[...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7f11000-0xf7f117ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696146802 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] (aprobe1:ahcich1:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): CAM status: ATA Status Error [...] (aprobe1:ahcich1:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) [...] (aprobe1:ahcich1:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): Retrying command, 0 more tries remain [...] (aprobe1:ahcich1:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): CAM status: ATA Status Error [...] (aprobe1:ahcich1:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) [...] (aprobe1:ahcich1:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): Error 5, Retries exhausted [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SPCCSolidStateDisk SBFQE1.2> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <ST1000LM024 HN-M101MBB 2BA30001> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada2: <SSDPR-CX400-512 SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 488386MB (1000215216 512 byte sectors) [...] ada3 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada3: <WDC WD10EZEX-08M2NA0 01.01A01> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 953869MB (1953525168 512 byte sectors) [...] ada4 at ahcich5 bus 0 scbus5 target 0 lun 0 [...] ada4: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device [...] ada4: Serial Number... [...] ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada4: Command Queueing enabled [...] ada4: 953869MB (1953525168 512 byte sectors) [...] ada4: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: cd0,pass2 in 'Slot 02', SATA Slot: scbus2 target 0 [...] ses0: ada2,pass3 in 'Slot 03', SATA Slot: scbus3 target 0 [...] ses0: ada3,pass4 in 'Slot 04', SATA Slot: scbus4 target 0 [...] ses0: ada4,pass5 in 'Slot 05', SATA Slot: scbus5 target 0 [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <ATAPI iHAS124 B AL0S> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] GEOM_LABEL[1]: MSDOSFS: ada1: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1 is diskid/XXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada1s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada3: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider ada3 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada2: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2 is diskid/XXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada4: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada4 is diskid/XXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0p1 is gpt/EFI%20system%20partition. [...] GEOM_LABEL[1]: Label for provider ada0p1 is gptid/HASH_27A-2503-A509-5BE9-BDC8EDB97487. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT32 volume has no name. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gpt/Microsoft%20reserved%20partition. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gptid/HASH_43B-1B5F-3EFF-2BB4-526051EC3175. [...] GEOM_LABEL[1]: MSDOSFS: ada0p2: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ada0p3 is gpt/Basic%20data%20partition. [...] GEOM_LABEL[1]: Label for provider ada0p3 is gptid/HASH_A7D-26FD-C10F-640D-9B298FA0FB03. [...] GEOM_LABEL[1]: MSDOSFS: ada0p3: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0p4 is gptid/HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87. [...] GEOM_LABEL[1]: MSDOSFS: ada0p4: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada3s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada3s1 is ntfs/Storage. [...] GEOM_LABEL[1]: Label for provider ada2p1 is gpt/efiboot0. [...] GEOM_LABEL[1]: Label for provider ada2p1 is gptid/HASH_242-E835-2EE3-212E-5076EE937F2A. [...] GEOM_LABEL[1]: MSDOSFS: ada2p1: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: ada2p1: FAT12/16 volume has no name. [...] GEOM_LABEL[1]: Label for provider ada2p2 is gpt/gptboot0. [...] GEOM_LABEL[1]: Label for provider ada2p2 is gptid/HASH_29B-492E-9DFD-6836-061273D6B63B. [...] GEOM_LABEL[1]: MSDOSFS: ada2p2: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ada2p3 is gpt/zfs0. [...] GEOM_LABEL[1]: Label for provider ada2p3 is gptid/HASH_FDD-E783-0355-D03D-0242457314EC. [...] GEOM_LABEL[1]: MSDOSFS: ada2p3: no FAT signature found. [...] uhub1: 8 ports with 8 removable, self powered [...] GEOM_LABEL[1]: MSDOSFS: ada4s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada4s3: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label EFI%20system%20partition(gpt/EFI%20system%20partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_27A-2503-A509-5BE9-BDC8EDB97487(gptid/HASH_27A-2503-A509-5BE9-BDC8EDB97487) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume has no name. [...] GEOM_LABEL[1]: Label Microsoft%20reserved%20partition(gpt/Microsoft%20reserved%20partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_43B-1B5F-3EFF-2BB4-526051EC3175(gptid/HASH_43B-1B5F-3EFF-2BB4-526051EC3175) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label Basic%20data%20partition(gpt/Basic%20data%20partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_A7D-26FD-C10F-640D-9B298FA0FB03(gptid/HASH_A7D-26FD-C10F-640D-9B298FA0FB03) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87(gptid/HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label Storage(ntfs/Storage) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label efiboot0(gpt/efiboot0) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_242-E835-2EE3-212E-5076EE937F2A(gptid/HASH_242-E835-2EE3-212E-5076EE937F2A) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX FAT12/16 volume has no name. [...] GEOM_LABEL[1]: Label gptboot0(gpt/gptboot0) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_29B-492E-9DFD-6836-061273D6B63B(gptid/HASH_29B-492E-9DFD-6836-061273D6B63B) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label zfs0(gpt/zfs0) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_FDD-E783-0355-D03D-0242457314EC(gptid/HASH_FDD-E783-0355-D03D-0242457314EC) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT32 volume not valid. [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus1 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] uhub4: 8 ports with 8 removable, self powered [...] ugen1.3: <Corsair CORSAIR M55 RGB PRO Gaming Mouse> at usbus1 [...] ukbd0 on uhub3 [...] ukbd0: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.4: <VIA Labs, Inc. USB2.0 Hub> at usbus1 [...] uhub5 on uhub3 [...] uhub5: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/7.94, addr 4> on usbus1 [...] uhub5: MTT enabled [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] uhub5: 4 ports with 4 removable, self powered [...] ugen1.5: <Logitech USB Receiver> at usbus1 [...] ukbd1 on uhub5 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 5> on usbus1 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus1 [...] ugen1.6: <RAPOO Rapoo 2.4G Wireless