[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a8 Family=0x6 Model=0x7a Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8071876608 (7697 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 19 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1910000-0xa1913fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1914000-0xa1915fff,0xa1918000-0xa19180ff,0xa1917000-0xa19177ff irq 19 at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 21 at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xa1700000-0xa17fffff,0xa1800000-0xa1803fff irq 22 at device 0.0 on pci1 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 21 at device 19.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xa1500000-0xa15fffff,0xa1600000-0xa1603fff irq 23 at device 0.0 on pci2 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 21 at device 19.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc2: <Intel(R) Ethernet Controller I225-V> mem 0xa1300000-0xa13fffff,0xa1400000-0xa1403fff irq 20 at device 0.0 on pci3 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 21 at device 19.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc3: <Intel(R) Ethernet Controller I225-V> mem 0xa1100000-0xa11fffff,0xa1200000-0xa1203fff irq 21 at device 0.0 on pci4 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 22 at device 20.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 22 at device 20.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1900000-0xa190ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1996801145 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <Micron 1100 MTFDDAV256TBN M0MA020> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Logitech Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech Logitech USB Keyboard, class 0/0, rev 1.10/28.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] igc1: link state changed to UP [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1916000-0xa19160ff irq 20 at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igc1: link state changed to DOWN [...] igc1: link state changed to UP [...] igc0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igc0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igc0 [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] pid 73578 (sh), jid 0, uid 0: exited on signal 10 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 7m20s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255007-1d6e165fb40 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a8 Family=0x6 Model=0x7a Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8071872512 (7697 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 19 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1910000-0xa1913fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1914000-0xa1915fff,0xa1918000-0xa19180ff,0xa1917000-0xa19177ff irq 19 at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 21 at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xa1700000-0xa17fffff,0xa1800000-0xa1803fff irq 22 at device 0.0 on pci1 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 21 at device 19.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xa1500000-0xa15fffff,0xa1600000-0xa1603fff irq 23 at device 0.0 on pci2 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 21 at device 19.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc2: <Intel(R) Ethernet Controller I225-V> mem 0xa1300000-0xa13fffff,0xa1400000-0xa1403fff irq 20 at device 0.0 on pci3 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 21 at device 19.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc3: <Intel(R) Ethernet Controller I225-V> mem 0xa1100000-0xa11fffff,0xa1200000-0xa1203fff irq 21 at device 0.0 on pci4 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 22 at device 20.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 22 at device 20.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1900000-0xa190ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1996801535 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <Micron 1100 MTFDDAV256TBN M0MA020> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Logitech Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech Logitech USB Keyboard, class 0/0, rev 1.10/28.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1916000-0xa19160ff irq 20 at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igc0: link state changed to DOWN [...] igc1: link state changed to DOWN [...] igc1: link state changed to UP [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 40m0s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255007-1d6e165fb40 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a8 Family=0x6 Model=0x7a Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8071876608 (7697 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 19 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1910000-0xa1913fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1914000-0xa1915fff,0xa1918000-0xa19180ff,0xa1917000-0xa19177ff irq 19 at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 21 at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xa1700000-0xa17fffff,0xa1800000-0xa1803fff irq 22 at device 0.0 on pci1 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 21 at device 19.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xa1500000-0xa15fffff,0xa1600000-0xa1603fff irq 23 at device 0.0 on pci2 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 21 at device 19.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc2: <Intel(R) Ethernet Controller I225-V> mem 0xa1300000-0xa13fffff,0xa1400000-0xa1403fff irq 20 at device 0.0 on pci3 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 21 at device 19.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc3: <Intel(R) Ethernet Controller I225-V> mem 0xa1100000-0xa11fffff,0xa1200000-0xa1203fff irq 21 at device 0.0 on pci4 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 22 at device 20.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 22 at device 20.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1900000-0xa190ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1996800771 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <Micron 1100 MTFDDAV256TBN M0MA020> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Logitech Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech Logitech USB Keyboard, class 0/0, rev 1.10/28.00, addr 1> on usbus0 [...] kbd2 at ukbd0