[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE GENERIC amd64 [...] FreeBSD clang version 12.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-12.0.1-0-gfed41342a82f) [...] VT(efifb): resolution 1920x1080 [...] CPU: AMD Ryzen 5 3600X 6-Core Processor (3792.95-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x10ab757<CLZERO,IRPerf,XSaveErPtr,RDPRU,MCOMMIT,WBNOINVD,IBPB,STIBP,STIBP_ALWAYSON,SSBD> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33275310080 (31733 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 10 11 6 7 9 8 1 4 5 2 3 [...] Timecounter "TSC-low" frequency 1896473315 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 16351232 bytes at 0xffffffff831aa890 [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.3 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff at device 0.0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff at device 0.1 on pci1 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.2 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci2 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 4.0 on pci2 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 5.0 on pci2 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 6.0 on pci2 [...] pci7: <ACPI PCI bus> on pcib7 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xfcb00000-0xfcb001ff at device 0.0 on pci7 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich8: <AHCI channel> at channel 0 on ahci1 [...] ahcich9: <AHCI channel> at channel 1 on ahci1 [...] pcib8: <ACPI PCI-PCI bridge> at device 7.0 on pci2 [...] pci8: <ACPI PCI bus> on pcib8 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff at device 0.0 on pci8 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib9: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfcf00000-0xfcf3ffff at device 0.0 on pci9 [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcf60000-0xfcf63fff at device 0.1 on pci9 [...] pcib10: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pci10: <unknown> at device 0.0 (no driver attached) [...] pcib11: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] pci11: <unknown> at device 0.0 (no driver attached) [...] pci11: <encrypt/decrypt> at device 0.1 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc700000-0xfc7fffff at device 0.3 on pci11 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] hdac1: <AMD X570 HDA Controller> mem 0xfc900000-0xfc907fff at device 0.4 on pci11 [...] pcib12: <ACPI PCI-PCI bridge> at device 8.2 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] ahci2: <AMD KERNCZ AHCI SATA controller> mem 0xfce00000-0xfce007ff at device 0.0 on pci12 [...] ahci2: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich10: <AHCI channel> at channel 0 on ahci2 [...] pcib13: <ACPI PCI-PCI bridge> at device 8.3 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] ahci3: <AMD KERNCZ AHCI SATA controller> mem 0xfcd00000-0xfcd007ff at device 0.0 on pci13 [...] ahci3: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich11: <AHCI channel> at channel 0 on ahci3 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (23) in association 1! Disabling association. [...] pcm6: <Realtek ALC892 (Analog)> at nid 27 and 24,26 on hdaa1 [...] pcm7: <Realtek ALC892 (Front Analog Mic)> at nid 25 on hdaa1 [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: CAM [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] uhub1 on usbus0 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada0: <WDC WD10EZEX-08WN4A0 02.01A02> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada1 at ahcich8 bus 0 scbus4 target 0 lun 0 [...] ada1: <PNY CS1311 240GB SSD CS131122> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] random: unblocking device. [...] uhub0: 8 ports with 8 removable, self powered [...] ugen1.2: <Kingston HyperX Pulsefire Surge> at usbus1 [...] ukbd0 on uhub0 [...] ukbd0: <Kingston HyperX Pulsefire Surge, class 0/0, rev 2.00/11.27, addr 1> on usbus1 [...] kbd2 at ukbd0 [...] uhub1: 22 ports with 22 removable, self powered [...] ugen1.3: <Ducky Ducky One2 Mini RGB> at usbus1 [...] ukbd1 on uhub0 [...] ukbd1: <Ducky Ducky One2 Mini RGB, class 0/0, rev 1.10/0.00, addr 2> on usbus1 [...] kbd3 at ukbd1 [...] ukbd2 on uhub0 [...] ukbd2: <Ducky Ducky One2 Mini RGB, class 0/0, rev 1.10/0.00, addr 2> on usbus1 [...] kbd4 at ukbd2 [...] ugen0.2: <USB SanDisk 3.2Gen1> at usbus0 [...] umass0 on uhub1 [...] umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 3.20/1.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:8:0: Attached to scbus8 [...] da0 at umass-sim0 bus 0 scbus8 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 29358MB (60125184 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: ventoy/IMAGE: the secondary GPT table is corrupt or invalid. [...] GEOM: ventoy/IMAGE: using the primary only -- recovery suggested. [...] GEOM: iso9660/GHOSTBSD: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/GHOSTBSD: using the primary only -- recovery suggested. [...] Trying to mount root from zfs:livecd []... [...] Cuse v0.1.36 @ /dev/cuse [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to UP [...] ums0 on uhub0 [...] ums0: <Kingston HyperX Pulsefire Surge, class 0/0, rev 2.00/11.27, addr 1> on usbus1 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] uhid0 on uhub0 [...] uhid0: <Kingston HyperX Pulsefire Surge, class 0/0, rev 2.00/11.27, addr 1> on usbus1 [...] ums1 on uhub0 [...] ums1: <Ducky Ducky One2 Mini RGB, class 0/0, rev 1.10/0.00, addr 2> on usbus1 [...] ums1: 5 buttons and [XYZ] coordinates ID=0 [...] uhid1 on uhub0 [...] uhid1: <Ducky Ducky One2 Mini RGB, class 0/0, rev 1.10/0.00, addr 2> on usbus1 [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled