[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE r366954 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz (2000.04-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x50662 Family=0x6 Model=0x56 Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 68717379584 (65534 MB) [...] avail memory = 66732007424 (63640 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <SUPERM SMCI--MB> [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 4 15 6 11 9 12 10 13 14 3 8 7 5 [...] Timecounter "TSC" frequency 2000039572 Hz quality 1000 [...] random: entropy device external interface [...] 000.000017 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <SUPERM SMCI--MB> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xfb400000-0xfb403fff irq 16 at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci1 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 2.2 on pci1 [...] ACPI Warning: \134_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20200430/nsprepkg-251) [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib4: no PRT entry for 3.0.INTA [...] pcib4: no PRT entry for 3.0.INTB [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xfbc00000-0xfbdfffff,0xfbe04000-0xfbe07fff irq 11 at device 0.0 on pci4 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xfba00000-0xfbbfffff,0xfbe00000-0xfbe03fff irq 10 at device 0.1 on pci4 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci1 [...] pci5: <ACPI PCI bus> on pcib5 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xfb500000-0xfb50ffff irq 19 at device 20.0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci1: <simple comms> at device 22.0 (no driver attached) [...] pci1: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xfb514000-0xfb5143ff irq 18 at device 26.0 on pci1 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci1 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe020-0xe03f mem 0xfb120000-0xfb13ffff,0xfb144000-0xfb147fff irq 16 at device 0.0 on pci6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe000-0xe01f mem 0xfb100000-0xfb11ffff,0xfb140000-0xfb143fff irq 17 at device 0.1 on pci6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci1 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 18 at device 0.0 on pci8 [...] vgapci0: Boot video device [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xfb513000-0xfb5133ff irq 18 at device 29.0 on pci1 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci1 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xfb512000-0xfb5127ff irq 16 at device 31.2 on pci1 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] nvd0: <Samsung SSD 970 EVO Plus 1TB> NVMe namespace [...] nvd0: 953869MB (1953525168 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <A45ACXBA9TA AW2.21> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada2 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada2: <ST8000VN0022-2EL112 SC61> ACS-3 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 7630885MB (15628053168 512 byte sectors) [...] ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: pass2,ada2 in 'Slot 04', SATA Slot: scbus4 target 0 [...] ada3 at ahcich5 bus 0 scbus5 target 0 lun 0 [...] ada3: <WDC WD80PURZ-85YNPY0 80.H0A80> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 7630885MB (15628053168 512 byte sectors) [...] ses0: pass3,ada3 in 'Slot 05', SATA Slot: scbus5 target 0 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 1> on usbus0 [...] uhub3: MTT enabled [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x0557 product 0x7000> at usbus0 [...] uhub6 on uhub1 [...] uhub6: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub6: 4 ports with 3 removable, self powered [...] ugen0.4: <vendor 0x0557 product 0x2419> at usbus0 [...] ukbd0 on uhub6 [...] ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.5: <JMicron USB to ATA/ATAPI Bridge> at usbus0 [...] umass0 on uhub1 [...] umass0: <JMicron USB to ATA/ATAPI Bridge, class 0/0, rev 3.00/2.05, addr 4> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <WDC WD40 EFRX-68N32N0 0125> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 3815447MB (7814037168 512 byte sectors) [...] da0: quirks=0xa<NO_6_BYTE,4K> [...] da1 at umass-sim0 bus 0 scbus7 target 0 lun 1 [...] da1: <ST4000VX 007-2DT166 0125> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 400.000MB/s transfers [...] da1: 3815447MB (7814037168 512 byte sectors) [...] da1: quirks=0x2<NO_6_BYTE> [...] da2 at umass-sim0 bus 0 scbus7 target 0 lun 2 [...] da2: <ST4000VX 007-2DT166 0125> Fixed Direct Access SPC-4 SCSI device [...] da2: Serial Number... [...] da2: 400.000MB/s transfers [...] da2: 3815447MB (7814037168 512 byte sectors) [...] da2: quirks=0x2<NO_6_BYTE> [...] da3 at umass-sim0 bus 0 scbus7 target 0 lun 3 [...] da3: <ST4000VX 007-2DT166 0125> Fixed Direct Access SPC-4 SCSI device [...] da3: Serial Number... [...] da3: 400.000MB/s transfers [...] da3: 3815447MB (7814037168 512 byte sectors) [...] da3: quirks=0x2<NO_6_BYTE> [...] da4 at umass-sim0 bus 0 scbus7 target 0 lun 4 [...] da4: <ST4000VX 007-2DT166 0125> Fixed Direct Access SPC-4 SCSI device [...] da4: Serial Number... [...] da4: 400.000MB/s transfers [...] da4: 3815447MB (7814037168 512 byte sectors) [...] da4: quirks=0x2<NO_6_BYTE> [...] da5 at umass-sim0 bus 0 scbus7 target 0 lun 5 [...] da5: <ST4000VX 007-2DT166 0125> Fixed Direct Access SPC-4 SCSI device [...] da5: Serial Number... [...] da5: 400.000MB/s transfers [...] da5: 3815447MB (7814037168 512 byte sectors) [...] da5: quirks=0x2<NO_6_BYTE> [...] Root mount waiting for: usbus0 [...] ugen0.6: <JMicron USB to ATA/ATAPI Bridge> at usbus0 [...] umass1 on uhub1 [...] umass1: <JMicron USB to ATA/ATAPI Bridge, class 0/0, rev 3.00/2.05, addr 5> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0100 [...] umass1:8:1: Attached to scbus8 [...] da6 at umass-sim1 bus 1 scbus8 target 0 lun 0 [...] da6: <WDC WD25 00AAKX-001CA0 0125> Fixed Direct Access SPC-4 SCSI device [...] da6: Serial Number... [...] da6: 400.000MB/s transfers [...] da6: 238475MB (488397168 512 byte sectors) [...] da6: quirks=0x2<NO_6_BYTE> [...] da7 at umass-sim1 bus 1 scbus8 target 0 lun 1 [...] da7: <WDC WD25 00AAKX-001CA0 0125> Fixed Direct Access SPC-4 SCSI device [...] da7: Serial Number... [...] da7: 400.000MB/s transfers [...] da7: 238475MB (488397168 512 byte sectors) [...] da7: quirks=0x2<NO_6_BYTE> [...] da8 at umass-sim1 bus 1 scbus8 target 0 lun 2 [...] da8: <WDC WD25 00AAJS-00L7A0 0125> Fixed Direct Access SPC-4 SCSI device [...] da8: Serial Number... [...] da8: 400.000MB/s transfers [...] da8: 238475MB (488397168 512 byte sectors) [...] da8: quirks=0x2<NO_6_BYTE> [...] da9 at umass-sim1 bus 1 scbus8 target 0 lun 3 [...] da9: <ST325031 8AS 0125> Fixed Direct Access SPC-4 SCSI device [...] da9: Serial Number... [...] da9: 400.000MB/s transfers [...] da9: 238475MB (488397168 512 byte sectors) [...] da9: quirks=0x2<NO_6_BYTE> [...] ioat0: <BDXDE IOAT Ch0> mem 0xfb306000-0xfb307fff irq 16 at device 0.0 on pci3 [...] ioat0: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break> [...] ioat1: <BDXDE IOAT Ch1> mem 0xfb304000-0xfb305fff irq 17 at device 0.1 on pci3 [...] ioat1: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break> [...] ioat2: <BDXDE IOAT Ch2> mem 0xfb302000-0xfb303fff irq 18 at device 0.2 on pci3 [...] ioat2: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break> [...] ioat3: <BDXDE IOAT Ch3> mem 0xfb300000-0xfb301fff irq 19 at device 0.3 on pci3 [...] ioat3: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break> [...] tap0: Ethernet address: ... [...] bridge0: Ethernet address: ... [...] lo0: link state changed to UP [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lagg0: link state changed to UP [...] ums0 on uhub6 [...] ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] tap0: link state changed to UP [...] tap0: promiscuous mode enabled [...] bridge0: link state changed to UP [...] igb0: promiscuous mode enabled [...] igb1: promiscuous mode enabled [...] lagg0: promiscuous mode enabled [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] lagg0: link state changed to UP [...] pid 10152 (ccnet-server), jid 17, uid 900: exited on signal 11 [...] pid 90534 (ccnet-server), jid 31, uid 900: exited on signal 11 [...] pid 96828 (ccnet-server), jid 44, uid 900: exited on signal 11 [...] tap0: link state changed to DOWN [...] tap0: link state changed to UP [...] pid 21661 (ccnet-server), jid 57, uid 900: exited on signal 11 [...] sonewconn: pcb 0xfffff80186776600: Listen queue overflow: 193 already in queue awaiting acceptance (1 occurrences)