[...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0xfe880000-0xfe8fffff,0xfea70000-0xfea73fff irq 17 at device 0.3 on pci2 [...] igb3: EEPROM V3.29-0 eTrack 0x8000027a [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe5ffc00-0xfe5fffff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fe000-0xfe5fefff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fd000-0xfe5fdfff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5f7000-0xfe5f7fff irq 18 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff400-0xfe5ff4ff irq 19 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe5f0000-0xfe5f3fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1549999007 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] uhub0 on usbus2 [...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus3 [...] uhub2 on usbus0 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub3 on usbus5 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub4 on usbus4 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub5 on usbus1 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC888 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC888 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: <Realtek ALC888 (Rear Digital)> at nid 17 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub5: 3 ports with 3 removable, self powered [...] uhub4: 3 ports with 3 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada0: <ST3250824AS 3.AAE> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] Root mount waiting for: usbus2 usbus5 [...] Root mount waiting for: usbus2 usbus5 [...] uhub0: 6 ports with 6 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] ugen0.2: <SINO WEALTH USB KEYBOARD> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] uhid0 on uhub2 [...] uhid0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] lo0: link state changed to UP [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] bridge0: Ethernet address: ... [...] bridge0: link state changed to UP [...] igb1: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb0: promiscuous mode enabled [...] 164.490990 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 164.491033 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 164.491057 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 164.656562 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] 165.489936 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 165.489975 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 165.490001 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 53m54s [...] uhub3: detached [...] uhub4: detached [...] uhub1: detached [...] uhub0: detached [...] uhub5: detached [...] ukbd0: detached [...] uhid0: detached [...] uhub2: detached [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267992-a8a728bd015 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: AMD Athlon(tm) II X4 645 Processor (3100.15-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8248545280 (7866 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-CPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfb730-0xfb74e [...] smbios0: Version: 2.6 [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-CPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xfa000000-0xfbffffff,0xfe6f0000-0xfe6fffff,0xfe700000-0xfe7fffff irq 18 at device 5.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RS880 HDA Controller> mem 0xfe6e8000-0xfe6ebfff irq 19 at device 5.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I340 82580 (Copper)> mem 0xfea80000-0xfeafffff,0xfea7c000-0xfea7ffff irq 16 at device 0.0 on pci2 [...] igb0: EEPROM V3.29-0 eTrack 0x8000027a [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> mem 0xfe980000-0xfe9fffff,0xfea78000-0xfea7bfff irq 19 at device 0.1 on pci2 [...] igb1: EEPROM V3.29-0 eTrack 0x8000027a [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> mem 0xfe900000-0xfe97ffff,0xfea74000-0xfea77fff irq 18 at device 0.2 on pci2 [...] igb2: EEPROM V3.29-0 eTrack 0x8000027a [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0xfe880000-0xfe8fffff,0xfea70000-0xfea73fff irq 17 at device 0.3 on pci2 [...] igb3: EEPROM V3.29-0 eTrack 0x8000027a [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe5ffc00-0xfe5fffff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fe000-0xfe5fefff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fd000-0xfe5fdfff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5f7000-0xfe5f7fff irq 18 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff400-0xfe5ff4ff irq 19 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe5f0000-0xfe5f3fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1549998246 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] uhub0 on usbus5 [...] uhub1 on usbus3 [...] uhub2 on usbus2 [...] uhub3 on usbus1 [...] uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub4 on usbus0 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub5 on usbus4 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC888 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC888 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: <Realtek ALC888 (Rear Digital)> at nid 17 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub3: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] uhub5: 3 ports with 3 removable, self powered [...] uhub4: 3 ports with 3 removable, self powered [...] ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada0: <ST3250824AS 3.AAE> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] Root mount waiting for: usbus2 usbus5 [...] Root mount waiting for: usbus2 usbus5 [...] uhub0: 6 ports with 6 removable, self powered [...] uhub2: 6 ports with 6 removable, self powered [...] ugen0.2: <SINO WEALTH USB KEYBOARD> at usbus0 [...] ukbd0 on uhub4 [...] ukbd0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] uhid0 on uhub4 [...] uhid0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] lo0: link state changed to UP [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] bridge0: Ethernet address: ... [...] bridge0: link state changed to UP [...] igb1: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb0: promiscuous mode enabled [...] 