[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248071-cafeb6ce414 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: AMD A6-5400K APU with Radeon(tm) HD Graphics (3593.49-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x610f01 Family=0x15 Model=0x10 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7630512128 (7277 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-CPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-CPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfeb00000-0xfeb3ffff irq 17 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xfdb00000-0xfdbfffff,0xfde0c000-0xfde0ffff irq 18 at device 0.0 on pci1 [...] igb0: EEPROM V1.67-0 Option ROM V16-b5-p20 eTrack 0x80000d66 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xfda00000-0xfdafffff,0xfde08000-0xfde0bfff irq 19 at device 0.1 on pci1 [...] igb1: EEPROM V1.67-0 Option ROM V16-b5-p20 eTrack 0x80000d66 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xfd900000-0xfd9fffff,0xfde04000-0xfde07fff irq 16 at device 0.2 on pci1 [...] igb2: EEPROM V1.67-0 Option ROM V16-b5-p20 eTrack 0x80000d66 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xfd800000-0xfd8fffff,0xfde00000-0xfde03fff irq 17 at device 0.3 on pci1 [...] igb3: EEPROM V1.67-0 Option ROM V16-b5-p20 eTrack 0x80000d66 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] alc0: <Atheros AR8161 PCIe Gigabit Ethernet> port 0xe000-0xe07f mem 0xfea00000-0xfea3ffff irq 19 at device 0.0 on pci2 [...] alc0: 11776 Tx FIFO, 12032 Rx FIFO [...] alc0: Using 1 MSIX message(s). [...] miibus0: <MII bus> on alc0 [...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 [...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] alc0: Using defaults for TSO: 65518/35/2048 [...] alc0: Ethernet address: ... [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfeb46000-0xfeb47fff irq 18 at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfeb44000-0xfeb45fff irq 17 at device 16.1 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb4d000-0xfeb4d7ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ohci0: <AMD FCH USB Controller> mem 0xfeb4c000-0xfeb4cfff irq 18 at device 18.0 on pci0 [...] usbus2 on ohci0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb4b000-0xfeb4b0ff irq 17 at device 18.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD FCH USB Controller> mem 0xfeb4a000-0xfeb4afff irq 18 at device 19.0 on pci0 [...] usbus4 on ohci1 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xfeb49000-0xfeb490ff irq 17 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] hdac0: <AMD Hudson-2 HDA Controller> mem 0xfeb40000-0xfeb43fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ohci2: <OHCI (generic) USB controller> mem 0xfeb48000-0xfeb48fff irq 18 at device 20.5 on pci0 [...] usbus6 on ohci2 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] pcib4: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 17 at device 1.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xfe600000-0xfe600fff,0xd0700000-0xd0703fff irq 17 at device 0.0 on pci6 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib7: <PCI-PCI bridge> irq 19 at device 3.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xa000-0xa0ff mem 0xfe500000-0xfe500fff,0xd0600000-0xd0603fff irq 19 at device 0.0 on pci7 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x4c000000 [...] re1: MAC rev. 0x00000000 [...] miibus2: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus2 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib8: <PCI-PCI bridge> irq 17 at device 5.0 on pci5 [...] pci8: <PCI bus> on pcib8 [...] re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x9000-0x90ff mem 0xfe400000-0xfe400fff,0xd0500000-0xd0503fff irq 17 at device 0.0 on pci8 [...] re2: Using 1 MSI-X message [...] re2: Chip rev. 0x4c000000 [...] re2: MAC rev. 0x00000000 [...] miibus3: <MII bus> on re2 [...] rgephy2: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus3 [...] rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re2: Using defaults for TSO: 65518/35/2048 [...] re2: Ethernet address: ... [...] re2: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib9: <PCI-PCI bridge> irq 19 at device 7.0 on pci5 [...] pci9: <PCI bus> on pcib9 [...] re3: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x8000-0x80ff mem 0xfe300000-0xfe300fff,0xd0400000-0xd0403fff irq 19 at device 0.0 on pci9 [...] re3: Using 1 MSI-X message [...] re3: Chip rev. 0x4c000000 [...] re3: MAC rev. 0x00000000 [...] miibus4: <MII bus> on re3 [...] rgephy3: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus4 [...] rgephy3: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re3: Using defaults for TSO: 65518/35/2048 [...] re3: Ethernet address: ... [...] re3: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib10: <ACPI PCI-PCI bridge> at device 21.1 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <PCI-PCI bridge> irq 17 at device 0.0 on pci10 [...] pci11: <PCI bus> on pcib11 [...] pcib12: <PCI-PCI bridge> irq 18 at device 1.0 on pci11 [...] pci12: <PCI bus> on pcib12 [...] re4: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x7000-0x70ff mem 0xfe200000-0xfe200fff,0xd0300000-0xd0303fff irq 18 at device 0.0 on pci12 [...] re4: Using 1 MSI-X message [...] re4: Chip rev. 0x4c000000 [...] re4: MAC rev. 0x00000000 [...] miibus5: <MII bus> on re4 [...] rgephy4: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus5 [...] rgephy4: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re4: Using defaults for TSO: 65518/35/2048 [...] re4: Ethernet address: ... [...] re4: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib13: <PCI-PCI bridge> irq 16 at device 3.0 on pci11 [...] pci13: <PCI bus> on pcib13 [...] re5: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x6000-0x60ff mem 0xfe100000-0xfe100fff,0xd0200000-0xd0203fff irq 16 at device 0.0 on pci13 [...] re5: Using 1 MSI-X message [...] re5: Chip rev. 0x4c000000 [...] re5: MAC rev. 0x00000000 [...] miibus6: <MII bus> on re5 [...] rgephy5: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus6 [...] rgephy5: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re5: Using defaults for TSO: 65518/35/2048 [...] re5: Ethernet address: ... [...] re5: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib14: <PCI-PCI bridge> irq 18 at device 5.0 on pci11 [...] pci14: <PCI bus> on pcib14 [...] re6: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x5000-0x50ff mem 0xfe000000-0xfe000fff,0xd0100000-0xd0103fff irq 18 at device 0.0 on pci14 [...] re6: Using 1 MSI-X message [...] re6: Chip rev. 0x4c000000 [...] re6: MAC rev. 0x00000000 [...] miibus7: <MII bus> on re6 [...] rgephy6: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus7 [...] rgephy6: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re6: Using defaults for TSO: 65518/35/2048 [...] re6: Ethernet address: ... [...] re6: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib15: <PCI-PCI bridge> irq 16 at device 7.0 on pci11 [...] pci15: <PCI bus> on pcib15 [...] re7: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xfdf00000-0xfdf00fff,0xd0000000-0xd0003fff irq 16 at device 0.0 on pci15 [...] re7: Using 1 MSI-X message [...] re7: Chip rev. 0x4c000000 [...] re7: MAC rev. 0x00000000 [...] miibus8: <MII bus> on re7 [...] rgephy7: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus8 [...] rgephy7: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re7: Using defaults for TSO: 65518/35/2048 [...] re7: Ethernet address: ... [...] re7: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib16: <ACPI PCI-PCI bridge> at device 21.2 on pci0 [...] pci16: <ACPI PCI bus> on pcib16 [...] pcib17: <PCI-PCI bridge> irq 18 at device 0.0 on pci16 [...] pci17: <PCI bus> on pcib17 [...] pcib18: <PCI-PCI bridge> irq 17 at device 3.0 on pci17 [...] pci18: <PCI bus> on pcib18 [...] re8: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe804000-0xfe804fff,0xfe800000-0xfe803fff irq 17 at device 0.0 on pci18 [...] re8: Using 1 MSI-X message [...] re8: Chip rev. 0x54000000 [...] re8: MAC rev. 0x00100000 [...] miibus9: <MII bus> on re8 [...] rgephy8: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus9 [...] rgephy8: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re8: Using defaults for TSO: 65518/35/2048 [...] re8: Ethernet address: ... [...] re8: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib19: <PCI-PCI bridge> irq 17 at device 7.0 on pci17 [...] pci19: <PCI bus> on pcib19 [...] re9: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xfe704000-0xfe704fff,0xfe700000-0xfe703fff irq 17 at device 0.0 on pci19 [...] re9: Using 1 MSI-X message [...] re9: Chip rev. 0x54000000 [...] re9: MAC rev. 0x00100000 [...] miibus10: <MII bus> on re9 [...] rgephy9: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus10 [...] rgephy9: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re9: Using defaults for TSO: 65518/35/2048 [...] re9: Ethernet address: ... [...] re9: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib20: <ACPI PCI-PCI bridge> at device 21.3 on pci0 [...] pci20: <ACPI PCI bus> on pcib20 [...] ral0: <Ralink Technology RT5390> mem 0xfe900000-0xfe90ffff irq 19 at device 0.0 on pci20 [...] ral0: MAC/BBP RT5390 (rev 0x1502), RF RT5390 (MIMO 1T1R), address XXX [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1796643855 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <IDT 92HD73E1 HDA CODEC> at cad 3 on hdac0 [...] hdaa0: <IDT 92HD73E1 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <IDT 92HD73E1 (Analog 7.1+HP/2.0)> at nid 12,16,15,17,10 and 11,14 on hdaa0 [...] pcm1: <IDT 92HD73E1 (Rear Analog Line-in)> at nid 13 on hdaa0 [...] pcm2: <IDT 92HD73E1 (Rear Digital)> at nid 34 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: usbus0 usbus1 CAM usbus2 usbus3 usbus4 usbus5 usbus6 [...] ugen5.1: <AMD EHCI root HUB> at usbus5 [...] ugen6.1: <AMD OHCI root HUB> at usbus6 [...] uhub0 on usbus5 [...] uhub1 on usbus6 [...] uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ugen4.1: <AMD OHCI root HUB> at usbus4 [...] uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub2 on usbus4 [...] uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen2.1: <AMD OHCI root HUB> at usbus2 [...] ugen3.1: <AMD EHCI root HUB> at usbus3 [...] uhub3 on usbus2 [...] uhub4 on usbus3 [...] uhub4: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub5 on usbus1 [...] uhub5: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] uhub6 on usbus0 [...] uhub6: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG SSD PM830 2.5" 7mm 128GB CXM02D1Q> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 5 ports with 5 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] uhub6: 4 ports with 4 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub6 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.07, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus3 usbus5 [...] uhub4: 5 ports with 5 removable, self powered [...] uhub0: 5 ports with 5 removable, self powered [...] ugen5.2: <Generic Mass Storage Device> at usbus5 [...] umass0 on uhub0 [...] umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus5 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:1:0: Attached to scbus1 [...] Root mount waiting for: CAM [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <Multiple Card Reader 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] mountroot: waiting for device /dev/gpt/rootfs...