[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p16-HBSD #0 36f2183a3f4(stable/21.1)-dirty: Tue May 25 10:43:32 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Xeon(R) CPU E5530 @ 2.40GHz (2394.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x106a5 Family=0x6 Model=0x1a Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 25769803776 (24576 MB) [...] avail memory = 24972582912 (23815 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic1: Changing APIC ID to 1 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] ioapic1 <Version 2.0> irqs 32-55 on motherboard [...] Launching APs: 1 9 12 3 5 13 6 11 2 4 7 15 14 10 8 [...] Timecounter "TSC-low" frequency 1197026644 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] 000.000066 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL PE_SC3> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd6000000-0xd7ffffff irq 36 at device 0.0 on pci1 [...] miibus0: <MII bus> on bce0 [...] brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce0: Using defaults for TSO: 65518/35/2048 [...] bce0: Ethernet address: ... [...] bce0: [...] bce0: link state changed to DOWN [...] ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd8000000-0xd9ffffff irq 48 at device 0.1 on pci1 [...] miibus1: <MII bus> on bce1 [...] brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce1: Using defaults for TSO: 65518/35/2048 [...] bce1: Ethernet address: ... [...] bce1: [...] bce1: link state changed to DOWN [...] ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] bce2: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xda000000-0xdbffffff irq 32 at device 0.0 on pci2 [...] miibus2: <MII bus> on bce2 [...] brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2 [...] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce2: Using defaults for TSO: 65518/35/2048 [...] bce2: Ethernet address: ... [...] bce2: [...] bce2: link state changed to DOWN [...] ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce3: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xdc000000-0xddffffff irq 42 at device 0.1 on pci2 [...] miibus3: <MII bus> on bce3 [...] brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3 [...] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce3: Using defaults for TSO: 65518/35/2048 [...] bce3: Ethernet address: ... [...] bce3: [...] bce3: link state changed to DOWN [...] ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] mfi0: <Dell PERC 6> port 0xfc00-0xfcff mem 0xde180000-0xde1bffff,0xde1c0000-0xde1fffff irq 33 at device 0.0 on pci3 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 1008, limiting to 128 [...] mfi0: 50857 (675595855s/0x0020/info) - Shutdown command received from host [...] mfi0: 50858 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028) [...] mfi0: 50859 (boot + 3s/0x0020/info) - Firmware version 1.22.52-1909 [...] mfi0: 50860 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028) [...] mfi0: 50861 (boot + 3s/0x0020/info) - Firmware version 1.22.52-1909 [...] mfi0: 50862 (boot + 23s/0x0008/info) - Battery Present [...] mfi0: 50863 (boot + 23s/0x0020/info) - Controller hardware revision ID (0x0) [...] mfi0: 50864 (boot + 23s/0x0020/info) - Package version XXX.XXX.XXX.XXX [...] mfi0: 50865 (boot + 23s/0x0020/info) - Board Revision [...] mfi0: 50866 (boot + 41s/0x0002/info) - Unexpected sense: Encl PD 20 Path 5a4ba0b028026700, CDB: 12 00 00 00 04 00, Sense: 6/29/00 [...] pcib4: mfi0: 50867 (boot + 42s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored [...] <ACPI PCI-PCI bridge> at device 5.0 on pci0 [...] pci4: mfi0: 50868 (boot + 42s/0x0004/info) - Enclosure PD 20(c None/p0) element (SES code 0x17) status changed [...] mfi0: <ACPI PCI bus> on pcib4 [...] 50869 (boot + 42s/0x0002/info) - Inserted: Encl PD 20 [...] mfi0: 50870 (boot + 42s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5a4ba0b028026700,0000000000000000 [...] mfi0: 50871 (boot + 42s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] mfi0: 50872 (boot + 42s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=1221000000000000,0000000000000000 [...] mfi0: 50873 (675596493s/0x0020/info) - Time established as 05/29/21 9:41:33; (68 seconds since power on) [...] mfi0: 50874 (675596513s/0x0008/info) - Battery temperature is normal [...] mfi0: 50875 (675596513s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 50876 (675596513s/0x0008/info) - Battery started charging [...] pcib5: mfi0: 50877 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028) [...] mfi0: 50878 (boot + 3s/0x0020/info) - Firmware version 1.22.52-1909 [...] mfi0: 50879 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028) [...] <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci5: mfi0: 50880 (boot + 3s/0x0020/info) - Firmware version 1.22.52-1909 [...] mfi0: 50881 (boot + 23s/0x0008/info) - Battery Present [...] <ACPI PCI bus> on pcib5 [...] mfi0: 50882 (boot + 23s/0x0020/info) - Controller hardware revision ID (0x0) [...] mfi0: 50883 (boot + 23s/0x0020/info) - Package version XXX.XXX.XXX.XXX [...] mfi0: 50884 (boot + 23s/0x0020/info) - Board Revision [...] mfi0: 50885 (boot + 30s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored [...] mfi0: 50886 (boot + 30s/0x0002/info) - Inserted: Encl PD 20 [...] mfi0: 50887 (boot + 30s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5a4ba0b028026700,0000000000000000 [...] mfi0: 50888 (boot + 30s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] mfi0: 50889 (boot + 30s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=1221000000000000,0pcib6: 000000000000000 [...] mfi0: 50890 (boot + 88s/0x0008/info) - Battery temperature is normal [...] mfi0: 50891 (boot + 88s/0x0008/info) - Current capacity of the battery is above threshold [...] <ACPI PCI-PCI bridge> at device 7.0 on pci0 [...] pci6: mfi0: 50892 (boot + 88s/0x0008/info) - Battery started charging [...] mfi0: 50893 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028) [...] <ACPI PCI bus> on pcib6 [...] mfi0: 50894 (boot + 3s/0x0020/info) - Firmware version 1.22.52-1909 [...] mfi0: 50895 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028) [...] mfi0: 50896 (boot + 3s/0x0020/info) - Firmware version 1.22.52-1909 [...] mfi0: 50897 (boot + 23s/0x0008/info) - Battery Present [...] mfi0: 50898 (boot + 23s/0x0020/info) - Controller hardware revision ID (0x0) [...] mfi0: 50899 (boot + 23s/0x0020/info) - Package version XXX.XXX.XXX.XXX [...] mfi0: 50900 (boot + 23s/0x0020/info) - Board Revision [...] mfi0: 50901 (boot + 30s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored [...] mfi0: 50902 (boot + 30s/0x0002/info) - Inserted: Encl PD 20 [...] pcib7: <ACPI PCI-PCI bridge>mfi0: at device 9.0 on pci0 [...] MFI_DCMD_PD_LIST_QUERY failed 2 [...] pci7: mfi0: 50903 (boot + 30s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5a4ba0b028026700,<ACPI PCI bus> on pcib7 [...] 0000000000000000 [...] mfi0: 50904 (boot + 30s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] mfi0: MFI_DCMD_PD_LIST_QUERY failed 2 [...] mfi0: 50905 (boot + 30s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=1221000000000000,0000000000000000 [...] mfi0: 50906 (675596867s/0x0020/info) - Time established as 05/29/21 9:47:47; (70 seconds since power on) [...] mfi0: 50907 (675596885s/0x0008/info) - Battery temperature is normal [...] mfi0: 50908 (675596885s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 50909 (675596885s/0x0008/info) - Battery started charging [...] pci7: <network, ethernet> at device 0.0 (no driver attached) [...] pci7: <network, ethernet> at device 0.1 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) [...] uhci0: <Intel 82801I (ICH9) USB controller> port 0xec40-0xec5f irq 17 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801I (ICH9) USB controller> port 0xec60-0xec7f irq 18 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xde0fe000-0xde0fe3ff irq 19 at device 26.7 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] uhci2: <Intel 82801I (ICH9) USB controller> port 0xec80-0xec9f irq 21 at device 29.0 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus3 on uhci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801I (ICH9) USB controller> port 0xeca0-0xecbf irq 20 at device 29.1 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xde0ff000-0xde0ff3ff irq 21 at device 29.7 