[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.3-RELEASE-p2 #XigmaNAS: Thu Feb 17 15:40:28 CET 2022 [...] root@dev_zoon01@xigmanas.com:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: AMD FX(tm)-4100 Quad-Core Processor (3616.07-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f12 Family=0x15 Model=0x1 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,PCXC,PNXC> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8138076160 (7761 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <GBT GBTUACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0: MADT APIC ID 2 != hw id 0 [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1808033393 Hz quality 1000 [...] random: entropy device external interface [...] WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0. [...] WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0. [...] md0: Preloaded image </mfsroot> 134217728 bytes at 0xffffffff82840a08 [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812545f0, 0) error 19 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000156 [4344] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] acpi0: <GBT GBTUACPI> on motherboard [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20200430/dspkginit-605) [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xfb000000-0xfbffffff,0xd0000000-0xd7ffffff,0xde000000-0xdfffffff irq 18 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA GF119 HDA Controller> mem 0xfcffc000-0xfcffffff irq 19 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xdf00-0xdf07,0xde00-0xde03,0xdd00-0xdd07,0xdc00-0xdc03,0xdb00-0xdb1f mem 0xfdaff000-0xfdaff1ff irq 17 at device 0.0 on pci2 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xce00-0xceff mem 0xfddff000-0xfddfffff,0xfddf8000-0xfddfbfff irq 18 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0 [...] ahci1: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported [...] ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] ahcich4: <AHCI channel> at channel 2 on ahci1 [...] ahcich5: <AHCI channel> at channel 3 on ahci1 [...] ahcich6: <AHCI channel> at channel 4 on ahci1 [...] ahcich7: <AHCI channel> at channel 5 on ahci1 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0 [...] usbus6 on ohci4 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xd0000-0xd7fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] iSCSI boot driver version 0.3.2 [...] NIC0: IP address: XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX [...] NIC0: Prefix: 0 [...] NIC0: MAC address: XXX [...] TGT0: Target IP address: XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX [...] TGT0: Target Port: 0 [...] TGT0: Target LUN: 0 [...] Boot NIC: lo0 [...] Configure IPv6 by NIC0 [...] in6_control error [...] IP set error [...] lo0: link state changed to UP [...] hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] Trying to mount root from ufs:/dev/md0 []... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub6: 3 ports with 3 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] uhub4: 3 ports with 3 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <KingFast KFS03005> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: 7551MB (15465744 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <KINGSTON SA400S37120G S3Z40107> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 114473MB (234441648 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <ST3500312CS SC13> ATA8-ACS SATA 1.x device [...] ada2: Serial Number... [...] ada2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 476940MB (976773168 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <ST3500312CS SC13> ATA8-ACS SATA 2.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 476940MB (976773168 512 byte sectors) [...] ada4 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada4: <ST3500414CS CA14> ATA8-ACS SATA 2.x device [...] ada4: Serial Number... [...] ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada4: Command Queueing enabled [...] ada4: 476940MB (976773168 512 byte sectors) [...] ada5 at ahcich5 bus 0 scbus5 target 0 lun 0 [...] ada5: <ST3500414CS CA14> ATA8-ACS SATA 2.x device [...] ada5: Serial Number... [...] ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada5: Command Queueing enabled [...] ada5: 476940MB (976773168 512 byte sectors) [...] ada6 at ahcich6 bus 0 scbus6 target 0 lun 0 [...] ada6: <ST3500414CS CA14> ATA8-ACS SATA 2.x device [...] ada6: Serial Number... [...] ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada6: Command Queueing enabled [...] ada6: 476940MB (976773168 512 byte sectors) [...] ada7 at ahcich7 bus 0 scbus7 target 0 lun 0 [...] ada7: <ST3500414CS CA14> ATA8-ACS SATA 2.x device [...] ada7: Serial Number... [...] ada7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada7: Command Queueing enabled [...] ada7: 476940MB (976773168 512 byte sectors) [...] CPU: AMD FX(tm)-4100 Quad-Core Processor (3616.07-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f12 Family=0x15 Model=0x1 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,PCXC,PNXC> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] bridge0: Ethernet address: ... [...] re0: promiscuous mode enabled [...] bridge0: link state changed to UP [...] bridge0: changing name to 're0bridge' [...] epair0a: Ethernet address: ... [...] epair0b: Ethernet address: ... [...] epair0a: link state changed to UP [...] epair0b: link state changed to UP [...] re0: link state changed to DOWN [...] epair0a: promiscuous mode enabled [...] epair0a: changing name to 'e0a_bastille0' [...] epair0b: changing name to 'e0b_bastille0' [...] e0b_bastille0: changing name to 'vnet0' [...] lo0: link state changed to UP [...] re0: link state changed to UP [...] epair1a: Ethernet address: ... [...] epair1b: Ethernet address: ... [...] epair1a: link state changed to UP [...] epair1b: link state changed to UP [...] epair1a: promiscuous mode enabled [...] epair1a: changing name to 'e0a_bastille1' [...] epair1b: changing name to 'e0b_bastille1' [...] e0b_bastille1: changing name to 'vnet0' [...] lo0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] e0a_bastille1: link state changed to DOWN [...] vnet0: link state changed to DOWN [...] epair1a: Ethernet address: ... [...] epair1b: Ethernet address: ... [...] epair1a: link state changed to UP [...] epair1b: link state changed to UP [...] epair1a: promiscuous mode enabled [...] epair1a: changing name to 'e0a_bastille1' [...] epair1b: changing name to 'e0b_bastille1' [...] e0b_bastille1: changing name to 'vnet0' [...] lo0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vnet0