[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/23.1-n250372-c4ad069e50a SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz (3500.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16504356864 (15739 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network> at device 0.0 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7c14000-0xf7c17fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Wildcat Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Wildcat Point USB 2.0 controller USB-B> mem 0xf7c1b000-0xf7c1b3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Wildcat Point HDA Controller> mem 0xf7c10000-0xf7c13fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xf7a00000-0xf7a03fff irq 16 at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7900000-0xf7900fff,0xf0100000-0xf0103fff irq 18 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 1.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> irq 18 at device 3.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 16 at device 5.0 on pci5 [...] pci8: <PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> irq 18 at device 7.0 on pci5 [...] pci9: <PCI bus> on pcib9 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7800000-0xf7800fff,0xf0000000-0xf0003fff irq 18 at device 0.0 on pci9 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x2c000000 [...] re1: MAC rev. 0x00200000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci1: <Intel Wildcat Point USB 2.0 controller USB-A> mem 0xf7c1a000-0xf7c1a3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7c19000-0xf7c197ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] device_attach: acpi_perf0 attach returned 6 [...] device_attach: acpi_perf1 attach returned 6 [...] device_attach: acpi_perf2 attach returned 6 [...] device_attach: acpi_perf3 attach returned 6 [...] device_attach: acpi_perf0 attach returned 6 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 265600002800 [...] device_attach: est0 attach returned 6 [...] device_attach: acpi_perf1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 265600002800 [...] device_attach: est1 attach returned 6 [...] device_attach: acpi_perf2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 265600002800 [...] device_attach: est2 attach returned 6 [...] device_attach: acpi_perf3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 265600002800 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1749998765 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] nvme0: Allocated 64MB host memory buffer [...] nvd0: <KINGSTON SNVS500G> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: pass0,cd0 in 'Slot 03', SATA Slot: scbus0 target 0 [...] cd0 at ahcich3 bus 0 scbus0 target 0 lun 0 [...] cd0: <HL-DT-ST DVDRAM GH24NSC0 LK00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: 0MB (1 0 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen0.2: <PixArt Dell MS116 USB Optical Mouse> at usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8009> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8001> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] ugen0.3: <vendor 0x413c Dell KB216 Wired Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 2.00/33.08, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] uhub4: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Ultra USB 3.0 (0x0781:0x5591) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Ultra USB 3.0 (0x0781:0x5591) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device SanDisk Ultra USB 3.0 (0x0781:0x5591) [...] ugen0.4: <SanDisk Ultra USB 3.0> at usbus0 [...] umass0 on uhub1 [...] umass0: <SanDisk Ultra USB 3.0, class 0/0, rev 3.00/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <SanDisk Ultra USB 3.0 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 59232MB (121307136 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT header is not in the last LBA.