[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8193077248 (7813 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1346910705 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000020 [4347] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x27> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7e34000-0xf7e37fff at device 3.0 on pci0 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point-LP HECI KT> port 0xf0e0-0xf0e7 mem 0xf7e3d000-0xf7e3dfff at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e3c000-0xf7e3cfff at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf7e30000-0xf7e33fff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7c01000-0xf7c01fff,0xf7c00000-0xf7c007ff at device 0.0 on pci3 [...] sdhci_pci0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. [...] sdhci_pci0: 1 slot(s) allocated [...] ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xf7e3b000-0xf7e3b3ff at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8M+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e3a000-0xf7e3a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC292 (Analog)> at nid 22 and 18 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] Trying to mount root from ufs:/dev/ada0p4 [rw]... [...] Root mount waiting for: usbus0 usbus1 CAM [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <SAMSUNG SSD PM851 mSATA 512GB EXT48D0Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] uhub0: 13 ports with 13 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] uhub1: 3 ports with 3 removable, self powered [...] ugen0.2: <SunplusIT Inc LaptopIntegratedWebcamHD> at usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub2: 8 ports with 8 removable, self powered [...] ugen1.3: <vendor 0x8087 product 0x07dc> at usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.4: <Atmel Atmel maXTouch Digitizer> at usbus1 [...] mountroot: waiting for device /dev/ada0p4... [...] ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7e39000-0xf7e390ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xf7d00000-0xf7d01fff at device 0.0 on pci2 [...] iwm0: hw rev 0x140, fw ver 17.352738.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ppc1: <Parallel port> port 0-0x7 irq 0 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Polled port [...] ppi0: <Parallel I/O> on ppbus0 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] VT: Replacing driver "efifb" with new "dummy". [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd200000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "dummy" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xe01e6000 vbase=0xfffff800e01e6000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] lo0: link state changed to UP [...] ubt0 on uhub2 [...] ubt0: <vendor 0x8087 product 0x07dc, class 224/1, rev 2.00/0.01, addr 3> on usbus1 [...] wmt0 on uhub2 [...] wmt0: <Atmel maXTouch Digitizer> on usbus1 [...] wmt0: Multitouch touchscreen with 0 external buttons [...] wmt0: 10 contacts and []. Report range [0:0] - [4095:4095] [...] uhid0 on uhub2 [...] uhid0: <Atmel maXTouch Control> on usbus1 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ubt0: ubt_ctrl_write_callback:906: control transfer failed: USB_ERR_TIMEOUT [...] ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] ugen0.3: <Kingston DataTraveler G2> at usbus0 [...] umass0 on uhub0 [...] umass0: <Kingston DataTraveler G2, class 0/0, rev 2.00/1.00, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Kingston DataTraveler G2 PMAP> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 3796MB (7774208 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.3: <Kingston DataTraveler G2> at usbus0 (disconnected) [...] umass0: at uhub0, port 2, addr 2 (disconnected) [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Kingston DataTraveler G2 PMAP> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.3: <Generic Mass Storage> at usbus0 [...] umass0 on uhub0 [...] umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.01, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4101 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Generic Flash Disk 8.07> Removable Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 7850MB (16076800 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.3: <Generic Mass Storage> at usbus0 (disconnected) [...] umass0: at uhub0, port 2, addr 3 (disconnected) [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Generic Flash Disk 8.07> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.3: <Generic Mass Storage> at usbus0 [...] umass0 on uhub0 [...] umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.01, addr 4> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4101 [...] umass0:2:0: Attached to scbus2 [...] ugen0.3: <Generic Mass Storage> at usbus0 (disconnected) [...] umass0: at uhub0, port 2, addr 4 (disconnected) [...] (da0:umass-sim0:0:0:0): got CAM status 0x50 [...] (da0:umass-sim0:0:0:0): fatal error, failed to attach to device [...] g_dev_taste: g_dev_taste(da0) failed to g_attach, error=6 [...] umass0: detached [...] ugen0.3: <USB Flash Disk> at usbus0 [...] umass0 on uhub0 [...] umass0: <USB Flash Disk, class 0/0, rev 2.00/11.00, addr 5> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <USB Flash Disk 1100> Fixed Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 1912MB (3915776 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.3: <USB Flash Disk> at usbus0 (disconnected) [...] umass0: at uhub0, port 2, addr 5 (disconnected) [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <USB Flash Disk 1100> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.3: <Kingston DataTraveler G2> at usbus0 [...] umass0 on uhub0 [...] umass0: <Kingston DataTraveler G2, class 0/0, rev 2.00/1.00, addr 6> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Kingston DataTraveler G2 PMAP> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 3796MB (7774208 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.3: <Kingston DataTraveler G2> at usbus0 (disconnected) [...] umass0: at uhub0, port 2, addr 6 (disconnected) [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Kingston DataTraveler G2 PMAP> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.3: <Kingston DataTraveler 3.0> at usbus0 [...] umass0 on uhub0 [...] umass0: <Kingston DataTraveler 3.0, class 0/0, rev 3.00/1.00, addr 7> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Kingston DataTraveler 3.0 PMAP> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 15000MB (30720000 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.3: <Kingston DataTraveler 3.0> at usbus0 (disconnected) [...] umass0: at uhub0, port 10, addr 7 (disconnected) [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Kingston DataTraveler 3.0 PMAP> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen1.4: <Atmel Atmel maXTouch Digitizer> at usbus1 (disconnected) [...] wmt0: at uhub2, port 8, addr 4 (disconnected) [...] wmt0: detached [...] uhid0: at uhub2, port 8, addr 4 (disconnected) [...] uhid0: detached [...] uhub1: at usbus1, port 1, addr 1 (disconnected) [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 (disconnected) [...] uhub2: at uhub1, port 1, addr 2 (disconnected) [...] ugen1.3: <vendor 0x8087 product 0x07dc> at usbus1 (disconnected) [...] ubt0: at uhub2, port 3, addr 3 (disconnected) [...] ubt0: detached [...] uhub2: detached [...] uhub1: detached [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <SunplusIT Inc LaptopIntegratedWebcamHD> at usbus0 (disconnected) [...] uhub0: detached [...] vgapci0: child drmn0 requested pci_set_powerstate [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] xhci0: Port routing mask set to 0xffffffff [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 13 ports with 13 removable, self powered [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.2: <SunplusIT Inc LaptopIntegratedWebcamHD> at usbus0 [...] uhub1: 3 ports with 3 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub2: 8 ports with 8 removable, self powered [...] ugen1.3: <vendor 0x8087 product 0x07dc> at usbus1 [...] ubt0 on uhub2 [...] ubt0: <vendor 0x8087 product 0x07dc, class 224/1, rev 2.00/0.01, addr 3> on usbus1 [...] ugen1.4: <Atmel Atmel maXTouch Digitizer> at usbus1 [...] wmt0 on uhub2 [...] wmt0: <Atmel maXTouch Digitizer> on usbus1 [...] wmt0: Multitouch touchscreen with 0 external buttons [...] wmt0: 10 contacts and []. Report range [0:0] - [4095:4095] [...] uhid0 on uhub2 [...] uhid0: <Atmel maXTouch Control> on usbus1 [...] ubt0: ubt_ctrl_write_callback:906: control transfer failed: USB_ERR_TIMEOUT [...] ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout [...] lo0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] uhub1: at usbus1, port 1, addr 1 (disconnected) [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 (disconnected) [...] uhub2: at uhub1, port 1, addr 2 (disconnected) [...] ugen1.3: <vendor 0x8087 product 0x07dc> at usbus1 (disconnected) [...] ubt0: at uhub2, port 3, addr 3 (disconnected) [...] ubt0: detached [...] ugen1.4: <Atmel Atmel maXTouch Digitizer> at usbus1 (disconnected) [...] wmt0: at uhub2, port 8, addr 4 (disconnected) [...] wmt0: detached [...] uhid0: at uhub2, port 8, addr 4 (disconnected) [...] uhid0: detached [...] uhub2: detached [...] uhub1: detached [...] wlan0: link state changed to DOWN [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <SunplusIT Inc LaptopIntegratedWebcamHD> at usbus0 (disconnected) [...] uhub0: detached [...] vgapci0: child drmn0 requested pci_set_powerstate [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] xhci0: Port routing mask set to 0xffffffff [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 13 ports with 13 removable, self powered [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.2: <SunplusIT Inc LaptopIntegratedWebcamHD> at usbus0 [...] uhub1: 3 ports with 3 removable, self powered [...] wlan0: link state changed to UP [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub2: 8 ports with 8 removable, self powered [...] ugen1.3: <vendor 0x8087 product 0x07dc> at usbus1 [...] ubt0 on uhub2 [...] ubt0: <vendor 0x8087 product 0x07dc, class 224/1, rev 2.00/0.01, addr 3> on usbus1 [...] ugen1.4: <Atmel Atmel maXTouch Digitizer> at usbus1 [...] wmt0 on uhub2 [...] wmt0: <Atmel maXTouch Digitizer> on usbus1 [...] wmt0: Multitouch touchscreen with 0 external buttons [...] wmt0: 10 contacts and []. Report range [0:0] - [4095:4095] [...] uhid0 on uhub2 [...] uhid0: <Atmel maXTouch Control> on usbus1 [...] ubt0: ubt_ctrl_write_callback:906: control transfer failed: USB_ERR_TIMEOUT [...] ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout [...] em0: link state changed to UP [...] ACPI Error: Index value 0x0000000000000083 overflows field width 0x7 (20201113/exfldio-477) [...] ACPI Error: Aborting method \134NEVT due to previous error (AE_AML_REGISTER_LIMIT) (20201113/psparse-689) [...] ACPI Error: Aborting method \134_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_REGISTER_LIMIT) (20201113/psparse-689) [...] acpi_ec0: evaluation of query method _Q66 failed: AE_AML_REGISTER_LIMIT [...] uhub1: at usbus1, port 1, addr 1 (disconnected) [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 (disconnected) [...] uhub2: at uhub1, port 1, addr 2 (disconnected) [...] ugen1.3: <vendor 0x8087 product 0x07dc> at usbus1 (disconnected) [...] ubt0: at uhub2, port 3, addr 3 (disconnected) [...] ubt0: detached [...] ugen1.4: <Atmel Atmel maXTouch Digitizer> at usbus1 (disconnected) [...] wmt0: at uhub2, port 8, addr 4 (disconnected) [...] wmt0: detached [...] uhid0: at uhub2, port 8, addr 4 (disconnected) [...] uhid0: detached [...] uhub2: detached [...] uhub1: detached [...] wlan0: link state changed to DOWN [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <SunplusIT Inc LaptopIntegratedWebcamHD> at usbus0 (disconnected) [...] uhub0: detached [...] vgapci0: child drmn0 requested pci_set_powerstate [...] i915 raw-wakerefs=3 wakelocks=3 on cleanup [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] drmn0: Failed to idle engines, declaring wedged! [...] xhci0: Port routing mask set to 0xffffffff [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] em0: link state changed to DOWN [...] uhub0: 13 ports with 13 removable, self powered [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.2: <SunplusIT Inc LaptopIntegratedWebcamHD> at usbus0 [...] ACPI Error: Index value 0x0000000000000083 overflows field width 0x7 (20201113/exfldio-477) [...] ACPI Error: Aborting method \134NEVT due to previous error (AE_AML_REGISTER_LIMIT) (20201113/psparse-689) [...] ACPI Error: Aborting method \134_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_REGISTER_LIMIT) (20201113/psparse-689) [...] acpi_ec0: evaluation of query method _Q66 failed: AE_AML_REGISTER_LIMIT [...] uhub1: 3 ports with 3 removable, self powered [...] em0: link state changed to UP [...] wlan0: link state changed to UP [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] pid 1086 (Xorg), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 35479 (kscreenlocker_greet), jid 0, uid 1001: exited on signal 6 [...] uhub2: 8 ports with 8 removable, self powered [...] ugen1.3: <vendor 0x8087 product 0x07dc> at usbus1 [...] ubt0 on uhub2 [...] ubt0: <vendor 0x8087 product 0x07dc, class 224/1, rev 2.00/0.01, addr 3> on usbus1 [...] ugen1.4: <Atmel Atmel maXTouch Digitizer> at usbus1 [...] wmt0 on uhub2 [...] wmt0: <Atmel maXTouch Digitizer> on usbus1 [...] wmt0: Multitouch touchscreen with 0 external buttons [...] wmt0: 10 contacts and []. Report range [0:0] - [4095:4095] [...] uhid0 on uhub2 [...] uhid0: <Atmel maXTouch Control> on usbus1 [...] pid 35600 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 35623 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 35599 (plasmashell), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 35624 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 35625 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 35626 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] ACPI Error: Index value 0x0000000000000083 overflows field width 0x7 (20201113/exfldio-477) [...] ACPI Error: Aborting method \134NEVT due to previous error (AE_AML_REGISTER_LIMIT) (20201113/psparse-689) [...] ACPI Error: Aborting method \134_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_REGISTER_LIMIT) (20201113/psparse-689) [...] acpi_ec0: evaluation of query method _Q66 failed: AE_AML_REGISTER_LIMIT [...] pid 35627 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 35628 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] ubt0: ubt_ctrl_write_callback:906: control transfer failed: USB_ERR_TIMEOUT [...] ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 17 17 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 2h32m33s [...] ubt0: detached [...] wmt0: detached [...] uhid0: detached [...] uhub2: detached [...] uhub1: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (2693.85-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8193028096 (7813 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 2 3 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x27> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7e34000-0xf7e37fff at device 3.0 on pci0 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point-LP HECI KT> port 0xf0e0-0xf0e7 mem 0xf7e3d000-0xf7e3dfff at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) I218-LM LPTLP> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e3c000-0xf7e3cfff at device 25.0 on pci0 [...] em0: EEPROM V0.6-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf7e30000-0xf7e33fff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7c01000-0xf7c01fff,0xf7c00000-0xf7c007ff at device 0.0 on pci3 [...] sdhci_pci0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. [...] sdhci_pci0: 1 slot(s) allocated [...] ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xf7e3b000-0xf7e3b3ff at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8M+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e3a000-0xf7e3a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1346881975 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC292 (Analog)> at nid 22 and 18 on hdaa1 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <SAMSUNG SSD PM851 mSATA 512GB EXT48D0Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] Trying to mount root from ufs:/dev/ada0p4 [rw]... [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7e39000-0xf7e390ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xf7d00000-0xf7d01fff at device 0.0 on pci2 [...] iwm0: hw rev 0x140, fw ver 17.352738.