Device> at usbus1 [...] ukbd2 on uhub5 [...] ukbd2: <RAPOO Rapoo 2.4G Wireless Device, class 0/0, rev 2.00/1.10, addr 6> on usbus1 [...] kbd4 at ukbd2 [...] ukbd3 on uhub5 [...] ukbd3: <RAPOO Rapoo 2.4G Wireless Device, class 0/0, rev 2.00/1.10, addr 6> on usbus1 [...] kbd5 at ukbd3 [...] ugen1.7: <Realtek ASUS USB-BT500> at usbus1 [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label gptid/HASH_FDD-E783-0355-D03D-0242457314EC removed. [...] GEOM_LABEL[1]: Label gpt/zfs0 removed. [...] Cuse v0.1.37 @ /dev/cuse [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf000-0xf01f mem 0xf7f10000-0xf7f100ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] re0: link state changed to UP [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ums0 on uhub3 [...] ums0: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] ums0: 31 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub3 [...] uhid0: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] uhid1 on uhub3 [...] uhid1: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] ums1 on uhub5 [...] ums1: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 5> on usbus1 [...] ums1: 16 buttons and [XYZT] coordinates ID=2 [...] uhid2 on uhub5 [...] uhid2: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 5> on usbus1 [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/Storage removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label gptid/HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87 removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXX removed. [...] ums2 on uhub5 [...] ums2: <RAPOO Rapoo 2.4G Wireless Device, class 0/0, rev 2.00/1.10, addr 6> on usbus1 [...] ums2: 5 buttons and [XYZ] coordinates ID=0 [...] GEOM_LABEL[1]: Label gptid/HASH_A7D-26FD-C10F-640D-9B298FA0FB03 removed. [...] GEOM_LABEL[1]: Label gpt/Basic%20data%20partition removed. [...] ubt0 on uhub5 [...] ubt0: <Bluetooth Radio> on usbus1 [...] ichwd0: <Intel Panther Point watchdog timer> on isa0 [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC580 0xE7). [...] drmn0: Trusted Memory Zone (TMZ) feature not supported [...] [drm] register mmio base: 0xF7E00000 [...] [drm] register mmio size: 262144 [...] [drm] add ip block number 0 <vi_common> [...] [drm] add ip block number 1 <gmc_v8_0> [...] [drm] add ip block number 2 <tonga_ih> [...] [drm] add ip block number 3 <gfx_v8_0> [...] [drm] add ip block number 4 <sdma_v3_0> [...] [drm] add ip block number 5 <powerplay> [...] [drm] add ip block number 6 <dm> [...] [drm] add ip block number 7 <uvd_v6_0> [...] [drm] add ip block number 8 <vce_v3_0> [...] drmn0: Fetched VBIOS from ROM BAR [...] amdgpu: ATOM BIOS: 113-58085SHD1-W90 [...] [drm] UVD is enabled in VM mode [...] [drm] UVD ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin' [...] drmn0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [...] drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [...] [drm] Detected VRAM RAM=8192M, BAR=256M [...] [drm] RAM width 256bits GDDR5 [...] [TTM] Zone kernel: Available graphics memory: 6244232 KiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 8192M of VRAM memory ready [...] [drm] amdgpu: 8192M of GTT memory ready. [...] [drm] GART: num cpu pages 65536, num gpu pages 65536 [...] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin' [...] [drm] Chained IB support enabled! [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin' [...] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin' [...] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin' [...] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin' [...] [drm] Display Core initialized with v3.2.104! [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] [drm] UVD and UVD ENC initialized successfully. [...] [drm] VCE initialized successfully. [...] drmn0: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36 [...] [drm] fb mappable at 0xE0830000 [...] [drm] vram apper at 0xE0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0xe0830000 vbase=0xfffff800e0830000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] vgapci0: child drmn0 requested pci_get_powerstate [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic5: <LinuxKPI I2C> on drm1 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drm2 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iic7: <LinuxKPI I2C> on drm3 [...] iicbus7: <Philips I2C bus> on lkpi_iic7 [...] iic7: <I2C generic I/O> on iicbus7 [...] [drm] Initialized amdgpu 3.40.0 20150101 for drmn0 on minor 0 [...] pid 3149 (python3.9), jid 0, uid 1001: exited on signal 6 (no core dump - bad address) [...] ugen0.2: <Kingston DataTraveler 3.0> at usbus0 [...] umass0 on uhub1 [...] umass0: <Kingston DataTraveler 3.0, class 0/0, rev 3.20/11.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc000 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <Kingston DataTraveler 3.0 1100> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 118093MB (241854636 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM_LABEL[1]: ISO9660 file system detected on da0. [...] GEOM_LABEL[1]: Label for provider da0 is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: da0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider da0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label for provider da0p1 is gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2. [...] GEOM_LABEL[1]: MSDOSFS: da0p1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider da0p2 is gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0. [...] GEOM_LABEL[1]: MSDOSFS: da0p2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0p2 is msdosfs/EFISYS. [...] GEOM_LABEL[1]: Label HASH_A6C-8A82-B15F-2118-77A70ED453A2(gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_C10-F528-E24E-32D2-F2B3F220F3C0(gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: Label HASH_A6C-8A82-B15F-2118-77A70ED453A2(gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_C10-F528-E24E-32D2-F2B3F220F3C0(gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (3392.40-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12409008128 (11834 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 4 7 6 2 3 5 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xf7e00000-0xf7e3ffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xf7e60000-0xf7e63fff irq 17 at device 0.1 on pci1 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7f13000-0xf7f133ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7d04000-0xf7d04fff,0xf7d00000-0xf7d03fff irq 17 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7f12000-0xf7f123ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7f11000-0xf7f117ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696146786 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] Trying to mount root from cd9660:/dev/iso9660/LIVE []... [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] random: unblocking device. [...] (aprobe1:ahcich1:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): CAM status: ATA Status Error [...] (aprobe1:ahcich1:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) [...] (aprobe1:ahcich1:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): Retrying command, 0 more tries remain [...] (aprobe1:ahcich1:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): CAM status: ATA Status Error [...] (aprobe1:ahcich1:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) [...] (aprobe1:ahcich1:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): Error 5, Retries exhausted [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SPCCSolidStateDisk SBFQE1.2> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <ST1000LM024 HN-M101MBB 2BA30001> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada2: <SSDPR-CX400-512 SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 488386MB (1000215216 512 byte sectors) [...] ada3 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada3: <WDC WD10EZEX-08M2NA0 01.01A01> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 953869MB (1953525168 512 byte sectors) [...] ada4 at ahcich5 bus 0 scbus5 target 0 lun 0 [...] ada4: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device [...] ada4: Serial Number... [...] ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada4: Command Queueing enabled [...] ada4: 953869MB (1953525168 512 byte sectors) [...] ada4: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: cd0,pass2 in 'Slot 02', SATA Slot: scbus2 target 0 [...] ses0: ada2,pass3 in 'Slot 03', SATA Slot: scbus3 target 0 [...] ses0: ada3,pass4 in 'Slot 04', SATA Slot: scbus4 target 0 [...] ses0: ada4,pass5 in 'Slot 05', SATA Slot: scbus5 target 0 [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <ATAPI iHAS124 B AL0S> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] GEOM_LABEL[1]: MSDOSFS: ada1: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1 is diskid/XXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada1s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada3: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider ada3 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada2: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2 is diskid/XXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada4: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada4 is diskid/XXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0p1 is gpt/EFI%20system%20partition. [...] GEOM_LABEL[1]: Label for provider ada0p1 is gptid/HASH_27A-2503-A509-5BE9-BDC8EDB97487. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT32 volume has no name. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gpt/Microsoft%20reserved%20partition. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gptid/HASH_43B-1B5F-3EFF-2BB4-526051EC3175. [...] GEOM_LABEL[1]: MSDOSFS: ada0p2: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ada0p3 is gpt/Basic%20data%20partition. [...] GEOM_LABEL[1]: Label for provider ada0p3 is gptid/HASH_A7D-26FD-C10F-640D-9B298FA0FB03. [...] GEOM_LABEL[1]: MSDOSFS: ada0p3: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0p4 is gptid/HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87. [...] GEOM_LABEL[1]: MSDOSFS: ada0p4: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada3s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada3s1 is ntfs/Storage. [...] GEOM_LABEL[1]: Label for provider ada2p1 is gpt/efiboot0. [...] GEOM_LABEL[1]: Label for provider ada2p1 is gptid/HASH_242-E835-2EE3-212E-5076EE937F2A. [...] GEOM_LABEL[1]: MSDOSFS: ada2p1: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: ada2p1: FAT12/16 volume has no name. [...] GEOM_LABEL[1]: Label for provider ada2p2 is gpt/gptboot0. [...] GEOM_LABEL[1]: Label for provider ada2p2 is gptid/HASH_29B-492E-9DFD-6836-061273D6B63B. [...] GEOM_LABEL[1]: MSDOSFS: ada2p2: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ada2p3 is gpt/zfs0. [...] GEOM_LABEL[1]: Label for provider ada2p3 is gptid/HASH_FDD-E783-0355-D03D-0242457314EC. [...] GEOM_LABEL[1]: MSDOSFS: ada2p3: no FAT signature found. [...] uhub2: 8 ports with 8 removable, self powered [...] GEOM_LABEL[1]: MSDOSFS: ada4s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada4s3: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label EFI%20system%20partition(gpt/EFI%20system%20partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_27A-2503-A509-5BE9-BDC8EDB97487(gptid/HASH_27A-2503-A509-5BE9-BDC8EDB97487) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume has no name. [...] GEOM_LABEL[1]: Label Microsoft%20reserved%20partition(gpt/Microsoft%20reserved%20partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_43B-1B5F-3EFF-2BB4-526051EC3175(gptid/HASH_43B-1B5F-3EFF-2BB4-526051EC3175) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label Basic%20data%20partition(gpt/Basic%20data%20partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_A7D-26FD-C10F-640D-9B298FA0FB03(gptid/HASH_A7D-26FD-C10F-640D-9B298FA0FB03) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87(gptid/HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label Storage(ntfs/Storage) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label efiboot0(gpt/efiboot0) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_242-E835-2EE3-212E-5076EE937F2A(gptid/HASH_242-E835-2EE3-212E-5076EE937F2A) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX FAT12/16 volume has no name. [...] GEOM_LABEL[1]: Label gptboot0(gpt/gptboot0) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_29B-492E-9DFD-6836-061273D6B63B(gptid/HASH_29B-492E-9DFD-6836-061273D6B63B) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label zfs0(gpt/zfs0) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_FDD-E783-0355-D03D-0242457314EC(gptid/HASH_FDD-E783-0355-D03D-0242457314EC) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT32 volume not valid. [...] ugen0.2: <Kingston DataTraveler 3.0> at usbus0 [...] umass0 on uhub2 [...] umass0: <Kingston DataTraveler 3.0, class 0/0, rev 3.20/11.