[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255007-1d6e165fb40 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: AMD Athlon(tm) II X3 460 Processor (3415.72-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16364933120 (15606 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <A_M_I OEMAPIC > [...] FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs [...] FreeBSD/SMP: 1 package(s) x 3 core(s) [...] random: unblocking device. [...] ioapic0 <Version 1.1> irqs 0-23 [...] Launching APs: 1 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfac40-0xfac5e [...] smbios0: Version: 2.4 [...] aesni0: No AES or SHA support. [...] acpi0: <A_M_I OEMRSDT> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <memory, RAM> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> port 0x900-0x9ff at device 1.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory, RAM> at device 1.2 (no driver attached) [...] ohci0: <nVidia nForce MCP61 USB Controller> mem 0xfbeff000-0xfbefffff irq 21 at device 2.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xfbefec00-0xfbefecff irq 22 at device 2.1 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbffc000-0xfbffffff irq 16 at device 8.0 on pci1 [...] skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) [...] sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 [...] sk0: Ethernet address: ... [...] miibus0: <MII bus> on sk0 [...] e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] skc1: <D-Link DGE-530T Gigabit Ethernet> port 0xe400-0xe4ff mem 0xfbff8000-0xfbffbfff irq 17 at device 10.0 on pci1 [...] skc1: DGE-530T Gigabit Ethernet Adapter rev. (0x9) [...] sk1: <Marvell Semiconductor, Inc. Yukon> on skc1 [...] sk1: Ethernet address: ... [...] miibus1: <MII bus> on sk1 [...] e1000phy1: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 [...] e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] hdac0: <NVIDIA MCP61 HDA Controller> mem 0xfbef8000-0xfbefbfff irq 23 at device 5.0 on pci0 [...] nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xd480-0xd487 mem 0xfbefd000-0xfbefdfff irq 20 at device 7.0 on pci0 [...] miibus2: <MII bus> on nfe0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus2 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] nfe0: Ethernet address: ... [...] atapci0: <nVidia nForce MCP61 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f mem 0xfbefc000-0xfbefcfff irq 21 at device 8.0 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] atapci1: <nVidia nForce MCP61 SATA300 controller> port 0xc800-0xc807,0xc480-0xc483,0xc400-0xc407,0xc080-0xc083,0xc000-0xc00f mem 0xfbef7000-0xfbef7fff irq 22 at device 8.1 on pci0 [...] ata4: <ATA channel> at channel 0 on atapci1 [...] ata5: <ATA channel> at channel 1 on atapci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] vgapci0: <VGA-compatible display> mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf9000000-0xf9ffffff irq 23 at device 13.0 on pci0 [...] vgapci0: Boot video device [...] acpi_button0: <Power Button> on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/9 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1707766447 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] hdacc0: <VIA VT1708S_4 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <VIA VT1708S_4 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <VIA VT1708S_4 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,27 on hdaa0 [...] ugen1.1: <nVidia EHCI root HUB> at usbus1 [...] ugen0.1: <nVidia OHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub1 on usbus0 [...] uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 10 ports with 10 removable, self powered [...] Root mount waiting for: usbus1 CAM [...] Root mount waiting for: usbus1 CAM [...] ada0 at ata4 bus 0 scbus2 target 0 lun 0 [...] ada0: <INTENSO V0609A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 512bytes) [...] ada0: 114473MB (234441648 512 byte sectors) [...] Root mount waiting for: usbus1 [...] uhub0: 10 ports with 10 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen0.2: <PixArt USB Optical Mouse> at usbus0 [...] ugen0.3: <vendor 0x04d9 USB Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus1 [...] ugen0.4: <vendor 0x15c2 product 0x0038> at usbus0 [...] ugen1.2: <ZTE,Incorporated ZTE Mobile Boardband> at usbus1 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:4:0: Attached to scbus4 [...] cd0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] cd0: <ZTE USB SCSI CD-ROM 2.31 > Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 1 [...] da0: <ZTE MMC Storage 2.31 > Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen1.2: <ZTE,Incorporated ZTE Mobile Boardband> at usbus1 (disconnected) [...] umass0: at uhub0, port 7, addr 2 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] cd0: <ZTE USB SCSI CD-ROM 2.31 > detached [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 1 [...] da0: <ZTE MMC Storage 