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> mem 0xd5800000-0xd5ffffff,0xdeffc000-0xdeffffff,0xdf000000-0xdf7fffff irq 19 at device 3.0 on pci8 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH9 SATA300 controller> port 0xec10-0xec17,0xec08-0xec0b,0xec18-0xec1f,0xec0c-0xec0f,0xec20-0xec2f,0xec30-0xec3f irq 23 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] mfid0 on mfi0 [...] mfid0: 476416MB (975699968 sectors) RAID volume 'Master' is optimal [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] ugen5.1: <Intel EHCI root HUB> at usbus5 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] cd0 at ata2 bus 0 scbus0 target 0 lun 0 [...] cd0: <TEAC DVD-ROM DV-28SW R.2A> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub2: 4 ports with 4 removable, self powered [...] uhub4: 4 ports with 4 removable, self powered [...] ugen2.2: <vendor 0x05e3 USB2.0 Hub> at usbus2 [...] uhub6 on uhub4 [...] uhub6: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on usbus2 [...] uhub6: 4 ports with 4 removable, bus powered [...] ugen3.2: <Avocent USB Composite Device-0> at usbus3 [...] ukbd0 on uhub0 [...] ukbd0: <Keyboard> on usbus3 [...] kbd2 at ukbd0 [...] ugen2.3: <DELL Dell USB Entry Keyboard> at usbus2 [...] ukbd1 on uhub6 [...] ukbd1: <DELL Dell USB Entry Keyboard, class 0/0, rev 2.00/1.04, addr 3> on usbus2 [...] kbd3 at ukbd1 [...] ugen2.4: <Logitech USB Optical Mouse> at usbus2 [...] ugen2.5: <vendor 0x0424 product 0x2514> at usbus2 [...] uhub7 on uhub4 [...] uhub7: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 5> on usbus2 [...] uhub7: MTT enabled [...] uhub7: 3 ports with 3 removable, self powered [...] ugen2.4: <Logitech USB Optical Mouse> at usbus2 (disconnected) [...] ugen2.4: <Logitech USB Optical Mouse> at usbus2 [...] ums0 on uhub0 [...] ums1 on uhub6 [...] ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 4> on usbus2 [...] ums1: 3 buttons and [XYZ] coordinates ID=0 [...] ums0: <Mouse> on usbus3 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] lo0: link state changed to UP [...] aesni0: No AES or SHA support. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] bce0: [...] bce0: link state changed to UP [...] Gigabit link up! [...] bce0: Gigabit link up! [...] bce0: Gigabit link up! [...] bce1: [...] bce1: link state changed to UP [...] Gigabit link up! [...] bce1: Gigabit link up! [...] bce1: Gigabit link up! [...] tun1: changing name to 'ovpns1' [...] tun2: changing name to 'ovpnc2' [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] 296.961079 [1130] generic_netmap_attach Emulated adapter for bce1 created (prev was NULL) [...] 296.969170 [1035] generic_netmap_dtor Emulated netmap adapter for bce1 destroyed [...] bce1: permanently promiscuous mode enabled [...] 296.984279 [1130] generic_netmap_attach Emulated adapter for bce1 created (prev was NULL) [...] 297.136305 [ 320] generic_netmap_register Emulated adapter for bce1 activated [...] 301.950505 [1130] generic_netmap_attach Emulated adapter for ovpns1 created (prev was NULL) [...] 301.958790 [1035] generic_netmap_dtor Emulated netmap adapter for ovpns1 destroyed [...] 301.966857 [1130] generic_netmap_attach Emulated adapter for ovpns1 created (prev was NULL) [...] 301.975357 [ 320] generic_netmap_register Emulated adapter for ovpns1 activated [...] 302.069070 [1130] generic_netmap_attach Emulated adapter for bce0 created (prev was NULL) [...] 302.077174 [1035] generic_netmap_dtor Emulated netmap adapter for bce0 destroyed [...] bce0: permanently promiscuous mode enabled [...] 302.085116 [1130] generic_netmap_attach Emulated adapter for bce0 created (prev was NULL) [...] 302.093480 [ 320] generic_netmap_register Emulated adapter for bce0 activated [...] ql0: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xde400000-0xde5fffff,0xde3e0000-0xde3effff irq 40 at device 0.0 on pci7 [...] ql0: qla_pci_attach: firmware[XXX.XXX.XXX.XXX] [...] ql0: Ethernet address: ... [...] ql1: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xde600000-0xde7fffff,0xde3f0000-0xde3fffff irq 40 at device 0.1 on pci7 [...] ql1: qla_pci_attach: firmware[XXX.XXX.XXX.XXX] [...] ql1: Ethernet address: ...