424.815836 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 424.815882 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 424.815909 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 425.016846 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] 425.860595 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 425.860681 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 425.860706 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to UP [...] tun0: link state changed to UP [...] tun0: changing name to 'tailscale0' [...] ugen0.2: <SINO WEALTH USB KEYBOARD> at usbus0 (disconnected) [...] ukbd0: at uhub4, port 1, addr 2 (disconnected) [...] ukbd0: detached [...] uhid0: at uhub4, port 1, addr 2 (disconnected) [...] uhid0: detached [...] ugen0.2: <SINO WEALTH USB KEYBOARD> at usbus0 [...] ukbd0 on uhub4 [...] ukbd0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] uhid0 on uhub4 [...] uhid0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267992-a8a728bd015 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: AMD Athlon(tm) II X4 645 Processor (3100.04-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8246657024 (7864 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-CPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfb730-0xfb74e [...] smbios0: Version: 2.6 [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-CPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xfa000000-0xfbffffff,0xfe6f0000-0xfe6fffff,0xfe700000-0xfe7fffff irq 18 at device 5.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RS880 HDA Controller> mem 0xfe6e8000-0xfe6ebfff irq 19 at device 5.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I340 82580 (Copper)> mem 0xfea80000-0xfeafffff,0xfea7c000-0xfea7ffff irq 16 at device 0.0 on pci2 [...] igb0: EEPROM V3.29-0 eTrack 0x8000027a [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> mem 0xfe980000-0xfe9fffff,0xfea78000-0xfea7bfff irq 19 at device 0.1 on pci2 [...] igb1: EEPROM V3.29-0 eTrack 0x8000027a [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> mem 0xfe900000-0xfe97ffff,0xfea74000-0xfea77fff irq 18 at device 0.2 on pci2 [...] igb2: EEPROM V3.29-0 eTrack 0x8000027a [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0xfe880000-0xfe8fffff,0xfea70000-0xfea73fff irq 17 at device 0.3 on pci2 [...] igb3: EEPROM V3.29-0 eTrack 0x8000027a [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe5ffc00-0xfe5fffff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fe000-0xfe5fefff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fd000-0xfe5fdfff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5f7000-0xfe5f7fff irq 18 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff400-0xfe5ff4ff irq 19 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe5f0000-0xfe5f3fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1549999794 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub1 on usbus2 [...] uhub2 on usbus0 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub3 on usbus4 [...] uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] uhub4 on usbus3 [...] uhub5 on usbus5 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC888 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC888 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: <Realtek ALC888 (Rear Digital)> at nid 17 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub4: 3 ports with 3 removable, self powered [...] uhub3: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada0: <ST3250824AS 3.AAE> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] Root mount waiting for: usbus2 usbus5 [...] uhub5: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus2 usbus5 [...] uhub1: 6 ports with 6 removable, self powered [...] ugen0.2: <SINO WEALTH USB KEYBOARD> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary [...] CPU: AMD Athlon(tm) II X4 645 Processor (3100.00-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] uhid0 on uhub2 [...] uhid0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] lo0: link state changed to UP [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] bridge0: Ethernet address: ... [...] bridge0: link state changed to UP [...] igb1: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb0: promiscuous mode enabled [...] 893.230693 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 893.230741 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 893.230767 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 893.429685 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] 894.287650 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 894.287703 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 894.287731 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267992-a8a728bd015 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: AMD Athlon(tm) II X4 645 Processor (3100.16-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8246661120 (7864 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-CPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfb730-0xfb74e [...] smbios0: Version: 2.6 [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-CPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xfa000000-0xfbffffff,0xfe6f0000-0xfe6fffff,0xfe700000-0xfe7fffff irq 18 at device 5.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RS880 HDA Controller> mem 0xfe6e8000-0xfe6ebfff irq 19 at device 5.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I340 82580 (Copper)> mem 0xfea80000-0xfeafffff,0xfea7c000-0xfea7ffff irq 16 at device 0.0 on pci2 [...] igb0: EEPROM V3.29-0 eTrack 0x8000027a [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> mem 0xfe980000-0xfe9fffff,0xfea78000-0xfea7bfff irq 19 at device 0.1 on pci2 [...] igb1: EEPROM V3.29-0 eTrack 0x8000027a [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> mem 0xfe900000-0xfe97ffff,0xfea74000-0xfea77fff irq 18 at device 0.2 on pci2 [...] igb2: EEPROM V3.29-0 eTrack 0x8000027a [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0xfe880000-0xfe8fffff,0xfea70000-0xfea73fff irq 17 at device 0.3 on pci2 [...] igb3: EEPROM V3.29-0 eTrack 0x8000027a [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe5ffc00-0xfe5fffff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fe000-0xfe5fefff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fd000-0xfe5fdfff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5f7000-0xfe5f7fff irq 18 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff400-0xfe5ff4ff irq 19 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe5f0000-0xfe5f3fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1550000008 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] uhub0 on usbus1 [...] uhub1 on usbus5 [...] uhub2 on usbus0 [...] uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub3 on usbus3 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] uhub4 on usbus4 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub5 on usbus2 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC888 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC888 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: <Realtek ALC888 (Rear Digital)> at nid 17 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub2: 3 ports with 3 removable, self powered [...] uhub4: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub3: 3 ports with 3 removable, self powered [...] ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada0: <ST3250824AS 3.AAE> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] Root mount waiting for: usbus2 usbus5 [...] Root mount waiting for: usbus2 usbus5 [...] uhub1: 6 ports with 6 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] ugen0.2: <SINO WEALTH USB KEYBOARD> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary [...] CPU: AMD Athlon(tm) II X4 645 Processor (3100.00-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] uhid0 on uhub2 [...] uhid0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] lo0: link state changed to UP [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] bridge0: Ethernet address: ... [...] bridge0: link state changed to UP [...] igb1: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb0: promiscuous mode enabled [...] 572.553018 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 572.553064 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 572.553089 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 572.715493 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] 573.558659 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 573.558710 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 573.558745 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267992-a8a728bd015 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: AMD Athlon(tm) II X4 645 Processor (3100.07-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8246661120 (7864 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-CPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfb730-0xfb74e [...] smbios0: Version: 2.6 [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-CPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xfa000000-0xfbffffff,0xfe6f0000-0xfe6fffff,0xfe700000-0xfe7fffff irq 18 at device 5.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RS880 HDA Controller> mem 0xfe6e8000-0xfe6ebfff irq 19 at device 5.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I340 82580 (Copper)> mem 0xfea80000-0xfeafffff,0xfea7c000-0xfea7ffff irq 16 at device 0.0 on pci2 [...] igb0: EEPROM V3.29-0 eTrack 0x8000027a [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> mem 0xfe980000-0xfe9fffff,0xfea78000-0xfea7bfff irq 19 at device 0.1 on pci2 [...] igb1: EEPROM V3.29-0 eTrack 0x8000027a [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> mem 0xfe900000-0xfe97ffff,0xfea74000-0xfea77fff irq 18 at device 0.2 on pci2 [...] igb2: EEPROM V3.29-0 eTrack 0x8000027a [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0xfe880000-0xfe8fffff,0xfea70000-0xfea73fff irq 17 at device 0.3 on pci2 [...] igb3: EEPROM V3.29-0 eTrack 0x8000027a [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe5ffc00-0xfe5fffff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fe000-0xfe5fefff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fd000-0xfe5fdfff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5f7000-0xfe5f7fff irq 18 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff400-0xfe5ff4ff irq 19 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe5f0000-0xfe5f3fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1549999783 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub0 on usbus2 [...] uhub1 on usbus1 [...] uhub2 on usbus0 [...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub3 on usbus5 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub4 on usbus3 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub5 on usbus4 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC888 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC888 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: <Realtek ALC888 (Rear Digital)> at nid 17 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub2: 3 ports with 3 removable, self powered [...] uhub5: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] uhub4: 3 ports with 3 removable, self powered [...] ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada0: <ST3250824AS 3.AAE> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] Root mount waiting for: usbus2 usbus5 [...] Root mount waiting for: usbus2 usbus5 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub0: 6 ports with 6 removable, self powered [...] ugen0.2: <SINO WEALTH USB KEYBOARD> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary [...] CPU: AMD Athlon(tm) II X4 645 Processor (3100.00-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] uhid0 on uhub2 [...] uhid0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] lo0: link state changed to UP [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] bridge0: Ethernet address: ... [...] bridge0: link state changed to UP [...] igb1: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb0: promiscuous mode enabled [...] 219.122577 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 219.122623 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 219.122649 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 219.302198 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] 220.129992 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 220.130044 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 220.130069 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267992-a8a728bd015 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: AMD Athlon(tm) II X4 645 Processor (3100.19-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8246661120 (7864 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-CPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfb730-0xfb74e [...] smbios0: Version: 2.6 [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-CPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xfa000000-0xfbffffff,0xfe6f0000-0xfe6fffff,0xfe700000-0xfe7fffff irq 18 at device 5.