[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD FX(tm)-8150 Eight-Core Processor (3612.26-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f12 Family=0x15 Model=0x1 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,PCXC,PNXC> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33247952896 (31707 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 7 6 2 3 4 5 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 24 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x10f9) HDA Controller> mem 0xfe080000-0xfe083fff irq 25 at device 0.1 on pci1 [...] xhci0: <NVIDIA TU106 USB 3.1 controller> mem 0xd2000000-0xd203ffff,0xd2040000-0xd204ffff irq 26 at device 0.2 on pci1 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci1: <serial bus> at device 0.3 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xfe700000-0xfe7001ff irq 44 at device 0.0 on pci2 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em0: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xfe600000-0xfe61ffff,0xfe620000-0xfe623fff irq 46 at device 0.0 on pci3 [...] em0: EEPROM V1.10-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 53 at device 6.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe500000-0xfe507fff irq 51 at device 0.0 on pci4 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] xhci2: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe400000-0xfe407fff irq 50 at device 0.0 on pci5 [...] xhci2: 32 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib6: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] xhci3: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe300000-0xfe307fff irq 48 at device 0.0 on pci6 [...] xhci3: 32 bytes context size, 64-bit DMA [...] usbus3 on xhci3 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xb050-0xb057,0xb040-0xb043,0xb030-0xb037,0xb020-0xb023,0xb000-0xb01f mem 0xfe200000-0xfe2001ff irq 47 at device 0.0 on pci7 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] pcib8: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 54 at device 12.0 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] ahci2: <Marvell 88SE9215 AHCI SATA controller> port 0xa050-0xa057,0xa040-0xa043,0xa030-0xa037,0xa020-0xa023,0xa000-0xa01f mem 0xfe140000-0xfe1407ff irq 36 at device 0.0 on pci9 [...] ahci2: AHCI v1.00 with 4 6Gbps ports, Port Multiplier supported with FBS [...] ahcich4: <AHCI channel> at channel 0 on ahci2 [...] ahcich5: <AHCI channel> at channel 1 on ahci2 [...] ahcich6: <AHCI channel> at channel 2 on ahci2 [...] ahcich7: <AHCI channel> at channel 3 on ahci2 [...] pcib10: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] ahci3: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe807000-0xfe8073ff irq 19 at device 17.0 on pci0 [...] ahci3: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported [...] ahci3: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich8: <AHCI channel> at channel 0 on ahci3 [...] ahcich9: <AHCI channel> at channel 1 on ahci3 [...] ahcich10: <AHCI channel> at channel 2 on ahci3 [...] ahcich11: <AHCI channel> at channel 3 on ahci3 [...] ahcich12: <AHCI channel> at channel 4 on ahci3 [...] ahcich13: <AHCI channel> at channel 5 on ahci3 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe806000-0xfe806fff irq 18 at device 18.0 on pci0 [...] usbus4 on ohci0 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe805000-0xfe8050ff irq 17 at device 18.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci0 [...] usbus5: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe804000-0xfe804fff irq 20 at device 19.0 on pci0 [...] usbus6 on ohci1 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe803000-0xfe8030ff irq 21 at device 19.2 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib11: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe802000-0xfe802fff irq 18 at device 20.5 on pci0 [...] usbus8 on ohci2 [...] usbus8: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe801000-0xfe801fff irq 22 at device 22.0 on pci0 [...] usbus9 on ohci3 [...] usbus9: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe800000-0xfe8000ff irq 23 at device 22.2 on pci0 [...] usbus10: EHCI version 1.0 [...] usbus10 on ehci2 [...] usbus10: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xce000-0xd0fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1806072919 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen10.1: <ATI EHCI root HUB> at usbus10 [...] ugen8.1: <ATI OHCI root HUB> at usbus8 [...] ugen9.1: <ATI OHCI root HUB> at usbus9 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] ugen2.1: <(0x1b21) XHCI root HUB> at usbus2 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] ugen1.1: <(0x1b21) XHCI root HUB> at usbus1 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] uhub0 on usbus10 [...] uhub1 on usbus8 [...] uhub2 on usbus2 [...] uhub3 on usbus4 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus8 [...] uhub4 on usbus1 [...] uhub4: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus10 [...] uhub2: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub5 on usbus5 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ugen3.1: <(0x1b21) XHCI root HUB> at usbus3 [...] uhub6 on usbus6 [...] ugen7.1: <ATI EHCI root HUB> at usbus7 [...] uhub7 on usbus3 [...] uhub8 