[...] APIC: Using the MADT enumerator. [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-STABLE GENERIC amd64 [...] FreeBSD clang version 15.0.7 (https://github.com/llvm/llvm-project.git llvmorg-15.0.7-0-g8dfdcc7b7bf6) [...] PPIM 0: PA=0xd0000000, VA=0xffffffff83510000, size=0x408000, mode=0x1 [...] pmap: large map 8 PML4 slots (4096 GB) [...] VT(efifb): resolution 1366x768 [...] Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff83344000. [...] Preloaded elf obj module "/boot/kernel/uplcom.ko" at 0xffffffff8334db48. [...] Preloaded elf obj module "/boot/kernel/ucom.ko" at 0xffffffff8334e270. [...] Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff8334e9d8. [...] Preloaded boot_entropy_cache "/boot/entropy" at 0xffffffff8334f1c0. [...] Preloaded elf obj module "/boot/modules/sysctlinfo.ko" at 0xffffffff8334f218. [...] Preloaded elf obj module "/boot/kernel/ng_ubt.ko" at 0xffffffff8334f808. [...] Preloaded elf obj module "/boot/kernel/ng_hci.ko" at 0xffffffff8334feb0. [...] Preloaded elf obj module "/boot/kernel/ng_bluetooth.ko" at 0xffffffff833504d8. [...] Preloaded elf obj module "/boot/kernel/netgraph.ko" at 0xffffffff83350ac8. [...] Preloaded elf obj module "/boot/kernel/geom_eli.ko" at 0xffffffff833511f8. [...] Preloaded hostuuid "/etc/hostid" at 0xffffffff833518e8. [...] Preloaded TSLOG data "TSLOG" at 0xffffffff83351938. [...] Early TSC frequency 2394580440Hz calibrated from 8254 PIT [...] CPU: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (2394.58-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE> [...] Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr> [...] Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE> [...] Secondary Processor Controls=0x3cff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC> [...] Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV> [...] Entry Controls=0xda0400 [...] EPT Features=0x6334141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all> [...] VPID Features=0xf01<INVVPID,individual,single,all,single-globals> [...] TSC: P-state invariant, performance statistics [...] Data TLB: 2 MByte or 4 MByte pages, 4-way set associative, 32 entries and a separate array with 1 GByte pages, 4-way set associative, 4 entries [...] Data TLB: 4 KB pages, 4-way set associative, 64 entries [...] Instruction TLB: 2M/4M pages, fully associative, 8 entries [...] Instruction TLB: 4KByte pages, 8-way set associative, 64 entries [...] 64-Byte prefetching [...] Shared 2nd-Level TLB: 4 KByte/2MByte pages, 8-way associative, 1024 entries [...] L2 cache: 256 kbytes, 8-way associative, 64 bytes/line [...] real memory = 8589934592 (8192 MB) [...] Physical memory chunk(s): [...] 0x0000000000010000 - 0x0000000000057fff, 294912 bytes (72 pages) [...] 0x0000000000059000 - 0x000000000009cfff, 278528 bytes (68 pages) [...] 0x0000000000100000 - 0x000000008dffffff, 2381316096 bytes (581376 pages) [...] 0x0000000091300000 - 0x000000009d4ecfff, 203345920 bytes (49645 pages) [...] 0x000000009d4f4000 - 0x000000009dd4ffff, 8765440 bytes (2140 pages) [...] 0x000000009dfc6000 - 0x00000000ad8f8fff, 261304320 bytes (63795 pages) [...] 0x00000000adb01000 - 0x00000000ade27fff, 3305472 bytes (807 pages) [...] 0x00000000aefff000 - 0x00000000aeffffff, 4096 bytes (1 pages) [...] 0x0000000100001000 - 0x0000000220b50fff, 4843700224 bytes (1182544 pages) [...] 0x000000022f000000 - 0x000000022f0abfff, 704512 bytes (172 pages) [...] avail memory = 7675146240 (7319 MB) [...] intel stolen mem: base 0xafe00000 size 512 MB [...] MADT: Found CPU APIC ID 0 ACPI ID 1: enabled [...] SMP: Added CPU 0 (AP) [...] MADT: Found CPU APIC ID 2 ACPI ID 2: enabled [...] SMP: Added CPU 2 (AP) [...] MADT: Found CPU APIC ID 1 ACPI ID 3: enabled [...] SMP: Added CPU 1 (AP) [...] MADT: Found CPU APIC ID 3 ACPI ID 4: enabled [...] SMP: Added CPU 3 (AP) [...] Event timer "LAPIC" quality 600 [...] LAPIC: ipi_wait() us multiplier 29 (r 8100138 tsc 2394580440) [...] ACPI APIC Table: <_ASUS_ Notebook> [...] Package ID shift: 4 [...] L3 cache ID shift: 4 [...] L2 cache ID shift: 1 [...] L1 cache ID shift: 1 [...] Core ID shift: 1 [...] AP boot address 0x59000 [...] INTR: Adding local APIC 2 as a target [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] Package HW ID = 0 [...] Core HW ID = 0 [...] CPU0 (BSP): APIC ID: 0 [...] CPU1 (AP/HT): APIC ID: 1 [...] Core HW ID = 1 [...] CPU2 (AP): APIC ID: 2 [...] CPU3 (AP/HT): APIC ID: 3 [...] APIC: CPU 0 has ACPI ID 1 [...] APIC: CPU 1 has ACPI ID 3 [...] APIC: CPU 2 has ACPI ID 2 [...] APIC: CPU 3 has ACPI ID 4 [...] x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000 [...] x86bios: SSEG 0x09c000-0x09cfff at 0xfffffe000fd0b000 [...] x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000 [...] Pentium Pro MTRR support enabled [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: read 4096 bytes from preloaded cache [...] random: no platform bootloader entropy [...] random: unblocking device. [...] VIMAGE (virtualized network stack) enabled [...] hostuuid: using HASH_FBB-57CC-F0AE-6CDC-7DD609D2FAC3 [...] ULE: setup cpu 0 [...] ULE: setup cpu 1 [...] ULE: setup cpu 2 [...] ULE: setup cpu 3 [...] ACPI: RSDP 0x00000000ADEAC000 000024 (v02 _ASUS_) [...] ACPI: XSDT 0x00000000ADEAC098 0000B4 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [...] ACPI: FACP 0x00000000ADEC2430 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013) [...] ACPI: DSDT 0x00000000ADEAC270 0161BD (v02 _ASUS_ Notebook 00000012 INTL 20120711) [...] ACPI: FACS 0x00000000AEB33080 000040 [...] ACPI: APIC 0x00000000ADEC2540 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013) [...] ACPI: FPDT 0x00000000ADEC25B8 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [...] ACPI: ECDT 0x00000000ADEC2600 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [...] ACPI: LPIT 0x00000000ADEC26C8 00005C (v01 _ASUS_ Notebook 00000000 AMI. 00000005) [...] ACPI: SSDT 0x00000000ADEC2728 000174 (v01 Intel zpoddult 00001000 INTL 20120711) [...] ACPI: SSDT 0x00000000ADEC28A0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [...] ACPI: SSDT 0x00000000ADEC2DE0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [...] ACPI: SSDT 0x00000000ADEC38B8 0002DE (v01 PmRef Cpu0Tst 00003000 INTL 20120711) [...] ACPI: SSDT 0x00000000ADEC3B98 000348 (v01 PmRef ApTst 00003000 INTL 20120711) [...] ACPI: MCFG 0x00000000ADEC3EE0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097) [...] ACPI: SSDT 0x00000000ADEC3F20 003072 (v01 DptfTa DptfTabl 00001000 INTL 20120711) [...] ACPI: HPET 0x00000000ADEC6F98 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [...] ACPI: SSDT 0x00000000ADEC6FD0 000298 (v01 SataRe SataTabl 00001000 INTL 20120711) [...] ACPI: SSDT 0x00000000ADEC7268 003EDA (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [...] ACPI: SSDT 0x00000000ADECB148 000C43 (v01 SgRef SgPch 00001000 INTL 20120711) [...] ACPI: BGRT 0x00000000ADECBD90 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013) [...] ACPI: SSDT 0x00000000ADECBDC8 001493 (v01 OptRef OptTabl 00001000 INTL 20120711) [...] MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 [...] ioapic0: ver 0x20 maxredir 0x27 [...] ioapic0: Routing external 8259A's -> intpin 0 [...] MADT: Interrupt override: source 0, irq 2 [...] ioapic0: Routing IRQ 0 -> intpin 2 [...] MADT: Interrupt override: source 9, irq 9 [...] ioapic0: intpin 9 trigger: level [...] lapic: Routing NMI -> LINT1 [...] lapic: LINT1 trigger: edge [...] lapic: LINT1 polarity: high [...] ioapic0 <Version 2.0> irqs 0-39 [...] cpu0 BSP: [...] ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] cmci: 0x000000f2 [...] SMP: AP CPU #1 Launched! [...] cpu1 AP: [...] ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] cmci: 0x000100f2 [...] SMP: AP CPU #3 Launched! [...] cpu3 AP: [...] ID: 0x03000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] cmci: 0x000000f2 [...] SMP: AP CPU #2 Launched! [...] cpu2 AP: [...] ID: 0x02000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] cmci: 0x000100f2 [...] SMP: passed TSC synchronization test [...] TSC timecounter discards lower 1 bit(s) [...] KTLS: Initialized 4 threads [...] wlan: <802.11 Link Layer> [...] random: entropy device external interface [...] firmware: 'iwm3160fw' version 0: 918268 bytes loaded at 0xffffffff8182a968 [...] snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] [...] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 [...] firmware: 'iwm3168fw' version 0: 1028032 bytes loaded at 0xffffffff8190ac64 [...] firmware: 'iwm7260fw' version 0: 1049340 bytes loaded at 0xffffffff81a05c24 [...] firmware: 'iwm7265fw' version 0: 1180412 bytes loaded at 0xffffffff81b05f20 [...] firmware: 'iwm7265Dfw' version 0: 1383604 bytes loaded at 0xffffffff81c2621c [...] firmware: 'iwm8000Cfw' version 0: 2351636 bytes loaded at 0xffffffff81d77ed0 [...] firmware: 'iwm8265fw' version 0: 1811984 bytes loaded at 0xffffffff81fb60e4 [...] EFI Runtime entry 47 mapping attributes unsupported [...] tcp_log: tcp_log device [...] crypto: <crypto core> [...] io: <I/O> [...] kbd: new array size 4 [...] kbd1 at kbdmux0 [...] mem: <memory> [...] null: <full device, null device, zero device> [...] [ath_hal] loaded [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xaef56298-0xaef562b6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] crypto: assign cryptosoft0 driver id 0, flags 0x6000000 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] crypto: assign aesni0 driver id 1, flags 0xe000000 [...] acpi0: <_ASUS_ Notebook> [...] ACPI: 11 ACPI AML tables successfully acquired and loaded [...] PCIe: Memory Mapped configuration base @ 0xf8000000 [...] ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 [...] acpi_ec0: <Embedded Controller: GPE 0xa, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] acpi0: wakeup code va 0xfffffe000fced000 pa 0x59000 [...] cpu0: <ACPI CPU> on acpi0 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFF80001C40800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [...] cpu2: <ACPI CPU> on acpi0 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFF80001B58800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFF800019DE900 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [...] cpu1: <ACPI CPU> on acpi0 [...] cpu3: <ACPI CPU> on acpi0 [...] ACPI: Processor \134_PR_.CPU4 (ACPI ID 5) ignored [...] ACPI: Processor \134_PR_.CPU5 (ACPI ID 6) ignored [...] ACPI: Processor \134_PR_.CPU6 (ACPI ID 7) ignored [...] ACPI: Processor \134_PR_.CPU7 (ACPI ID 8) ignored [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route [...] hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic [...] hpet0: t1: irqs 0x00f00000 (0), MSI [...] hpet0: t2: irqs 0x00f00800 (0), MSI [...] hpet0: t3: irqs 0x00f01000 (0), MSI [...] hpet0: t4: irqs 0x00000000 (0), MSI [...] hpet0: t5: irqs 0x00000000 (0), MSI [...] hpet0: t6: irqs 0x00000000 (0), MSI [...] hpet0: t7: irqs 0x00000000 (0), MSI [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] msi: routing MSI-X IRQ 40 to local APIC 2 vector 48 [...] msi: routing MSI-X IRQ 41 to local APIC 0 vector 49 [...] msi: routing MSI-X IRQ 42 to local APIC 2 vector 49 [...] msi: routing MSI-X IRQ 43 to local APIC 0 vector 50 [...] msi: routing MSI-X IRQ 44 to local APIC 2 vector 50 [...] msi: routing MSI-X IRQ 45 to local APIC 0 vector 51 [...] msi: routing MSI-X IRQ 46 to local APIC 2 vector 51 [...] msi: routing MSI-X IRQ 47 to local APIC 0 vector 52 [...] msi: Assigning MSI-X IRQ 40 to local APIC 0 vector 53 [...] msi: Assigning MSI-X IRQ 41 to local APIC 1 vector 48 [...] msi: Assigning MSI-X IRQ 43 to local APIC 3 vector 48 [...] msi: Assigning MSI-X IRQ 44 to local APIC 0 vector 49 [...] msi: Assigning MSI-X IRQ 46 to local APIC 0 vector 50 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 2 vector 48 [...] ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 54 [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 55 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] ACPI timer: -> 10 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pci_link0: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 [...] Validation 0 255 N 0 3 4 5 6 7 10 11 12 [...] After Disable 0 255 N 0 3 4 5 6 7 10 11 12 [...] pci_link1: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 7 10 12 [...] Validation 0 255 N 0 3 4 5 6 7 10 12 [...] After Disable 0 255 N 0 3 4 5 6 7 10 12 [...] pci_link2: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 7 10 12 [...] Validation 0 255 N 0 3 4 5 6 7 10 12 [...] After Disable 0 255 N 0 3 4 5 6 7 10 12 [...] pci_link3: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 7 10 12 [...] Validation 0 255 N 0 3 4 5 6 7 10 12 [...] After Disable 0 255 N 0 3 4 5 6 7 10 12 [...] pci_link4: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 7 10 12 [...] Validation 0 255 N 0 3 4 5 6 7 10 12 [...] After Disable 0 255 N 0 3 4 5 6 7 10 12 [...] pci_link5: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 7 10 12 [...] Validation 0 255 N 0 3 4 5 6 7 10 12 [...] After Disable 0 255 N 0 3 4 5 6 7 10 12 [...] pci_link6: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 7 10 12 [...] Validation 0 255 N 0 3 4 5 6 7 10 12 [...] After Disable 0 255 N 0 3 4 5 6 7 10 12 [...] pci_link7: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 7 10 12 [...] Validation 0 255 N 0 3 4 5 6 7 10 12 [...] After Disable 0 255 N 0 3 4 5 6 7 10 12 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: decoding 5 range 0-0x3e [...] pcib0: decoding 4 range 0-0xcf7 [...] pcib0: decoding 4 range 0xd00-0xffff [...] pcib0: decoding 3 range 0xa0000-0xbffff [...] pcib0: decoding 3 range 0xc0000-0xc3fff [...] pcib0: decoding 3 range 0xc4000-0xc7fff [...] pcib0: decoding 3 range 0xc8000-0xcbfff [...] pcib0: decoding 3 range 0xcc000-0xcffff [...] pcib0: decoding 3 range 0xd0000-0xd3fff [...] pcib0: decoding 3 range 0xd4000-0xd7fff [...] pcib0: decoding 3 range 0xd8000-0xdbfff [...] pcib0: decoding 3 range 0xdc000-0xdffff [...] pcib0: decoding 3 range 0xe0000-0xe3fff [...] pcib0: decoding 3 range 0xe4000-0xe7fff [...] pcib0: decoding 3 range 0xe8000-0xebfff [...] pcib0: decoding 3 range 0xec000-0xeffff [...] pcib0: decoding 3 range 0xcfe00000-0xfeafffff [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: domain=0, physical bus=0 [...] found-> vendor=0x8086, dev=0x0a04, revid=0x0b [...] domain=0, bus=0, slot=0, func=0 [...] class=06-00-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] found-> vendor=0x8086, dev=0x0a16, revid=0x0b [...] domain=0, bus=0, slot=2, func=0 [...] class=03-00-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 2 supports D0 D3 current D0 [...] MSI supports 1 message [...] map[10]: type Memory, range 64, base 0xf7400000, size 22, enabled [...] pcib0: allocated type 3 (0xf7400000-0xf77fffff) for rid 10 of pci0:0:2:0 [...] map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled [...] pcib0: allocated type 3 (0xd0000000-0xdfffffff) for rid 18 of pci0:0:2:0 [...] map[20]: type I/O Port, range 32, base 0xf000, size 6, enabled [...] pcib0: allocated type 4 (0xf000-0xf03f) for rid 20 of pci0:0:2:0 [...] found-> vendor=0x8086, dev=0x0a0c, revid=0x0b [...] domain=0, bus=0, slot=3, func=0 [...] class=04-03-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 2 supports D0 D3 current D0 [...] MSI supports 1 message [...] map[10]: type Memory, range 64, base 0xf7a1c000, size 14, enabled [...] pcib0: allocated type 3 (0xf7a1c000-0xf7a1ffff) for rid 10 of pci0:0:3:0 [...] found-> vendor=0x8086, dev=0x0a03, revid=0x0b [...] domain=0, bus=0, slot=4, func=0 [...] class=11-80-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] map[10]: type Memory, range 64, base 0xf7a10000, size 15, enabled [...] pcib0: allocated type 3 (0xf7a10000-0xf7a17fff) for rid 10 of pci0:0:4:0 [...] found-> vendor=0x8086, dev=0x9c31, revid=0x04 [...] domain=0, bus=0, slot=20, func=0 [...] class=0c-03-30, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 2 supports D0 D3 current D0 [...] MSI supports 8 messages, 64 bit [...] map[10]: type Memory, range 64, base 0xf7a00000, size 16, enabled [...] pcib0: allocated type 3 (0xf7a00000-0xf7a0ffff) for rid 10 of pci0:0:20:0 [...] found-> vendor=0x8086, dev=0x9c3a, revid=0x04 [...] domain=0, bus=0, slot=22, func=0 [...] class=07-80-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] map[10]: type Memory, range 64, base 0xf7a25000, size 5, enabled [...] pcib0: allocated type 3 (0xf7a25000-0xf7a2501f) for rid 10 of pci0:0:22:0 [...] found-> vendor=0x8086, dev=0x9c20, revid=0x04 [...] domain=0, bus=0, slot=27, func=0 [...] class=04-03-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] map[10]: type Memory, range 64, base 0xf7a18000, size 14, enabled [...] pcib0: allocated type 3 (0xf7a18000-0xf7a1bfff) for rid 10 of pci0:0:27:0 [...] found-> vendor=0x8086, dev=0x9c10, revid=0xe4 [...] domain=0, bus=0, slot=28, func=0 [...] class=06-04-00, hdrtype=0x01, mfdev=1 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] secbus=1, subbus=1 [...] found-> vendor=0x8086, dev=0x9c14, revid=0xe4 [...] domain=0, bus=0, slot=28, func=2 [...] class=06-04-00, hdrtype=0x01, mfdev=1 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=c, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] secbus=2, subbus=2 [...] found-> vendor=0x8086, dev=0x9c16, revid=0xe4 [...] domain=0, bus=0, slot=28, func=3 [...] class=06-04-00, hdrtype=0x01, mfdev=1 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=d, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] secbus=3, subbus=3 [...] found-> vendor=0x8086, dev=0x9c18, revid=0xe4 [...] domain=0, bus=0, slot=28, func=4 [...] class=06-04-00, hdrtype=0x01, mfdev=1 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] secbus=4, subbus=4 [...] found-> vendor=0x8086, dev=0x9c26, revid=0x04 [...] domain=0, bus=0, slot=29, func=0 [...] class=0c-03-20, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] map[10]: type Memory, range 32, base 0xf7a23000, size 10, enabled [...] pcib0: allocated type 3 (0xf7a23000-0xf7a233ff) for rid 10 of pci0:0:29:0 [...] found-> vendor=0x8086, dev=0x9c43, revid=0x04 [...] domain=0, bus=0, slot=31, func=0 [...] class=06-01-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] found-> vendor=0x8086, dev=0x9c03, revid=0x04 [...] domain=0, bus=0, slot=31, func=2 [...] class=01-06-01, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=b, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] map[10]: type I/O Port, range 32, base 0xf0b0, size 3, enabled [...] pcib0: allocated type 4 (0xf0b0-0xf0b7) for rid 10 of pci0:0:31:2 [...] map[14]: type I/O Port, range 32, base 0xf0a0, size 2, enabled [...] pcib0: allocated type 4 (0xf0a0-0xf0a3) for rid 14 of pci0:0:31:2 [...] map[18]: type I/O Port, range 32, base 0xf090, size 3, enabled [...] pcib0: allocated type 4 (0xf090-0xf097) for rid 18 of pci0:0:31:2 [...] map[1c]: type I/O Port, range 32, base 0xf080, size 2, enabled [...] pcib0: allocated type 4 (0xf080-0xf083) for rid 1c of pci0:0:31:2 [...] map[20]: type I/O Port, range 32, base 0xf060, size 5, enabled [...] pcib0: allocated type 4 (0xf060-0xf07f) for rid 20 of pci0:0:31:2 [...] map[24]: type Memory, range 32, base 0xf7a22000, size 11, enabled [...] pcib0: allocated type 3 (0xf7a22000-0xf7a227ff) for rid 24 of pci0:0:31:2 [...] found-> vendor=0x8086, dev=0x9c22, revid=0x04 [...] domain=0, bus=0, slot=31, func=3 [...] class=0c-05-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=c, irq=255 [...] map[10]: type Memory, range 64, base 0xf7a21000, size 8, enabled [...] pcib0: allocated type 3 (0xf7a21000-0xf7a210ff) for rid 10 of pci0:0:31:3 [...] map[20]: type I/O Port, range 32, base 0xf040, size 5, enabled [...] pcib0: allocated type 4 (0xf040-0xf05f) for rid 20 of pci0:0:31:3 [...] found-> vendor=0x8086, dev=0x9c24, revid=0x04 [...] domain=0, bus=0, slot=31, func=6 [...] class=11-80-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=c, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] map[10]: type Memory, range 64, base 0xf7a20000, size 12, enabled [...] pcib0: allocated type 3 (0xf7a20000-0xf7a20fff) for rid 10 of pci0:0:31:6 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xd0000000-0xdfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7a1c000-0xf7a1ffff at device 3.0 on pci0 [...] hdac0: PCI card vendor: 0x1043, device: 0x16cd [...] hdac0: HDA Driver Revision: 20120126_0002 [...] hdac0: Config options: on=0x00000000 off=0x00000000 [...] hdac0: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 48 to local APIC 2 vector 48 [...] hdac0: using IRQ 48 for MSI [...] hdac0: Caps: OSS 2, ISS 0, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 [...] pci0: <dasp> at device 4.0 (no driver attached) [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7a00000-0xf7a0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: attempting to allocate 1 MSI vectors (8 supported) [...] msi: routing MSI IRQ 49 to local APIC 0 vector 56 [...] xhci0: using IRQ 49 for MSI [...] xhci0: MSI enabled [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] xhci0: usbpf: Attached [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf7a18000-0xf7a1bfff at device 27.0 on pci0 [...] hdac1: PCI card vendor: 0x1043, device: 0x16cd [...] hdac1: HDA Driver Revision: 20120126_0002 [...] hdac1: Config options: on=0x00000000 off=0x00000000 [...] hdac1: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 50 to local APIC 2 vector 50 [...] hdac1: using IRQ 50 for MSI [...] hdac1: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pcib1: domain 0 [...] pcib1: secondary bus 1 [...] pcib1: subordinate bus 1 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib1: allocated bus range (1-1) for rid 0 of pci1 [...] pci1: domain=0, physical bus=1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib2 [...] pcib0: allocated type 3 (0xf7900000-0xf79fffff) for rid 20 of pcib2 [...] pcib2: domain 0 [...] pcib2: secondary bus 2 [...] pcib2: subordinate bus 2 [...] pcib2: I/O decode 0xe000-0xefff [...] pcib2: memory decode 0xf7900000-0xf79fffff [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib2: allocated bus range (2-2) for rid 0 of pci2 [...] pci2: domain=0, physical bus=2 [...] found-> vendor=0x10ec, dev=0x8168, revid=0x10 [...] domain=0, bus=2, slot=0, func=0 [...] class=02-00-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D1 D2 D3 current D0 [...] MSI supports 1 message, 64 bit [...] MSI-X supports 4 messages in map 0x20 [...] map[10]: type I/O Port, range 32, base 0xe000, size 8, enabled [...] pcib2: allocated I/O port range (0xe000-0xe0ff) for rid 10 of pci0:2:0:0 [...] map[18]: type Memory, range 64, base 0xf7904000, size 12, enabled [...] pcib2: allocated memory range (0xf7904000-0xf7904fff) for rid 18 of pci0:2:0:0 [...] map[20]: type Memory, range 64, base 0xf7900000, size 14, enabled [...] pcib2: allocated memory range (0xf7900000-0xf7903fff) for rid 20 of pci0:2:0:0 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7904000-0xf7904fff,0xf7900000-0xf7903fff at device 0.0 on pci2 [...] re0: MSI count : 1 [...] re0: MSI-X count : 4 [...] re0: attempting to allocate 1 MSI-X vectors (4 supported) [...] msi: routing MSI-X IRQ 51 to local APIC 0 vector 57 [...] re0: using IRQ 51 for MSI-X [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x50800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: OUI 0x00e04c, model 0x0000, rev. 0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: bpf attached [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pcib0: allocated type 3 (0xf7800000-0xf78fffff) for rid 20 of pcib3 [...] pcib3: domain 0 [...] pcib3: secondary bus 3 [...] pcib3: subordinate bus 3 [...] pcib3: memory decode 0xf7800000-0xf78fffff [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib3: allocated bus range (3-3) for rid 0 of pci3 [...] pci3: domain=0, physical bus=3 [...] found-> vendor=0x168c, dev=0x0036, revid=0x01 [...] domain=0, bus=3, slot=0, func=0 [...] class=02-80-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 2 supports D0 D1 D2 D3 current D0 [...] MSI supports 4 messages, 64 bit, vector masks [...] map[10]: type Memory, range 64, base 0xf7800000, size 19, enabled [...] pcib3: allocated memory range (0xf7800000-0xf787ffff) for rid 10 of pci0:3:0:0 [...] ath0: <Qualcomm Atheros AR9565> mem 0xf7800000-0xf787ffff at device 0.0 on pci3 [...] pcib3: matched entry for 3.0.INTA [...] pcib3: slot 0 INTA hardwired to IRQ 19 [...] ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 2 vector 51 [...] ath0: WB335 1-ANT card detected [...] ath0: Bluetooth Antenna Diversity card detected [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: RX status length: 48 [...] ath0: RX buffer size: 4096 [...] ath0: TX descriptor length: 128 [...] ath0: TX status length: 36 [...] ath0: TX buffers per descriptor: 4 [...] ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries [...] ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries [...] ath0: RX timestamp: 32 bits [...] ath0: TX timestamp: 32 bits [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [...] ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [...] ath0: 1T1R [...] ath0: 11ng MCS 20MHz [...] ath0: MCS 0-7: 6.5Mbps - 65Mbps [...] ath0: 11ng MCS 20MHz SGI [...] ath0: MCS 0-7: 7Mbps - 72Mbps [...] ath0: 11ng MCS 40MHz: [...] ath0: MCS 0-7: 13.5Mbps - 135Mbps [...] ath0: 11ng MCS 40MHz SGI: [...] ath0: MCS 0-7: 15Mbps - 150Mbps [...] ath0: QCA9565 mac 704.1 RF5110 phy 0.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] ath0: Use hw queue 1 for WME_AC_BE traffic [...] ath0: Use hw queue 0 for WME_AC_BK traffic [...] ath0: Use hw queue 2 for WME_AC_VI traffic [...] ath0: Use hw queue 3 for WME_AC_VO traffic [...] ath0: Use hw queue 8 for CAB traffic [...] ath0: Use hw queue 9 for beacons [...] ath0: using multicast key search [...] pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib4 [...] pcib0: allocated type 3 (0xf6000000-0xf70fffff) for rid 20 of pcib4 [...] pcib0: allocated type 3 (0xe0000000-0xf1ffffff) for rid 24 of pcib4 [...] pcib4: domain 0 [...] pcib4: secondary bus 4 [...] pcib4: subordinate bus 4 [...] pcib4: I/O decode 0xd000-0xdfff [...] pcib4: memory decode 0xf6000000-0xf70fffff [...] pcib4: prefetched decode 0xe0000000-0xf1ffffff [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib4: allocated bus range (4-4) for rid 0 of pci4 [...] pci4: domain=0, physical bus=4 [...] found-> vendor=0x10de, dev=0x1140, revid=0xa1 [...] domain=0, bus=4, slot=0, func=0 [...] class=03-02-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] map[10]: type Memory, range 32, base 0xf6000000, size 24, enabled [...] pcib4: allocated memory range (0xf6000000-0xf6ffffff) for rid 10 of pci0:4:0:0 [...] map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled [...] pcib4: allocated prefetch range (0xe0000000-0xefffffff) for rid 14 of pci0:4:0:0 [...] map[1c]: type Prefetchable Memory, range 64, base 0xf0000000, size 25, enabled [...] pcib4: allocated prefetch range (0xf0000000-0xf1ffffff) for rid 1c of pci0:4:0:0 [...] map[24]: type I/O Port, range 32, base 0xd000, size 7, enabled [...] pcib4: allocated I/O port range (0xd000-0xd07f) for rid 24 of pci0:4:0:0 [...] vgapci1: <VGA-compatible display> port 0xd000-0xd07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff at device 0.0 on pci4 [...] ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xf7a23000-0xf7a233ff at device 29.0 on pci0 [...] pcib0: matched entry for 0.29.INTA [...] pcib0: slot 29 INTA hardwired to IRQ 23 [...] ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 58 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] ehci0: usbpf: Attached [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7a22000-0xf7a227ff at device 31.2 on pci0 [...] ahci0: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 52 to local APIC 2 vector 52 [...] ahci0: using IRQ 52 for MSI [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahci0: Caps: 64bit NCQ SS AL CLO 6Gbps PMD SSC PSC 32cmd 4ports [...] ahci0: Caps2: DESO SADM SDS APST [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich0: Caps: [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich1: Caps: [...] ahcich2: not probed (disabled) [...] ahcich3: not probed (disabled) [...] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) [...] pci0: <dasp> at device 31.6 (no driver attached) [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] AcpiOsExecute: task queue not started [...] battery0: <ACPI Control Method Battery> on acpi0 [...] AcpiOsExecute: task queue not started [...] psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] atkbd: the current kbd controller command byte 0065 [...] atkbd: keyboard ID 0x41ab (2) [...] kbdc: RESET_KBD return code:00fa [...] kbdc: RESET_KBD status:00aa [...] kbd0 at atkbd0 [...] kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 [...] ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59 [...] atkbd0: [GIANT-LOCKED] [...] psm0: current command byte:0065 [...] kbdc: TEST_AUX_PORT status:0000 [...] kbdc: RESET_AUX return code:00fe [...] kbdc: RESET_AUX return code:00fe [...] kbdc: RESET_AUX return code:00fe [...] kbdc: DIAGNOSE status:0055 [...] kbdc: TEST_KBD_PORT status:0000 [...] psm0: failed to reset the aux device. [...] ACPI: Enabled 5 GPEs in block 00 to 7F [...] ahc_isa_identify 0: ioport 0xc00 alloc failed [...] ahc_isa_identify 1: ioport 0x1c00 alloc failed [...] ahc_isa_identify 2: ioport 0x2c00 alloc failed [...] ahc_isa_identify 3: ioport 0x3c00 alloc failed [...] ahc_isa_identify 4: ioport 0x4c00 alloc failed [...] ahc_isa_identify 5: ioport 0x5c00 alloc failed [...] ahc_isa_identify 6: ioport 0x6c00 alloc failed [...] ahc_isa_identify 7: ioport 0x7c00 alloc failed [...] ahc_isa_identify 8: ioport 0x8c00 alloc failed [...] ahc_isa_identify 9: ioport 0x9c00 alloc failed [...] ahc_isa_identify 10: ioport 0xac00 alloc failed [...] ahc_isa_identify 11: ioport 0xbc00 alloc failed [...] ahc_isa_identify 12: ioport 0xcc00 alloc failed [...] ahc_isa_identify 13: ioport 0xdc00 alloc failed [...] ahc_isa_identify 14: ioport 0xec00 alloc failed [...] pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc0800-0xc0fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc1000-0xc17ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc1800-0xc1fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc2000-0xc27ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc2800-0xc2fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc3000-0xc37ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc3800-0xc3fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc4000-0xc47ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc4800-0xc4fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc5000-0xc57ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc5800-0xc5fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc6000-0xc67ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc6800-0xc6fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc7000-0xc77ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc7800-0xc7fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc8000-0xc87ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc8800-0xc8fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc9000-0xc97ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc9800-0xc9fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xca000-0xca7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xca800-0xcafff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xcb000-0xcb7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xcb800-0xcbfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xcc000-0xcc7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xcc800-0xccfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xcd000-0xcd7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xcd800-0xcdfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xce000-0xce7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xce800-0xcefff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xcf000-0xcf7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xcf800-0xcffff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xda000-0xda7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xda800-0xdafff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xdd800-0xddfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xde000-0xde7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xde800-0xdefff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xdf800-0xdffff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe0000-0xe07ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe0800-0xe0fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe1000-0xe17ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe1800-0xe1fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe2000-0xe27ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe2800-0xe2fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe3000-0xe37ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe3800-0xe3fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe4000-0xe47ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe4800-0xe4fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe5000-0xe57ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe5800-0xe5fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe6000-0xe67ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe6800-0xe6fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe7000-0xe77ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe7800-0xe7fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe8000-0xe87ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe8800-0xe8fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe9000-0xe97ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xe9800-0xe9fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xea000-0xea7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xea800-0xeafff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xeb000-0xeb7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xeb800-0xebfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xec000-0xec7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xec800-0xecfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xed000-0xed7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xed800-0xedfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xee000-0xee7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xee800-0xeefff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xef000-0xef7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xef800-0xeffff) for