[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: AMD C-60 APU with Radeon(tm) HD Graphics (997.92-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x500f20 Family=0x14 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=8 [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3681849344 (3511 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0: MADT APIC ID 0 != hw id 3 [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0460-0xf047e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfeb00000-0xfeb3ffff irq 18 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI (0x1314) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 19 at device 1.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb4f000-0xfeb4f3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb4e000-0xfeb4efff irq 18 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb4d000-0xfeb4d0ff irq 17 at device 18.2 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb4c000-0xfeb4cfff irq 18 at device 19.0 on pci0 [...] usbus2 on ohci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb4b000-0xfeb4b0ff irq 17 at device 19.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfeb40000-0xfeb43fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xe100-0xe1ff mem 0xfea41000-0xfea410ff irq 20 at device 0.0 on pci1 [...] re0: Chip rev. 0x10000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfea40000-0xfea400ff irq 21 at device 1.0 on pci1 [...] re1: Chip rev. 0x10000000 [...] re1: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb4a000-0xfeb4afff irq 18 at device 20.5 on pci0 [...] usbus4 on ohci2 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 21.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 18 at device 0.0 on pci3 [...] re2: Using 1 MSI-X message [...] re2: Chip rev. 0x2c800000 [...] re2: MAC rev. 0x00100000 [...] miibus2: <MII bus> on re2 [...] rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2 [...] rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re2: Using defaults for TSO: 65518/35/2048 [...] re2: Ethernet address: ... [...] re2: netmap queues/slots: TX 1/256, RX 1/256 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb49000-0xfeb49fff irq 18 at device 22.0 on pci0 [...] usbus5 on ohci3 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb48000-0xfeb480ff irq 17 at device 22.2 on pci0 [...] usbus6: EHCI version 1.0 [...] usbus6 on ehci2 [...] usbus6: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 drq 3 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] Timecounter "TSC" frequency 997874702 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC662 rev1 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC662 rev1 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa1 [...] pcm2: <Realtek ALC662 rev1 (Rear Digital)> at nid 30 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] ugen6.1: <ATI EHCI root HUB> at usbus6 [...] uhub0 on usbus5 [...] uhub1 on usbus6 [...] uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub2 on usbus2 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub3 on usbus4 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] ugen1.1: <ATI EHCI root HUB> at usbus1 [...] uhub4 on usbus0 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub5 on usbus1 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] uhub6 on usbus3 [...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <HGST HCC545050A7E380 GG2OAC90> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] uhub3: 2 ports with 2 removable, self powered [...] uhub0: 4 ports with 4 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] uhub4: 5 ports with 5 removable, self powered [...] Root mount waiting for: usbus1 usbus3 usbus6 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub6: 5 ports with 5 removable, self powered [...] uhub5: 5 ports with 5 removable, self powered [...] Root mount waiting for: usbus1 [...] usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored) [...] ugen2.2: <2.4G Wireless K+M Wireless Input device> at usbus2 [...] ukbd0 on uhub2 [...] ukbd0: <2.4G Wireless K+M Wireless Input device, class 0/0, rev 1.10/11.22, addr 2> on usbus2 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device HP v221w (0x03f0:0xf807) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device HP v221w (0x03f0:0xf807) [...] Root mount waiting for: usbus1 [...] ugen1.2: <HP v221w> at usbus1 [...] umass0 on uhub5 [...] umass0: <HP v221w, class 0/0, rev 2.00/11.00, addr 2> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:6:0: Attached to scbus6 [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <hp v221w 1100> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 15216MB (31162368 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] re0: link state changed to DOWN [...] re1: link state changed to UP [...] re2: link state changed to UP [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] ums0 on uhub2 [...] ums0: <2.4G Wireless K+M Wireless Input device, class 0/0, rev 1.10/11.22, addr 2> on usbus2 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to DOWN [...] re2: link state changed to DOWN [...] re1: link state changed to UP [...] re2: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... fsync: giving up on dirty (error = 35) 0xfffff800037cfd58: type VCHR [...] usecount 1, writecount 0, refcount 224 seqc users 0 rdev 0xfffff800175aa000 [...] hold count flags () [...] flags () [...] v_object 0xfffff8000306ec60 ref 0 pages 14108 cleanbuf 221 dirtybuf 1 [...] lock type mntfs: EXCL by thread 0xfffffe006a592020 (pid 17, syncer, tid 100108) [...] [...] Syncing disks, vnodes remaining... 