[...] igb8: Using 4 RX queues 4 TX queues [...] igb8: Using MSI-X interrupts with 5 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb9: <Intel(R) I350 (Fiber)> port 0x8000-0x801f mem 0xf7700000-0xf771ffff,0xf7740000-0xf7743fff at device 0.1 on pci13 [...] igb9: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 4 RX queues 4 TX queues [...] igb9: Using MSI-X interrupts with 5 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f17000-0xf7f173ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f16000-0xf7f167ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (38400,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1596303541 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <CT480BX500SSD1 M6CR056> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 457862MB (937703088 512 byte sectors) [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] uhub3: 8 ports with 8 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7f15000-0xf7f150ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ix0: link state changed to UP [...] ix3: link state changed to UP [...] ix1: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on ix3 [...] pid 24130 (syslog-ng), jid 0, uid 0: exited on signal 6 (no core dump - bad address) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE stable/24.7-n267717-cf61c67cb34 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.77-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16519004160 (15753 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xdbba0698-0xdbba06b6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <PCI-PCI bridge> mem 0xf7600000-0xf761ffff at device 0.0 on pci1 [...] pci2: <PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> at device 4.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 5.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7520000-0xf753ffff,0xf7544000-0xf7547fff at device 0.0 on pci4 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x800000cb PHY FW V65535 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7500000-0xf751ffff,0xf7540000-0xf7543fff at device 0.1 on pci4 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x800000cb PHY FW V65535 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib5: <PCI-PCI bridge> at device 8.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] ix2: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7420000-0xf743ffff,0xf7444000-0xf7447fff at device 0.0 on pci5 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 4 RX queues 4 TX queues [...] ix2: Using MSI-X interrupts with 5 vectors [...] ix2: allocated for 4 queues [...] ix2: allocated for 4 rx queues [...] ix2: Ethernet address: ... [...] ix2: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix2: eTrack 0x800000cb PHY FW V65535 [...] ix2: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix3: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7400000-0xf741ffff,0xf7440000-0xf7443fff at device 0.1 on pci5 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 4 RX queues 4 TX queues [...] ix3: Using MSI-X interrupts with 5 vectors [...] ix3: allocated for 4 queues [...] ix3: allocated for 4 rx queues [...] ix3: Ethernet address: ... [...] ix3: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix3: eTrack 0x800000cb PHY FW V65535 [...] ix3: netmap queues/slots: TX 4/2048, RX 4/2048 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f10000-0xf7f13fff at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f18000-0xf7f183ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb0: <Intel(R) I210 (Copper)> port 0xe000-0xe01f mem 0xf7e00000-0xf7e7ffff,0xf7e80000-0xf7e83fff at device 0.0 on pci6 [...] igb0: EEPROM V3.20-0 eTrack 0x80000550 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb1: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0xf7d00000-0xf7d7ffff,0xf7d80000-0xf7d83fff at device 0.0 on pci7 [...] igb1: EEPROM V3.20-0 eTrack 0x80000550 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb2: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xf7c00000-0xf7c7ffff,0xf7c80000-0xf7c83fff at device 0.0 on pci8 [...] igb2: EEPROM V3.20-0 eTrack 0x80000550 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib9: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb3: <Intel(R) I210 (Copper)> port 0xb000-0xb01f mem 0xf7b00000-0xf7b7ffff,0xf7b80000-0xf7b83fff at device 0.0 on pci9 [...] igb3: EEPROM V3.20-0 eTrack 0x80000550 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib10: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] igb4: <Intel(R) I210 (Copper)> port 0xa000-0xa01f mem 0xf7a00000-0xf7a7ffff,0xf7a80000-0xf7a83fff at device 0.0 on pci10 [...] igb4: EEPROM V3.20-0 eTrack 0x80000550 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib11: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] igb5: <Intel(R) I210 (Copper)> port 0x9000-0x901f mem 0xf7900000-0xf797ffff,0xf7980000-0xf7983fff at device 0.0 on pci11 [...] igb5: EEPROM V3.20-0 eTrack 0x80000550 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 4 RX queues 4 TX queues [...] igb5: Using MSI-X interrupts with 5 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib12: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] igb6: <Intel(R) I350 (Copper)> mem 0xf7820000-0xf783ffff,0xf7844000-0xf7847fff at device 0.0 on pci12 [...] igb6: EEPROM V1.63-0 eTrack 0x800009fb [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 4 RX queues 4 TX queues [...] igb6: Using MSI-X interrupts with 5 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb7: <Intel(R) I350 (Copper)> mem 0xf7800000-0xf781ffff,0xf7840000-0xf7843fff at device 0.1 on pci12 [...] igb7: EEPROM V1.63-0 eTrack 0x800009fb [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 4 RX queues 4 TX queues [...] igb7: Using MSI-X interrupts with 5 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib13: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] igb8: <Intel(R) I350 (Fiber)> port 0x8020-0x803f mem 0xf7720000-0xf773ffff,0xf7744000-0xf7747fff at device 0.0 on pci13 [...] igb8: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 4 RX queues 4 TX queues [...] igb8: Using MSI-X interrupts with 5 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb9: <Intel(R) I350 (Fiber)> port 0x8000-0x801f mem 0xf7700000-0xf771ffff,0xf7740000-0xf7743fff at device 0.1 on pci13 [...] igb9: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 4 RX queues 4 TX queues [...] igb9: Using MSI-X interrupts with 5 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f17000-0xf7f173ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f16000-0xf7f167ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (38400,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1596303963 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus2 [...] uhub1 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <CT480BX500SSD1 M6CR056> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 457862MB (937703088 512 byte sectors) [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for:uhub1: 21 ports with 21 removable, self powered [...] usbus0 usbus1 usbus2 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] uhub3: 8 ports with 8 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7f15000-0xf7f150ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ix0: link state changed to UP [...] ix3: link state changed to UP [...] ix1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 4 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE stable/24.7-n267717-cf61c67cb34 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.78-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16519004160 (15753 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xdbba0698-0xdbba06b6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <PCI-PCI bridge> mem 0xf7600000-0xf761ffff at device 0.0 on pci1 [...] pci2: <PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> at device 4.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 5.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7520000-0xf753ffff,0xf7544000-0xf7547fff at device 0.0 on pci4 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x800000cb PHY FW V65535 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7500000-0xf751ffff,0xf7540000-0xf7543fff at device 0.1 on pci4 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x800000cb PHY FW V65535 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib5: <PCI-PCI bridge> at device 8.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] ix2: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7420000-0xf743ffff,0xf7444000-0xf7447fff at device 0.0 on pci5 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 4 RX queues 4 TX queues [...] ix2: Using MSI-X interrupts with 5 vectors [...] ix2: allocated for 4 queues [...] ix2: allocated for 4 rx queues [...] ix2: Ethernet address: ... [...] ix2: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix2: eTrack 0x800000cb PHY FW V65535 [...] ix2: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix3: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7400000-0xf741ffff,0xf7440000-0xf7443fff at device 0.1 on pci5 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 4 RX queues 4 TX queues [...] ix3: Using MSI-X interrupts with 5 vectors [...] ix3: allocated for 4 queues [...] ix3: allocated for 4 rx queues [...] ix3: Ethernet address: ... [...] ix3: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix3: eTrack 0x800000cb PHY FW V65535 [...] ix3: netmap queues/slots: TX 4/2048, RX 4/2048 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f10000-0xf7f13fff at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f18000-0xf7f183ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb0: <Intel(R) I210 (Copper)> port 0xe000-0xe01f mem 0xf7e00000-0xf7e7ffff,0xf7e80000-0xf7e83fff at device 0.0 on pci6 [...] igb0: EEPROM V3.20-0 eTrack 0x80000550 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb1: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0xf7d00000-0xf7d7ffff,0xf7d80000-0xf7d83fff at device 0.0 on pci7 [...] igb1: EEPROM V3.20-0 eTrack 0x80000550 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb2: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xf7c00000-0xf7c7ffff,0xf7c80000-0xf7c83fff at device 0.0 on pci8 [...] igb2: EEPROM V3.20-0 eTrack 0x80000550 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib9: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb3: <Intel(R) I210 (Copper)> port 0xb000-0xb01f mem 0xf7b00000-0xf7b7ffff,0xf7b80000-0xf7b83fff at device 0.0 on pci9 [...] igb3: EEPROM V3.20-0 eTrack 0x80000550 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib10: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] igb4: <Intel(R) I210 (Copper)> port 0xa000-0xa01f mem 0xf7a00000-0xf7a7ffff,0xf7a80000-0xf7a83fff at device 0.0 on pci10 [...] igb4: EEPROM V3.20-0 eTrack 0x80000550 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib11: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] igb5: <Intel(R) I210 (Copper)> port 0x9000-0x901f mem 0xf7900000-0xf797ffff,0xf7980000-0xf7983fff at device 0.0 on pci11 [...] igb5: EEPROM V3.20-0 eTrack 0x80000550 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 4 RX queues 4 TX queues [...] igb5: Using MSI-X interrupts with 5 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib12: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] igb6: <Intel(R) I350 (Copper)> mem 0xf7820000-0xf783ffff,0xf7844000-0xf7847fff at device 0.0 on pci12 [...] igb6: EEPROM V1.63-0 eTrack 0x800009fb [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 4 RX queues 4 TX queues [...] igb6: Using MSI-X interrupts with 5 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb7: <Intel(R) I350 (Copper)> mem 0xf7800000-0xf781ffff,0xf7840000-0xf7843fff at device 0.1 on pci12 [...] igb7: EEPROM V1.63-0 eTrack 0x800009fb [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 4 RX queues 4 TX queues [...] igb7: Using MSI-X interrupts with 5 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib13: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] igb8: <Intel(R) I350 (Fiber)> port 0x8020-0x803f mem 0xf7720000-0xf773ffff,0xf7744000-0xf7747fff at device 0.0 on pci13 [...] igb8: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 4 RX queues 4 TX queues [...] igb8: Using MSI-X interrupts with 5 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb9: <Intel(R) I350 (Fiber)> port 0x8000-0x801f mem 0xf7700000-0xf771ffff,0xf7740000-0xf7743fff at device 0.1 on pci13 [...] igb9: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 4 RX queues 4 TX queues [...] igb9: Using MSI-X interrupts with 5 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f17000-0xf7f173ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f16000-0xf7f167ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (38400,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1596303666 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <CT480BX500SSD1 M6CR056> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 457862MB (937703088 512 byte sectors) [...] on usbus0 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7f15000-0xf7f150ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix3: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE stable/24.7-n267717-cf61c67cb34 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.70-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16519004160 (15753 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xdbba0698-0xdbba06b6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <PCI-PCI bridge> mem 0xf7600000-0xf761ffff at device 0.0 on pci1 [...] pci2: <PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> at device 4.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 5.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7520000-0xf753ffff,0xf7544000-0xf7547fff at device 0.0 on pci4 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x800000cb PHY FW V65535 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7500000-0xf751ffff,0xf7540000-0xf7543fff at device 0.1 on pci4 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x800000cb PHY FW V65535 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib5: <PCI-PCI bridge> at device 8.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] ix2: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7420000-0xf743ffff,0xf7444000-0xf7447fff at device 0.0 on pci5 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 4 RX queues 4 TX queues [...] ix2: Using MSI-X interrupts with 5 vectors [...] ix2: allocated for 4 queues [...] ix2: allocated for 4 rx queues [...] ix2: Ethernet address: ... [...] ix2: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix2: eTrack 0x800000cb PHY FW V65535 [...] ix2: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix3: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7400000-0xf741ffff,0xf7440000-0xf7443fff at device 0.1 on pci5 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 4 RX queues 4 TX queues [...] ix3: Using MSI-X interrupts with 5 vectors [...] ix3: allocated for 4 queues [...] ix3: allocated for 4 rx queues [...] ix3: Ethernet address: ... [...] ix3: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix3: eTrack 0x800000cb PHY FW V65535 [...] ix3: netmap queues/slots: TX 4/2048, RX 