on usbus7 [...] uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub7: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub9 on usbus9 [...] uhub9: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus9 [...] ugen0.1: <(0x10de) XHCI root HUB> at usbus0 [...] uhub10 on usbus0 [...] uhub10: <(0x10de) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA (0x0093) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0093) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0093) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0093) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0093) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] uhub1: 2 ports with 2 removable, self powered [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub9: 4 ports with 4 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 5 ports with 5 removable, self powered [...] uhub6: 5 ports with 5 removable, self powered [...] uhub7: 4 ports with 4 removable, self powered [...] uhub4: 4 ports with 4 removable, self powered [...] uhub10: 6 ports with 6 removable, self powered [...] ada0 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada0: <KINGSTON SA400S37120G SBFK61K1> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada1 at ahcich5 bus 0 scbus5 target 0 lun 0 [...] ada1: <KINGSTON SA400S37120G SBFKB1D1> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 114473MB (234441648 512 byte sectors) [...] ada2 at ahcich6 bus 0 scbus6 target 0 lun 0 [...] ada2: <SPCC Solid State Disk HDFED1.2> ACS-4 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 122104MB (250069680 512 byte sectors) [...] ada3 at ahcich7 bus 0 scbus7 target 0 lun 0 [...] ada3: <SPCC Solid State Disk HDFED1.2> ACS-4 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 122104MB (250069680 512 byte sectors) [...] ada4 at ahcich8 bus 0 scbus8 target 0 lun 0 [...] ada4: <ST2000DM008-2UB102 0001> ACS-3 ATA SATA 3.x device [...] ada4: Serial Number... [...] ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada4: Command Queueing enabled [...] ada4: 1907729MB (3907029168 512 byte sectors) [...] ada4: quirks=0x1<4K> [...] ada5 at ahcich9 bus 0 scbus9 target 0 lun 0 [...] ada5: <WDC WD20EZRZ-00Z5HB0 80.00A80> ACS-2 ATA SATA 3.x device [...] ada5: Serial Number... [...] ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada5: Command Queueing enabled [...] ada5: 1907729MB (3907029168 512 byte sectors) [...] ada6 at ahcich10 bus 0 scbus10 target 0 lun 0 [...] ada6: <ST2000DM008-2UB102 0001> ACS-3 ATA SATA 3.x device [...] ada6: Serial Number... [...] ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada6: Command Queueing enabled [...] ada6: 1907729MB (3907029168 512 byte sectors) [...] ada6: quirks=0x1<4K> [...] ada7 at ahcich11 bus 0 scbus11 target 0 lun 0 [...] ada7: <WDC WD20EZRZ-00Z5HB0 80.00A80> ACS-2 ATA SATA 3.x device [...] ada7: Serial Number... [...] ada7: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada7: Command Queueing enabled [...] ada7: 1907729MB (3907029168 512 byte sectors) [...] ada8 at ahcich12 bus 0 scbus12 target 0 lun 0 [...] ada8: <WDC WD20EZAZ-00GGJB0 80.00A80> ACS-3 ATA SATA 3.x device [...] ada8: Serial Number... [...] ada8: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada8: Command Queueing enabled [...] ada8: 1907729MB (3907029168 512 byte sectors) [...] ada9 at ahcich13 bus 0 scbus13 target 0 lun 0 [...] ada9: <WDC WD20EZAZ-00GGJB0 80.00A80> ACS-3 ATA SATA 3.x device [...] ada9: Serial Number... [...] ada9: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada9: Command Queueing enabled [...] ada9: 1907729MB (3907029168 512 byte sectors) [...] uhub0: 4 ports with 4 removable, self powered [...] uhub5: 5 ports with 5 removable, self powered [...] uhub8: 5 ports with 5 removable, self powered [...] ugen6.2: <Logitech USB Keyboard> at usbus6 [...] ukbd0 on uhub6 [...] ukbd0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 2> on usbus6 [...] kbd2 at ukbd0 [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] em0: link state changed to UP [...] lo0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] uhid0 on uhub6 [...] uhid0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 2> on usbus6 [...] bridge0: Ethernet address: ... [...] em0: link state changed to DOWN [...] bridge0: link state changed to UP [...] em0: promiscuous mode enabled [...] bridge0: changing name to 'em0bridge' [...] epair0a: Ethernet address: ... [...] epair0b: Ethernet address: ... [...] epair0a: link state changed to UP [...] epair0b: link state changed to UP [...] epair0a: promiscuous mode enabled [...] epair0a: changing name to 'e0a_bastille0' [...] epair0b: changing name to 'e0b_bastille0' [...] e0b_bastille0: changing name to 'vnet0' [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] e0a_bastille0: link state changed to DOWN [...] vnet0: link state changed to DOWN [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 0 done [...] All buffers synced. [...] pid 20489 (java), jid 3, uid 1001: exited on signal 11 (no core dump - other error) [...] pid 708 (devd), jid 0, uid 0: exited on signal 11 (no core dump - other error) [...] pid 1530 (getty), jid 0, uid 0: exited on signal 11 (no core dump - other error) [...] pid 1532 (getty), jid 0, uid 0: exited on signal 11 (no core dump - other error) [...] pid 1531 (getty), jid 0, uid 0: exited on signal 11 (no core dump - other error) [...] pid 1533 (getty), jid 0, uid 0: exited on signal 11 (no core dump - other error) [...] pid 1536 (getty), jid 0, uid 0: exited on signal 11 (no core dump - other error) [...] pid 1535 (getty), jid 0, uid 0: exited on signal 11 (no core dump - other error) [...] pid 1537 (getty), jid 0, uid 0: exited on signal 11 (no core dump - other error) [...] pid 90784 (sshd), jid 0, uid 1001: exited on signal 11 (no core dump - bad address) [...] pid 1534 (getty), jid 0, uid 0: exited on signal 11 (no core dump - other error) [...] pid 90780 (sshd), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] pid 1514 (sshd), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] Uptime: 1h44m32s [...] pid 90852 (sshd), jid 0, uid 1001: exited on signal 11 (no core dump - bad address) [...] pid 90783 (sshd), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] pid 90853 (sftp-server), jid 0, uid 1001: exited on signal 11 (no core dump - bad address) [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD FX(tm)-8150 Eight-Core Processor (3612.38-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f12 Family=0x15 Model=0x1 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,PCXC,PNXC> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33247948800 (31707 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 4 5 2 3 7 6 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 24 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x10f9) HDA Controller> mem 0xfe080000-0xfe083fff irq 25 at device 0.1 on pci1 [...] xhci0: <NVIDIA TU106 USB 3.1 controller> mem 0xd2000000-0xd203ffff,0xd2040000-0xd204ffff irq 26 at device 0.2 on pci1 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci1: <serial bus> at device 0.3 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xfe700000-0xfe7001ff irq 44 at device 0.0 on pci2 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em0: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xfe600000-0xfe61ffff,0xfe620000-0xfe623fff irq 46 at device 0.0 on pci3 [...] em0: EEPROM V1.10-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 53 at device 6.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe500000-0xfe507fff irq 51 at device 0.0 on pci4 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] xhci2: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe400000-0xfe407fff irq 50 at device 0.0 on pci5 [...] xhci2: 32 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib6: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] xhci3: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe300000-0xfe307fff irq 48 at device 0.0 on pci6 [...] xhci3: 32 bytes context size, 64-bit DMA [...] usbus3 on xhci3 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xb050-0xb057,0xb040-0xb043,0xb030-0xb037,0xb020-0xb023,0xb000-0xb01f mem 0xfe200000-0xfe2001ff irq 47 at device 0.0 on pci7 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] pcib8: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 54 at device 12.0 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] ahci2: <Marvell 88SE9215 AHCI SATA controller> port 0xa050-0xa057,0xa040-0xa043,0xa030-0xa037,0xa020-0xa023,0xa000-0xa01f mem 0xfe140000-0xfe1407ff irq 36 at device 0.0 on pci9 [...] ahci2: AHCI v1.00 with 4 6Gbps ports, Port Multiplier supported with FBS [...] ahcich4: <AHCI channel> at channel 0 on ahci2 [...] ahcich5: <AHCI channel> at channel 1 on ahci2 [...] ahcich6: <AHCI channel> at channel 2 on ahci2 [...] ahcich7: <AHCI channel> at channel 3 on ahci2 [...] pcib10: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] ahci3: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe807000-0xfe8073ff irq 19 at device 17.0 on pci0 [...] ahci3: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported [...] ahci3: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich8: <AHCI channel> at channel 0 on ahci3 [...] ahcich9: <AHCI channel> at channel 1 on ahci3 [...] ahcich10: <AHCI channel> at channel 2 on ahci3 [...] ahcich11: <AHCI channel> at channel 3 on ahci3 [...] ahcich12: <AHCI channel> at channel 4 on ahci3 [...] ahcich13: <AHCI channel> at channel 5 on ahci3 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe806000-0xfe806fff irq 18 at device 18.0 on pci0 [...] usbus4 on ohci0 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe805000-0xfe8050ff irq 17 at device 18.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci0 [...] usbus5: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe804000-0xfe804fff irq 20 at device 19.0 on pci0 [...] usbus6 on ohci1 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe803000-0xfe8030ff irq 21 at device 19.2 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib11: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe802000-0xfe802fff irq 18 at device 20.5 on pci0 [...] usbus8 on ohci2 [...] usbus8: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe801000-0xfe801fff irq 22 at device 22.0 on pci0 [...] usbus9 on ohci3 [...] usbus9: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe800000-0xfe8000ff irq 23 at device 22.2 on pci0 [...] usbus10: EHCI version 1.0 [...] usbus10 on ehci2 [...] usbus10: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xce000-0xd0fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1806072985 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <(0x10de) XHCI root HUB> at usbus0 [...] ugen1.1: <(0x1b21) XHCI root HUB> at usbus1 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] ugen7.1: <ATI EHCI root HUB> at usbus7 [...] ugen2.1: <(0x1b21) XHCI root HUB> at usbus2 [...] ugen9.1: <ATI OHCI root HUB> at usbus9 [...] ugen10.1: <ATI EHCI root HUB> at usbus10 [...] ugen8.1: <ATI OHCI root HUB> at usbus8 [...] uhub0 on usbus0 [...] uhub0: <(0x10de) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus5 [...] uhub2 on usbus7 [...] uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub3 on usbus8 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus8 [...] uhub4 on usbus2 [...] uhub4: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub5 on usbus9 [...] uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus9 [...] ugen3.1: <(0x1b21) XHCI root HUB> at usbus3 [...] uhub6 on usbus10 [...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus10 [...] uhub7 on usbus1 [...] uhub7: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub8 on usbus4 [...] uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] uhub9 on usbus3 [...] uhub9: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub10 on usbus6 [...] uhub10: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA (0x0093) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0093) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0093) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0093) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0093) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] uhub3: 2 ports with 2 removable, self powered [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub5: 4 ports with 4 removable, self powered [...] uhub4: 4 ports with 4 removable, self powered [...] uhub10: 5 ports with 5 removable, self powered [...] uhub8: 5 ports with 5 removable, self powered [...] uhub9: 4 ports with 4 removable, self powered [...] uhub7: 4 ports with 4 removable, self powered [...] uhub0: 6 ports with 6 removable, self powered [...] ada0 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada0: <KINGSTON SA400S37120G SBFK61K1> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada1 at ahcich5 bus 0 scbus5 target 0 lun 0 [...] ada1: <KINGSTON SA400S37120G SBFKB1D1> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 114473MB (234441648 512 byte sectors) [...] ada2 at ahcich6 bus 0 scbus6 target 0 lun 0 [...] ada2: <SPCC Solid State Disk HDFED1.2> ACS-4 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 122104MB (250069680 512 byte sectors) [...] ada3 at ahcich7 bus 0 scbus7 target 0 lun 0 [...] ada3: <SPCC Solid State Disk HDFED1.2> ACS-4 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 122104MB (250069680 512 byte sectors) [...] ada4 at ahcich8 bus 0 scbus8 target 0 lun 0 [...] ada4: <ST2000DM008-2UB102 0001> ACS-3 ATA SATA 3.x device [...] ada4: Serial Number... [...] ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada4: Command Queueing enabled [...] ada4: 1907729MB (3907029168 512 byte sectors) [...] ada4: quirks=0x1<4K> [...] ada5 at ahcich9 bus 0 scbus9 target 0 lun 0 [...] ada5: <WDC WD20EZRZ-00Z5HB0 80.00A80> ACS-2 ATA SATA 3.x device [...] ada5: Serial Number... [...] ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada5: Command Queueing enabled [...] ada5: 1907729MB (3907029168 512 byte sectors) [...] ada6 at ahcich10 bus 0 scbus10 target 0 lun 0 [...] ada6: <ST2000DM008-2UB102 0001> ACS-3 ATA SATA 3.x device [...] ada6: Serial Number... [...] ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada6: Command Queueing enabled [...] ada6: 1907729MB (3907029168 512 byte sectors) [...] ada6: quirks=0x1<4K> [...] ada7 at ahcich11 bus 0 scbus11 target 0 lun 0 [...] ada7: <WDC WD20EZRZ-00Z5HB0 80.00A80> ACS-2 ATA SATA 3.x device [...] ada7: Serial Number... [...] ada7: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada7: Command Queueing enabled [...] ada7: 1907729MB (3907029168 512 byte sectors) [...] ada8 at ahcich12 bus 0 scbus12 target 0 lun 0 [...] ada8: <WDC WD20EZAZ-00GGJB0 80.00A80> ACS-3 ATA SATA 3.x device [...] ada8: Serial Number... [...] ada8: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada8: Command Queueing enabled [...] ada8: 1907729MB (3907029168 512 byte sectors) [...] ada9 at ahcich13 bus 0 scbus13 target 0 lun 0 [...] ada9: <WDC WD20EZAZ-00GGJB0 80.00A80> ACS-3 ATA SATA 3.x device [...] ada9: Serial Number... [...] ada9: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada9: Command Queueing enabled [...] ada9: 1907729MB (3907029168 512 byte sectors) [...] uhub6: 4 ports with 4 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] uhub1: 5 ports with 5 removable, self powered [...] ugen6.2: <Logitech USB Keyboard> at usbus6 [...] ukbd0 on uhub10 [...] ukbd0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 2> on usbus6 [...] kbd2 at ukbd0 [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] em0: link state changed to UP [...] lo0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] uhid0 on uhub10 [...] uhid0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 2> on usbus6