[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p2 stable/23.7-n254761-4b4f06e3731 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz (2400.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33231929344 (31692 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs [...] FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 1 21 22 6 18 15 17 12 7 4 3 5 9 23 19 14 13 10 8 16 20 2 11 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfe300-0xfe31e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pcib1: <ACPI Host-PCI bridge> on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Invader> port 0x3000-0x30ff mem 0x92400000-0x9240ffff,0x92300000-0x923fffff irq 26 at device 0.0 numa-domain 0 on pci3 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 928, limiting to 128 [...] mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 [...] mfi0: 5605 (747543858s/0x0020/info) - Shutdown command received from host [...] mfi0: 5606 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f49/1028) [...] mfi0: 5607 (boot + 10s/0x0020/info) - Firmware version 4.300.00-8368 [...] mfi0: 5608 (boot + 12s/0x0008/info) - Battery Present [...] mfi0: 5609 (boot + 12s/0x0020/info) - Package version XXX.XXX.XXX.XXX [...] mfi0: 5610 (boot + 12s/0x0020/info) - Board Revision A09 [...] mfi0: 5611 (boot + 16s/0x0008/info) - Battery temperature is normal [...] mfi0: 5612 (boot + 16s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 5613 (boot + 28s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored [...] mfi0: 5614 (boot + 28s/0x0002/info) - Inserted: Encl PD 20 [...] pcib4: <ACPI PCI-PCI bridge>mfi0: 5615 (boot + 28s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5e0940603dc83 irq 47 at device 2.0 numa-domain 0 on pci2 [...] pci4: <ACPI PCI bus>200,0000000000000000 [...] mfi0: 5616 (boot + 28s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] numa-domain 0 on pcib4 [...] mfi0: 5617 (boot + 28s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=4433221104000000,0000000000000000 [...] mfi0: 5618 (boot + 28s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive [...] mfi0: 5619 (boot + 28s/0x0002/info) - Inserted: PD 01(e0x20/s1) [...] mfi0: 5620 (boot + 28s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=4433221100000000,0000000000000000 [...] mfi0: 5621 (boot + 28s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive [...] mfi0: 5622 (boot + 28s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 4433221100000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] igb0: <Intel(R) I350 (Copper)>mfi0: 5623 (boot + 28s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 4433221100000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5624 (boot + 28s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5625 (boot + 28s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 4433221100000000, CDB: b5 02 07 fe 80 00 00 00 00 mem 0x92100000-0x921fffff,0x9220c000-0x9220ffff irq 32 at device 0.0 numa-domain 0 on pci4 [...] 01 00 00, Sense: b/00/00 [...] mfi0: 5626 (boot + 28s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5627 (boot + 28s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 4433221100000000, CDB: b5 02 07 fe 80 00 00 00 00 igb0: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] 01 00 00, Sense: b/00/00 [...] mfi0: 5628 (boot + 28s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5629 (boot + 28s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 4433221100000000, CDB: b5 02 07 fe 80 00 00 00 00 igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] 01 00 00, Sense: b/00/00 [...] mfi0: 5630 (boot + 28s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: b5 02 07 fe 80 00 00 00 00 igb0: Using 6 RX queues 6 TX queues [...] 01 00 00, Sense: b/00/00 [...] mfi0: 5631 (boot + 28s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 4433221100000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5632 (boot + 28s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5633 (boot + 28s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: b5 02 07 fe 80 00 00 00 00 igb0: Using MSI-X interrupts with 7 vectors [...] 01 00 00, Sense: b/00/00 [...] mfi0: 5634 (boot + 28s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] mfi0: 5635 (boot + 28s/0x0020/info) - Patrol Read resumed [...] mfi0: 5636 (747543896s/0x0020/info) - Time established as 09/09/23 3:04:56; (28 seconds since power on) [...] igb0: Ethernet address: ... [...] mfi0: 5637 (747543898s/0x0020/info) - Patrol Read complete [...] mfi0: 5638 (747543960s/0x0020/info) - Host driver is loaded and operational [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0x92000000-0x920fffff,0x92208000-0x9220bfff irq 36 at device 0.1 numa-domain 0 on pci4 [...] igb1: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0x91f00000-0x91ffffff,0x92204000-0x92207fff irq 37 at device 0.2 numa-domain 0 on pci4 [...] igb2: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 6 RX queues 6 TX queues [...] igb2: Using MSI-X interrupts with 7 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0x91e00000-0x91efffff,0x92200000-0x92203fff irq 38 at device 0.3 numa-domain 0 on pci4 [...] igb3: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 6 RX queues 6 TX queues [...] igb3: Using MSI-X interrupts with 7 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 47 at device 3.0 numa-domain 0 on pci2 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.1 numa-domain 0 on pci2 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci2 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x2020-0x203f mem 0x91c80000-0x91cfffff,0x91d04000-0x91d07fff irq 42 at device 0.0 numa-domain 0 on pci7 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 6 RX queues 6 TX queues [...] ix0: Using MSI-X interrupts with 7 vectors [...] ix0: allocated for 6 queues [...] ix0: allocated for 6 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x000161ae PHY FW V65535 [...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x2000-0x201f mem 0x91c00000-0x91c7ffff,0x91d00000-0x91d03fff irq 45 at device 0.1 numa-domain 0 on pci7 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 6 RX queues 6 TX queues [...] ix1: Using MSI-X interrupts with 7 vectors [...] ix1: allocated for 6 queues [...] ix1: allocated for 6 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x000161ae PHY FW V65535 [...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048 [...] pci2: <unknown> at device 17.0 (no driver attached) [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0x4078-0x407f,0x408c-0x408f,0x4070-0x4077,0x4088-0x408b,0x4040-0x405f mem 0x92501000-0x925017ff irq 16 at device 17.4 numa-domain 0 on pci2 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pci2: <simple comms> at device 22.0 (no driver attached) [...] pci2: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x92503000-0x925033ff irq 18 at device 26.0 numa-domain 0 on pci2 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib8: <PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2 [...] pci8: <PCI bus> numa-domain 0 on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci2 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9 [...] pci10: <PCI bus> numa-domain 0 on pcib10 [...] pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10 [...] pci11: <PCI bus> numa-domain 0 on pcib11 [...] pcib12: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci11 [...] pci12: <PCI bus> numa-domain 0 on pcib12 [...] vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 19 at device 0.0 numa-domain 0 on pci12 [...] vgapci0: Boot video device [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x92502000-0x925023ff irq 18 at device 29.0 numa-domain 0 on pci2 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci1: <Intel Wellsburg AHCI SATA controller> port 0x4068-0x406f,0x4084-0x4087,0x4060-0x4067,0x4080-0x4083,0x4020-0x403f mem 0x92500000-0x925007ff irq 16 at device 31.2 numa-domain 0 on pci2 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahcich7: <AHCI channel> at channel 3 on ahci1 [...] ahcich8: <AHCI channel> at channel 4 on ahci1 [...] ahcich9: <AHCI channel> at channel 5 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] pcib13: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci13: <ACPI PCI bus> numa-domain 1 on pcib13 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcf7ff,0xed800-0xf17ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a7800001800 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a7800001800 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a7800001800 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a7800001800 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est15 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est16 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est17 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a7800001800 [...] device_attach: est18 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a7800001800 [...] device_attach: est19 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a7800001800 [...] device_attach: est20 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est21 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a7800001800 [...] device_attach: est22 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1aa000001800 [...] device_attach: est23 attach returned 6 [...] Timecounter "TSC-low" frequency 1199998036 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 numa-domain 0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 numa-domain 0 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] mfid0 numa-domain 0 on mfi0 [...] mfid0: 476416MB (975699968 sectors) RAID volume 'OPNsense SSD' is optimal [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x8002> at usbus1 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x800a> at usbus0 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] ugen0.3: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub4 numa-domain 0 on uhub3 [...] uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0 [...] ugen1.3: <vendor 0x0d3d USB CAT5> at usbus1 [...] ukbd0 numa-domain 0 on uhub2 [...] ukbd0: <EP1> on usbus1 [...] kbd2 at ukbd0 [...] uhub4: 6 ports with 6 removable, self powered