM_ELI: Device ada1p4.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: hardware [...] GEOM_ELI: Device ada2p4.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: hardware [...] GEOM_ELI: Device ada3p4.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: hardware [...] Root mount waiting for: usbus1 usbus0 [...] uhub0: 8 ports with 8 removable, self powered [...] uhub1: 22 ports with 22 removable, self powered [...] ugen1.2: <vendor 0x0557 product 0x8021> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 1> on usbus1 [...] Root mount waiting for: usbus1 usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 usbus0 [...] ugen1.3: <vendor 0x04d9 USB Keyboard> at usbus1 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] ugen0.2: <Western Digital My Book 25EE> at usbus0 [...] umass0 on uhub1 [...] umass0: <Western Digital My Book 25EE, class 0/0, rev 3.00/40.04, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x8000 [...] umass0:11:0: Attached to scbus11 [...] da0 at umass-sim0 bus 0 scbus11 target 0 lun 0 [...] da0: <WD My Book 25EE 4004> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 3815447MB (7814035456 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ses0 at umass-sim0 bus 0 scbus11 target 0 lun 1 [...] ses0: <WD SES Device 4004> Fixed Enclosure Services SPC-4 SCSI device [...] ses0: Serial Number... [...] ses0: 400.000MB/s transfers [...] ses0: SES Device [...] usb_alloc_device: set address 3 failed (USB_ERR_IOERROR, ignored) [...] ugen0.3: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <GenesysLogic> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub4 on uhub1 [...] uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/92.26, addr 3> on usbus0 [...] uhub4: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub4: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.5: <Silicon Labs CP2102 USB to UART Bridge Controller> at usbus0 [...] GEOM_ELI: Device ada4p1.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: hardware [...] GEOM_ELI: Device ada5p1.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: hardware [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub4: at uhub1, port 6, addr 3 (disconnected) [...] ugen0.5: <Silicon Labs CP2102 USB to UART Bridge Controller> at usbus0 (disconnected) [...] uhub4: detached [...] ugen0.3: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub3: at uhub1, port 2, addr 3 (disconnected) [...] uhub3: detached [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1DA2:0xE353 0xE7). [...] [drm] register mmio base: 0xFE900000 [...] [drm] register mmio size: 262144 [...] [drm] PCI I/O BAR is not found. [...] [drm] probing gen 2 caps for device 1022:1453 = 737903/e [...] [drm] probing mlw for device 1002:67df = 440903 [...] [drm] UVD is enabled in VM mode [...] [drm] UVD ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] ATOM BIOS: 113-4E353BU-O50 [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/92.26, addr 5> on usbus0 [...] uhub3: MTT enabled [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mc.bin [...] drmn0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [...] drmn0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF [...] Successfully added WC MTRR for [0xe0000000-0xefffffff]: 0; [...] [drm] Detected VRAM RAM=8192M, BAR=256M [...] [drm] RAM width 256bits GDDR5 [...] [TTM] Zone kernel: Available graphics memory: 16730064 kiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 8192M of VRAM memory ready [...] [drm] amdgpu: 8192M of GTT memory ready. [...] i_size_write unimplemented [...] [drm] GART: num cpu pages 65536, num gpu pages 65536 [...] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000). [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-D-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-D-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] AMDGPU Display Connectors [...] [drm] Connector 0: [...] [drm] DP-1 [...] [drm] HPD6 [...] [drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY2 [...] [drm] Connector 1: [...] [drm] DP-2 [...] [drm] HPD4 [...] [drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873 [...] [drm] Encoders: [...] [drm] DFP2: INTERNAL_UNIPHY2 [...] [drm] Connector 2: [...] [drm] HDMI-A-1 [...] [drm] HPD1 [...] [drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f [...] [drm] Encoders: [...] [drm] DFP3: INTERNAL_UNIPHY1 [...] [drm] Connector 3: [...] [drm] HDMI-A-2 [...] [drm] HPD5 [...] [drm] DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877 [...] [drm] Encoders: [...] [drm] DFP4: INTERNAL_UNIPHY1 [...] [drm] Connector 4: [...] [drm] DVI-D-1 [...] [drm] HPD3 [...] [drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f [...] [drm] Encoders: [...] [drm] DFP5: INTERNAL_UNIPHY [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_pfp_2.bin [...] uhub3: 4 ports with 4 removable, self powered [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_me_2.bin [...] ugen0.4: <Silicon Labs CP2102 USB to UART Bridge Controller> at usbus0 [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_ce_2.bin [...] [drm] Chained IB support enabled! [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_rlc.bin [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mec_2.bin [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mec2_2.bin [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_sdma.bin [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_sdma1.bin [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_uvd.bin [...] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_vce.bin [...] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_k_smc.bin [...] [drm:gfx_v8_0_kiq_kcq_enable] KCQ enable failed (scratch(0xC040)=0xCAFEDEAD) [...] [drm:amdgpu_device_ip_init] hw_init of IP block <gfx_v8_0> failed -22 [...] drmn0: amdgpu_device_ip_init failed [...] drmn0: 0xfffff800061b3800 unpin not necessary [...] drmn0: 0xfffff800039f4000 unpin not necessary [...] [TTM] Finalizing pool allocator [...] [TTM] Zone kernel: Used memory at exit: 0 kiB [...] [TTM] Zone dma32: Used memory at exit: 0 kiB [...] [drm] amdgpu: ttm finalized [...] drmn0: Fatal error during GPU init [...] [drm] amdgpu: finishing device. [...] device_attach: drmn0 attach returned 22 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] lo1: link state changed to UP [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] ums0 on uhub2 [...] ums0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus1 [...] uslcom0 on uhub3 [...] ums1 on uhub2 [...] ums1: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus1 [...] ums1: 5 buttons and [XYZ] coordinates ID=0 [...] uslcom0: <CP2102 USB to UART Bridge Controller> on usbus0 [...] CPU: AMD Ryzen 7 1700 Eight-Core Processor (2994.46-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f11 Family=0x17 Model=0x1 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] AMD-Vi: IVRS Info VAsize = 64 PAsize = 48 GVAsize = 2 flags:0 [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] ivhd0: <AMD-Vi/IOMMU ivhd with EFR> on acpi0 [...] ivhd0: Flag:b0<IotlbSup,Coherent> [...] ivhd0: Features(type:0x11) MsiNumPPR = 0 PNBanks= 2 PNCounters= 0 [...] ivhd0: Extended features[31:0]:22294ada<PPRSup,NXSup,GTSup,IASup> HATS = 0x2 GATS = 0x0 GLXSup = 0x1 SmiFSup = 0x1 SmiFRC = 0x2 GAMSup = 0x1 DualPortLogSup = 0x2 DualEventLogSup = 0x2 [...] ivhd0: Extended features[62:32]:f77ef<USSup> Max PASID: 0x2f DevTblSegSup = 0x3 MarcSup = 0x1 [...] ivhd0: supported paging level:7, will use only: 4 [...] ivhd0: device range: 0x0 - 0xffff [...] ivhd0: PCI cap 0x190b640f@0x40 feature:19<IOTLB,EFR,CapExt> [...] bridge0: Ethernet address: ... [...] bridge0: changing name to 'vm-public' [...] re0: promiscuous mode enabled [...] vm-public: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub3: at uhub1, port 6, addr 5 (disconnected) [...] ugen0.4: <Silicon Labs CP2102 USB to UART Bridge Controller> at usbus0 (disconnected) [...] uslcom0: at uhub3, port 2, addr 6 (disconnected) [...] uslcom0: detached [...] uhub3: detached [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/92.26, addr 7> on usbus0 [...] uhub3: MTT enabled [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.4: <Silicon Labs CP2102 USB to UART Bridge Controller> at usbus0 [...] uslcom0 on uhub3 [...] uslcom0: <CP2102 USB to UART Bridge Controller> on usbus0 [...] usb_alloc_device: set address 5 failed (USB_ERR_IOERROR, ignored) [...] ugen0.5: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub4 on uhub1 [...] uhub4: <GenesysLogic> on usbus0 [...] uhub4: 4 ports with 4 removable, self powered [...] Limiting closed port RST response from 271 to 200 packets/sec [...] Limiting closed port RST response from 342 to 200 packets/sec