[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RC2 #0 releng/13.0-n244684-13c22f74953: Fri Mar 12 04:05:19 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1600x900 [...] CPU: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz (2594.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8186511360 (7807 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1297024271 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000055 [4350] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x10> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf5800000-0xf5bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7c34000-0xf7c37fff at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7c20000-0xf7c2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7c3e000-0xf7c3efff at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7c00000-0xf7c1ffff,0xf7c3d000-0xf7c3dfff at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7c3c000-0xf7c3c3ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7c30000-0xf7c33fff at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Advanced 6235> mem 0xf7b00000-0xf7b01fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7a01000-0xf7a01fff,0xf7a00000-0xf7a007ff at device 0.0 on pci7 [...] sdhci_pci0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. [...] sdhci_pci0: 1 slot(s) allocated [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7c3b000-0xf7c3b3ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7c3a000-0xf7c3a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] pcm3: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC292 (Analog)> at nid 22 and 18 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] uhub0 on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: accelerated software [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub0: 21 ports with 21 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen2.3: <vendor 0x8087 product 0x07da> at usbus2 [...] ugen1.3: <CN0767N972487393B0K6A00 LaptopIntegratedWebcamHD> at usbus1 [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7c39000-0xf7c390ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ppc1: <Parallel port> port 0-0x7 irq 0 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Polled port [...] ppi0: <Parallel I/O> on ppbus0 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd200000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-3 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=900 width=1600 depth=32 [...] cmsize=16 size=5763072 [...] pbase=0xe0000000 vbase=0xfffff800e0000000 [...] name=drmn0 flags=0x0 stride=6400 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] lo0: link state changed to UP [...] ubt0 on uhub4 [...] ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 3> on usbus2 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] lo0: link state changed to DOWN [...] lo0: link state changed to UP [...] lo0: link state changed to DOWN [...] lo0: link state changed to UP [...] lo0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] lo0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] lo0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] wlan0: link state changed to UP [...] lo0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] wlan0: link state changed to UP [...] lo0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] All buffers synced. [...] Uptime: 1h42m27s [...] GEOM_ELI: Device ada0p3.eli destroyed. [...] GEOM_ELI: Detached ada0p3.eli on last close. [...] ubt0: detached [...] uhub4: detached [...] uhub2: detached [...] uhub3: detached [...] uhub1: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RC2 #0 releng/13.0-n244684-13c22f74953: Fri Mar 12 04:05:19 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1600x900 [...] CPU: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz (2594.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8186507264 (7807 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1297026053 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000055 [4350] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x10> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf5800000-0xf5bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7c34000-0xf7c37fff at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7c20000-0xf7c2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7c3e000-0xf7c3efff at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7c00000-0xf7c1ffff,0xf7c3d000-0xf7c3dfff at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7c3c000-0xf7c3c3ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7c30000-0xf7c33fff at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Advanced 6235> mem 0xf7b00000-0xf7b01fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7a01000-0xf7a01fff,0xf7a00000-0xf7a007ff at device 0.0 on pci7 [...] sdhci_pci0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. [...] sdhci_pci0: 1 slot(s) allocated [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7c3b000-0xf7c3b3ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7c3a000-0xf7c3a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC292 (Analog)> at nid 22 and 18 on hdaa1 [...] uhub0 on usbus1 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] uhub2 on usbus0 [...] uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: accelerated software [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub2: 21 ports with 21 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen2.3: <vendor 0x8087 product 0x07da> at usbus2 [...] ugen1.3: <CN0767N972487393B0K6A00 LaptopIntegratedWebcamHD> at usbus1 [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7c39000-0xf7c390ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ppc1: <Parallel port> port 0-0x7 irq 0 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Polled port [...] ppi0: <Parallel I/O> on ppbus0 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd200000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-3 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=900 width=1600 depth=32 [...] cmsize=16 size=5763072 [...] pbase=0xe0000000 vbase=0xfffff800e0000000 [...] name=drmn0 flags=0x0 stride=6400 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] wlan0: link state changed to UP [...] ubt0 on uhub3 [...] ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 3> on usbus2 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 32m18s [...] GEOM_ELI: Device ada0p3.eli destroyed. [...] GEOM_ELI: Detached ada0p3.eli on last close. [...] ubt0: detached [...] uhub3: detached [...] uhub1: detached [...] uhub4: detached [...] uhub0: detached [...] uhub2: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RC2 #0 releng/13.0-n244684-13c22f74953: Fri Mar 12 04:05:19 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1600x900 [...] CPU: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz (2594.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8186507264 (7807 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1297025552 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000055 [4350] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x10> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf5800000-0xf5bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7c34000-0xf7c37fff at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7c20000-0xf7c2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7c3e000-0xf7c3efff at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7c00000-0xf7c1ffff,0xf7c3d000-0xf7c3dfff at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7c3c000-0xf7c3c3ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7c30000-0xf7c33fff at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Advanced 6235> mem 0xf7b00000-0xf7b01fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7a01000-0xf7a01fff,0xf7a00000-0xf7a007ff at device 0.0 on pci7 [...] sdhci_pci0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. [...] sdhci_pci0: 1 slot(s) allocated [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7c3b000-0xf7c3b3ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7c3a000-0xf7c3a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC292 (Analog)> at nid 22 and 18 on hdaa1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] sysctl_warn_reuse: can't re-use a leaf (dev.uhub.%parent)! [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub2 on usbus0 [...] uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: accelerated software [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub2: 21 ports with 21 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub4: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen1.3: <CN0767N972487393B0K6A00 LaptopIntegratedWebcamHD> at usbus1 [...] Root mount waiting for: usbus2 [...] Root mount waiting for: usbus2 [...] Root mount waiting for: usbus2 [...] uhub_attach: getting USB 2.0 HUB descriptor failed,error=USB_ERR_TIMEOUT [...] device_attach: uhub3 attach returned 6 [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7c39000-0xf7c390ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ppc1: <Parallel port> port 0-0x7 irq 0 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Polled port [...] ppi0: <Parallel I/O> on ppbus0 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd200000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-3 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=900 width=1600 depth=32 [...] cmsize=16 size=5763072 [...] pbase=0xe0000000 vbase=0xfffff800e0000000 [...] name=drmn0 flags=0x0 stride=6400 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] wlan0: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd)