[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.0-RELEASE-p3 #0: Mon Dec 11 04:56:01 UTC 2023 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) [...] VT(efifb): resolution 1920x1080 [...] CPU: 13th Gen Intel(R) Core(TM) i7-13700K (3417.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb0671 Family=0x6 Model=0xb7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c027bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,TME,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc1cc410<FSRM,MD_CLEAR,PCONFIG,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x488fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33165889536 (31629 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs [...] FreeBSD/SMP: Non-uniform topology [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 20 4 23 5 11 3 13 9 7 8 6 10 2 21 15 22 17 16 18 19 12 14 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x3ba56000-0x3ba5601e [...] smbios0: Version: 3.6, BCD Revision: 3.6 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 350 [...] Event timer "HPET1" frequency 19200000 Hz quality 340 [...] Event timer "HPET2" frequency 19200000 Hz quality 340 [...] Event timer "HPET3" frequency 19200000 Hz quality 340 [...] Event timer "HPET4" frequency 19200000 Hz quality 340 [...] Event timer "HPET5" frequency 19200000 Hz quality 340 [...] Event timer "HPET6" frequency 19200000 Hz quality 340 [...] Event timer "HPET7" frequency 19200000 Hz quality 340 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> mem 0x51900000-0x51903fff at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] vgapci0: <VGA-compatible display> port 0x5000-0x50ff mem 0x40000000-0x4fffffff,0x50000000-0x501fffff,0x51700000-0x517fffff at device 0.0 on pci3 [...] hdac0: <ATI (0xab28) HDA Controller> mem 0x51820000-0x51823fff at device 0.1 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] nvme0: <Generic NVMe Device> mem 0x51b00000-0x51b03fff at device 0.0 on pci4 [...] xhci0: <Intel Alder Lake USB 3.2 controller> mem 0x51c00000-0x51c0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <serial bus> at device 21.2 (no driver attached) [...] pci0: <serial bus> at device 21.3 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] pci0: <serial bus> at device 25.1 (no driver attached) [...] pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib6 [...] re0: <Realtek PCIe 2.5GbE Family Controller> port 0x3000-0x30ff mem 0x51a00000-0x51a0ffff,0x51a10000-0x51a13fff at device 0.0 on pci5 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.99.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] hwpstate_intel16: <Intel Speed Shift> on cpu16 [...] hwpstate_intel17: <Intel Speed Shift> on cpu17 [...] hwpstate_intel18: <Intel Speed Shift> on cpu18 [...] hwpstate_intel19: <Intel Speed Shift> on cpu19 [...] hwpstate_intel20: <Intel Speed Shift> on cpu20 [...] hwpstate_intel21: <Intel Speed Shift> on cpu21 [...] hwpstate_intel22: <Intel Speed Shift> on cpu22 [...] hwpstate_intel23: <Intel Speed Shift> on cpu23 [...] Timecounter "TSC-low" frequency 1708805056 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvme0: Allocated 16MB host memory buffer [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <Lexar SSD NM620 1TB SN10660 NEB652R001989P110N> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] Trying to mount root from ufs:/dev/nda0p3 [rw]... [...] uhub0: 25 ports with 25 removable, self powered [...] ugen0.2: <COMPANY USB Device> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <COMPANY USB Device, class 0/0, rev 1.10/0.0f, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ukbd1 on uhub0 [...] ukbd1: <COMPANY USB Device, class 0/0, rev 1.10/0.0f, addr 1> on usbus0 [...] kbd3 at ukbd1 [...] ugen0.3: <C-Media Electronics Inc. USB Audio Device> at usbus0 [...] ugen0.4: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.90, addr 3> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.5: <SteelSeries SteelSeries Apex 3> at usbus0 [...] ukbd2 on uhub1 [...] ukbd2: <SteelSeries SteelSeries Apex 3, class 0/0, rev 2.00/0.28, addr 4> on usbus0 [...] kbd4 at ukbd2 [...] ukbd3 on uhub1 [...] ukbd3: <SteelSeries SteelSeries Apex 3, class 0/0, rev 2.00/0.28, addr 4> on usbus0 [...] kbd5 at ukbd3 [...] ugen0.6: <Realtek 802.11n NIC> at usbus0 [...] ugen0.7: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.90, addr 6> on usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.8: <ITE Tech. Inc. ITE Device> at usbus0 [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (DIMGREY_CAVEFISH 0x1002:0x73EF 0x1849:0x5236 0xC1). [...] drmn0: Trusted Memory Zone (TMZ) feature not supported [...] [drm] register mmio base: 0x51700000 [...] [drm] register mmio size: 1048576 [...] [drm] add ip block number 0 <nv_common> [...] [drm] add ip block number 1 <gmc_v10_0> [...] [drm] add ip block number 2 <navi10_ih> [...] [drm] add ip block number 3 <psp> [...] [drm] add ip block number 4 <smu> [...] [drm] add ip block number 5 <dm> [...] [drm] add ip block number 6 <gfx_v10_0> [...] [drm] add ip block number 7 <sdma_v5_2> [...] [drm] add ip block number 8 <vcn_v3_0> [...] [drm] add ip block number 9 <jpeg_v3_0> [...] drmn0: Fetched VBIOS from VFCT [...] amdgpu: ATOM BIOS: 113-EXT800334-L03 [...] [drm] VCN(0) decode is enabled in VM mode [...] [drm] VCN(0) encode is enabled in VM mode [...] [drm] JPEG decode is enabled in VM mode [...] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [...] drmn0: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used) [...] drmn0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [...] drmn0: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF [...] [drm] Detected VRAM RAM=8176M, BAR=256M [...] [drm] RAM width 128bits GDDR6 [...] [drm] amdgpu: 8176M of VRAM memory ready [...] [drm] amdgpu: 8176M of GTT memory ready. [...] [drm] GART: num cpu pages 131072, num gpu pages 131072 [...] [drm] PCIE GART of 512M enabled (table at 0x00000080007E9000). [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_sos.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_ta.bin' [...] drmn0: PSP runtime database doesn't exist [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_smc.bin' [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_dmcub.bin' [...] [drm] Loading DMUB firmware via PSP: version=0x0202001E [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_pfp.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_me.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_ce.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_rlc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_mec.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_mec2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_sdma.bin' [...] [drm] use_doorbell being set to: [true] [...] [drm] use_doorbell being set to: [true] [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_vcn.bin' [...] [drm] Found VCN firmware Version ENC: 1.27 DEC: 2 VEP: 0 Revision: 0 [...] drmn0: Will use PSP to load VCN firmware [...] [drm] reserve 0xa00000 from 0x81fe000000 for PSP TMR [...] drmn0: RAS: optional ras ta ucode is not available [...] drmn0: SECUREDISPLAY: securedisplay ta ucode is not available [...] drmn0: smu driver if version = 0x0000000f, smu fw if version = 0x00000013, smu fw version = 0x003b2b00 (59.43.0) [...] drmn0: SMU driver if version not matched [...] drmn0: use vbios provided pptable [...] drmn0: SMU is initialized successfully! [...] [drm] Display Core initialized with v3.2.149! [...] [drm] DMUB hardware initialized: version=0x0202001E [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] [drm] kiq ring mec 2 pipe 1 q 0 [...] [drm] VCN decode and encode initialized successfully(under DPG Mode). [...] [drm] JPEG decode initialized successfully. [...] drmn0: SE 2, SH per SE 2, CU per SH 8, active_cu_number 32 [...] [drm] fb mappable at 0x40AC5000 [...] [drm] vram apper at 0x40000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0x40ac5000 vbase=0xfffff80040ac5000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] drmn0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 [...] drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [...] drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [...] drmn0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [...] drmn0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [...] drmn0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [...] drmn0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [...] drmn0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [...] drmn0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [...] drmn0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [...] drmn0: ring sdma0 uses VM inv eng 12 on hub 0 [...] drmn0: ring sdma1 uses VM inv eng 13 on hub 0 [...] drmn0: ring vcn_dec_0 uses VM inv eng 0 on hub 1 [...] drmn0: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1 [...] drmn0: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1 [...] drmn0: ring jpeg_dec uses VM inv eng 5 on hub 1 [...] vgapci0: child drmn0 requested pci_get_powerstate [...] drmn0: Using BACO for runtime pm [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic5: <LinuxKPI I2C> on drm1 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drm2 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iic7: <LinuxKPI I2C> on drm3 [...] iicbus7: <Philips I2C bus> on lkpi_iic7 [...] iic7: <I2C generic I/O> on iicbus7 [...] [drm] Initialized amdgpu 3.42.0 20150101 for drmn0 on minor 0 [...] ig4iic0: <Intel Alder Lake-S I2C Controller-0> mem 0xfe0f9000-0xfe0f9fff at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] ig4iic0: unable to map interrupt [...] device_attach: ig4iic0 attach returned 6 [...] ig4iic0: <Intel Alder Lake-S I2C Controller-1> mem 0xfe0fa000-0xfe0fafff at device 21.1 on pci0 [...] ig4iic0: Using MSI [...] ig4iic0: unable to map interrupt [...] device_attach: ig4iic0 attach returned 6 [...] ig4iic0: <Intel Alder Lake-S I2C Controller-2> mem 0xfe0fb000-0xfe0fbfff at device 21.2 on pci0 [...] ig4iic0: Using MSI [...] ig4iic0: unable to map interrupt [...] device_attach: ig4iic0 attach returned 6 [...] ig4iic0: <Intel Alder Lake-S I2C Controller-3> mem 0xfe0fc000-0xfe0fcfff at device 21.3 on pci0 [...] ig4iic0: Using MSI [...] iicbus8: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] iic8: <I2C generic I/O> on iicbus8 [...] ig4iic1: <Intel Alder Lake-S I2C Controller-4> mem 0x51c16000-0x51c16fff at device 25.0 on pci0 [...] ig4iic1: Using MSI [...] ig4iic1: unable to map interrupt [...] device_attach: ig4iic1 attach returned 6 [...] ig4iic1: <Intel Alder Lake-S I2C Controller-5> mem 0x51c15000-0x51c15fff at device 25.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus9: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iic9: <I2C generic I/O> on iicbus9 [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x51c14000-0x51c140ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ig4iic2: <Intel Alder Lake-S I2C Controller-0> mem 0xfe0f9000-0xfe0f9fff irq 27 at device 21.0 on pci0 [...] ig4iic2: Using MSI [...] ig4iic2: unable to map interrupt [...] device_attach: ig4iic2 attach returned 6 [...] ig4iic2: <Intel Alder Lake-S I2C Controller-1> mem 0xfe0fa000-0xfe0fafff irq 40 at device 21.1 on pci0 [...] ig4iic2: Using MSI [...] ig4iic2: unable to map interrupt [...] device_attach: ig4iic2 attach returned 6 [...] ig4iic2: <Intel Alder Lake-S I2C Controller-2> mem 0xfe0fb000-0xfe0fbfff irq 29 at device 21.2 on pci0 [...] ig4iic2: Using MSI [...] ig4iic2: unable to map interrupt [...] device_attach: ig4iic2 attach returned 6 [...] ig4iic2: <Intel Alder Lake-S I2C Controller-4> mem 0x51c16000-0x51c16fff irq 31 at device 25.0 on pci0 [...] ig4iic2: Using MSI [...] ig4iic2: unable to map interrupt [...] device_attach: ig4iic2 attach returned 6 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134GSA1.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: cannot find EC device [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: cannot find EC device [...] lo0: link state changed to UP [...] re0: link state changed to UP [...] ums0 on uhub0 [...] ums0: <COMPANY USB Device, class 0/0, rev 1.10/0.0f, addr 1> on usbus0 [...] ums0: 8 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub0 [...] uhid0: <C-Media Electronics Inc. USB Audio Device, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] ums1 on uhub1 [...] ums1: <SteelSeries SteelSeries Apex 3, class 0/0, rev 2.00/0.28, addr 4> on usbus0 [...] ums1: 8 buttons and [XYZ] coordinates ID=2 [...] uhid1 on uhub1 [...] uhid1: <SteelSeries SteelSeries Apex 3, class 0/0, rev 2.00/0.28, addr 4> on usbus0 [...] uhid2 on uhub0 [...] uhid2: <ITE Tech. Inc. ITE Device, class 0/0, rev 2.00/0.01, addr 7> on usbus0 [...] uaudio0 on uhub0 [...] uaudio0: <C-Media Electronics Inc. USB Audio Device, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer. [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x2ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x2ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm5: <USB audio> on uaudio0 [...] uaudio0: HID volume keys found. [...] rtwn0 on uhub1 [...] rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 5> on usbus0 [...] rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R