[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p3 stable/25.1-n269825-cbaf3aa6b26b SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0x90a to 0x90d [...] CPU: Intel(R) Celeron(R) CPU N2807 @ 1.58GHz (1583.44-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30679 Family=0x6 Model=0x37 Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3936870400 (3754 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 80000000 vs 80000001 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe080-0xe087 mem 0x90000000-0x903fffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] sdhci_pci0: <Intel Bay Trail eMMC 4.5 Controller> mem 0x9081a000-0x9081afff,0x90819000-0x90819fff irq 16 at device 16.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] sdhci_pci1: <Generic SD HCI> mem 0x90818000-0x90818fff,0x90817000-0x90817fff irq 18 at device 18.0 on pci0 [...] sdhci_pci1: 1 slot(s) allocated [...] ahci0: <AHCI SATA controller> port 0xe070-0xe077,0xe060-0xe063,0xe050-0xe057,0xe040-0xe043,0xe020-0xe03f mem 0x90816000-0x908167ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0x90800000-0x9080ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0x90810000-0x90813fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I210 (Copper)> mem 0x90700000-0x9077ffff,0x90780000-0x90783fff irq 16 at device 0.0 on pci1 [...] igb0: EEPROM V3.25-0 eTrack 0x800005cf [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb1: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0x90600000-0x9067ffff,0x90680000-0x90683fff irq 19 at device 0.0 on pci4 [...] igb1: EEPROM V3.25-0 eTrack 0x800005d1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci0: <Intel BayTrail USB 2.0 controller> mem 0x90815000-0x908153ff irq 23 at device 29.0 on pci0 [...] usbus1: waiting for BIOS to give up control [...] usbus1: timed out waiting for BIOS [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1583333073 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mmc0: No compatible cards found on bus [...] hdacc0: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: hdaa_audio_as_parse: Duplicate pin 0 (5) in association 1! Disabling association. [...] hdaa0: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association. [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <ADATA IMSS332-032GM O1026A> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 30533MB (62533296 512 byte sectors) [...] cam_periph_alloc: attempt to re-allocate valid device pass0 rejected flags 0 refcount 3 [...] passasync: Unable to attach new device due to status 0x6: CCB request was invalid [...] cam_periph_alloc: attempt to re-allocate valid device ada0 rejected flags 0x100 refcount 2 [...] adaasync: Unable to attach to new device due to status 0x6 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <Ralink 802.11 n WLAN> at usbus0 [...] run0 on uhub0 [...] run0: <Ralink 802.11 n WLAN, class 0/0, rev 2.00/1.01, addr 1> on usbus0 [...] run0: MAC/BBP RT2872 (rev 0x0202), RF RT2850 (MIMO 2T2R), address XXX [...] run0: [HT] Enabling 802.11n [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.3: <vendor 0x0000 product 0x0000> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x0000 product 0x0000, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 3 ports with 3 removable, self powered [...] ugen0.4: <vendor 0x1a40 USB 2.0 Hub MTT> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 3> on usbus0 [...] uhub3: MTT enabled [...] Root mount waiting for: usbus0 usbus1 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.5: <Gaming KB Gaming KB> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <Gaming KB Gaming KB, class 0/0, rev 1.10/3f.2b, addr 4> on usbus0 [...] kbd1 at ukbd0 [...] ukbd1 on uhub3 [...] ukbd1: <Gaming KB Gaming KB, class 0/0, rev 1.10/3f.2b, addr 4> on usbus0 [...] kbd2 at ukbd1 [...] Root mount waiting for: usbus0 usbus1 [...] uhub1: 8 ports with 8 removable, self powered [...] ugen0.6: <DAVICOM DM9621A USB To FastEther> at usbus0 [...] ugen1.2: <vendor 0x8087 product 0x07e6> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.17, addr 2> on usbus1 [...] uhub4: 4 ports with 4 removable, self powered