5 1 0 0 done [...] All buffers synced. [...] Uptime: 23m46s [...] uhub1: detached [...] uhub0: detached [...] re2: link state changed to DOWN [...] re2: link state changed to UP [...] uhub3: detached [...] uhub6: detached [...] ukbd0: detached [...] ums0: detached [...] uhub2: detached [...] umass0: detached [...] uhub5: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device HP v221w (0x03f0:0xf807) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device HP v221w (0x03f0:0xf807) [...] ugen0.2: <HP v221w> at usbus0 [...] umass0 on uhub4 [...] umass0: <HP v221w, class 0/0, rev 2.00/11.00, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:6:0: Attached to scbus6 [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] uhub4: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255007-1d6e165fb40 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: AMD C-60 APU with Radeon(tm) HD Graphics (997.91-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x500f20 Family=0x14 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=8 [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3681849344 (3511 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0: MADT APIC ID 0 != hw id 3 [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0460-0xf047e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfeb00000-0xfeb3ffff irq 18 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI (0x1314) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 19 at device 1.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb4f000-0xfeb4f3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb4e000-0xfeb4efff irq 18 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb4d000-0xfeb4d0ff irq 17 at device 18.2 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb4c000-0xfeb4cfff irq 18 at device 19.0 on pci0 [...] usbus2 on ohci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb4b000-0xfeb4b0ff irq 17 at device 19.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfeb40000-0xfeb43fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xe100-0xe1ff mem 0xfea41000-0xfea410ff irq 20 at device 0.0 on pci1 [...] re0: Chip rev. 0x10000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfea40000-0xfea400ff irq 21 at device 1.0 on pci1 [...] re1: Chip rev. 0x10000000 [...] re1: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb4a000-0xfeb4afff irq 18 at device 20.5 on pci0 [...] usbus4 on ohci2 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 21.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 18 at device 0.0 on pci3 [...] re2: Using 1 MSI-X message [...] re2: Chip rev. 0x2c800000 [...] re2: MAC rev. 0x00100000 [...] miibus2: <MII bus> on re2 [...] rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2 [...] rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re2: Using defaults for TSO: 65518/35/2048 [...] re2: Ethernet address: ... [...] re2: netmap queues/slots: TX 1/256, RX 1/256 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb49000-0xfeb49fff irq 18 at device 22.0 on pci0 [...] usbus5 on ohci3 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb48000-0xfeb480ff irq 17 at device 22.2 on pci0 [...] usbus6: EHCI version 1.0 [...] usbus6 on ehci2 [...] usbus6: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 drq 3 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] Timecounter "TSC" frequency 997874538 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC662 rev1 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC662 rev1 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa1 [...] pcm2: <Realtek ALC662 rev1 (Rear Digital)> at nid 30 on hdaa1 [...] ugen1.1: <ATI EHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub1 on usbus4 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] ugen6.1: <ATI EHCI root HUB> at usbus6 [...] uhub2 on usbus5 [...] uhub3 on usbus6 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] uhub4 on usbus2 [...] uhub5 on usbus0 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] uhub6 on usbus3 [...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <HGST HCC545050A7E380 GG2OAC90> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] uhub4: 5 ports with 5 removable, self powered [...] uhub5: 5 ports with 5 removable, self powered [...] Root mount waiting for: usbus1 usbus3 usbus6 [...] uhub3: 4 ports with 4 removable, self powered [...] uhub6: 5 ports with 5 removable, self powered [...] uhub0: 5 ports with 5 removable, self powered [...] Root mount waiting for: usbus1 [...] usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored) [...] ugen2.2: <2.4G Wireless K+M Wireless Input device> at usbus2 [...] ukbd0 on uhub4 [...] ukbd0: <2.4G Wireless K+M Wireless Input device, class 0/0, rev 1.10/11.22, addr 2> on usbus2 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device HP v221w (0x03f0:0xf807) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device HP v221w (0x03f0:0xf807) [...] Root mount waiting for: usbus1 [...] ugen1.2: <HP v221w> at usbus1 [...] umass0 on uhub0 [...] umass0: <HP v221w, class 0/0, rev 2.00/11.00, addr 2> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:6:0: Attached to scbus6 [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <hp v221w 1100> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 15216MB (31162368 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE>