[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267939-fd5bc7f34e1 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 1024x768 [...] CPU microcode: updated from 0xb000038 to 0xb000040 [...] CPU: Intel(R) Xeon(R) CPU E5-2640 v4 @ 2.40GHz (2400.07-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16458362880 (15695 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <SUPERM SMCI--MB> [...] FreeBSD/SMP: Multiprocessor System Detected: 20 CPUs [...] FreeBSD/SMP: 1 package(s) x 10 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 18 16 4 3 13 19 2 14 10 11 8 5 17 12 7 9 6 15 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci1 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci1 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.2 numa-domain 0 on pci1 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] igb0: <Intel(R) I340 82580 (Copper)> mem 0xfb300000-0xfb37ffff,0xfb38c000-0xfb38ffff irq 34 at device 0.0 numa-domain 0 on pci4 [...] igb0: EEPROM V3.19-0 eTrack 0x000161a3 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> mem 0xfb200000-0xfb27ffff,0xfb388000-0xfb38bfff irq 37 at device 0.1 numa-domain 0 on pci4 [...] igb1: EEPROM V3.19-0 eTrack 0x000161a3 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> mem 0xfb180000-0xfb1fffff,0xfb384000-0xfb387fff irq 36 at device 0.2 numa-domain 0 on pci4 [...] igb2: EEPROM V3.19-0 eTrack 0x000161a3 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 8 RX queues 8 TX queues [...] igb2: Using MSI-X interrupts with 9 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0xfb100000-0xfb17ffff,0xfb380000-0xfb383fff irq 38 at device 0.3 numa-domain 0 on pci4 [...] igb3: EEPROM V3.19-0 eTrack 0x000161a3 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 8 RX queues 8 TX queues [...] igb3: Using MSI-X interrupts with 9 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci1 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pci1: <unknown> at device 17.0 (no driver attached) [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf020-0xf03f mem 0xfb638000-0xfb6387ff irq 16 at device 17.4 numa-domain 0 on pci1 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb600000-0xfb60ffff irq 19 at device 20.0 numa-domain 0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci1: <simple comms> at device 22.0 (no driver attached) [...] pci1: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb634000-0xfb6343ff irq 18 at device 26.0 numa-domain 0 on pci1 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci1 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci6 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 16 at device 0.0 numa-domain 0 on pci7 [...] vgapci0: Boot video device [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.2 numa-domain 0 on pci1 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] igb4: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0xfb500000-0xfb57ffff,0xfb580000-0xfb583fff irq 18 at device 0.0 numa-domain 0 on pci8 [...] igb4: EEPROM V3.16-0 eTrack 0x800004d7 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.3 numa-domain 0 on pci1 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] igb5: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xfb400000-0xfb47ffff,0xfb480000-0xfb483fff irq 19 at device 0.0 numa-domain 0 on pci9 [...] igb5: EEPROM V3.16-0 eTrack 0x800004d9 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 4 RX queues 4 TX queues [...] igb5: Using MSI-X interrupts with 5 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb633000-0xfb6333ff irq 18 at device 29.0 numa-domain 0 on pci1 [...] usbus2: EHCI version 1.0 [...] usbus2 numa-domain 0 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci1: <Intel Wellsburg AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xfb632000-0xfb6327ff irq 16 at device 31.2 numa-domain 0 on pci1 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahcich7: <AHCI channel> at channel 3 on ahci1 [...] ahcich8: <AHCI channel> at channel 4 on ahci1 [...] ahcich9: <AHCI channel> at channel 5 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] acpi_button0: <Power Button> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounter "TSC-low" frequency 1199999364 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 numa-domain 0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 numa-domain 0 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 numa-domain 0 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <INTEL SSDSC2KB960G8 XCV10110> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 915715MB (1875385008 512 byte sectors) [...] ada1 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada1: <INTEL SSDSC2KB960G8 XCV10110> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 915715MB (1875385008 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] ses0: ada1,pass1 in 'Slot 03', SATA Slot: scbus3 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen2.2: <vendor 0x8087 product 0x8002> at usbus2 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 [...] uhub4 numa-domain 0 on uhub2 [...] uhub4: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen0.2: <vendor 0x0557 product 0x7000> at usbus0 [...] uhub5 numa-domain 0 on uhub0 [...] uhub5: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 1> on usbus0 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] uhub5: 4 ports with 3 removable, self powered [...] ugen0.3: <vendor 0x0557 product 0x2419> at usbus0 [...] ukbd0 numa-domain 0 on uhub5 [...] ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Dual Console: Video Primary, Serial Secondary