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RS880 HDA Controller> mem 0xfe6e8000-0xfe6ebfff irq 19 at device 5.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I340 82580 (Copper)> mem 0xfea80000-0xfeafffff,0xfea7c000-0xfea7ffff irq 16 at device 0.0 on pci2 [...] igb0: EEPROM V3.29-0 eTrack 0x8000027a [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> mem 0xfe980000-0xfe9fffff,0xfea78000-0xfea7bfff irq 19 at device 0.1 on pci2 [...] igb1: EEPROM V3.29-0 eTrack 0x8000027a [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> mem 0xfe900000-0xfe97ffff,0xfea74000-0xfea77fff irq 18 at device 0.2 on pci2 [...] igb2: EEPROM V3.29-0 eTrack 0x8000027a [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0xfe880000-0xfe8fffff,0xfea70000-0xfea73fff irq 17 at device 0.3 on pci2 [...] igb3: EEPROM V3.29-0 eTrack 0x8000027a [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe5ffc00-0xfe5fffff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fe000-0xfe5fefff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fd000-0xfe5fdfff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5f7000-0xfe5f7fff irq 18 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff400-0xfe5ff4ff irq 19 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe5f0000-0xfe5f3fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1549999761 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub1 on usbus2 [...] uhub2 on usbus1 [...] uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub3 on usbus3 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] uhub4 on usbus4 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub5 on usbus5 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC888 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC888 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: <Realtek ALC888 (Rear Digital)> at nid 17 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub2: 3 ports with 3 removable, self powered [...] uhub4: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub3: 3 ports with 3 removable, self powered [...] ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada0: <ST3250824AS 3.AAE> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] Root mount waiting for: usbus2 usbus5 [...] uhub5: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus2 usbus5 [...] uhub1: 6 ports with 6 removable, self powered [...] ugen0.2: <SINO WEALTH USB KEYBOARD> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary [...] CPU: AMD Athlon(tm) II X4 645 Processor (3100.00-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] uhid0 on uhub0 [...] uhid0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] lo0: link state changed to UP [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] bridge0: Ethernet address: ... [...] bridge0: link state changed to UP [...] igb1: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb0: promiscuous mode enabled [...] 691.507418 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 691.507463 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 691.507488 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 691.669691 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] 692.515213 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 692.515278 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 692.515304 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267992-a8a728bd015 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: AMD Athlon(tm) II X4 645 Processor (3100.06-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8246657024 (7864 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-CPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfb730-0xfb74e [...] smbios0: Version: 2.6 [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-CPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xfa000000-0xfbffffff,0xfe6f0000-0xfe6fffff,0xfe700000-0xfe7fffff irq 18 at device 5.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RS880 HDA Controller> mem 0xfe6e8000-0xfe6ebfff irq 19 at device 5.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I340 82580 (Copper)> mem 0xfea80000-0xfeafffff,0xfea7c000-0xfea7ffff irq 16 at device 0.0 on pci2 [...] igb0: EEPROM V3.29-0 eTrack 0x8000027a [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> mem 0xfe980000-0xfe9fffff,0xfea78000-0xfea7bfff irq 19 at device 0.1 on pci2 [...] igb1: EEPROM V3.29-0 eTrack 0x8000027a [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> mem 0xfe900000-0xfe97ffff,0xfea74000-0xfea77fff irq 18 at device 0.2 on pci2 [...] igb2: EEPROM V3.29-0 eTrack 0x8000027a [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0xfe880000-0xfe8fffff,0xfea70000-0xfea73fff irq 17 at device 0.3 on pci2 [...] igb3: EEPROM V3.29-0 eTrack 0x8000027a [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe5ffc00-0xfe5fffff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fe000-0xfe5fefff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fd000-0xfe5fdfff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5f7000-0xfe5f7fff irq 18 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff400-0xfe5ff4ff irq 19 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe5f0000-0xfe5f3fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1549999898 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub0 on usbus0 [...] uhub1 on usbus1 [...] uhub2 on usbus5 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub3 on usbus4 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] uhub4 on usbus3 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub5 on usbus2 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC888 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC888 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: <Realtek ALC888 (Rear Digital)> at nid 17 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 3 ports with 3 removable, self powered [...] uhub4: 3 ports with 3 removable, self powered [...] uhub3: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada0: <ST3250824AS 3.AAE> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] Root mount waiting for: usbus2 usbus5 [...] Root mount waiting for: usbus2 usbus5 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] ugen0.2: <SINO WEALTH USB KEYBOARD> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <SINO WEALTH USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary