[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p6 stable/23.1-n250396-d34cd428508 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1366x768 [...] CPU: AMD Ryzen Embedded V1756B with Radeon Vega Gfx (3244.12-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x810f10 Family=0x17 Model=0x11 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 32167190528 (30677 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-CPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 7 1 5 3 6 4 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x7c819000-0x7c81901e [...] smbios0: Version: 3.2, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <HPQOEM SLIC-CPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I340 82580 (Copper)> mem 0xfe580000-0xfe5fffff,0xfe60c000-0xfe60ffff at device 0.0 on pci1 [...] igb0: EEPROM V3.29-0 eTrack 0x8000027a [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> mem 0xfe500000-0xfe57ffff,0xfe608000-0xfe60bfff at device 0.1 on pci1 [...] igb1: EEPROM V3.29-0 eTrack 0x8000027a [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> mem 0xfe480000-0xfe4fffff,0xfe604000-0xfe607fff at device 0.2 on pci1 [...] igb2: EEPROM V3.29-0 eTrack 0x8000027a [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0xfe400000-0xfe47ffff,0xfe600000-0xfe603fff at device 0.3 on pci1 [...] igb3: EEPROM V3.29-0 eTrack 0x8000027a [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xfc00-0xfcff mem 0xfea18000-0xfea18fff,0xfea10000-0xfea13fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.98.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pci2: <simple comms, UART> at device 0.1 (no driver attached) [...] pci2: <simple comms, UART> at device 0.2 (no driver attached) [...] pci2: <serial bus> at device 0.3 (no driver attached) [...] ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfea14000-0xfea14fff,0xfea00000-0xfea03fff at device 0.4 on pci2 [...] ehci0: pre-2.0 USB revision (ignored) [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 1.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <network> at device 0.0 (no driver attached) [...] pcib4: <ACPI PCI-PCI bridge> at device 1.7 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] nvme0: <Generic NVMe Device> mem 0xfe800000-0xfe803fff,0xfe804000-0xfe8040ff at device 0.0 on pci4 [...] pcib5: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfe300000-0xfe37ffff at device 0.0 on pci5 [...] hdac0: <ATI (0x15de) HDA Controller> mem 0xfe3c8000-0xfe3cbfff at device 0.1 on pci5 [...] pci5: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe100000-0xfe1fffff at device 0.3 on pci5 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe000000-0xfe0fffff at device 0.4 on pci5 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pci5: <multimedia> at device 0.5 (no driver attached) [...] hdac1: <AMD Raven HDA Controller> mem 0xfe3c0000-0xfe3c7fff at device 0.6 on pci5 [...] pcib6: <ACPI PCI-PCI bridge> at device 8.2 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfe700000-0xfe7007ff at device 0.0 on pci6 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1621953340 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <(0x10ec) EHCI root HUB> at usbus0 [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub1 on usbus1 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub0: <(0x10ec) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus2 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] nvd0: <WDS500G3X0C-00SJG0> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC256 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC256 (Analog 2.0+HP/2.0)> at nid 20,33 and 25 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TEAM TM8PS7512G V1.3.0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] uhub2: 3 ports with 3 removable, self powered [...] uhub1: 8 ports with 8 removable, self powered [...] uhub0: 1 port with 1 removable, self powered [...] ugen2.2: <VIA Labs, Inc. USB2.0 Hub> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/70.63, addr 1> on usbus2 [...] uhub3: MTT enabled [...] ugen1.2: <vendor 0x8087 product 0x0029> at usbus1 [...] Root mount waiting for: usbus2 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus2 [...] ugen2.3: <VIA Labs, Inc. USB3.0 Hub> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.10/70.63, addr 2> on usbus2 [...] Root mount waiting for: usbus2 [...] Root mount waiting for: usbus2 [...] uhub4: 4 ports with 4 removable, self powered