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc000 [...] umass0:7:0: Attached to scbus7 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <Kingston DataTraveler 3.0 1100> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 118093MB (241854636 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM_LABEL[1]: ISO9660 file system detected on da0. [...] GEOM_LABEL[1]: Label for provider da0 is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: da0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider da0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label for provider da0p1 is gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2. [...] GEOM_LABEL[1]: MSDOSFS: da0p1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider da0p2 is gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0. [...] GEOM_LABEL[1]: MSDOSFS: da0p2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0p2 is msdosfs/EFISYS. [...] GEOM_LABEL[1]: Label HASH_A6C-8A82-B15F-2118-77A70ED453A2(gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_C10-F528-E24E-32D2-F2B3F220F3C0(gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: Label HASH_A6C-8A82-B15F-2118-77A70ED453A2(gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_C10-F528-E24E-32D2-F2B3F220F3C0(gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus1 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ugen1.3: <Corsair CORSAIR M55 RGB PRO Gaming Mouse> at usbus1 [...] ukbd0 on uhub3 [...] ukbd0: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.4: <VIA Labs, Inc. USB2.0 Hub> at usbus1 [...] uhub5 on uhub3 [...] uhub5: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/7.94, addr 4> on usbus1 [...] uhub5: MTT enabled [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] uhub5: 4 ports with 4 removable, self powered [...] ugen1.5: <Logitech USB Receiver> at usbus1 [...] ukbd1 on uhub5 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 5> on usbus1 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus1 [...] ugen1.6: <RAPOO Rapoo 2.4G Wireless Device> at usbus1 [...] ukbd2 on uhub5 [...] ukbd2: <RAPOO Rapoo 2.4G Wireless Device, class 0/0, rev 2.00/1.10, addr 6> on usbus1 [...] kbd4 at ukbd2 [...] ukbd3 on uhub5 [...] ukbd3: <RAPOO Rapoo 2.4G Wireless Device, class 0/0, rev 2.00/1.10, addr 6> on usbus1 [...] kbd5 at ukbd3 [...] ugen1.7: <Realtek ASUS USB-BT500> at usbus1 [...] GEOM_LABEL[1]: MSDOSFS: md0: no FAT signature found. [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: Label for provider md0.uzip is ufsid/XXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: MSDOSFS: md0.uzip: no FAT signature found. [...] Cuse v0.1.37 @ /dev/cuse [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf000-0xf01f mem 0xf7f10000-0xf7f100ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC580 0xE7). [...] drmn0: Trusted Memory Zone (TMZ) feature not supported [...] [drm] register mmio base: 0xF7E00000 [...] [drm] register mmio size: 262144 [...] [drm] add ip block number 0 <vi_common> [...] [drm] add ip block number 1 <gmc_v8_0> [...] [drm] add ip block number 2 <tonga_ih> [...] [drm] add ip block number 3 <gfx_v8_0> [...] [drm] add ip block number 4 <sdma_v3_0> [...] [drm] add ip block number 5 <powerplay> [...] [drm] add ip block number 6 <dm> [...] [drm] add ip block number 7 <uvd_v6_0> [...] [drm] add ip block number 8 <vce_v3_0> [...] drmn0: Fetched VBIOS from ROM BAR [...] amdgpu: ATOM BIOS: 113-58085SHD1-W90 [...] [drm] UVD is enabled in VM mode [...] [drm] UVD ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin' [...] drmn0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [...] drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [...] [drm] Detected VRAM RAM=8192M, BAR=256M [...] [drm] RAM width 256bits GDDR5 [...] [TTM] Zone kernel: Available graphics memory: 6247304 KiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 8192M of VRAM memory ready [...] [drm] amdgpu: 8192M of GTT memory ready. [...] [drm] GART: num cpu pages 65536, num gpu pages 65536 [...] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin' [...] [drm] Chained IB support enabled! [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin' [...] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin' [...] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin' [...] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin' [...] [drm] Display Core initialized with v3.2.104! [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] [drm] UVD and UVD ENC initialized successfully. [...] [drm] VCE initialized successfully. [...] drmn0: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36 [...] [drm] fb mappable at 0xE0830000 [...] [drm] vram apper at 0xE0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0xe0830000 vbase=0xfffff800e0830000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] vgapci0: child drmn0 requested pci_get_powerstate [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic5: <LinuxKPI I2C> on drm1 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drm2 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iic7: <LinuxKPI I2C> on drm3 [...] iicbus7: <Philips I2C bus> on lkpi_iic7 [...] iic7: <I2C generic I/O> on iicbus7 [...] [drm] Initialized amdgpu 3.40.0 20150101 for drmn0 on minor 0 [...] re0: link state changed to UP [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ums0 on uhub3 [...] ums0: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] ums0: 31 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub3 [...] uhid0: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] uhid1 on uhub3 [...] uhid1: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] ums1 on uhub5 [...] ums1: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 5> on usbus1 [...] ums1: 16 buttons and [XYZT] coordinates ID=2 [...] uhid2 on uhub5 [...] uhid2: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 5> on usbus1 [...] ums2 on uhub5 [...] ums2: <RAPOO Rapoo 2.4G Wireless Device, class 0/0, rev 2.00/1.10, addr 6> on usbus1 [...] ums2: 5 buttons and [XYZ] coordinates ID=0 [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label gptid/HASH_A7D-26FD-C10F-640D-9B298FA0FB03 removed. [...] GEOM_LABEL[1]: Label gpt/Basic%20data%20partition removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/Storage removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label gptid/HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87 removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXX removed. [...] ubt0 on uhub5 [...] ubt0: <Bluetooth Radio> on usbus1 [...] ichwd0: <Intel Panther Point watchdog timer> on isa0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] pid 780 (Menu), jid 0, uid 1000: exited on signal 11 (no core dump - bad address) [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (3392.38-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12402724864 (11828 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 5 7 6 2 3 4 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xf7e00000-0xf7e3ffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xf7e60000-0xf7e63fff irq 17 at device 0.1 on pci1 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7f13000-0xf7f133ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7d04000-0xf7d04fff,0xf7d00000-0xf7d03fff irq 17 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7f12000-0xf7f123ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7f11000-0xf7f117ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696146368 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] (aprobe1:ahcich1:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): CAM status: ATA Status Error [...] (aprobe1:ahcich1:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) [...] (aprobe1:ahcich1:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): Retrying command, 0 more tries remain [...] (aprobe1:ahcich1:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): CAM status: ATA Status Error [...] (aprobe1:ahcich1:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) [...] (aprobe1:ahcich1:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): Error 5, Retries exhausted [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SPCCSolidStateDisk SBFQE1.2> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <ST1000LM024 HN-M101MBB 2BA30001> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada2: <SSDPR-CX400-512 SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 488386MB (1000215216 512 byte sectors) [...] ada3 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada3: <WDC WD10EZEX-08M2NA0 01.01A01> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 953869MB (1953525168 512 byte sectors) [...] ada4 at ahcich5 bus 0 scbus5 target 0 lun 0 [...] ada4: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device [...] ada4: Serial Number... [...] ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada4: Command Queueing enabled [...] ada4: 953869MB (1953525168 512 byte sectors) [...] ada4: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: cd0,pass2 in 'Slot 02', SATA Slot: scbus2 target 0 [...] ses0: ada2,pass3 in 'Slot 03', SATA Slot: scbus3 target 0 [...] ses0: ada3,pass4 in 'Slot 04', SATA Slot: scbus4 target 0 [...] ses0: ada4,pass5 in 'Slot 05', SATA Slot: scbus5 target 0 [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <ATAPI iHAS124 B AL0S> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] GEOM_LABEL[1]: MSDOSFS: ada1: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1 is diskid/XXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada1s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada3: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider ada3 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada2: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2 is diskid/XXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada4: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada4 is diskid/XXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0p1 is gpt/EFI%20system%20partition. [...] GEOM_LABEL[1]: Label for provider ada0p1 is gptid/HASH_27A-2503-A509-5BE9-BDC8EDB97487. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT32 volume has no name. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gpt/Microsoft%20reserved%20partition. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gptid/HASH_43B-1B5F-3EFF-2BB4-526051EC3175. [...] GEOM_LABEL[1]: MSDOSFS: ada0p2: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ada0p3 is gpt/Basic%20data%20partition. [...] GEOM_LABEL[1]: Label for provider ada0p3 is gptid/HASH_A7D-26FD-C10F-640D-9B298FA0FB03. [...] GEOM_LABEL[1]: MSDOSFS: ada0p3: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0p4 is gptid/HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87. [...] GEOM_LABEL[1]: MSDOSFS: ada0p4: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada3s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada3s1 is ntfs/Storage. [...] GEOM_LABEL[1]: Label for provider ada2p1 is gpt/efiboot0. [...] GEOM_LABEL[1]: Label for provider ada2p1 is gptid/HASH_242-E835-2EE3-212E-5076EE937F2A. [...] GEOM_LABEL[1]: MSDOSFS: ada2p1: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: ada2p1: FAT12/16 volume has no name. [...] GEOM_LABEL[1]: Label for provider ada2p2 is gpt/gptboot0. [...] GEOM_LABEL[1]: Label for provider ada2p2 is gptid/HASH_29B-492E-9DFD-6836-061273D6B63B. [...] GEOM_LABEL[1]: MSDOSFS: ada2p2: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ada2p3 is gpt/zfs0. [...] GEOM_LABEL[1]: Label for provider ada2p3 is gptid/HASH_FDD-E783-0355-D03D-0242457314EC. [...] GEOM_LABEL[1]: MSDOSFS: ada2p3: no FAT signature found. [...] uhub0: 8 ports with 8 removable, self powered [...] GEOM_LABEL[1]: MSDOSFS: ada4s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada4s3: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label EFI%20system%20partition(gpt/EFI%20system%20partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_27A-2503-A509-5BE9-BDC8EDB97487(gptid/HASH_27A-2503-A509-5BE9-BDC8EDB97487) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume has no name. [...] GEOM_LABEL[1]: Label Microsoft%20reserved%20partition(gpt/Microsoft%20reserved%20partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_43B-1B5F-3EFF-2BB4-526051EC3175(gptid/HASH_43B-1B5F-3EFF-2BB4-526051EC3175) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label Basic%20data%20partition(gpt/Basic%20data%20partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_A7D-26FD-C10F-640D-9B298FA0FB03(gptid/HASH_A7D-26FD-C10F-640D-9B298FA0FB03) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87(gptid/HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label Storage(ntfs/Storage) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label efiboot0(gpt/efiboot0) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_242-E835-2EE3-212E-5076EE937F2A(gptid/HASH_242-E835-2EE3-212E-5076EE937F2A) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX FAT12/16 volume has no name. [...] GEOM_LABEL[1]: Label gptboot0(gpt/gptboot0) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_29B-492E-9DFD-6836-061273D6B63B(gptid/HASH_29B-492E-9DFD-6836-061273D6B63B) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label zfs0(gpt/zfs0) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_FDD-E783-0355-D03D-0242457314EC(gptid/HASH_FDD-E783-0355-D03D-0242457314EC) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT32 volume not valid. [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus1 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] uhub4: 8 ports with 8 removable, self powered [...] ugen1.3: <Corsair CORSAIR M55 RGB PRO Gaming Mouse> at usbus1 [...] ukbd0 on uhub3 [...] ukbd0: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.4: <VIA Labs, Inc. USB2.0 Hub> at usbus1 [...] uhub5 on uhub3 [...] uhub5: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/7.94, addr 4> on usbus1 [...] uhub5: MTT enabled [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] uhub5: 4 ports with 4 removable, self powered [...] ugen1.5: <Logitech USB Receiver> at usbus1 [...] ukbd1 on uhub5 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 5> on usbus1 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus1 [...] ugen1.6: <RAPOO Rapoo 2.4G Wireless Device> at usbus1 [...] ukbd2 on uhub5 [...] ukbd2: <RAPOO Rapoo 2.4G Wireless Device, class 0/0, rev 2.00/1.10, addr 6> on usbus1 [...] kbd4 at ukbd2 [...] ukbd3 on uhub5 [...] ukbd3: <RAPOO Rapoo 2.4G Wireless Device, class 0/0, rev 2.00/1.10, addr 6> on usbus1 [...] kbd5 at ukbd3 [...] ugen1.7: <Realtek ASUS USB-BT500> at usbus1 [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label gptid/HASH_FDD-E783-0355-D03D-0242457314EC removed. [...] GEOM_LABEL[1]: Label gpt/zfs0 removed. [...] Cuse v0.1.37 @ /dev/cuse [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf000-0xf01f mem 0xf7f10000-0xf7f100ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] re0: link state changed to UP [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ums0 on uhub3 [...] ums0: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] ums0: 31 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub3 [...] uhid0: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] uhid1 on uhub3 [...] uhid1: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] ums1 on uhub5 [...] ums1: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 5> on usbus1 [...] ums1: 16 buttons and [XYZT] coordinates ID=2 [...] uhid2 on uhub5 [...] uhid2: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 5> on usbus1 [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/Storage removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label gptid/HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87 removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label gptid/HASH_A7D-26FD-C10F-640D-9B298FA0FB03 removed. [...] GEOM_LABEL[1]: Label gpt/Basic%20data%20partition removed. [...] ums2 on uhub5 [...] ums2: <RAPOO Rapoo 2.4G Wireless Device, class 0/0, rev 2.00/1.10, addr 6> on usbus1 [...] ums2: 5 buttons and [XYZ] coordinates ID=0 [...] ubt0 on uhub5 [...] ubt0: <Bluetooth Radio> on usbus1 [...] ichwd0: <Intel Panther Point watchdog timer> on isa0 [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC580 0xE7). [...] drmn0: Trusted Memory Zone (TMZ) feature not supported [...] [drm] register mmio base: 0xF7E00000 [...] [drm] register mmio size: 262144 [...] [drm] add ip block number 0 <vi_common> [...] [drm] add ip block number 1 <gmc_v8_0> [...] [drm] add ip block number 2 <tonga_ih> [...] [drm] add ip block number 3 <gfx_v8_0> [...] [drm] add ip block number 4 <sdma_v3_0> [...] [drm] add ip block number 5 <powerplay> [...] [drm] add ip block number 6 <dm> [...] [drm] add ip block number 7 <uvd_v6_0> [...] [drm] add ip block number 8 <vce_v3_0> [...] drmn0: Fetched VBIOS from ROM BAR [...] amdgpu: ATOM BIOS: 113-58085SHD1-W90 [...] [drm] UVD is enabled in VM mode [...] [drm] UVD ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin' [...] drmn0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [...] drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [...] [drm] Detected VRAM RAM=8192M, BAR=256M [...] [drm] RAM width 256bits GDDR5 [...] [TTM] Zone kernel: Available graphics memory: 6244232 KiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 8192M of VRAM memory ready [...] [drm] amdgpu: 8192M of GTT memory ready. [...] [drm] GART: num cpu pages 65536, num gpu pages 65536 [...] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin' [...] [drm] Chained IB support enabled! [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin' [...] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin' [...] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin' [...] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin' [...] [drm] Display Core initialized with v3.2.104! [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] [drm] UVD and UVD ENC initialized successfully. [...] [drm] VCE initialized successfully. [...] drmn0: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36 [...] [drm] fb mappable at 0xE0830000 [...] [drm] vram apper at 0xE0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0xe0830000 vbase=0xfffff800e0830000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] vgapci0: child drmn0 requested pci_get_powerstate [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic5: <LinuxKPI I2C> on drm1 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drm2 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iic7: <LinuxKPI I2C> on drm3 [...] iicbus7: <Philips I2C bus> on lkpi_iic7 [...] iic7: <I2C generic I/O> on iicbus7 [...] [drm] Initialized amdgpu 3.40.0 20150101 for drmn0 on minor 0 [...] ugen0.2: <Kingston DataTraveler 3.0> at usbus0 [...] umass0 on uhub0 [...] umass0: <Kingston DataTraveler 3.0, class 0/0, rev 3.20/11.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc000 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <Kingston DataTraveler 3.0 1100> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 118093MB (241854636 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM_LABEL[1]: ISO9660 file system detected on da0. [...] GEOM_LABEL[1]: Label for provider da0 is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: da0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider da0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label for provider da0p1 is gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2. [...] GEOM_LABEL[1]: MSDOSFS: da0p1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider da0p2 is gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0. [...] GEOM_LABEL[1]: MSDOSFS: da0p2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0p2 is msdosfs/EFISYS. [...] GEOM_LABEL[1]: Label HASH_A6C-8A82-B15F-2118-77A70ED453A2(gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_C10-F528-E24E-32D2-F2B3F220F3C0(gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: Label HASH_A6C-8A82-B15F-2118-77A70ED453A2(gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_C10-F528-E24E-32D2-F2B3F220F3C0(gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] ugen0.2: <Kingston DataTraveler 3.0> at usbus0 (disconnected) [...] umass0: at uhub0, port 5, addr 1 (disconnected) [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <Kingston DataTraveler 3.0 1100> s/n ... detached [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label iso9660/LIVE removed. [...] GEOM_LABEL[1]: Label gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2 removed. [...] GEOM_LABEL[1]: Label msdosfs/EFISYS removed. [...] GEOM_LABEL[1]: Label gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0 removed. [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.2: <Kingston DataTraveler 3.0> at usbus0 [...] umass0 on uhub0 [...] umass0: <Kingston DataTraveler 3.0, class 0/0, rev 3.20/11.00, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc000 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <Kingston DataTraveler 3.0 1100> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 118093MB (241854636 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM_LABEL[1]: ISO9660 file system detected on da0. [...] GEOM_LABEL[1]: Label for provider da0 is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: da0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider da0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label for provider da0p1 is gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2. [...] GEOM_LABEL[1]: MSDOSFS: da0p1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider da0p2 is gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0. [...] GEOM_LABEL[1]: MSDOSFS: da0p2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0p2 is msdosfs/EFISYS. [...] GEOM_LABEL[1]: Label HASH_A6C-8A82-B15F-2118-77A70ED453A2(gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_C10-F528-E24E-32D2-F2B3F220F3C0(gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: Label HASH_A6C-8A82-B15F-2118-77A70ED453A2(gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_C10-F528-E24E-32D2-F2B3F220F3C0(gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (3392.48-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12409008128 (11834 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 6 7 4 5 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xf7e00000-0xf7e3ffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xf7e60000-0xf7e63fff irq 17 at device 0.1 on pci1 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7f13000-0xf7f133ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7d04000-0xf7d04fff,0xf7d00000-0xf7d03fff irq 17 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7f12000-0xf7f123ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7f11000-0xf7f117ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696146762 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] Trying to mount root from cd9660:/dev/iso9660/LIVE []... [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] (aprobe1:ahcich1:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): CAM status: ATA Status Error [...] (aprobe1:ahcich1:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) [...] (aprobe1:ahcich1:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): Retrying command, 0 more tries remain [...] (aprobe1:ahcich1:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): CAM status: ATA Status Error [...] (aprobe1:ahcich1:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) [...] (aprobe1:ahcich1:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 [...] (aprobe1:ahcich1:0:0:0): Error 5, Retries exhausted [...] random: unblocking device. [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SPCCSolidStateDisk SBFQE1.2> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <ST1000LM024 HN-M101MBB 2BA30001> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada2: <SSDPR-CX400-512 SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 488386MB (1000215216 512 byte sectors) [...] ada3 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada3: <WDC WD10EZEX-08M2NA0 01.01A01> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 953869MB (1953525168 512 byte sectors) [...] ada4 at ahcich5 bus 0 scbus5 target 0 lun 0 [...] ada4: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device [...] ada4: Serial Number... [...] ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada4: Command Queueing enabled [...] ada4: 953869MB (1953525168 512 byte sectors) [...] ada4: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: cd0,pass2 in 'Slot 02', SATA Slot: scbus2 target 0 [...] ses0: ada2,pass3 in 'Slot 03', SATA Slot: scbus3 target 0 [...] ses0: ada3,pass4 in 'Slot 04', SATA Slot: scbus4 target 0 [...] ses0: ada4,pass5 in 'Slot 05', SATA Slot: scbus5 target 0 [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <ATAPI iHAS124 B AL0S> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] GEOM_LABEL[1]: MSDOSFS: ada1: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1 is diskid/XXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada1s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada3: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider ada3 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada2: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2 is diskid/XXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada4: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada4 is diskid/XXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0p1 is gpt/EFI%20system%20partition. [...] GEOM_LABEL[1]: Label for provider ada0p1 is gptid/HASH_27A-2503-A509-5BE9-BDC8EDB97487. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT32 volume has no name. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gpt/Microsoft%20reserved%20partition. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gptid/HASH_43B-1B5F-3EFF-2BB4-526051EC3175. [...] GEOM_LABEL[1]: MSDOSFS: ada0p2: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ada0p3 is gpt/Basic%20data%20partition. [...] GEOM_LABEL[1]: Label for provider ada0p3 is gptid/HASH_A7D-26FD-C10F-640D-9B298FA0FB03. [...] GEOM_LABEL[1]: MSDOSFS: ada0p3: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0p4 is gptid/HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87. [...] GEOM_LABEL[1]: MSDOSFS: ada0p4: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada3s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada3s1 is ntfs/Storage. [...] GEOM_LABEL[1]: Label for provider ada2p1 is gpt/efiboot0. [...] GEOM_LABEL[1]: Label for provider ada2p1 is gptid/HASH_242-E835-2EE3-212E-5076EE937F2A. [...] GEOM_LABEL[1]: MSDOSFS: ada2p1: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: ada2p1: FAT12/16 volume has no name. [...] GEOM_LABEL[1]: Label for provider ada2p2 is gpt/gptboot0. [...] GEOM_LABEL[1]: Label for provider ada2p2 is gptid/HASH_29B-492E-9DFD-6836-061273D6B63B. [...] GEOM_LABEL[1]: MSDOSFS: ada2p2: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ada2p3 is gpt/zfs0. [...] GEOM_LABEL[1]: Label for provider ada2p3 is gptid/HASH_FDD-E783-0355-D03D-0242457314EC. [...] GEOM_LABEL[1]: MSDOSFS: ada2p3: no FAT signature found. [...] uhub2: 8 ports with 8 removable, self powered [...] GEOM_LABEL[1]: MSDOSFS: ada4s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada4s3: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label EFI%20system%20partition(gpt/EFI%20system%20partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_27A-2503-A509-5BE9-BDC8EDB97487(gptid/HASH_27A-2503-A509-5BE9-BDC8EDB97487) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume has no name. [...] GEOM_LABEL[1]: Label Microsoft%20reserved%20partition(gpt/Microsoft%20reserved%20partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_43B-1B5F-3EFF-2BB4-526051EC3175(gptid/HASH_43B-1B5F-3EFF-2BB4-526051EC3175) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label Basic%20data%20partition(gpt/Basic%20data%20partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_A7D-26FD-C10F-640D-9B298FA0FB03(gptid/HASH_A7D-26FD-C10F-640D-9B298FA0FB03) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87(gptid/HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label Storage(ntfs/Storage) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label efiboot0(gpt/efiboot0) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_242-E835-2EE3-212E-5076EE937F2A(gptid/HASH_242-E835-2EE3-212E-5076EE937F2A) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX FAT12/16 volume has no name. [...] GEOM_LABEL[1]: Label gptboot0(gpt/gptboot0) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_29B-492E-9DFD-6836-061273D6B63B(gptid/HASH_29B-492E-9DFD-6836-061273D6B63B) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label zfs0(gpt/zfs0) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_FDD-E783-0355-D03D-0242457314EC(gptid/HASH_FDD-E783-0355-D03D-0242457314EC) already exists (diskid/XXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT32 volume not valid. [...] ugen0.2: <Kingston DataTraveler 3.0> at usbus0 [...] umass0 on uhub2 [...] umass0: <Kingston DataTraveler 3.0, class 0/0, rev 3.20/11.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc000 [...] umass0:7:0: Attached to scbus7 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <Kingston DataTraveler 3.0 1100> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 118093MB (241854636 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM_LABEL[1]: ISO9660 file system detected on da0. [...] GEOM_LABEL[1]: Label for provider da0 is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: da0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider da0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label for provider da0p1 is gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2. [...] GEOM_LABEL[1]: MSDOSFS: da0p1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider da0p2 is gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0. [...] GEOM_LABEL[1]: MSDOSFS: da0p2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0p2 is msdosfs/EFISYS. [...] GEOM_LABEL[1]: Label HASH_A6C-8A82-B15F-2118-77A70ED453A2(gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_C10-F528-E24E-32D2-F2B3F220F3C0(gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: Label HASH_A6C-8A82-B15F-2118-77A70ED453A2(gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_C10-F528-E24E-32D2-F2B3F220F3C0(gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus1 usbus2 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen1.3: <Corsair CORSAIR M55 RGB PRO Gaming Mouse> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.4: <VIA Labs, Inc. USB2.0 Hub> at usbus1 [...] uhub5 on uhub4 [...] uhub5: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/7.94, addr 4> on usbus1 [...] uhub5: MTT enabled [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] uhub5: 4 ports with 4 removable, self powered [...] ugen1.5: <Logitech USB Receiver> at usbus1 [...] ukbd1 on uhub5 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 5> on usbus1 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus1 [...] ugen1.6: <RAPOO Rapoo 2.4G Wireless Device> at usbus1 [...] ukbd2 on uhub5 [...] ukbd2: <RAPOO Rapoo 2.4G Wireless Device, class 0/0, rev 2.00/1.10, addr 6> on usbus1 [...] kbd4 at ukbd2 [...] ukbd3 on uhub5 [...] ukbd3: <RAPOO Rapoo 2.4G Wireless Device, class 0/0, rev 2.00/1.10, addr 6> on usbus1 [...] kbd5 at ukbd3 [...] ugen1.7: <Realtek ASUS USB-BT500> at usbus1 [...] GEOM_LABEL[1]: MSDOSFS: md0: no FAT signature found. [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: Label for provider md0.uzip is ufsid/XXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: MSDOSFS: md0.uzip: no FAT signature found. [...] Cuse v0.1.37 @ /dev/cuse [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf000-0xf01f mem 0xf7f10000-0xf7f100ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC580 0xE7). [...] drmn0: Trusted Memory Zone (TMZ) feature not supported [...] [drm] register mmio base: 0xF7E00000 [...] [drm] register mmio size: 262144 [...] [drm] add ip block number 0 <vi_common> [...] [drm] add ip block number 1 <gmc_v8_0> [...] [drm] add ip block number 2 <tonga_ih> [...] [drm] add ip block number 3 <gfx_v8_0> [...] [drm] add ip block number 4 <sdma_v3_0> [...] [drm] add ip block number 5 <powerplay> [...] [drm] add ip block number 6 <dm> [...] [drm] add ip block number 7 <uvd_v6_0> [...] [drm] add ip block number 8 <vce_v3_0> [...] drmn0: Fetched VBIOS from ROM BAR [...] amdgpu: ATOM BIOS: 113-58085SHD1-W90 [...] [drm] UVD is enabled in VM mode [...] [drm] UVD ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin' [...] drmn0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [...] drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [...] [drm] Detected VRAM RAM=8192M, BAR=256M [...] [drm] RAM width 256bits GDDR5 [...] [TTM] Zone kernel: Available graphics memory: 6247304 KiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 8192M of VRAM memory ready [...] [drm] amdgpu: 8192M of GTT memory ready. [...] [drm] GART: num cpu pages 65536, num gpu pages 65536 [...] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin' [...] [drm] Chained IB support enabled! [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin' [...] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin' [...] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin' [...] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin' [...] [drm] Display Core initialized with v3.2.104! [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] [drm] UVD and UVD ENC initialized successfully. [...] [drm] VCE initialized successfully. [...] drmn0: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36 [...] [drm] fb mappable at 0xE0830000 [...] [drm] vram apper at 0xE0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0xe0830000 vbase=0xfffff800e0830000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] vgapci0: child drmn0 requested pci_get_powerstate [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic5: <LinuxKPI I2C> on drm1 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drm2 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iic7: <LinuxKPI I2C> on drm3 [...] iicbus7: <Philips I2C bus> on lkpi_iic7 [...] iic7: <I2C generic I/O> on iicbus7 [...] [drm] Initialized amdgpu 3.40.0 20150101 for drmn0 on minor 0 [...] re0: link state changed to UP [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ums0 on uhub4 [...] ums0: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] ums0: 31 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub4 [...] uhid0: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] uhid1 on uhub4 [...] uhid1: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 3> on usbus1 [...] ums1 on uhub5 [...] ums1: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 5> on usbus1 [...] ums1: 16 buttons and [XYZT] coordinates ID=2 [...] uhid2 on uhub5 [...] uhid2: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 5> on usbus1 [...] ums2 on uhub5 [...] ums2: <RAPOO Rapoo 2.4G Wireless Device, class 0/0, rev 2.00/1.10, addr 6> on usbus1 [...] ums2: 5 buttons and [XYZ] coordinates ID=0 [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label gptid/HASH_A7D-26FD-C10F-640D-9B298FA0FB03 removed. [...] GEOM_LABEL[1]: Label gpt/Basic%20data%20partition removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/Storage removed. [...] GEOM_LABEL[1]: Label gptid/HASH_2DE-1EC9-DF07-ACD6-8A23945D9A87 removed. [...] ubt0 on uhub5 [...] ubt0: <Bluetooth Radio> on usbus1