4/2048 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f10000-0xf7f13fff at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f18000-0xf7f183ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb0: <Intel(R) I210 (Copper)> port 0xe000-0xe01f mem 0xf7e00000-0xf7e7ffff,0xf7e80000-0xf7e83fff at device 0.0 on pci6 [...] igb0: EEPROM V3.20-0 eTrack 0x80000550 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb1: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0xf7d00000-0xf7d7ffff,0xf7d80000-0xf7d83fff at device 0.0 on pci7 [...] igb1: EEPROM V3.20-0 eTrack 0x80000550 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb2: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xf7c00000-0xf7c7ffff,0xf7c80000-0xf7c83fff at device 0.0 on pci8 [...] igb2: EEPROM V3.20-0 eTrack 0x80000550 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib9: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb3: <Intel(R) I210 (Copper)> port 0xb000-0xb01f mem 0xf7b00000-0xf7b7ffff,0xf7b80000-0xf7b83fff at device 0.0 on pci9 [...] igb3: EEPROM V3.20-0 eTrack 0x80000550 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib10: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] igb4: <Intel(R) I210 (Copper)> port 0xa000-0xa01f mem 0xf7a00000-0xf7a7ffff,0xf7a80000-0xf7a83fff at device 0.0 on pci10 [...] igb4: EEPROM V3.20-0 eTrack 0x80000550 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib11: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] igb5: <Intel(R) I210 (Copper)> port 0x9000-0x901f mem 0xf7900000-0xf797ffff,0xf7980000-0xf7983fff at device 0.0 on pci11 [...] igb5: EEPROM V3.20-0 eTrack 0x80000550 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 4 RX queues 4 TX queues [...] igb5: Using MSI-X interrupts with 5 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib12: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] igb6: <Intel(R) I350 (Copper)> mem 0xf7820000-0xf783ffff,0xf7844000-0xf7847fff at device 0.0 on pci12 [...] igb6: EEPROM V1.63-0 eTrack 0x800009fb [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 4 RX queues 4 TX queues [...] igb6: Using MSI-X interrupts with 5 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb7: <Intel(R) I350 (Copper)> mem 0xf7800000-0xf781ffff,0xf7840000-0xf7843fff at device 0.1 on pci12 [...] igb7: EEPROM V1.63-0 eTrack 0x800009fb [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 4 RX queues 4 TX queues [...] igb7: Using MSI-X interrupts with 5 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib13: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] igb8: <Intel(R) I350 (Fiber)> port 0x8020-0x803f mem 0xf7720000-0xf773ffff,0xf7744000-0xf7747fff at device 0.0 on pci13 [...] igb8: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 4 RX queues 4 TX queues [...] igb8: Using MSI-X interrupts with 5 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb9: <Intel(R) I350 (Fiber)> port 0x8000-0x801f mem 0xf7700000-0xf771ffff,0xf7740000-0xf7743fff at device 0.1 on pci13 [...] igb9: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 4 RX queues 4 TX queues [...] igb9: Using MSI-X interrupts with 5 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f17000-0xf7f173ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f16000-0xf7f167ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (38400,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1596303667 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <CT480BX500SSD1 M6CR056> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 457862MB (937703088 512 byte sectors) [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7f15000-0xf7f150ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ix0: link state changed to UP [...] ix3: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] ix0: link state changed to UP [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] ix0: link state changed to DOWN [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] ix0: link state changed to UP [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] pid 4685 (syslog-ng), jid 0, uid 0: exited on signal 6 (no core dump - bad address) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 5 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE stable/24.7-n267717-cf61c67cb34 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.77-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16519004160 (15753 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xdbba0698-0xdbba06b6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <PCI-PCI bridge> mem 0xf7600000-0xf761ffff at device 0.0 on pci1 [...] pci2: <PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> at device 4.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 5.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7520000-0xf753ffff,0xf7544000-0xf7547fff at device 0.0 on pci4 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x800000cb PHY FW V65535 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7500000-0xf751ffff,0xf7540000-0xf7543fff at device 0.1 on pci4 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x800000cb PHY FW V65535 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib5: <PCI-PCI bridge> at device 8.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] ix2: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7420000-0xf743ffff,0xf7444000-0xf7447fff at device 0.0 on pci5 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 4 RX queues 4 TX queues [...] ix2: Using MSI-X interrupts with 5 vectors [...] ix2: allocated for 4 queues [...] ix2: allocated for 4 rx queues [...] ix2: Ethernet address: ... [...] ix2: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix2: eTrack 0x800000cb PHY FW V65535 [...] ix2: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix3: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xf7400000-0xf741ffff,0xf7440000-0xf7443fff at device 0.1 on pci5 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 4 RX queues 4 TX queues [...] ix3: Using MSI-X interrupts with 5 vectors [...] ix3: allocated for 4 queues [...] ix3: allocated for 4 rx queues [...] ix3: Ethernet address: ... [...] ix3: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix3: eTrack 0x800000cb PHY FW V65535 [...] ix3: netmap queues/slots: TX 4/2048, RX 4/2048 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f10000-0xf7f13fff at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f18000-0xf7f183ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb0: <Intel(R) I210 (Copper)> port 0xe000-0xe01f mem 0xf7e00000-0xf7e7ffff,0xf7e80000-0xf7e83fff at device 0.0 on pci6 [...] igb0: EEPROM V3.20-0 eTrack 0x80000550 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb1: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0xf7d00000-0xf7d7ffff,0xf7d80000-0xf7d83fff at device 0.0 on pci7 [...] igb1: EEPROM V3.20-0 eTrack 0x80000550 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb2: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xf7c00000-0xf7c7ffff,0xf7c80000-0xf7c83fff at device 0.0 on pci8 [...] igb2: EEPROM V3.20-0 eTrack 0x80000550 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib9: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb3: <Intel(R) I210 (Copper)> port 0xb000-0xb01f mem 0xf7b00000-0xf7b7ffff,0xf7b80000-0xf7b83fff at device 0.0 on pci9 [...] igb3: EEPROM V3.20-0 eTrack 0x80000550 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib10: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] igb4: <Intel(R) I210 (Copper)> port 0xa000-0xa01f mem 0xf7a00000-0xf7a7ffff,0xf7a80000-0xf7a83fff at device 0.0 on pci10 [...] igb4: EEPROM V3.20-0 eTrack 0x80000550 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib11: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] igb5: <Intel(R) I210 (Copper)> port 0x9000-0x901f mem 0xf7900000-0xf797ffff,0xf7980000-0xf7983fff at device 0.0 on pci11 [...] igb5: EEPROM V3.20-0 eTrack 0x80000550 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 4 RX queues 4 TX queues [...] igb5: Using MSI-X interrupts with 5 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib12: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] igb6: <Intel(R) I350 (Copper)> mem 0xf7820000-0xf783ffff,0xf7844000-0xf7847fff at device 0.0 on pci12 [...] igb6: EEPROM V1.63-0 eTrack 0x800009fb [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 4 RX queues 4 TX queues [...] igb6: Using MSI-X interrupts with 5 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb7: <Intel(R) I350 (Copper)> mem 0xf7800000-0xf781ffff,0xf7840000-0xf7843fff at device 0.1 on pci12 [...] igb7: EEPROM V1.63-0 eTrack 0x800009fb [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 4 RX queues 4 TX queues [...] igb7: Using MSI-X interrupts with 5 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib13: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] igb8: <Intel(R) I350 (Fiber)> port 0x8020-0x803f mem 0xf7720000-0xf773ffff,0xf7744000-0xf7747fff at device 0.0 on pci13 [...] igb8: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 4 RX queues 4 TX queues [...] igb8: Using MSI-X interrupts with 5 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb9: <Intel(R) I350 (Fiber)> port 0x8000-0x801f mem 0xf7700000-0xf771ffff,0xf7740000-0xf7743fff at device 0.1 on pci13 [...] igb9: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 4 RX queues 4 TX queues [...] igb9: Using MSI-X interrupts with 5 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f17000-0xf7f173ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f16000-0xf7f167ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (38400,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1596303638 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub2 on usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <CT480BX500SSD1 M6CR056> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 457862MB (937703088 512 byte sectors) [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] cam_periph_alloc: attempt to re-allocate valid device ada0 rejected flags 0x100 refcount 3 [...] adaasync: Unable to attach to new device due to status 0x6 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] Dual Console: Video Primary, Serial Secondary