2.31 > detached [...] (da0:umass-sim0:0:0:1): Periph destroyed [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen1.2: <ZTE,Incorporated ZTE Mobile Boardband> at usbus1 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:4:0: Attached to scbus4 [...] cd0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] cd0: <ZTE USB SCSI CD-ROM 2.31 > Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 6MB (3481 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 1 [...] da0: <ZTE MMC Storage 2.31 > Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: 15000MB (30720000 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] sk0: link state changed to UP [...] sk1: link state changed to DOWN [...] nfe0: link state changed to UP [...] ums0 on uhub1 [...] ums0: <PixArt USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 2> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub1 [...] uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 3> on usbus0 [...] ums1 on uhub1 [...] ums1: <vendor 0x15c2 product 0x0038, class 0/0, rev 1.10/0.01, addr 4> on usbus0 [...] ums1: 3 buttons and [XYZ] coordinates ID=1 [...] uhid1 on uhub1 [...] uhid1: <vendor 0x15c2 product 0x0038, class 0/0, rev 1.10/0.01, addr 4> on usbus0 [...] cdce0 on uhub0 [...] cdce0: <CDC Ethernet Control Model (ECM)> on usbus1 [...] ue0: <USB Ethernet> on cdce0 [...] ue0: Ethernet address: ... [...] lo0: link state changed to UP [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb3 [...] pflog0: permanently promiscuous mode enabled [...] sk0: link state changed to DOWN [...] nfe0: link state changed to DOWN [...] sk0: link state changed to UP [...] nfe0: link state changed to UP [...] nfe0: tx v2 error 0x6100 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] [fib_algo] inet.0 (bsearch4#16) rebuild_fd_flm: switching algo to radix4_lockless [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 done [...] All buffers synced. [...] Uptime: 10h32m2s [...] nfe0: link state changed to DOWN [...] nfe0: link state changed to UP [...] cdce0: detached [...] umass0: detached [...] uhub0: detached [...] ugen0.5: <ZTE,Incorporated ZTE Mobile Boardband> at usbus0 [...] cdce0 on uhub1 [...] cdce0: <CDC Ethernet Control Model (ECM)> on usbus0 [...] umass0 on uhub1 [...] ue0: <USB Ethernet> on cdce0 [...] ue0: Ethernet address: ... [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:4:0: Attached to scbus4 [...] ums0: detached [...] cd0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] cd0: <ZTE USB SCSI CD-ROM 2.31 > Removable CD-ROM SCSI-2 device [...] cd0: 1.000MB/s transfers [...] cd0: 6MB (3481 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ukbd0: detached [...] uhid0: detached [...] ums1: detached [...] uhid1: detached [...] cdce0: detached [...] (da0:umass-sim0:0:0:1): got CAM status 0x44 [...] (da0:umass-sim0:0:0:1): fatal error, failed to attach to device [...] umass0: detached [...] uhub1: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255007-1d6e165fb40 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: AMD Athlon(tm) II X3 460 Processor (3415.78-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16364933120 (15606 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <A_M_I OEMAPIC > [...] FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs [...] FreeBSD/SMP: 1 package(s) x 3 core(s) [...] random: unblocking device. [...] ioapic0 <Version 1.1> irqs 0-23 [...] Launching APs: 1 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfac40-0xfac5e [...] smbios0: Version: 2.4 [...] aesni0: No AES or SHA support. [...] acpi0: <A_M_I OEMRSDT> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <memory, RAM> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> port 0x900-0x9ff at device 1.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory, RAM> at device 1.2 (no driver attached) [...] ohci0: <nVidia nForce MCP61 USB Controller> mem 0xfbeff000-0xfbefffff irq 21 at device 2.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xfbefec00-0xfbefecff irq 22 at device 2.1 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbffc000-0xfbffffff irq 16 at device 8.0 on pci1 [...] skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) [...] sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 [...] sk0: Ethernet address: ... [...] miibus0: <MII bus> on sk0 [...] e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] skc1: <D-Link DGE-530T Gigabit Ethernet> port 0xe400-0xe4ff mem 0xfbff8000-0xfbffbfff irq 17 at device 10.0 on pci1 [...] skc1: DGE-530T Gigabit Ethernet Adapter rev. (0x9) [...] sk1: <Marvell Semiconductor, Inc. Yukon> on skc1 [...] sk1: Ethernet address: ... [...] miibus1: <MII bus> on sk1 [...] e1000phy1: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 [...] e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] hdac0: <NVIDIA MCP61 HDA Controller> mem 0xfbef8000-0xfbefbfff irq 23 at device 5.0 on pci0 [...] nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xd480-0xd487 mem 0xfbefd000-0xfbefdfff irq 20 at device 7.0 on pci0 [...] miibus2: <MII bus> on nfe0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus2 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] nfe0: Ethernet address: ... [...] atapci0: <nVidia nForce MCP61 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f mem 0xfbefc000-0xfbefcfff irq 21 at device 8.0 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] atapci1: <nVidia nForce MCP61 SATA300 controller> port 0xc800-0xc807,0xc480-0xc483,0xc400-0xc407,0xc080-0xc083,0xc000-0xc00f mem 0xfbef7000-0xfbef7fff irq 22 at device 8.1 on pci0 [...] ata4: <ATA channel> at channel 0 on atapci1 [...] ata5: <ATA channel> at channel 1 on atapci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] vgapci0: <VGA-compatible display> mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf9000000-0xf9ffffff irq 23 at device 13.0 on pci0 [...] vgapci0: Boot video device [...] acpi_button0: <Power Button> on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/9 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1707766406 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] hdacc0: <VIA VT1708S_4 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <VIA VT1708S_4 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <VIA VT1708S_4 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,27 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <nVidia OHCI root HUB> at usbus0 [...] ugen1.1: <nVidia EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub1 on usbus1 [...] uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: 10 ports with 10 removable, self powered [...] Root mount waiting for: usbus1 CAM [...] Root mount waiting for: usbus1 CAM [...] ada0 at ata4 bus 0 scbus2 target 0 lun 0 [...] ada0: <INTENSO V0609A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 512bytes) [...] ada0: 114473MB (234441648 512 byte sectors) [...] Root mount waiting for: usbus1 [...] uhub1: 10 ports with 10 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen0.2: <PixArt USB Optical Mouse> at usbus0 [...] ugen0.3: <vendor 0x04d9 USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus1 [...] ugen1.2: <ZTE,Incorporated ZTE Mobile Boardband> at usbus1 [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:4:0: Attached to scbus4 [...] cd0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] cd0: <ZTE USB SCSI CD-ROM 2.31 > Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 6MB (3481 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 1 [...] da0: <ZTE MMC Storage 2.31 > Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: 15000MB (30720000 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.4: <vendor 0x15c2 product 0x0038> at usbus0 [...] sk0: link state changed to UP [...] sk1: link state changed to DOWN [...] nfe0: link state changed to UP [...] ums0 on uhub0 [...] ums0: <PixArt USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 2> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub0 [...] uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 3> on usbus0 [...] ums1 on uhub0 [...] ums1: <vendor 0x15c2 product 0x0038, class 0/0, rev 1.10/0.01, addr 4> on usbus0 [...] ums1: 3 buttons and [XYZ] coordinates ID=1 [...] uhid1 on uhub0 [...] uhid1: <vendor 0x15c2 product 0x0038, class 0/0, rev 1.10/0.01, addr 4> on usbus0 [...] cdce0 on uhub1 [...] cdce0: <CDC Ethernet Control Model (ECM)> on usbus1 [...] ue0: <USB Ethernet> on cdce0 [...] ue0: Ethernet address: ... [...] lo0: link state changed to UP [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb3 [...] pflog0: permanently promiscuous mode enabled [...] sk0: link state changed to DOWN [...] nfe0: link state changed to DOWN [...] sk0: link state changed to UP [...] nfe0: link state changed to UP [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] [fib_algo] inet.0 (bsearch4#16) rebuild_fd_flm: switching algo to radix4_lockless [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 3 2 1 0 0 done [...] All buffers synced. [...] Uptime: 1m51s [...] nfe0: link state changed to DOWN [...] nfe0: link state changed to UP [...] cdce0: detached [...] umass0: detached [...] uhub1: detached [...] ugen0.5: <ZTE,Incorporated ZTE Mobile Boardband> at usbus0 [...] cdce0 on uhub0 [...] cdce0: <CDC Ethernet Control Model (ECM)> on usbus0 [...] umass0 on uhub0 [...] ue0: <USB Ethernet> on cdce0 [...] ue0: Ethernet address: ... [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:4:0: Attached to scbus4 [...] ums0: detached [...] ukbd0: detached [...] cd0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] cd0: <ZTE USB SCSI CD-ROM 2.31 > Removable CD-ROM SCSI-2 device [...] cd0: 1.000MB/s transfers [...] cd0: 6MB (3481 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] uhid0: detached [...] ums1: detached [...] uhid1: detached [...] cdce0: detached [...] (da0:umass-sim0:0:0:1): got CAM status 0x44 [...] (da0:umass-sim0:0:0:1): fatal error, failed to attach to device [...] umass0: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255007-1d6e165fb40 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: AMD Athlon(tm) II X3 460 Processor (3415.65-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16364933120 (15606 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <A_M_I OEMAPIC > [...] FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs [...] FreeBSD/SMP: 1 package(s) x 3 core(s) [...] random: unblocking device. [...] ioapic0 <Version 1.1> irqs 0-23 [...] Launching APs: 1 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfac40-0xfac5e [...] smbios0: Version: 2.4 [...] aesni0: No AES or SHA support. [...] acpi0: <A_M_I OEMRSDT> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <memory, RAM> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> port 0x900-0x9ff at device 1.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory, RAM> at device 1.2 (no driver attached) [...] ohci0: <nVidia nForce MCP61 USB Controller> mem 0xfbeff000-0xfbefffff irq 21 at device 2.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xfbefec00-0xfbefecff irq 22 at device 2.1 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbffc000-0xfbffffff irq 16 at device 8.0 on pci1 [...] pci0:1:8:0: no valid vpd ident found [...] pci0:1:8:0: failed to read VPD data. [...] sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 [...] sk0: Ethernet address: ... [...] miibus0: <MII bus> on sk0 [...] e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] skc1: <D-Link DGE-530T Gigabit Ethernet> port 0xe400-0xe4ff mem 0xfbff8000-0xfbffbfff irq 17 at device 10.0 on pci1 [...] skc1: DGE-530T Gigabit Ethernet Adapter rev. (0x9) [...] sk1: <Marvell Semiconductor, Inc. Yukon> on skc1 [...] sk1: Ethernet address: ... [...] miibus1: <MII bus> on sk1 [...] e1000phy1: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 [...] e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] hdac0: <NVIDIA MCP61 HDA Controller> mem 0xfbef8000-0xfbefbfff irq 23 at device 5.0 on pci0 [...] nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xd480-0xd487 mem 0xfbefd000-0xfbefdfff irq 20 at device 7.0 on pci0 [...] miibus2: <MII bus> on nfe0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus2 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] nfe0: Ethernet address: ... [...] atapci0: <nVidia nForce MCP61 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f mem 0xfbefc000-0xfbefcfff irq 21 at device 8.0 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] atapci1: <nVidia nForce MCP61 SATA300 controller> port 0xc800-0xc807,0xc480-0xc483,0xc400-0xc407,0xc080-0xc083,0xc000-0xc00f mem 0xfbef7000-0xfbef7fff irq 22 at device 8.1 on pci0 [...] ata4: <ATA channel> at channel 0 on atapci1 [...] ata5: <ATA channel> at channel 1 on atapci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] vgapci0: <VGA-compatible display> mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf9000000-0xf9ffffff irq 23 at device 13.0 on pci0 [...] vgapci0: Boot video device [...] acpi_button0: <Power Button> on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/9 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1707766419 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] hdacc0: <VIA VT1708S_4 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <VIA VT1708S_4 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <VIA VT1708S_4 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,27 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen1.1: <nVidia EHCI root HUB> at usbus1 [...] ugen0.1: <nVidia OHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub1 on usbus0 [...] uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub1: 10 ports with 10 removable, self powered [...] Root mount waiting for: usbus1 CAM [...] Root mount waiting for: usbus1 CAM [...] ada0 at ata4 bus 0 scbus2 target 0 lun 0 [...] ada0: <INTENSO V0609A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 512bytes) [...] ada0: 114473MB (234441648 512 byte sectors) [...] Root mount waiting for: usbus1 [...] uhub0: 10 ports with 10 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen0.2: <PixArt USB Optical Mouse> at usbus0 [...] ugen0.3: <vendor 0x04d9 USB Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.2: <ZTE,Incorporated ZTE Mobile Boardband> at usbus1 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:4:0: Attached to scbus4 [...] cd0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] cd0: <ZTE USB SCSI CD-ROM 2.31 > Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 6MB (3481 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 1 [...] da0: <ZTE MMC Storage 2.31 > Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: 15000MB (30720000 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.4: <vendor 0x15c2 product 0x0038> at usbus0