rid 0 of orm0 [...] isa_probe_children: disabling PnP devices [...] atkbdc: atkbdc0 already exists; skipping it [...] atrtc: atrtc0 already exists; skipping it [...] attimer: attimer0 already exists; skipping it [...] sc: sc0 already exists; skipping it [...] isa_probe_children: probing non-PnP devices [...] sc0 failed to probe on isa0 [...] vga0 failed to probe on isa0 [...] pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 [...] pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 [...] fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 [...] ppc0: cannot reserve I/O port range [...] ppc0 failed to probe at irq 7 on isa0 [...] pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0 [...] uart0 failed to probe at port 0x3f8 irq 4 on isa0 [...] pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1 [...] uart1 failed to probe at port 0x2f8 irq 3 on isa0 [...] isa_probe_children: probing PnP devices [...] AcpiOsExecute: task queue not started [...] AcpiOsExecute: task queue not started [...] AcpiOsExecute: task queue not started [...] AcpiOsExecute: task queue not started [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est1: <Enhanced SpeedStep Frequency Control> on cpu1 [...] est2: <Enhanced SpeedStep Frequency Control> on cpu2 [...] est3: <Enhanced SpeedStep Frequency Control> on cpu3 [...] Device configuration finished. [...] procfs registered [...] Statistical TSC calibration took 10732 us and 17121 data points [...] Timecounter "TSC-low" frequency 1197228397 Hz quality 1000 [...] Statistical lapic calibration took 3209 us and 15247 data points [...] lapic: Divisor 2, Frequency 49884516 Hz [...] lapic: deadline tsc mode, Frequency 2394456794 Hz [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] vlan: initialized, using hash tables with chaining [...] lo0: bpf attached [...] tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536 [...] IPsec: Initialized Security Association Processing. [...] AcpiOsExecute: enqueue 6 pending tasks [...] acpi_acad0: acline initialization start [...] acpi_acad0: On Line [...] acpi_acad0: acline initialization done, tried 1 times [...] battery0: battery enitialization start [...] ahcich0: AHCI reset... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ahcich0: SATA connect time=100us status=00000133 [...] ahcich0: AHCI reset: device found [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: Subsystem ID: 0x80860101 [...] ahcich1: AHCI reset... [...] hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 [...] hdaa0: Original pins configuration: [...] hdaa0: nid 0x as seq device conn jack loc color misc [...] hdaa0: 3 58560010 1 0 Digital-out None Digital 0x18 Unknown 0 [...] hdaa0: Patched pins configuration: [...] hdaa0: nid 0x as seq device conn jack loc color misc [...] hdaa0: 3 58560010 1 0 Digital-out None Digital 0x18 Unknown 0 DISA [...] hdaa0: Tracing input monitor [...] hdaa0: Tracing other input monitors [...] hdaa0: Tracing beeper [...] hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref [...] ahcich1: SATA connect time=1000us status=00000123 [...] ahcich1: AHCI reset: device found [...] hdacc1: <Realtek ALC233 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC233 Audio Function Group> at nid 1 on hdacc1 [...] hdaa1: Subsystem ID: 0x104316cd [...] hdaa1: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1 [...] hdaa1: GPIO0: disabled [...] hdaa1: GPIO1: disabled [...] hdaa1: GPIO2: disabled [...] hdaa1: Original pins configuration: [...] hdaa1: nid 0x as seq device conn jack loc color misc [...] hdaa1: 18 40000000 0 0 Line-out None Unknown 0x00 Unknown 0 [...] hdaa1: 20 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 [...] hdaa1: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1 [...] hdaa1: 24 411111f0 15 0 Speaker None 1/8 Rear Black 1 [...] hdaa1: 25 411111f0 15 0 Speaker None 1/8 Rear Black 1 [...] hdaa1: 26 411111f0 15 0 Speaker None 1/8 Rear Black 1 [...] hdaa1: 27 90a70130 3 0 Mic Fixed Analog Internal Unknown 1 [...] hdaa1: 29 40469b05 0 5 SPDIF-out None Digital 0x00 Pink 11 [...] hdaa1: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 [...] hdaa1: 33 04211020 2 0 Headphones Jack 1/8 Right Black 0 [...] hdaa1: Patching widget caps nid=29 0x00400400 -> 0x00700400 [...] hdaa1: Patched pins configuration: [...] hdaa1: nid 0x as seq device conn jack loc color misc [...] hdaa1: 18 40000000 0 0 Line-out None Unknown 0x00 Unknown 0 DISA [...] hdaa1: 20 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 [...] hdaa1: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA [...] hdaa1: 24 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA [...] hdaa1: 25 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA [...] hdaa1: 26 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA [...] hdaa1: 27 90a70130 3 0 Mic Fixed Analog Internal Unknown 1 [...] hdaa1: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA [...] hdaa1: 33 04211020 2 0 Headphones Jack 1/8 Right Black 0 [...] hdaa1: 3 associations found: [...] hdaa1: Association 0 (1) out: [...] hdaa1: Pin nid=20 seq=0 [...] hdaa1: Association 1 (2) out: [...] hdaa1: Pin nid=33 seq=0 [...] hdaa1: Association 2 (3) in: [...] hdaa1: Pin nid=27 seq=0 [...] hdaa1: Tracing association 0 (1) [...] hdaa1: Pin 20 traced to DAC 2 [...] hdaa1: Association 0 (1) trace succeeded [...] hdaa1: Tracing association 1 (2) [...] hdaa1: Pin 33 traced to DAC 3 [...] hdaa1: Association 1 (2) trace succeeded [...] hdaa1: Tracing association 2 (3) [...] hdaa1: Pin 27 traced to ADC 8 [...] hdaa1: Association 2 (3) trace succeeded [...] hdaa1: Looking for additional DAC for association 0 (1) [...] hdaa1: Looking for additional DAC for association 1 (2) [...] hdaa1: Looking for additional ADC for association 2 (3) [...] hdaa1: ADC 9 considered equal to ADC 8 [...] hdaa1: Tracing input monitor [...] hdaa1: Tracing nid 11 to out [...] hdaa1: nid 11 is input monitor [...] hdaa1: Tracing nid 34 to out [...] hdaa1: Tracing nid 35 to out [...] hdaa1: Tracing other input monitors [...] hdaa1: Tracing nid 27 to out [...] hdaa1: Tracing beeper [...] hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref [...] pcm0: <Realtek ALC233 (Internal Analog)> at nid 20 and 27 on hdaa1 [...] pcm0: Playback: [...] pcm0: Stream cap: 0x00000001 PCM [...] pcm0: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz [...] pcm0: DAC: 2 [...] pcm0: [...] pcm0: nid=20 [pin: Speaker (Fixed)] [...] pcm0: + <- nid=12 [audio mixer] [src: pcm, mix] [...] pcm0: + <- nid=2 [audio output] [src: pcm] [...] pcm0: + <- nid=11 [audio mixer] [src: mix] [...] pcm0: [...] pcm0: Record: [...] pcm0: Stream cap: 0x00000001 PCM [...] pcm0: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz [...] pcm0: ADC: 8 [...] pcm0: ADC: 9 [...] pcm0: [...] pcm0: nid=8 [audio input] [...] pcm0: + <- nid=35 [audio mixer] [src: speaker, mix, monitor] [...] pcm0: + <- nid=27 [pin: Mic (Fixed)] [src: monitor] [...] pcm0: + <- nid=29 [beep widget] [src: speaker] [...] pcm0: + <- nid=11 [audio mixer] [src: mix] [...] pcm0: [...] pcm0: nid=9 [audio input] [...] pcm0: + <- nid=34 [audio mixer] [src: speaker, mix, monitor] [...] pcm0: + <- nid=27 [pin: Mic (Fixed)] [src: monitor] [...] pcm0: + <- nid=29 [beep widget] [src: speaker] [...] pcm0: + <- nid=11 [audio mixer] [src: mix] [...] pcm0: [...] pcm0: Input Mix: [...] pcm0: [...] pcm0: nid=11 [audio mixer] [...] pcm0: + <- nid=27 [pin: Mic (Fixed)] [src: monitor] [...] pcm0: + <- nid=29 [beep widget] [src: speaker] [...] pcm0: [...] pcm0: Master Volume (OSS: vol): -65/0dB [...] pcm0: +- ctl 1 (nid 2 out): -65/0dB (88 steps) [...] pcm0: +- ctl 10 (nid 12 in 0): mute [...] pcm0: +- ctl 11 (nid 12 in 1): mute [...] pcm0: +- ctl 17 (nid 20 in ): mute [...] pcm0: [...] pcm0: PCM Volume (OSS: pcm): -65/0dB [...] pcm0: +- ctl 1 (nid 2 out): -65/0dB (88 steps) [...] pcm0: +- ctl 10 (nid 12 in 0): mute [...] pcm0: [...] pcm0: Microphone2 Volume (OSS: monitor): 0/36dB [...] pcm0: +- ctl 8 (nid 11 in 3): -34/12dB (32 steps) + mute [...] pcm0: +- ctl 23 (nid 27 out): 0/36dB (4 steps) [...] pcm0: +- ctl 28 (nid 34 in 3): mute [...] pcm0: +- ctl 34 (nid 35 in 3): mute [...] pcm0: [...] pcm0: Speaker/Beep Volume (OSS: speaker): -34/12dB [...] pcm0: +- ctl 9 (nid 11 in 4): -34/12dB (32 steps) + mute [...] pcm0: +- ctl 29 (nid 34 in 4): mute [...] pcm0: +- ctl 35 (nid 35 in 4): mute [...] pcm0: [...] pcm0: Recording Level (OSS: rec): -17/30dB [...] pcm0: +- ctl 3 (nid 8 in 0): -17/30dB (64 steps) + mute [...] pcm0: +- ctl 4 (nid 9 in 0): -17/30dB (64 steps) + mute [...] pcm0: +- ctl 28 (nid 34 in 3): mute [...] pcm0: +- ctl 29 (nid 34 in 4): mute [...] pcm0: +- ctl 30 (nid 34 in 5): mute [...] pcm0: +- ctl 34 (nid 35 in 3): mute [...] pcm0: +- ctl 35 (nid 35 in 4): mute [...] pcm0: +- ctl 36 (nid 35 in 5): mute [...] pcm0: [...] pcm0: Input Mix Level (OSS: mix): -34/12dB [...] pcm0: +- ctl 8 (nid 11 in 3): -34/12dB (32 steps) + mute [...] pcm0: +- ctl 9 (nid 11 in 4): -34/12dB (32 steps) + mute [...] pcm0: +- ctl 11 (nid 12 in 1): mute [...] pcm0: +- ctl 30 (nid 34 in 5): mute [...] pcm0: +- ctl 36 (nid 35 in 5): mute [...] pcm0: [...] pcm0: Input Monitoring Level (OSS: igain): 0/0dB [...] pcm0: +- ctl 11 (nid 12 in 1): mute [...] pcm0: [...] pcm0: Mixer "vol": [...] pcm0: Mixer "pcm": [...] pcm0: Mixer "speaker": [...] pcm0: Mixer "mix": [...] pcm0: Mixer "rec": [...] pcm0: Mixer "igain": [...] pcm0: Mixer "ogain": [...] pcm0: Mixer "monitor": [...] battery0: rev = 0000 [...] battery0: units = 0 [...] battery0: dcap = 0 [...] battery0: lfcap = 0 [...] battery0: btech = 0 [...] battery0: dvol = 0 [...] battery0: wcap = 0 [...] battery0: lcap = 0 [...] battery0: cycles = 0 [...] battery0: accuracy = 0 [...] battery0: stmax = 0 [...] battery0: stmin = 0 [...] battery0: aimax = 0 [...] battery0: aimin = 0 [...] battery0: gra1 = 0 [...] battery0: gra2 = 0 [...] battery0: battery initialization done, tried 1 times [...] pcm0: Playback channel set is: Front Left, Front Right, [...] pcm0: Playback channel matrix is: 2.0 (unknown) [...] pcm0: Automatically set rec source to: monitor [...] pcm0: Recording channel set is: Front Left, Front Right, [...] pcm0: Recording channel matrix is: 2.0 (unknown) [...] pcm1: <Realtek ALC233 (Right Analog Headphones)> at nid 33 on hdaa1 [...] pcm1: Playback: [...] pcm1: Stream cap: 0x00000001 PCM [...] pcm1: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz [...] pcm1: DAC: 3 [...] pcm1: [...] pcm1: nid=33 [pin: Headphones (Black Jack)] [...] pcm1: + <- nid=13 [audio mixer] [src: pcm, mix] [...] pcm1: + <- nid=3 [audio output] [src: pcm] [...] pcm1: + <- nid=11 [audio mixer] [src: mix] [...] pcm1: [...] pcm1: Master Volume (OSS: vol): -65/0dB [...] pcm1: +- ctl 2 (nid 3 out): -65/0dB (88 steps) [...] pcm1: +- ctl 12 (nid 13 in 0): mute [...] pcm1: +- ctl 13 (nid 13 in 1): mute [...] pcm1: +- ctl 24 (nid 33 in ): mute [...] pcm1: [...] pcm1: PCM Volume (OSS: pcm): -65/0dB [...] pcm1: +- ctl 2 (nid 3 out): -65/0dB (88 steps) [...] pcm1: +- ctl 12 (nid 13 in 0): mute [...] pcm1: [...] pcm1: Input Mix Level (OSS: mix) [...] pcm1: +- ctl 13 (nid 13 in 1): mute [...] pcm1: [...] pcm1: Input Monitoring Level (OSS: igain): 0/0dB [...] pcm1: +- ctl 13 (nid 13 in 1): mute [...] pcm1: [...] pcm1: Mixer "vol": [...] pcm1: Mixer "pcm": [...] pcm1: Mixer "igain": [...] pcm1: Mixer "ogain": [...] pcm1: Playback channel set is: Front Left, Front Right, [...] pcm1: Playback channel matrix is: 2.0 (disconnected) [...] ahcich0: AHCI reset: device ready after 100ms [...] ahcich1: AHCI reset: device ready after 100ms [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST1000LM024 HN-M101MBB 2BA30001> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <TOSHIBA MK1252GSX LV011C> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 114473MB (234441648 512 byte sectors) [...] GEOM: new disk ada0 [...] pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] pass0: <ST1000LM024 HN-M101MBB 2BA30001> ATA8-ACS SATA 3.x device [...] pass0: Serial Number... [...] pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] pass0: Command Queueing enabled [...] pass1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] pass1: <TOSHIBA MK1252GSX LV011C> ATA8-ACS SATA 2.x device [...] pass1: Serial Number... [...] pass1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] pass1: Command Queueing enabled [...] pci0: driver added [...] found-> vendor=0x8086, dev=0x0a03, revid=0x0b [...] domain=0, bus=0, slot=4, func=0 [...] class=11-80-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pci0:0:4:0: reprobing on driver added [...] found-> vendor=0x8086, dev=0x9c3a, revid=0x04 [...] domain=0, bus=0, slot=22, func=0 [...] class=07-80-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] pci0:0:22:0: reprobing on driver added [...] found-> vendor=0x8086, dev=0x9c22, revid=0x04 [...] domain=0, bus=0, slot=31, func=3 [...] class=0c-05-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=c, irq=255 [...] pci0:0:31:3: reprobing on driver added [...] found-> vendor=0x8086, dev=0x9c24, revid=0x04 [...] domain=0, bus=0, slot=31, func=6 [...] class=11-80-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=c, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pci0:0:31:6: reprobing on driver added [...] pci1: driver added [...] pci2: driver added [...] pci3: driver added [...] pci4: driver added [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 13 ports with 13 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] GEOM: new disk ada1 [...] ugen0.2: <Telink Wireless Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Telink Wireless Receiver, class 0/0, rev 1.10/1.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] ugen0.3: <vendor 0x04f2 USB2.0 VGA UVC WebCam> at usbus0 [...] uhub2: 8 ports with 8 removable, self powered [...] ugen0.4: <vendor 0x04ca product 0x3010> at usbus0 [...] ubt0 on uhub0 [...] ubt0: <vendor 0x04ca product 0x3010, class 224/1, rev 1.10/0.01, addr 3> on usbus0 [...] efirtc0: providing initial system time [...] start_init: trying /sbin/init [...] linprocfs registered [...] linsysfs registered [...] Linux i386 ELF exec handler installed [...] Linux i386 vDSO tsc_selector: 3 [...] Linux i386 vDSO cpu_selector: 2 [...] Linux x86-64 ELF exec handler installed [...] Linux x86-64 vDSO tsc_selector: 3 [...] Linux x86-64 vDSO cpu_selector: 2 [...] Cuse v0.1.37 @ /dev/cuse [...] pci0: driver added [...] found-> vendor=0x8086, dev=0x0a03, revid=0x0b [...] domain=0, bus=0, slot=4, func=0 [...] class=11-80-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pci0:0:4:0: reprobing on driver added [...] found-> vendor=0x8086, dev=0x9c3a, revid=0x04 [...] domain=0, bus=0, slot=22, func=0 [...] class=07-80-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] pci0:0:22:0: reprobing on driver added [...] found-> vendor=0x8086, dev=0x9c22, revid=0x04 [...] domain=0, bus=0, slot=31, func=3 [...] class=0c-05-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=c, irq=255 [...] pci0:0:31:3: reprobing on driver added [...] found-> vendor=0x8086, dev=0x9c24, revid=0x04 [...] domain=0, bus=0, slot=31, func=6 [...] class=11-80-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=c, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pci0:0:31:6: reprobing on driver added [...] pci1: driver added [...] pci2: driver added [...] pci3: driver added [...] pci4: driver added [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] Got stolen memory base 0xafe00000, size 0x20000000 [...] vgapci0: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 53 to local APIC 2 vector 53 [...] vgapci0: using IRQ 53 for MSI [...] drmn0: Adding i2c adapter i915 gmbus ssc [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] drmn0: Adding i2c adapter i915 gmbus vga [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] drmn0: Adding i2c adapter i915 gmbus panel [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] drmn0: Adding i2c adapter i915 gmbus dpc [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] drmn0: Adding i2c adapter i915 gmbus dpb [...] lkpi_iic4: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] drmn0: Adding i2c adapter i915 gmbus dpd [...] lkpi_iic5: <LinuxKPI I2C> on drmn0 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] drm2: Adding i2c adapter AUX A/port A [...] lkpi_iic6: <LinuxKPI I2C> on drm2 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] drm3: Adding i2c adapter AUX B/port B [...] lkpi_iic7: <LinuxKPI I2C> on drm3 [...] iicbus7: <Philips I2C bus> on lkpi_iic7 [...] iic7: <I2C generic I/O> on iicbus7 [...] [drm] Initialized i915 1.6.0 20200917 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=768 width=1366 depth=32 [...] pbase=0xd0000000 vbase=0xfffff800d0000000 [...] name=drmn0 flags=0x0 stride=5504 bpp=32 [...] end FB_INFO [...] ACPI: Processor \134_PR_.CPU4 (ACPI ID 5) ignored [...] ACPI: Processor \134_PR_.CPU5 (ACPI ID 6) ignored [...] ACPI: Processor \134_PR_.CPU6 (ACPI ID 7) ignored [...] ACPI: Processor \134_PR_.CPU7 (ACPI ID 8) ignored [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] pci0: driver added [...] found-> vendor=0x8086, dev=0x0a03, revid=0x0b [...] domain=0, bus=0, slot=4, func=0 [...] class=11-80-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pci0:0:4:0: reprobing on driver added [...] found-> vendor=0x8086, dev=0x9c3a, revid=0x04 [...] domain=0, bus=0, slot=22, func=0 [...] class=07-80-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] pci0:0:22:0: reprobing on driver added [...] found-> vendor=0x8086, dev=0x9c22, revid=0x04 [...] domain=0, bus=0, slot=31, func=3 [...] class=0c-05-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=c, irq=255 [...] pci0:0:31:3: reprobing on driver added [...] ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7a21000-0xf7a210ff at device 31.3 on pci0 [...] pcib0: matched entry for 0.31.INTC [...] pcib0: slot 31 INTC hardwired to IRQ 18 [...] ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 60 [...] smbus0: <System Management Bus> on ichsmb0 [...] found-> vendor=0x8086, dev=0x9c24, revid=0x04 [...] domain=0, bus=0, slot=31, func=6 [...] class=11-80-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=c, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pci0:0:31:6: reprobing on driver added [...] pchtherm0: <Haswell Thermal Subsystem> mem 0xf7a20000-0xf7a20fff at device 31.6 on pci0 [...] pchtherm0: Catastrophic Power Down Locked Disable [...] pchtherm0: SMBus report Locked Enable [...] pchtherm0: SMI on alert Locked Disable [...] pchtherm0: TSPM: 6<Lock,DTSS0EN> [...] pchtherm0: MAX Thermal Sensor Shutdown Time 16s [...] pchtherm0: Throttling 5<Lock,TTEN> [...] pchtherm0: TL2 flag 0 [...] pci1: driver added [...] pci2: driver added [...] pci3: driver added [...] pci4: driver added [...] pci0: driver added [...] found-> vendor=0x8086, dev=0x0a03, revid=0x0b [...] domain=0, bus=0, slot=4, func=0 [...] class=11-80-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pci0:0:4:0: reprobing on driver added [...] found-> vendor=0x8086, dev=0x9c3a, revid=0x04 [...] domain=0, bus=0, slot=22, func=0 [...] class=07-80-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] pci0:0:22:0: reprobing on driver added [...] pci1: driver added [...] pci2: driver added [...] pci3: driver added [...] pci4: driver added [...] wlan0: bpf attached [...] wlan0: bpf attached [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: link state changed to UP [...] ums0 on uhub0 [...] ums0: <Telink Wireless Receiver, class 0/0, rev 1.10/1.00, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled