[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p2 stable/22.7-n250229-c8a7fd0d5dc SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E3-1275L v3 @ 2.70GHz (2699.28-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16303104000 (15547 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 4 6 3 7 5 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X520 82599 (Dual SFP+)> port 0xe020-0xe03f mem 0xef500000-0xef5fffff,0xef704000-0xef707fff irq 16 at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: Option ROM V19-b0-p12 eTrack 0x8000095d PHY FW V65535 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X520 82599 (Dual SFP+)> port 0xe000-0xe01f mem 0xef400000-0xef4fffff,0xef700000-0xef703fff irq 17 at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: Option ROM V19-b0-p12 eTrack 0x8000095d PHY FW V65535 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network, ethernet> at device 0.0 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xeec00000-0xeeffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xefe34000-0xefe37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Wildcat Point USB 3.0 controller> mem 0xefe20000-0xefe2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) I218-V (2)> port 0xf080-0xf09f mem 0xefe00000-0xefe1ffff,0xefe3c000-0xefe3cfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.1-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Wildcat Point USB 2.0 controller USB-B> mem 0xefe3b000-0xefe3b3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Wildcat Point HDA Controller> mem 0xefe30000-0xefe33fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 1.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> irq 17 at device 3.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] alc0: <Killer E2200 Gigabit Ethernet> port 0xb000-0xb07f mem 0xefa00000-0xefa3ffff irq 17 at device 0.0 on pci7 [...] alc0: 11776 Tx FIFO, 12032 Rx FIFO [...] alc0: Using 1 MSIX message(s). [...] miibus0: <MII bus> on alc0 [...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 [...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] alc0: Using defaults for TSO: 65518/35/2048 [...] alc0: Ethernet address: ... [...] pcib8: <PCI-PCI bridge> irq 19 at device 5.0 on pci5 [...] pci8: <PCI bus> on pcib8 [...] re0: <Realtek PCIe 2.5GbE Family Controller> port 0xa000-0xa0ff mem 0xef910000-0xef91ffff,0xef920000-0xef923fff irq 19 at device 0.0 on pci8 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib9: <PCI-PCI bridge> irq 17 at device 7.0 on pci5 [...] pci9: <PCI bus> on pcib9 [...] re1: <Realtek PCIe 2.5GbE Family Controller> port 0x9000-0x90ff mem 0xef810000-0xef81ffff,0xef820000-0xef823fff irq 17 at device 0.0 on pci9 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: version:1.96.04 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Ethernet address: ... [...] pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xefd00000-0xefd001ff irq 19 at device 0.0 on pci10 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ix2: <Intel(R) X520 82599 (Dual SFP+)> port 0xc020-0xc03f mem 0xef100000-0xef1fffff,0xef304000-0xef307fff irq 16 at device 0.0 on pci11 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 4 RX queues 4 TX queues [...] ix2: Using MSI-X interrupts with 5 vectors [...] ix2: allocated for 4 queues [...] ix2: allocated for 4 rx queues [...] ix2: Ethernet address: ... [...] ix2: PCI Express Bus: Speed 5.0GT/s Width x4 [...] ix2: Option ROM V18-b8-p9 eTrack 0x8000095d PHY FW V65535 [...] ix2: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix3: <Intel(R) X520 82599 (Dual SFP+)> port 0xc000-0xc01f mem 0xef000000-0xef0fffff,0xef300000-0xef303fff irq 17 at device 0.1 on pci11 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 4 RX queues 4 TX queues [...] ix3: Using MSI-X interrupts with 5 vectors [...] ix3: allocated for 4 queues [...] ix3: allocated for 4 rx queues [...] ix3: Ethernet address: ... [...] ix3: PCI Express Bus: Speed 5.0GT/s Width x4 [...] ix3: Option ROM V18-b8-p9 eTrack 0x8000095d PHY FW V65535 [...] ix3: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ehci1: <Intel Wildcat Point USB 2.0 controller USB-A> mem 0xefe3a000-0xefe3a3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci1: <Intel Wildcat Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xefe39000-0xefe397ff irq 19 at device 31.2 on pci0 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 2 on ahci1 [...] ahciem0: <AHCI enclosure management bridge> on ahci1 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xd2800-0xd37ff,0xd3800-0xd47ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1349608185 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Creative CA0132 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Creative CA0132 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Creative CA0132 (Analog)> at nid 11 and 17 on hdaa1 [...] pcm2: <Creative CA0132 (Rear Digital)> at nid 12 on hdaa1 [...] pcm3: <Creative CA0132 (Front Analog)> at nid 16 and 18 on hdaa1 [...] mlx4_core0: <mlx4_core> mem 0xefc00000-0xefcfffff,0xe0000000-0xe07fffff irq 17 at device 0.0 on pci2 [...] mlx4_core: Mellanox ConnectX core driver v3.7.1 (November 2021) [...] mlx4_core: Initializing mlx4_core [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada0: <SanDisk SD8TB8U256G1001 X4133101> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0: ada0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] mlx4_core0: Unable to determine PCI device chain minimum BW [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] mlx4_en mlx4_core0: Activating port:1 [...] mlxen0: Ethernet address: ... [...] mlx4_en: mlx4_core0: Port 1: Using 8 TX rings [...] mlxen0: link state changed to DOWN [...] mlx4_en: mlx4_core0: Port 1: Using 8 RX rings [...] mlx4_en: mlxen0: Using 8 TX rings [...] mlx4_en: mlxen0: Using 8 RX rings [...] mlx4_en: mlxen0: Initializing port [...] mlx4_en mlx4_core0: Activating port:2 [...] mlxen1: Ethernet address: ... [...] mlx4_en: mlx4_core0: Port 2: Using 8 TX rings [...] mlxen1: link state changed to DOWN [...] mlx4_en: mlx4_core0: Port 2: Using 8 RX rings [...] mlx4_en: mlxen1: Using 8 TX rings [...] mlx4_en: mlxen1: Using 8 RX rings [...] mlx4_en: mlxen1: Initializing port [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw,noatime]... [...] uhub2: 21 ports with 21 removable, self powered [...] ugen0.2: <ASRock ASM107x> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <ASRock ASM107x, class 9/0, rev 2.10/1.00, addr 1> on usbus0 [...] uhub3: MTT enabled [...] ugen2.2: <vendor 0x8087 product 0x8001> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8009> at usbus1 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> on usbus1