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ppc1: <Parallel port> port 0-0x7 irq 0 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Polled port [...] ppi0: <Parallel I/O> on ppbus0 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] VT: Replacing driver "efifb" with new "dummy". [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd200000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "dummy" with new "fb". [...] uhub0: 13 ports with 13 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] ugen0.2: <SunplusIT Inc LaptopIntegratedWebcamHD> at usbus0 [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xe01e6000 vbase=0xfffff800e01e6000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub2: 8 ports with 8 removable, self powered [...] usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) [...] wlan0: link state changed to UP [...] em0: link state changed to UP [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen1.3: <Atmel Atmel maXTouch Digitizer> at usbus1 [...] wmt0 on uhub2 [...] wmt0: <Atmel maXTouch Digitizer> on usbus1 [...] wmt0: Multitouch touchscreen with 0 external buttons [...] wmt0: 10 contacts and []. Report range [0:0] - [4095:4095] [...] uhid0 on uhub2 [...] uhid0: <Atmel maXTouch Control> on usbus1 [...] wlan0: link state changed to DOWN [...] pid 78850 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 0 0 done [...] All buffers synced. [...] Uptime: 8m13s [...] wmt0: detached [...] uhid0: detached [...] uhub2: detached [...] uhub1: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (2693.84-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8193028096 (7813 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 2 3 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x27> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7e34000-0xf7e37fff at device 3.0 on pci0 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point-LP HECI KT> port 0xf0e0-0xf0e7 mem 0xf7e3d000-0xf7e3dfff at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) I218-LM LPTLP> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e3c000-0xf7e3cfff at device 25.0 on pci0 [...] em0: EEPROM V0.6-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf7e30000-0xf7e33fff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7c01000-0xf7c01fff,0xf7c00000-0xf7c007ff at device 0.0 on pci3 [...] sdhci_pci0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. [...] sdhci_pci0: 1 slot(s) allocated [...] ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xf7e3b000-0xf7e3b3ff at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8M+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e3a000-0xf7e3a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1346882141 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC292 (Analog)> at nid 22 and 18 on hdaa1 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <SAMSUNG SSD PM851 mSATA 512GB EXT48D0Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from ufs:/dev/ada0p4 [rw]... [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] VT: Replacing driver "efifb" with new "dummy". [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd200000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "dummy" with new "fb". [...] uhub0: 13 ports with 13 removable, self powered [...] ugen0.2: <SunplusIT Inc LaptopIntegratedWebcamHD> at usbus0 [...] uhub1: 3 ports with 3 removable, self powered [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xe01e6000 vbase=0xfffff800e01e6000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7e39000-0xf7e390ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xf7d00000-0xf7d01fff at device 0.0 on pci2 [...] iwm0: hw rev 0x140, fw ver 17.352738.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ppc1: <Parallel port> port 0-0x7 irq 0 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Polled port [...] ppi0: <Parallel I/O> on ppbus0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub2: 8 ports with 8 removable, self powered [...] usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) [...] em0: link state changed to UP [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] wlan0: link state changed to UP [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen1.3: <Atmel Atmel maXTouch Digitizer> at usbus1 [...] wmt0 on uhub2 [...] wmt0: <Atmel maXTouch Digitizer> on usbus1 [...] wmt0: Multitouch touchscreen with 0 external buttons [...] wmt0: 10 contacts and []. Report range [0:0] - [4095:4095] [...] uhid0 on uhub2 [...] uhid0: <Atmel maXTouch Control> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 0 0 done [...] All buffers synced. [...] Uptime: 28m31s [...] wmt0: detached [...] uhid0: detached [...] uhub2: detached [...] uhub1: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (2693.85-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8193028096 (7813 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 2 3 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x27> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7e34000-0xf7e37fff at device 3.0 on pci0 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point-LP HECI KT> port 0xf0e0-0xf0e7 mem 0xf7e3d000-0xf7e3dfff at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) I218-LM LPTLP> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e3c000-0xf7e3cfff at device 25.0 on pci0 [...] em0: EEPROM V0.6-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf7e30000-0xf7e33fff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7c01000-0xf7c01fff,0xf7c00000-0xf7c007ff at device 0.0 on pci3 [...] sdhci_pci0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. [...] sdhci_pci0: 1 slot(s) allocated [...] ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xf7e3b000-0xf7e3b3ff at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8M+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e3a000-0xf7e3a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1346881901 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC292 (Analog)> at nid 22 and 18 on hdaa1 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <SAMSUNG SSD PM851 mSATA 512GB EXT48D0Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] Trying to mount root from ufs:/dev/ada0p4 [rw]... [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] VT: Replacing driver "efifb" with new "dummy". [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd200000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "dummy" with new "fb". [...] uhub0: 13 ports with 13 removable, self powered [...] ugen0.2: <SunplusIT Inc LaptopIntegratedWebcamHD> at usbus0 [...] uhub1: 3 ports with 3 removable, self powered [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xe01e6000 vbase=0xfffff800e01e6000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7e39000-0xf7e390ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xf7d00000-0xf7d01fff at device 0.0 on pci2 [...] iwm0: hw rev 0x140, fw ver 17.352738.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ppc1: <Parallel port> port 0-0x7 irq 0 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Polled port [...] ppi0: <Parallel I/O> on ppbus0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub2: 8 ports with 8 removable, self powered [...] usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) [...] em0: link state changed to UP [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] wlan0: link state changed to UP [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen1.3: <Atmel Atmel maXTouch Digitizer> at usbus1 [...] wmt0 on uhub2 [...] wmt0: <Atmel maXTouch Digitizer> on usbus1 [...] wmt0: Multitouch touchscreen with 0 external buttons [...] wmt0: 10 contacts and []. Report range [0:0] - [4095:4095] [...] uhid0 on uhub2 [...] uhid0: <Atmel maXTouch Control> on usbus1 [...] wlan0: link state changed to DOWN [...] pid 1739 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 10 0 0 done [...] All buffers synced. [...] Uptime: 17m33s [...] wmt0: detached [...] uhid0: detached [...] uhub2: detached [...] uhub1: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (2693.96-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8193028096 (7813 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 2 3 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x27> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7e34000-0xf7e37fff at device 3.0 on pci0 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point-LP HECI KT> port 0xf0e0-0xf0e7 mem 0xf7e3d000-0xf7e3dfff at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) I218-LM LPTLP> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e3c000-0xf7e3cfff at device 25.0 on pci0 [...] em0: EEPROM V0.6-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf7e30000-0xf7e33fff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7c01000-0xf7c01fff,0xf7c00000-0xf7c007ff at device 0.0 on pci3 [...] sdhci_pci0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. [...] sdhci_pci0: 1 slot(s) allocated [...] ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xf7e3b000-0xf7e3b3ff at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8M+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e3a000-0xf7e3a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1346881965 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] pcm2: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC292 (Analog)> at nid 22 and 18 on hdaa1 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <SAMSUNG SSD PM851 mSATA 512GB EXT48D0Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ada0: quirks=0x2<NCQ_TRIM_BROKEN> [...] Trying to mount root from ufs:/dev/ada0p4 [rw]... [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] VT: Replacing driver "efifb" with new "dummy". [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd200000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "dummy" with new "fb". [...] uhub0: 13 ports with 13 removable, self powered [...] ugen0.2: <SunplusIT Inc LaptopIntegratedWebcamHD> at usbus0 [...] uhub1: 3 ports with 3 removable, self powered [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xe01e6000 vbase=0xfffff800e01e6000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7e39000-0xf7e390ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xf7d00000-0xf7d01fff at device 0.0 on pci2 [...] iwm0: hw rev 0x140, fw ver 17.352738.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ppc1: <Parallel port> port 0-0x7 irq 0 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Polled port [...] ppi0: <Parallel I/O> on ppbus0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub2: 8 ports with 8 removable, self powered [...] usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) [...] em0: link state changed to UP [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] wlan0: link state changed to UP [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED