[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p3 stable/24.7-n267802-bc5627fc5f3 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0xaa to 0xb8 [...] CPU: 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz (2995.20-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806c1 Family=0x6 Model=0x8c Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf3bfa7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x18c05fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc100710<FSRM,AVX512VP2INTERSECT,MCUOPT,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa005c6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16313098240 (15557 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <GBT GBTUACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x44ca8000-0x44ca801e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <GBT GBTUACPI> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x607e000000-0x607effffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x88500000-0x88503fff,0x88504000-0x885040ff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pcib4: <ACPI PCI-PCI bridge> at device 7.2 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> at device 7.3 on pci0 [...] xhci0: <Intel Tiger Lake-LP Thunderbolt 4 USB controller> mem 0x607f1b0000-0x607f1bffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <serial bus, USB> at device 13.2 (no driver attached) [...] pci0: <serial bus, USB> at device 13.3 (no driver attached) [...] pcib6: <Intel Volume Management Device> mem 0x607c000000-0x607dffffff,0x50000000-0x51ffffff,0x607f000000-0x607f0fffff at device 14.0 on pci0 [...] pci2: <PCI bus> on pcib6 [...] xhci1: <Intel Tiger Lake-LP USB 3.2 controller> mem 0x607f1a0000-0x607f1affff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <network> at device 20.3 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pcib7: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib7 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0x88300000-0x883fffff,0x88400000-0x88403fff at device 0.0 on pci3 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 2 RX queues 2 TX queues [...] igc0: Using MSI-X interrupts with 3 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V TGP(13)> mem 0x88600000-0x8861ffff at device 31.6 on pci0 [...] em0: EEPROM V0.6-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1497609094 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvme0: Allocated 200MB host memory buffer [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <WD Blue SN570 500GB 234110WD 222446808313> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 5 ports with 5 removable, self powered [...] uhub1: 16 ports with 16 removable, self powered [...] ugen1.2: <Generic USB2.1 Hub> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <Generic USB2.1 Hub, class 9/0, rev 2.10/1.51, addr 1> on usbus1 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen1.3: <vendor 0x8087 product 0x0026> at usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.4: <Generic USB3.2 Hub> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <Generic USB3.2 Hub, class 9/0, rev 3.20/1.51, addr 3> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub3: 4 ports with 4 removable, self powered [...] pid 31 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] CPU: 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz (2995.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806c1 Family=0x6 Model=0x8c Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf3bfa7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x18c05fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc100710<FSRM,AVX512VP2INTERSECT,MCUOPT,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa005c6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] igc0: link state changed to UP [...] em0: link state changed to UP [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] iwlwifi0: <iwlwifi> mem 0x607f1c8000-0x607f1cbfff at device 20.3 on pci0 [...] iwlwifi0: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000 [...] iwlwifi0: PCI dev a0f0/0074, rev=0x351, rfid=0x10a100 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-QuZ-a0-hr-b0-77.ucode' [...] iwlwifi0: api flags index 2 larger than supported by driver [...] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [...] iwlwifi0: loaded firmware version 77.2df8986f.0 QuZ-a0-hr-b0-77.ucode op_mode iwlmvm [...] iwlwifi0: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351 [...] iwlwifi0: Detected RF HR B3, rfid=0x10a100 [...] iwlwifi0: base HW address: XXX [...] ichsmb0: <Intel Tiger Lake SMBus controller> port 0xefa0-0xefbf mem 0x607f1d0000-0x607f1d00ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] wg0: link state changed to UP [...] igc0: link state changed to DOWN [...] em0: link state changed to DOWN [...] ng0: changing name to 'pppoe0' [...] igc0: link state changed to UP [...] em0: link state changed to UP [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 5h2m24s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p3 stable/24.7-n267802-bc5627fc5f3 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0xaa to 0xb8 [...] CPU: 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz (2995.20-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806c1 Family=0x6 Model=0x8c Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf3bfa7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x18c05fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc100710<FSRM,AVX512VP2INTERSECT,MCUOPT,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa005c6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16313098240 (15557 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <GBT GBTUACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x44ca8000-0x44ca801e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <GBT GBTUACPI> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x607e000000-0x607effffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x88500000-0x88503fff,0x88504000-0x885040ff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pcib4: <ACPI PCI-PCI bridge> at device 7.2 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> at device 7.3 on pci0 [...] xhci0: <Intel Tiger Lake-LP Thunderbolt 4 USB controller> mem 0x607f1b0000-0x607f1bffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <serial bus, USB> at device 13.2 (no driver attached) [...] pci0: <serial bus, USB> at device 13.3 (no driver attached) [...] pcib6: <Intel Volume Management Device> mem 0x607c000000-0x607dffffff,0x50000000-0x51ffffff,0x607f000000-0x607f0fffff at device 14.0 on pci0 [...] pci2: <PCI bus> on pcib6 [...] xhci1: <Intel Tiger Lake-LP USB 3.2 controller> mem 0x607f1a0000-0x607f1affff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <network> at device 20.3 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pcib7: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib7 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0x88300000-0x883fffff,0x88400000-0x88403fff at device 0.0 on pci3 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 2 RX queues 2 TX queues [...] igc0: Using MSI-X interrupts with 3 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V TGP(13)> mem 0x88600000-0x8861ffff at device 31.6 on pci0 [...] em0: EEPROM V0.6-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1497609092 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvme0: Allocated 200MB host memory buffer [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <WD Blue SN570 500GB 234110WD 222446808313> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 5 ports with 5 removable, self powered [...] uhub0: 16 ports with 16 removable, self powered [...] ugen1.2: <Generic USB2.1 Hub> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <Generic USB2.1 Hub, class 9/0, rev 2.10/1.51, addr 1> on usbus1 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.3: <vendor 0x8087 product 0x0026> at usbus1 [...] ugen1.4: <Generic USB3.2 Hub> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <Generic USB3.2 Hub, class 9/0, rev 3.20/1.51, addr 3> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub3: 4 ports with 4 removable, self powered [...] pid 31 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] CPU: 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz (2995.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806c1 Family=0x6 Model=0x8c Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf3bfa7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x18c05fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc100710<FSRM,AVX512VP2INTERSECT,MCUOPT,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa005c6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] igc0: link state changed to UP [...] em0: link state changed to UP [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] iwlwifi0: <iwlwifi> mem 0x607f1c8000-0x607f1cbfff at device 20.3 on pci0 [...] iwlwifi0: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000 [...] iwlwifi0: PCI dev a0f0/0074, rev=0x351, rfid=0x10a100 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-QuZ-a0-hr-b0-77.ucode' [...] iwlwifi0: api flags index 2 larger than supported by driver [...] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [...] iwlwifi0: loaded firmware version 77.2df8986f.0 QuZ-a0-hr-b0-77.ucode op_mode iwlmvm [...] iwlwifi0: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351 [...] iwlwifi0: Detected RF HR B3, rfid=0x10a100 [...] iwlwifi0: base HW address: XXX [...] ichsmb0: <Intel Tiger Lake SMBus controller> port 0xefa0-0xefbf mem 0x607f1d0000-0x607f1d00ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] wg0: link state changed to UP [...] igc0: link state changed to DOWN [...] em0: link state changed to DOWN [...] ng0: changing name to 'pppoe0' [...] igc0: link state changed to UP [...] em0: link state changed to UP [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igc0, outif pppoe0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igc0, outif pppoe0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igc0, outif pppoe0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igc0, outif pppoe0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igc0, outif pppoe0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igc0, outif pppoe0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igc0, outif pppoe0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igc0, outif pppoe0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igc0, outif pppoe0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igc0, outif pppoe0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 4d2h56m25s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p3 stable/24.7-n267802-bc5627fc5f3 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0xaa to 0xb8 [...] CPU: 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz (2995.20-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806c1 Family=0x6 Model=0x8c Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf3bfa7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x18c05fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc100710<FSRM,AVX512VP2INTERSECT,MCUOPT,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa005c6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16313094144 (15557 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <GBT GBTUACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x44ca8000-0x44ca801e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <GBT GBTUACPI> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x607e000000-0x607effffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x88500000-0x88503fff,0x88504000-0x885040ff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pcib4: <ACPI PCI-PCI bridge> at device 7.2 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> at device 7.3 on pci0 [...] xhci0: <Intel Tiger Lake-LP Thunderbolt 4 USB controller> mem 0x607f1b0000-0x607f1bffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <serial bus, USB> at device 13.2 (no driver attached) [...] pci0: <serial bus, USB> at device 13.3 (no driver attached) [...] pcib6: <Intel Volume Management Device> mem 0x607c000000-0x607dffffff,0x50000000-0x51ffffff,0x607f000000-0x607f0fffff at device 14.0 on pci0 [...] pci2: <PCI bus> on pcib6 [...] xhci1: <Intel Tiger Lake-LP USB 3.2 controller> mem 0x607f1a0000-0x607f1affff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <network> at device 20.3 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pcib7: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib7 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0x88300000-0x883fffff,0x88400000-0x88403fff at device 0.0 on pci3 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 2 RX queues 2 TX queues [...] igc0: Using MSI-X interrupts with 3 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V TGP(13)> mem 0x88600000-0x8861ffff at device 31.6 on pci0 [...] em0: EEPROM V0.6-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1497608983 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvme0: Allocated 200MB host memory buffer [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <WD Blue SN570 500GB 234110WD 222446808313> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 5 ports with 5 removable, self powered [...] uhub1: 16 ports with 16 removable, self powered [...] ugen1.2: <Generic USB2.1 Hub> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <Generic USB2.1 Hub, class 9/0, rev 2.10/1.51, addr 1> on usbus1 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.3: <vendor 0x8087 product 0x0026> at usbus1 [...] ugen1.4: <Generic USB3.2 Hub> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <Generic USB3.2 Hub, class 9/0, rev 3.20/1.51, addr 3> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub3: 4 ports with 4 removable, self powered [...] pid 31 (zpool) is attempting to use unsafe AIO requests - not logging anymore