Probe #9200cca331 of Fujitsu D3313-A1 S26361-D331... Desktop Computer (FUTRO S920)
Log: dmesg
[...] ---<<BOOT>>---
[...] Copyright (c) 9FFD-C07A The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 14.3-RELEASE-p4 stable/25.7-n271708-85edba454cf9 SMP amd64
[...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
[...] [1] VT(vga): resolution 640x480
[...] [1] CPU: AMD GX-415GA SOC with Radeon(tm) HD Graphics (1497.25-MHz K8-class CPU)
[...] [1] Origin="AuthenticAMD" Id=0x700f01 Family=0x16 Model=0x0 Stepping=1
[...] [1] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
[...] [1] Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
[...] [1] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
[...] [1] AMD Features2=0x154037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PL2I>
[...] [1] Structured Extended Features=0x8<BMI1>
[...] [1] XSAVE Features=0x1<XSAVEOPT>
[...] [1] SVM: NP,NRIP,AFlush,DAssist,NAsids=8
[...] [1] TSC: P-state invariant, performance statistics
[...] [1] real memory = 8589934592 (8192 MB)
[...] [1] avail memory = 7923687424 (7556 MB)
[...] [1] Event timer "LAPIC" quality 100
[...] [1] ACPI APIC Table: <FTS D3313-A1>
[...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
[...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s)
[...] [1] random: unblocking device.
[...] [1] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796)
[...] [1] ioapic0 <Version 2.1> irqs 0-23
[...] [1] ioapic1 <Version 2.1> irqs 24-55
[...] [1] Launching APs: 2 3 1
[...] [1] random: entropy device external interface
[...] [1] wlan: mac acl policy registered
[...] [1] kbd1 at kbdmux0
[...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
[...] [1] vtvga0: <VT VGA driver>
[...] [1] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de
[...] [1] smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.7
[...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
[...] [1] acpi0: <FTS D3313-A1>
[...] [1] acpi0: Power Button (fixed)
[...] [1] cpu0: <ACPI CPU> on acpi0
[...] [1] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
[...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] [1] Event timer "i8254" frequency 1193182 Hz quality 100
[...] [1] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
[...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] [1] Event timer "RTC" frequency 32768 Hz quality 0
[...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] [1] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] [1] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
[...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] [1] pci0: <ACPI PCI bus> on pcib0
[...] [1] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xfeb00000-0xfeb3ffff irq 44 at device 1.0 on pci0
[...] [1] vgapci0: Boot video device
[...] [1] hdac0: <ATI Kabini HDA Controller> mem 0xfeb64000-0xfeb67fff irq 45 at device 1.1 on pci0
[...] [1] pcib1: <ACPI PCI-PCI bridge> irq 28 at device 2.1 on pci0
[...] [1] pci1: <ACPI PCI bus> on pcib1
[...] [1] igb0: <Intel(R) I350 (Copper)> mem 0xfe800000-0xfe8fffff,0xfe904000-0xfe907fff irq 24 at device 0.0 on pci1
[...] [1] igb0: EEPROM V1.63-0 eTrack 0x80000f04
[...] [1] igb0: Using 1024 TX descriptors and 1024 RX descriptors
[...] [1] igb0: Using 4 RX queues 4 TX queues
[...] [1] igb0: Using MSI-X interrupts with 5 vectors
[...] [1] igb0: Ethernet address: ...
[...] [1] igb0: netmap queues/slots: TX 4/1024, RX 4/1024
[...] [1] igb1: <Intel(R) I350 (Copper)> mem 0xfe700000-0xfe7fffff,0xfe900000-0xfe903fff irq 25 at device 0.1 on pci1
[...] [1] igb1: EEPROM V1.63-0 eTrack 0x80000f04
[...] [1] igb1: Using 1024 TX descriptors and 1024 RX descriptors
[...] [1] igb1: Using 4 RX queues 4 TX queues
[...] [1] igb1: Using MSI-X interrupts with 5 vectors
[...] [1] igb1: Ethernet address: ...
[...] [1] igb1: netmap queues/slots: TX 4/1024, RX 4/1024
[...] [1] pcib2: <ACPI PCI-PCI bridge> irq 29 at device 2.2 on pci0
[...] [1] pci2: <ACPI PCI bus> on pcib2
[...] [1] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfea00000-0xfea00fff,0xd0800000-0xd0803fff irq 28 at device 0.0 on pci2
[...] [1] re0: Using 1 MSI-X message
[...] [1] re0: ASPM disabled
[...] [1] re0: Chip rev. 0x4c000000
[...] [1] re0: MAC rev. 0x00000000
[...] [1] miibus0: <MII bus> on re0
[...] [1] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
[...] [1] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
[...] [1] re0: Using defaults for TSO: 65518/35/2048
[...] [1] re0: Ethernet address: ...
[...] [1] re0: netmap queues/slots: TX 1/256, RX 1/256
[...] [1] xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb68000-0xfeb69fff irq 18 at device 16.0 on pci0
[...] [1] xhci0: 32 bytes context size, 64-bit DMA
[...] [1] usbus0 on xhci0
[...] [1] usbus0: 5.0Gbps Super Speed USB v3.0
[...] [1] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb6e000-0xfeb6e3ff irq 19 at device 17.0 on pci0
[...] [1] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported
[...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] [1] ohci0: <AMD FCH USB Controller> mem 0xfeb6d000-0xfeb6dfff irq 18 at device 18.0 on pci0
[...] [1] usbus1 on ohci0
[...] [1] usbus1: 12Mbps Full Speed USB v1.0
[...] [1] ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb6c000-0xfeb6c0ff irq 17 at device 18.2 on pci0
[...] [1] usbus2: EHCI version 1.0
[...] [1] usbus2 on ehci0
[...] [1] usbus2: 480Mbps High Speed USB v2.0
[...] [1] ohci1: <AMD FCH USB Controller> mem 0xfeb6b000-0xfeb6bfff irq 18 at device 19.0 on pci0
[...] [1] usbus3 on ohci1
[...] [1] usbus3: 12Mbps Full Speed USB v1.0
[...] [1] ehci1: <AMD FCH USB 2.0 controller> mem 0xfeb6a000-0xfeb6a0ff irq 17 at device 19.2 on pci0
[...] [1] usbus4: EHCI version 1.0
[...] [1] usbus4 on ehci1
[...] [1] usbus4: 480Mbps High Speed USB v2.0
[...] [1] hdac1: <AMD Hudson-2 HDA Controller> mem 0xfeb60000-0xfeb63fff irq 16 at device 20.2 on pci0
[...] [1] isab0: <PCI-ISA bridge> at device 20.3 on pci0
[...] [1] isa0: <ISA bus> on isab0
[...] [1] acpi_button0: <Power Button> on acpi0
[...] [1] ns8250: UART FCR is broken
[...] [1] ns8250: UART FCR is broken
[...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] [1] uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
[...] [1] orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xcf7ff pnpid ORM0000 on isa0
[...] [1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[...] [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] [1] kbd0 at atkbd0
[...] [1] atkbd0: [GIANT-LOCKED]
[...] [1] hwpstate0: <Cool`n'Quiet 2.0> on cpu0
[...] [1] cpufreq0: <CPU frequency control> on cpu0
[...] [1] Timecounter "TSC" frequency 1497191382 Hz quality 1000
[...] [1] Timecounters tick every 1.000 msec
[...] [1] ugen4.1: <AMD EHCI root HUB> at usbus4
[...] [1] ugen3.1: <AMD OHCI root HUB> at usbus3
[...] [1] ugen1.1: <AMD OHCI root HUB> at usbus1
[...] [1] ugen2.1: <AMD EHCI root HUB> at usbus2
[...] [1] uhub0 on usbus4
[...] [1] uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
[...] [1] ugen0.1: <AMD XHCI root HUB> at usbus0
[...] [1] uhub1 on usbus1
[...] [1] uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
[...] [1] uhub2 on usbus0
[...] [1] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] [1] uhub3 on usbus2
[...] [1] uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
[...] [1] uhub4 on usbus3
[...] [1] uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
[...] [1] ZFS filesystem version: 5
[...] [1] ZFS storage pool version: features support (5000)
[...] [1] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
[...] [1] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
[...] [1] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
[...] [1] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
[...] [1] hdacc1: <Realtek ALC671 HDA CODEC> at cad 2 on hdac1
[...] [1] hdaa1: <Realtek ALC671 Audio Function Group> at nid 1 on hdacc1
[...] [1] pcm2: <Realtek ALC671 (Analog)> at nid 23 and 24 on hdaa1
[...] [1] pcm3: <Realtek ALC671 (Front Analog)> at nid 20 and 25 on hdaa1
[...] [1] pcm4: <Realtek ALC671 (Rear Analog Line-out)> at nid 33 on hdaa1
[...] [1] Trying to mount root from zfs:zroot/ROOT/default []...
[...] [2] uhub4: 4 ports with 4 removable, self powered
[...] [2] uhub1: 4 ports with 4 removable, self powered
[...] [2] uhub2: 4 ports with 4 removable, self powered
[...] [2] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
[...] ada0: <SH00M128GB HP22274P> ACS-2 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 4096bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 122104MB (250069680 512 byte sectors)
[...] [3] uhub3: 4 ports with 4 removable, self powered
[...] [3] Root mount waiting for: usbus4
[...] [3] uhub0: 4 ports with 4 removable, self powered