[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p2 stable/24.7-n267758-4ad7ad40bc77 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz (2793.14-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x106e5 Family=0x6 Model=0x1e Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12442525696 (11866 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 6 5 2 7 4 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0440-0xf045e [...] smbios0: Version: 2.6, BCD Revision: 2.6 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] Firmware Warning (ACPI): Incorrect checksum in table [SSDT] - 0x3F, should be 0xFFFFFFAE (20221020/utcksum-208) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <PCI-PCI bridge> mem 0xfb900000-0xfb91ffff irq 16 at device 0.0 on pci1 [...] pci2: <PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 17 at device 1.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xfb800000-0xfb81ffff,0xfb820000-0xfb823fff irq 17 at device 0.0 on pci3 [...] em0: EEPROM V2.1-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xb000-0xb01f mem 0xfb700000-0xfb71ffff,0xfb720000-0xfb723fff irq 19 at device 0.0 on pci4 [...] em1: EEPROM V2.1-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <PCI-PCI bridge> irq 17 at device 5.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] em2: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xfb600000-0xfb61ffff,0xfb620000-0xfb623fff irq 17 at device 0.0 on pci5 [...] em2: EEPROM V2.1-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using 2 RX queues 2 TX queues [...] em2: Using MSI-X interrupts with 3 vectors [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <PCI-PCI bridge> irq 19 at device 7.0 on pci2 [...] pci6: <PCI bus> on pcib6 [...] em3: <Intel(R) Gigabit CT 82574L> port 0x9000-0x901f mem 0xfb500000-0xfb51ffff,0xfb520000-0xfb523fff irq 19 at device 0.0 on pci6 [...] em3: EEPROM V2.1-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using 2 RX queues 2 TX queues [...] em3: Using MSI-X interrupts with 3 vectors [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <PCI-PCI bridge> irq 17 at device 9.0 on pci2 [...] pci7: <PCI bus> on pcib7 [...] em4: <Intel(R) Gigabit CT 82574L> port 0x8000-0x801f mem 0xfb400000-0xfb41ffff,0xfb420000-0xfb423fff irq 17 at device 0.0 on pci7 [...] em4: EEPROM V2.1-0 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using 2 RX queues 2 TX queues [...] em4: Using MSI-X interrupts with 3 vectors [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <PCI-PCI bridge> irq 19 at device 11.0 on pci2 [...] pci8: <PCI bus> on pcib8 [...] em5: <Intel(R) Gigabit CT 82574L> port 0x7000-0x701f mem 0xfb300000-0xfb31ffff,0xfb320000-0xfb323fff irq 19 at device 0.0 on pci8 [...] em5: EEPROM V2.1-0 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using 2 RX queues 2 TX queues [...] em5: Using MSI-X interrupts with 3 vectors [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <PCI-PCI bridge> irq 17 at device 13.0 on pci2 [...] pci9: <PCI bus> on pcib9 [...] em6: <Intel(R) Gigabit CT 82574L> port 0x6000-0x601f mem 0xfb200000-0xfb21ffff,0xfb220000-0xfb223fff irq 17 at device 0.0 on pci9 [...] em6: EEPROM V2.1-0 [...] em6: Using 1024 TX descriptors and 1024 RX descriptors [...] em6: Using 2 RX queues 2 TX queues [...] em6: Using MSI-X interrupts with 3 vectors [...] em6: Ethernet address: ... [...] em6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <PCI-PCI bridge> irq 19 at device 15.0 on pci2 [...] pci10: <PCI bus> on pcib10 [...] em7: <Intel(R) Gigabit CT 82574L> port 0x5000-0x501f mem 0xfb100000-0xfb11ffff,0xfb120000-0xfb123fff irq 19 at device 0.0 on pci10 [...] em7: EEPROM V2.1-0 [...] em7: Using 1024 TX descriptors and 1024 RX descriptors [...] em7: Using 2 RX queues 2 TX queues [...] em7: Using MSI-X interrupts with 3 vectors [...] em7: Ethernet address: ... [...] em7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] pcib12: <PCI-PCI bridge> mem 0xfbb00000-0xfbb1ffff irq 16 at device 0.0 on pci11 [...] pci12: <PCI bus> on pcib12 [...] pcib13: <PCI-PCI bridge> irq 16 at device 4.0 on pci12 [...] pci13: <PCI bus> on pcib13 [...] pcib14: <PCI-PCI bridge> irq 17 at device 5.0 on pci12 [...] pcib15: <PCI-PCI bridge> irq 16 at device 8.0 on pci12 [...] pci14: <PCI bus> on pcib15 [...] pci14: <processor> at device 0.0 (no driver attached) [...] pcib16: <PCI-PCI bridge> irq 17 at device 9.0 on pci12 [...] ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfbd03000-0xfbd033ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib17: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci15: <ACPI PCI bus> on pcib17 [...] pci15: <encrypt/decrypt, network/computer crypto> at device 0.0 (no driver attached) [...] pcib18: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci16: <ACPI PCI bus> on pcib18 [...] em8: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xfbc00000-0xfbc1ffff,0xfbc20000-0xfbc23fff irq 16 at device 0.0 on pci16 [...] em8: EEPROM V2.1-0 [...] em8: Using 1024 TX descriptors and 1024 RX descriptors [...] em8: Using 2 RX queues 2 TX queues [...] em8: Using MSI-X interrupts with 3 vectors [...] em8: Ethernet address: ... [...] em8: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib19: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci17: <ACPI PCI bus> on pcib19 [...] pcib20: <PCI-PCI bridge> irq 17 at device 0.0 on pci17 [...] pci18: <PCI bus> on pcib20 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xfa800000-0xfaffffff,0xfb000000-0xfb01ffff irq 17 at device 0.0 on pci18 [...] vgapci0: Boot video device [...] ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfbd02000-0xfbd023ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib21: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci19: <ACPI PCI bus> on pcib21 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Ibex Peak AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xfbd01000-0xfbd017ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1396491284 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Netac SSD 512GB HCS1A25E> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 4096bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus0 usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.3: <Avocent USB Composite Device-0> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <Avocent USB Composite Device-0, class 0/0, rev 2.00/0.00, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device UNIGEN QAR8000S1 (0x1c79:0x3100) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device UNIGEN QAR8000S1 (0x1c79:0x3100) [...] ugen1.3: <UNIGEN QAR8000S1> at usbus1 [...] umass0 on uhub3 [...] umass0: <UNIGEN QAR8000S1, class 0/0, rev 2.00/1.00, addr 3> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:3:0: Attached to scbus3 [...] Root mount waiting for: usbus1 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <UNIGEN QAR8000S1 PMAP> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 7640MB (15646720 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] em0: link state changed to UP [...] em8: link state changed to UP [...] ichsmb0: <Intel PCH SMBus controller> port 0xf000-0xf01f mem 0xfbd00000-0xfbd000ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub2 [...] ums0: <Avocent USB Composite Device-0, class 0/0, rev 2.00/0.00, addr 3> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] ums1 on uhub2 [...] ums1: <Avocent USB Composite Device-0, class 0/0, rev 2.00/0.00, addr 3> on usbus0 [...] ums1: 3 buttons and [XYZ] coordinates ID=0 [...] lo0: link state changed to UP [...] aesni0: No AES or SHA support. [...] qat_ocf0: <QAT engine> [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] em8: link state changed to DOWN [...] vlan0: changing name to 'em8_vlan7' [...] em0: link state changed to DOWN [...] ng0: changing name to 'pppoe0' [...] em8: link state changed to UP [...] em8_vlan7: link state changed to UP [...] em0: link state changed to UP [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst 2001:7fe::53, nxt 17, rcvif em0, outif em8 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst 2001:7fe::53, nxt 17, rcvif em0, outif em8 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX::XXX, nxt 17, rcvif em0, outif em8 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX::XXX, nxt 17, rcvif em0, outif em8 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX::XXX:c15a, nxt 17, rcvif em0, outif em8 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 9m17s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p3 stable/24.7-n267802-bc5627fc5f3 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz (2793.16-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x106e5 Family=0x6 Model=0x1e Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12444405760 (11867 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 7 2 3 6 4 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0440-0xf045e [...] smbios0: Version: 2.6, BCD Revision: 2.6 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] Firmware Warning (ACPI): Incorrect checksum in table [SSDT] - 0x3F, should be 0xFFFFFFAE (20221020/utcksum-208) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <PCI-PCI bridge> mem 0xfb900000-0xfb91ffff irq 16 at device 0.0 on pci1 [...] pci2: <PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 17 at device 1.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xfb800000-0xfb81ffff,0xfb820000-0xfb823fff irq 17 at device 0.0 on pci3 [...] em0: EEPROM V2.1-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xb000-0xb01f mem 0xfb700000-0xfb71ffff,0xfb720000-0xfb723fff irq 19 at device 0.0 on pci4 [...] em1: EEPROM V2.1-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <PCI-PCI bridge> irq 17 at device 5.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] em2: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xfb600000-0xfb61ffff,0xfb620000-0xfb623fff irq 17 at device 0.0 on pci5 [...] em2: EEPROM V2.1-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using 2 RX queues 2 TX queues [...] em2: Using MSI-X interrupts with 3 vectors [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <PCI-PCI bridge> irq 19 at device 7.0 on pci2 [...] pci6: <PCI bus> on pcib6 [...] em3: <Intel(R) Gigabit CT 82574L> port 0x9000-0x901f mem 0xfb500000-0xfb51ffff,0xfb520000-0xfb523fff irq 19 at device 0.0 on pci6 [...] em3: EEPROM V2.1-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using 2 RX queues 2 TX queues [...] em3: Using MSI-X interrupts with 3 vectors [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <PCI-PCI bridge> irq 17 at device 9.0 on pci2 [...] pci7: <PCI bus> on pcib7 [...] em4: <Intel(R) Gigabit CT 82574L> port 0x8000-0x801f mem 0xfb400000-0xfb41ffff,0xfb420000-0xfb423fff irq 17 at device 0.0 on pci7 [...] em4: EEPROM V2.1-0 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using 2 RX queues 2 TX queues [...] em4: Using MSI-X interrupts with 3 vectors [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <PCI-PCI bridge> irq 19 at device 11.0 on pci2 [...] pci8: <PCI bus> on pcib8 [...] em5: <Intel(R) Gigabit CT 82574L> port 0x7000-0x701f mem 0xfb300000-0xfb31ffff,0xfb320000-0xfb323fff irq 19 at device 0.0 on pci8 [...] em5: EEPROM V2.1-0 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using 2 RX queues 2 TX queues [...] em5: Using MSI-X interrupts with 3 vectors [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <PCI-PCI bridge> irq 17 at device 13.0 on pci2 [...] pci9: <PCI bus> on pcib9 [...] em6: <Intel(R) Gigabit CT 82574L> port 0x6000-0x601f mem 0xfb200000-0xfb21ffff,0xfb220000-0xfb223fff irq 17 at device 0.0 on pci9 [...] em6: EEPROM V2.1-0 [...] em6: Using 1024 TX descriptors and 1024 RX descriptors [...] em6: Using 2 RX queues 2 TX queues [...] em6: Using MSI-X interrupts with 3 vectors [...] em6: Ethernet address: ... [...] em6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <PCI-PCI bridge> irq 19 at device 15.0 on pci2 [...] pci10: <PCI bus> on pcib10 [...] em7: <Intel(R) Gigabit CT 82574L> port 0x5000-0x501f mem 0xfb100000-0xfb11ffff,0xfb120000-0xfb123fff irq 19 at device 0.0 on pci10 [...] em7: EEPROM V2.1-0 [...] em7: Using 1024 TX descriptors and 1024 RX descriptors [...] em7: Using 2 RX queues 2 TX queues [...] em7: Using MSI-X interrupts with 3 vectors [...] em7: Ethernet address: ... [...] em7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] pcib12: <PCI-PCI bridge> mem 0xfbb00000-0xfbb1ffff irq 16 at device 0.0 on pci11 [...] pci12: <PCI bus> on pcib12 [...] pcib13: <PCI-PCI bridge> irq 16 at device 4.0 on pci12 [...] pci13: <PCI bus> on pcib13 [...] pcib14: <PCI-PCI bridge> irq 17 at device 5.0 on pci12 [...] pcib15: <PCI-PCI bridge> irq 16 at device 8.0 on pci12 [...] pci14: <PCI bus> on pcib15 [...] pci14: <processor> at device 0.0 (no driver attached) [...] pcib16: <PCI-PCI bridge> irq 17 at device 9.0 on pci12 [...] ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfbd03000-0xfbd033ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib17: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci15: <ACPI PCI bus> on pcib17 [...] pci15: <encrypt/decrypt, network/computer crypto> at device 0.0 (no driver attached) [...] pcib18: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci16: <ACPI PCI bus> on pcib18 [...] em8: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xfbc00000-0xfbc1ffff,0xfbc20000-0xfbc23fff irq 16 at device 0.0 on pci16 [...] em8: EEPROM V2.1-0 [...] em8: Using 1024 TX descriptors and 1024 RX descriptors [...] em8: Using 2 RX queues 2 TX queues [...] em8: Using MSI-X interrupts with 3 vectors [...] em8: Ethernet address: ... [...] em8: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib19: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci17: <ACPI PCI bus> on pcib19 [...] pcib20: <PCI-PCI bridge> irq 17 at device 0.0 on pci17 [...] pci18: <PCI bus> on pcib20 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xfa800000-0xfaffffff,0xfb000000-0xfb01ffff irq 17 at device 0.0 on pci18 [...] vgapci0: Boot video device [...] ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfbd02000-0xfbd023ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib21: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci19: <ACPI PCI bus> on pcib21 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Ibex Peak AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xfbd01000-0xfbd017ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1396491249 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Netac SSD 512GB HCS1A25E> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 4096bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] Root mount waiting for: usbus0 usbus1 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.3: <Avocent USB Composite Device-0> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <Avocent USB Composite Device-0, class 0/0, rev 2.00/0.00, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device UNIGEN QAR8000S1 (0x1c79:0x3100) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device UNIGEN QAR8000S1 (0x1c79:0x3100) [...] ugen1.3: <UNIGEN QAR8000S1> at usbus1 [...] umass0 on uhub2 [...] umass0: <UNIGEN QAR8000S1, class 0/0, rev 2.00/1.00, addr 3> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:3:0: Attached to scbus3 [...] Root mount waiting for: usbus1 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <UNIGEN QAR8000S1 PMAP> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 7640MB (15646720 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE>