[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p10 stable/24.1-n254984-f7b006edfa8 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] CPU: 11th Gen Intel(R) Core(TM) i5-11500T @ 1.50GHz (1512.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x405f5e<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16344158208 (15587 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 5 6 10 8 2 4 7 9 11 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x35d0f000-0x35d0f01e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] Firmware Error (ACPI): Failure creating named object [\134ADBG], AE_ALREADY_EXISTS (20201113/dswload2-480) [...] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372) [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X540-AT2> mem 0x6000200000-0x60003fffff,0x6000404000-0x6000407fff at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 6 RX queues 6 TX queues [...] ix0: Using MSI-X interrupts with 7 vectors [...] ix0: allocated for 6 queues [...] ix0: allocated for 6 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x800005c4 PHY FW V272 [...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048 [...] ix1: <Intel(R) X540-AT2> mem 0x6000000000-0x60001fffff,0x6000400000-0x6000403fff at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 6 RX queues 6 TX queues [...] ix1: Using MSI-X interrupts with 7 vectors [...] ix1: allocated for 6 queues [...] ix1: allocated for 6 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x800005c4 PHY FW V272 [...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6001000000-0x6001ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0x40000000-0x40003fff at device 0.0 on pci2 [...] xhci0: <Intel Tiger Lake-H USB 3.2 controller> mem 0x6002100000-0x600210ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x40200000-0x40201fff,0x40203000-0x402030ff,0x40202000-0x402027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb0: <Intel(R) I340 82580 (Copper)> mem 0x3fc80000-0x3fcfffff,0x3fd0c000-0x3fd0ffff at device 0.0 on pci3 [...] igb0: EEPROM V3.29-0 eTrack 0x8000027a [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> mem 0x3fc00000-0x3fc7ffff,0x3fd08000-0x3fd0bfff at device 0.1 on pci3 [...] igb1: EEPROM V3.29-0 eTrack 0x8000027a [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> mem 0x3fb80000-0x3fbfffff,0x3fd04000-0x3fd07fff at device 0.2 on pci3 [...] igb2: EEPROM V3.29-0 eTrack 0x8000027a [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 6 RX queues 6 TX queues [...] igb2: Using MSI-X interrupts with 7 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0x3fb00000-0x3fb7ffff,0x3fd00000-0x3fd03fff at device 0.3 on pci3 [...] igb3: EEPROM V3.29-0 eTrack 0x8000027a [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 6 RX queues 6 TX queues [...] igb3: Using MSI-X interrupts with 7 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0x3fe00000-0x3fefffff,0x3ff00000-0x3ff03fff at device 0.0 on pci4 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc1: <Intel(R) Ethernet Controller I225-V> mem 0x3f900000-0x3f9fffff,0x3fa00000-0x3fa03fff at device 0.0 on pci5 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel (0x43c8) HDA Controller> mem 0x6002110000-0x6002113fff,0x6002000000-0x60020fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] Timecounter "TSC" frequency 1512003260 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <INTEL SSDPEK1A118GA> NVMe namespace [...] nvd0: 112925MB (231270400 512 byte sectors) [...] hdac0: Command 0x100f0000 timeout on address 1 [...] hdac0: Command 0x100f0002 timeout on address 1 [...] hdac0: CODEC at address 1 not responding! [...] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC897 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0 [...] hdacc1: <Intel (0x2816) HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel (0x2816) Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel (0x2816) (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.50, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 2> on usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.4: <Compx 2.4G Wireless Receiver> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <Compx 2.4G Wireless Receiver, class 0/0, rev 1.10/2.00, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.5: <American Power Conversion Back-UPS NS 1500M2 FW:957.e4 .D USB FW:e4> at usbus0 [...] Root mount waiting for: usbus0ugen0.6: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] [...] uhub3 on uhub0 [...] uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 5> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.7: <Razer Razer DeathAdder Elite> at usbus0 [...] ukbd1 on uhub3 [...] ukbd1: <Razer Razer DeathAdder Elite, class 0/0, rev 2.00/2.00, addr 6> on usbus0 [...] kbd3 at ukbd1 [...] ukbd2 on uhub3 [...] ukbd2: <Razer Razer DeathAdder Elite, class 0/0, rev 2.00/2.00, addr 6> on usbus0 [...] kbd4 at ukbd2 [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Cruzer Blade (0x0781:0x5567) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Cruzer Blade (0x0781:0x5567) [...] ugen0.8: <SanDisk Cruzer Blade> at usbus0 [...] umass0 on uhub3 [...] umass0: <SanDisk Cruzer Blade, class 0/0, rev 2.10/1.00, addr 7> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <SanDisk Cruzer Blade 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 7437MB (15232000 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.9: <ITE Tech. Inc. ITE Device> at usbus0 [...] ugen0.10: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub4: 4 ports with 4 removable, self powered