[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i3-10100 CPU @ 3.60GHz (3600.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0653 Family=0x6 Model=0xa5 Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 68717379584 (65534 MB) [...] avail memory = 66686902272 (63597 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 5 7 6 4 2 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x8bbb7000-0x8bbb701e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I340 82580 (Copper)> port 0x3060-0x307f mem 0x8fa80000-0x8fafffff,0x8fb0c000-0x8fb0ffff at device 0.0 on pci1 [...] igb0: EEPROM V3.24-0 eTrack 0x80000228 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> port 0x3040-0x305f mem 0x8fa00000-0x8fa7ffff,0x8fb08000-0x8fb0bfff at device 0.1 on pci1 [...] igb1: EEPROM V3.24-0 eTrack 0x80000228 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> port 0x3020-0x303f mem 0x8f980000-0x8f9fffff,0x8fb04000-0x8fb07fff at device 0.2 on pci1 [...] igb2: EEPROM V3.24-0 eTrack 0x80000228 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> port 0x3000-0x301f mem 0x8f900000-0x8f97ffff,0x8fb00000-0x8fb03fff at device 0.3 on pci1 [...] igb3: EEPROM V3.24-0 eTrack 0x80000228 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001000000-0x600100ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4090-0x4097,0x4080-0x4083,0x4060-0x407f mem 0x8fe24000-0x8fe25fff,0x8fe27000-0x8fe270ff,0x8fe26000-0x8fe267ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 27.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] nvme0: <Generic NVMe Device> mem 0x8fd00000-0x8fd03fff at device 0.0 on pci4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] nvme1: <Generic NVMe Device> mem 0x8fc00000-0x8fc03fff at device 0.0 on pci6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] em0: <Intel(R) I219-V CMP(12)> mem 0x8fe00000-0x8fe1ffff at device 31.6 on pci0 [...] em0: EEPROM V0.2-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC-low" frequency 1799996149 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <KIOXIA-EXCERIA SSD> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] GEOM: nvd0: the primary GPT table is corrupt or invalid. [...] GEOM: nvd0: using the secondary instead -- recovery strongly advised. [...] nvd1: <KIOXIA-EXCERIA SSD> NVMe namespace [...] nvd1: 476940MB (976773168 512 byte sectors) [...] GEOM: nvd1: the primary GPT table is corrupt or invalid. [...] GEOM: nvd1: using the secondary instead -- recovery strongly advised. [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2BB080G4 D2012370> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 76319MB (156301488 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <INTEL SSDSC2BB080G4 D2012370> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 76319MB (156301488 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Root mount waiting for: usbus0 [...] uhub0: 24 ports with 24 removable, self powered [...] GEOM: nvd0: the primary GPT table is corrupt or invalid. [...] GEOM: nvd0: using the secondary instead -- recovery strongly advised. [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: accelerated software [...] GEOM_ELI: Device ada1p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: accelerated software [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] Got stolen memory base 0x0, size 0x0 [...] drmn0: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' [...] drmn0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20200917 for drmn0 on minor 0 [...] drmn0: [drm] Cannot find any crtc or sizes [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134ABAW.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: cannot find EC device [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134ACCE.