[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p3 stable/22.7-n250262-83840459d88 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (3192.91-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16504291328 (15739 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0480-0xf049e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7c20000-0xf7c2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) 82579LM> port 0xf080-0xf09f mem 0xf7c00000-0xf7c1ffff,0xf7c39000-0xf7c39fff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7c38000-0xf7c383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7c30000-0xf7c33fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> irq 16 at device 0.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7b04000-0xf7b04fff,0xf7b00000-0xf7b03fff irq 16 at device 0.0 on pci4 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <PCI-PCI bridge> irq 18 at device 2.0 on pci3 [...] pci5: <PCI bus> on pcib5 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7a04000-0xf7a04fff,0xf7a00000-0xf7a03fff irq 18 at device 0.0 on pci5 [...] re1: Using 1 MSI-X message [...] re1: turning off MSI enable bit. [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib6: <PCI-PCI bridge> irq 18 at device 6.0 on pci3 [...] pci6: <PCI bus> on pcib6 [...] re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xf7904000-0xf7904fff,0xf7900000-0xf7903fff irq 18 at device 0.0 on pci6 [...] re2: Using 1 MSI-X message [...] re2: turning off MSI enable bit. [...] re2: Chip rev. 0x54000000 [...] re2: MAC rev. 0x00100000 [...] miibus2: <MII bus> on re2 [...] rgephy2: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus2 [...] rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re2: Using defaults for TSO: 65518/35/2048 [...] re2: Ethernet address: ... [...] re2: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib7: <PCI-PCI bridge> irq 18 at device 14.0 on pci3 [...] pci7: <PCI bus> on pcib7 [...] re3: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xf7804000-0xf7804fff,0xf7800000-0xf7803fff irq 18 at device 0.0 on pci7 [...] re3: Using 1 MSI-X message [...] re3: turning off MSI enable bit. [...] re3: Chip rev. 0x54000000 [...] re3: MAC rev. 0x00100000 [...] miibus3: <MII bus> on re3 [...] rgephy3: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus3 [...] rgephy3: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re3: Using defaults for TSO: 65518/35/2048 [...] re3: Ethernet address: ... [...] re3: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7c37000-0xf7c373ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7c36000-0xf7c367ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce800-0xcf7ff,0xcf800-0xd07ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1596373608 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 27,33 and 25 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <KINGSTON SUV400S37120G 0C3FD6SD> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <PNY 120GB SATA SSD V0601B0> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 114473MB (234441648 512 byte sectors) [...] ses0: ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: pass2 in 'Slot 02', SATA Slot: scbus2 target 0 [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <PLDS DVD-ROM DS-8D3SH HD14> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub2: 8 ports with 8 removable, self powered [...] ugen0.2: <vendor 0x413c Dell KB216 Wired Keyboard> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus1 usbus2 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen1.3: <PixArt Dell MS116 USB Optical Mouse> at usbus1