[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248057-239b52c9023 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-1607 0 @ 3.00GHz (2992.61-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33286774784 (31744 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-A0 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 3 2 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <LENOVO TC-A0> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 41 at device 3.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xfbe20000-0xfbe3ffff irq 40 at device 0.0 on pci4 [...] vgapci0: Boot video device [...] hdac0: <ATI RV810 HDA Controller> mem 0xfbe40000-0xfbe43fff irq 44 at device 0.1 on pci4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] atapci0: <Intel ATA controller> port 0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0bf irq 18 at device 22.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] uart2: <Intel C600/X79 Series Chipset KT Controller> port 0xf0a0-0xf0a7 mem 0xfbf2a000-0xfbf2afff irq 17 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) 82579LM> port 0xf040-0xf05f mem 0xfbf00000-0xfbf1ffff,0xfbf29000-0xfbf29fff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfbf28000-0xfbf283ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Patsburg HDA Controller> mem 0xfbf20000-0xfbf23fff irq 22 at device 27.0 on pci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em1: <Intel(R) PRO/1000 PT 82572EI (Copper)> port 0xd000-0xd01f mem 0xfbd40000-0xfbd5ffff,0xfbd20000-0xfbd3ffff irq 16 at device 0.0 on pci6 [...] em1: EEPROM V5.11-8 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfbc00000-0xfbc01fff irq 16 at device 0.0 on pci7 [...] xhci0: 32 bytes context size, 32-bit DMA [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfbf27000-0xfbf273ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Patsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfbf26000-0xfbf267ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib9: <ACPI Host-PCI bridge> on acpi0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pci9: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci9: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci9: <dasp, performance counters> at device 19.4 (no driver attached) [...] pci9: <dasp, performance counters> at device 19.5 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 23de00001e00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 23de00001e00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 23de00001e00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 23de00001e00 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1496250513 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC662 rev3 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa1 [...] pcm2: <Realtek ALC662 rev3 (Onboard Analog Speaker)> at nid 21 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: CAM usbus0 usbus1 usbus2 [...] ugen1.1: <0x1033 XHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus1 [...] uhub2: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: CAM usbus0 usbus2 [...] uhub1: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus2 target 0 lun 0 [...] ada0: <BIOSTAR S100-240GB V4.7> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus2 target 0 [...] Root mount waiting for: usbus0 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus2 [...] Root mount waiting for: usbus2 [...] ugen2.3: <vendor 0x04d9 product 0x1702> at usbus2 [...] ukbd0 on uhub4 [...] ukbd0: <vendor 0x04d9 product 0x1702, class 0/0, rev 1.10/4.06, addr 3> on usbus2 [...] kbd2 at ukbd0 [...] mountroot: waiting for device /dev/gpt/rootfs...