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: cannot find EC device [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: cannot find EC device [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: cannot find EC device [...] lo0: link state changed to UP [...] drmn0: [drm] Cannot find any crtc or sizes [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lagg0: link state changed to UP [...] vlan100: link state changed to UP [...] vlan70: link state changed to UP [...] vlan101: link state changed to UP [...] vlan80: link state changed to UP [...] vlan10: link state changed to UP [...] vlan60: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] bridge0: Ethernet address: ... [...] bridge0: can't disable some capabilities on vlan60: 0x400 [...] bridge0: link state changed to UP [...] igb0: promiscuous mode enabled [...] igb1: promiscuous mode enabled [...] lagg0: promiscuous mode enabled [...] vlan60: promiscuous mode enabled [...] bridge0: changing name to 'vlan60bridge' [...] epair0a: Ethernet address: ... [...] epair0b: Ethernet address: ... [...] epair0a: link state changed to UP [...] epair0b: link state changed to UP [...] vlan60bridge: can't disable some capabilities on vlan60: 0x400 [...] epair0a: promiscuous mode enabled [...] epair0a: changing name to 'e0a_bastille3' [...] epair0b: changing name to 'e0b_bastille3' [...] e0b_bastille3: changing name to 'vnet0' [...] lo0: link state changed to UP [...] epair1a: Ethernet address: ... [...] epair1b: Ethernet address: ... [...] epair1a: link state changed to UP [...] epair1b: link state changed to UP [...] vlan60bridge: can't disable some capabilities on vlan60: 0x400 [...] epair1a: promiscuous mode enabled [...] epair1a: changing name to 'e0a_bastille6' [...] epair1b: changing name to 'e0b_bastille6' [...] e0b_bastille6: changing name to 'vnet0' [...] lo0: link state changed to UP [...] bridge1: Ethernet address: ... [...] bridge1: can't disable some capabilities on vlan70: 0x400 [...] vlan70: promiscuous mode enabled [...] bridge1: link state changed to UP [...] bridge1: changing name to 'vlan70bridge' [...] epair2a: Ethernet address: ... [...] epair2b: Ethernet address: ... [...] epair2a: link state changed to UP [...] epair2b: link state changed to UP [...] vlan70bridge: can't disable some capabilities on vlan70: 0x400 [...] epair2a: promiscuous mode enabled [...] epair2a: changing name to 'e0a_bastille2' [...] epair2b: changing name to 'e0b_bastille2' [...] e0b_bastille2: changing name to 'vnet0' [...] lo0: link state changed to UP [...] epair3a: Ethernet address: ... [...] epair3b: Ethernet address: ... [...] epair3a: link state changed to UP [...] epair3b: link state changed to UP [...] vlan70bridge: can't disable some capabilities on vlan70: 0x400 [...] epair3a: promiscuous mode enabled [...] epair3a: changing name to 'e0a_bastille9' [...] epair3b: changing name to 'e0b_bastille9' [...] e0b_bastille9: changing name to 'vnet0' [...] lo0: link state changed to UP [...] epair4a: Ethernet address: ... [...] epair4b: Ethernet address: ... [...] epair4a: link state changed to UP [...] epair4b: link state changed to UP [...] vlan60bridge: can't disable some capabilities on vlan60: 0x400 [...] epair4a: promiscuous mode enabled [...] epair4a: changing name to 'e0a_bastille0' [...] epair4b: changing name to 'e0b_bastille0' [...] e0b_bastille0: changing name to 'vnet0' [...] lo0: link state changed to UP [...] epair5a: Ethernet address: ... [...] epair5b: Ethernet address: ... [...] epair5a: link state changed to UP [...] epair5b: link state changed to UP [...] vlan70bridge: can't disable some capabilities on vlan70: 0x400 [...] epair5a: promiscuous mode enabled [...] epair5a: changing name to 'e0a_bastille7' [...] epair5b: changing name to 'e0b_bastille7' [...] e0b_bastille7: changing name to 'vnet0' [...] lo0: link state changed to UP [...] epair6a: Ethernet address: ... [...] epair6b: Ethernet address: ... [...] epair6a: link state changed to UP [...] epair6b: link state changed to UP [...] vlan70bridge: can't disable some capabilities on vlan70: 0x400 [...] epair6a: promiscuous mode enabled [...] epair6a: changing name to 'e0a_bastille8' [...] epair6b: changing name to 'e0b_bastille8' [...] e0b_bastille8: changing name to 'vnet0' [...] lo0: link state changed to UP [...] bridge2: Ethernet address: ... [...] bridge2: can't disable some capabilities on vlan100: 0x400 [...] vlan100: promiscuous mode enabled [...] bridge2: link state changed to UP [...] bridge2: changing name to 'vlan100bridge' [...] epair7a: Ethernet address: ... [...] epair7b: Ethernet address: ... [...] epair7a: link state changed to UP [...] epair7b: link state changed to UP [...] vlan100bridge: can't disable some capabilities on vlan100: 0x400 [...] epair7a: promiscuous mode enabled [...] epair7a: changing name to 'e0a_bastille11' [...] epair7b: changing name to 'e0b_bastille11' [...] e0b_bastille11: changing name to 'vnet0' [...] lo0: link state changed to UP [...] Limiting closed port RST response from 203 to 190 packets/sec [...] Limiting closed port RST response from 205 to 196 packets/sec [...] bridge3: Ethernet address: ... [...] bridge3: can't disable some capabilities on vlan101: 0x400 [...] vlan101: promiscuous mode enabled [...] bridge3: link state changed to UP [...] bridge3: changing name to 'vlan101bridge' [...] epair8a: Ethernet address: ... [...] epair8b: Ethernet address: ... [...] epair8a: link state changed to UP [...] epair8b: link state changed to UP [...] vlan101bridge: can't disable some capabilities on vlan101: 0x400 [...] epair8a: promiscuous mode enabled [...] epair8a: changing name to 'e0a_bastille12' [...] epair8b: changing name to 'e0b_bastille12' [...] e0b_bastille12: changing name to 'vnet0' [...] lo0: link state changed to UP [...] epair9a: Ethernet address: ... [...] epair9b: Ethernet address: ... [...] epair9a: link state changed to UP [...] epair9b: link state changed to UP [...] vlan70bridge: can't disable some capabilities on vlan70: 0x400 [...] epair9a: promiscuous mode enabled [...] epair9a: changing name to 'e0a_bastille10' [...] epair9b: changing name to 'e0b_bastille10' [...] e0b_bastille10: changing name to 'vnet0' [...] lo0: link state changed to UP [...] epair10a: Ethernet address: ... [...] epair10b: Ethernet address: ... [...] epair10a: link state changed to UP [...] epair10b: link state changed to UP [...] vlan60bridge: can't disable some capabilities on vlan60: 0x400 [...] epair10a: promiscuous mode enabled [...] epair10a: changing name to 'e0a_bastille1' [...] epair10b: changing name to 'e0b_bastille1' [...] e0b_bastille1: changing name to 'vnet0' [...] lo0: link state changed to UP [...] bridge4: Ethernet address: ... [...] bridge4: can't disable some capabilities on vlan10: 0x400 [...] vlan10: promiscuous mode enabled [...] bridge4: link state changed to UP [...] bridge4: changing name to 'vlan10bridge' [...] epair11a: Ethernet address: ... [...] epair11b: Ethernet address: ... [...] epair11a: link state changed to UP [...] epair11b: link state changed to UP [...] vlan10bridge: can't disable some capabilities on vlan10: 0x400 [...] epair11a: promiscuous mode enabled [...] epair11a: changing name to 'e0a_bastille5' [...] epair11b: changing name to 'e0b_bastille5' [...] e0b_bastille5: changing name to 'vnet0' [...] lo0: link state changed to UP [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=768 width=1024 depth=32 [...] pbase=0x4000040000 vbase=0xfffffe019d440000 [...] name=drmn0 flags=0x0 stride=4096 bpp=32 [...] end FB_INFO [...] ugen0.2: <Kb KVM -COMPOSITE> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Kb> on usbus0 [...] kbd2 at ukbd0 [...] uhid0 on uhub0 [...] uhid0: <Kb> on usbus0 [...] ums0 on uhub0 [...] ums0: <Kb KVM -COMPOSITE, class 0/0, rev 1.10/1.00, addr 1> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] Limiting closed port RST response from 589 to 190 packets/sec [...] Limiting closed port RST response from 786 to 215 packets/sec [...] Limiting closed port RST response from 373 to 192 packets/sec [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 0 0 0 done [...] All buffers synced. [...] GEOM_ELI: Device ada0p3.eli destroyed. [...] GEOM_ELI: Detached ada0p3.eli on last close. [...] GEOM_ELI: Device ada1p3.eli destroyed. [...] GEOM_ELI: Detached ada1p3.eli on last close. [...] Uptime: 34m11s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i3-10100 CPU @ 3.60GHz (3600.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0653 Family=0x6 Model=0xa5 Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 68717379584 (65534 MB) [...] avail memory = 66686906368 (63597 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 7 3 5 4 2 6 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x8bbb7000-0x8bbb701e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I340 82580 (Copper)> port 0x3060-0x307f mem 0x8fa80000-0x8fafffff,0x8fb0c000-0x8fb0ffff at device 0.0 on pci1 [...] igb0: EEPROM V3.24-0 eTrack 0x80000228 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> port 0x3040-0x305f mem 0x8fa00000-0x8fa7ffff,0x8fb08000-0x8fb0bfff at device 0.1 on pci1 [...] igb1: EEPROM V3.24-0 eTrack 0x80000228 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> port 0x3020-0x303f mem 0x8f980000-0x8f9fffff,0x8fb04000-0x8fb07fff at device 0.2 on pci1 [...] igb2: EEPROM V3.24-0 eTrack 0x80000228 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> port 0x3000-0x301f mem 0x8f900000-0x8f97ffff,0x8fb00000-0x8fb03fff at device 0.3 on pci1 [...] igb3: EEPROM V3.24-0 eTrack 0x80000228 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001000000-0x600100ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4090-0x4097,0x4080-0x4083,0x4060-0x407f mem 0x8fe24000-0x8fe25fff,0x8fe27000-0x8fe270ff,0x8fe26000-0x8fe267ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 27.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] nvme0: <Generic NVMe Device> mem 0x8fd00000-0x8fd03fff at device 0.0 on pci4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] nvme1: <Generic NVMe Device> mem 0x8fc00000-0x8fc03fff at device 0.0 on pci6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] em0: <Intel(R) I219-V CMP(12)> mem 0x8fe00000-0x8fe1ffff at device 31.6 on pci0 [...] em0: EEPROM V0.2-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC-low" frequency 1799996215 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <KIOXIA-EXCERIA SSD> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] GEOM: nvd0: the primary GPT table is corrupt or invalid. [...] GEOM: nvd0: using the secondary instead -- recovery strongly advised. [...] nvd1: <KIOXIA-EXCERIA SSD> NVMe namespace [...] nvd1: 476940MB (976773168 512 byte sectors) [...] GEOM: nvd1: the primary GPT table is corrupt or invalid. [...] GEOM: nvd1: using the secondary instead -- recovery strongly advised. [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2BB080G4 D2012370> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 76319MB (156301488 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <INTEL SSDSC2BB080G4 D2012370> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 76319MB (156301488 512 byte sectors) [...] ses0: ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Root mount waiting for: usbus0 [...] uhub0: 24 ports with 24 removable, self powered [...] ugen0.2: <Kb KVM -COMPOSITE> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Kb> on usbus0 [...] kbd2 at ukbd0 [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: accelerated software [...] GEOM_ELI: Device ada1p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: accelerated software [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] Got stolen memory base 0x0, size 0x0 [...] drmn0: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' [...] drmn0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20200917 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=768 width=1024 depth=32 [...] pbase=0x4000040000 vbase=0xfffffe019d640000 [...] name=drmn0 flags=0x0 stride=4096 bpp=32 [...] end FB_INFO [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134ABAW.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: cannot find EC device [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134ACCE.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: cannot find EC device [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: cannot find EC device [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: cannot find EC device [...] lo0: link state changed to UP [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] uhid0 on uhub0 [...] uhid0: <Kb> on usbus0 [...] ums0 on uhub0 [...] ums0: <Kb KVM -COMPOSITE, class 0/0, rev 1.10/1.00, addr 1> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] lagg0: link state changed to UP [...] vlan100: link state changed to UP [...] vlan70: link state changed to UP [...] vlan101: link state changed to UP [...] vlan80: link state changed to UP [...] vlan10: link state changed to UP [...] vlan60: link state changed to UP