[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif igb1, outif wg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif igb1, outif wg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif igb1, outif wg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX::XXX, nxt 6, rcvif igb1, outif wg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb1, outif wg0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 36d3h3m22s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p3 stable/24.7-n267778-bb2c86773c1b SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-9700T CPU @ 2.00GHz (2000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ed Family=0x6 Model=0x9e Stepping=13 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33086402560 (31553 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <Shuttl Shuttle > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 3 7 4 6 1 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x7fac7000-0x7fac701e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <Shuttl Shuttle> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x8c500000-0x8c503fff irq 16 at device 0.0 on pci1 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x8b000000-0x8bffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x8c600000-0x8c60ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0x8c614000-0x8c615fff,0x8c61a000-0x8c61a0ff,0x8c619000-0x8c6197ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I211 (Copper)> port 0x4000-0x401f mem 0x8c400000-0x8c41ffff,0x8c420000-0x8c423fff irq 16 at device 0.0 on pci2 [...] igb0: NVM V0.6 imgtype2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb1: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0x8c300000-0x8c31ffff,0x8c320000-0x8c323fff irq 17 at device 0.0 on pci3 [...] igb1: NVM V0.6 imgtype2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci4: <network> at device 0.0 (no driver attached) [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pci5: <unknown> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0x8c610000-0x8c613fff,0x8c000000-0x8c0fffff irq 16 at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC" frequency 1991998874 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] nvme0: Allocated 64MB host memory buffer [...] hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev3 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm1: <Realtek ALC662 rev3 (Internal Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] nda0 at nvme0 bus 0 scbus2 target 0 lun 1 [...] nda0: <SPCC M.2 PCIe SSD EHFMC0.0 A21E073B167C00024498> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 20 ports with 20 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <CPS UPS OR700> at usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0032> at usbus0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 34s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p3 stable/24.7-n267778-bb2c86773c1b SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-9700T CPU @ 2.00GHz (2000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ed Family=0x6 Model=0x9e Stepping=13 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33086402560 (31553 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <Shuttl Shuttle > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 3 6 4 7 1 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x7fac7000-0x7fac701e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <Shuttl Shuttle> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x8c500000-0x8c503fff irq 16 at device 0.0 on pci1 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x8b000000-0x8bffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x8c600000-0x8c60ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0x8c614000-0x8c615fff,0x8c61a000-0x8c61a0ff,0x8c619000-0x8c6197ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I211 (Copper)> port 0x4000-0x401f mem 0x8c400000-0x8c41ffff,0x8c420000-0x8c423fff irq 16 at device 0.0 on pci2 [...] igb0: NVM V0.6 imgtype2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb1: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0x8c300000-0x8c31ffff,0x8c320000-0x8c323fff irq 17 at device 0.0 on pci3 [...] igb1: NVM V0.6 imgtype2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci4: <network> at device 0.0 (no driver attached) [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pci5: <unknown> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0x8c610000-0x8c613fff,0x8c000000-0x8c0fffff irq 16 at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC" frequency 1991998909 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvme0: Allocated 64MB host memory buffer [...] hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev3 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm1: <Realtek ALC662 rev3 (Internal Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] nda0 at nvme0 bus 0 scbus2 target 0 lun 1 [...] nda0: <SPCC M.2 PCIe SSD EHFMC0.0 A21E073B167C00024498> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 20 ports with 20 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <CPS UPS OR700> at usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0032> at usbus0 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 1m18s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p3 stable/24.7-n267778-bb2c86773c1b SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-9700T CPU @ 2.00GHz (2000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ed Family=0x6 Model=0x9e Stepping=13 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33086406656 (31553 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <Shuttl Shuttle > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 3 6 1 7 4 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x7fac7000-0x7fac701e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <Shuttl Shuttle> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x8c500000-0x8c503fff irq 16 at device 0.0 on pci1 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x8b000000-0x8bffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x8c600000-0x8c60ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0x8c614000-0x8c615fff,0x8c61a000-0x8c61a0ff,0x8c619000-0x8c6197ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I211 (Copper)> port 0x4000-0x401f mem 0x8c400000-0x8c41ffff,0x8c420000-0x8c423fff irq 16 at device 0.0 on pci2 [...] igb0: NVM V0.6 imgtype2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb1: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0x8c300000-0x8c31ffff,0x8c320000-0x8c323fff irq 17 at device 0.0 on pci3 [...] igb1: NVM V0.6 imgtype2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci4: <network> at device 0.0 (no driver attached) [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pci5: <unknown> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0x8c610000-0x8c613fff,0x8c000000-0x8c0fffff irq 16 at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC" frequency 1991998260 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvme0: Allocated 64MB host memory buffer [...] hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev3 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm1: <Realtek ALC662 rev3 (Internal Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] nda0 at nvme0 bus 0 scbus2 target 0 lun 1 [...] nda0: <SPCC M.2 PCIe SSD EHFMC0.0 A21E073B167C00024498> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 20 ports with 20 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <CPS UPS OR700> at usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0032> at usbus0