[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p4 stable/25.7-n271708-85edba454cf9 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 1024x768 [...] [1] Setting sysctl vfs.zfs.arc.min failed: 22 [...] [1] Setting sysctl vfs.zfs.arc.max failed: 22 [...] [1] CPU microcode: no matching update found [...] [1] CPU: Intel(R) Xeon(R) D-2146NT CPU @ 2.30GHz (2300.00-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x50654 Family=0x6 Model=0x55 Stepping=4 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] [1] Structured Extended Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL> [...] [1] Structured Extended Features2=0x18<PKU,OSPKE> [...] [1] Structured Extended Features3=0xbc002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] IA32_ARCH_CAPS=0x2000c04<RSBA> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 137434759168 (131068 MB) [...] [1] avail memory = 133384081408 (127204 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <SUPERM SMCI--MB> [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-23 [...] [1] ioapic1 <Version 2.0> irqs 24-31 [...] [1] ioapic2 <Version 2.0> irqs 32-39 [...] [1] ioapic3 <Version 2.0> irqs 40-47 [...] [1] ioapic4 <Version 2.0> irqs 48-55 [...] [1] Launching APs: 1 9 12 10 13 4 11 5 6 2 3 7 8 14 15 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0x6e7cd000-0x6e7cd017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.1 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] [1] acpi0: <SUPERM SUPERM> [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] [1] Event timer "HPET" frequency 24000000 Hz quality 350 [...] [1] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] [1] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] [1] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] [1] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] [1] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] [1] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] [1] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] [1] hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] device_attach: hpet1 attach returned 12 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] [1] acpi_syscontainer0: <System Container> on acpi0 [...] [1] apei0: <ACPI Platform Error Interface> on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] [1] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] [1] pci0: <dasp, performance counters> at device 8.1 (no driver attached) [...] [1] pci0: <unknown> at device 17.0 (no driver attached) [...] [1] ahci0: <Intel Lewisburg AHCI SATA controller> port 0x3070-0x3077,0x3060-0x3063,0x3020-0x303f mem 0xaa216000-0xaa217fff,0xaa219000-0xaa2190ff,0xaa180000-0xaa1fffff irq 16 at device 17.5 numa-domain 0 on pci0 [...] [1] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] [1] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] [1] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] [1] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] [1] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] [1] xhci0: <Intel Lewisburg USB 3.0 controller> mem 0xaa200000-0xaa20ffff irq 16 at device 20.0 numa-domain 0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0: waiting for BIOS to give up control [...] [1] xhci_interrupt: host controller halted [...] [1] usbus0 numa-domain 0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] pci0: <simple comms> at device 22.1 (no driver attached) [...] [1] pci0: <simple comms> at device 22.4 (no driver attached) [...] [1] ahci1: <Intel Lewisburg AHCI SATA controller> port 0x3050-0x3057,0x3040-0x3043,0x3000-0x301f mem 0xaa214000-0xaa215fff,0xaa218000-0xaa2180ff,0xaa100000-0xaa17ffff irq 16 at device 23.0 numa-domain 0 on pci0 [...] [1] ahci1: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported [...] [1] ahcich6: <AHCI channel> at channel 0 on ahci1 [...] [1] ahcich7: <AHCI channel> at channel 1 on ahci1 [...] [1] ahcich8: <AHCI channel> at channel 2 on ahci1 [...] [1] ahcich9: <AHCI channel> at channel 3 on ahci1 [...] [1] ahcich10: <AHCI channel> at channel 4 on ahci1 [...] [1] ahcich11: <AHCI channel> at channel 5 on ahci1 [...] [1] ahcich12: <AHCI channel> at channel 6 on ahci1 [...] [1] ahcich13: <AHCI channel> at channel 7 on ahci1 [...] [1] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci0 [...] [1] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0 [...] [1] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 numa-domain 0 on pci2 [...] [1] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] [1] vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xa9000000-0xa9ffffff,0xaa000000-0xaa01ffff irq 16 at device 0.0 numa-domain 0 on pci3 [...] [1] vgapci0: Boot video device [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 29.0 numa-domain 0 on pci0 [...] [1] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] [1] isa0: <ISA bus> numa-domain 0 on isab0 [...] [1] pci0: <memory> at device 31.2 (no driver attached) [...] [1] pci0: <serial bus> at device 31.5 (no driver attached) [...] [1] pcib5: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] [1] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] [1] pcib6: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] [1] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] [1] pcib7: <ACPI PCI-PCI bridge> irq 47 at device 0.0 numa-domain 0 on pci6 [...] [1] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] [1] ppt0 mem 0xe0e00000-0xe0e07fff irq 40 at device 0.0 numa-domain 0 on pci7 [...] [1] pcib8: <ACPI PCI-PCI bridge> irq 47 at device 2.0 numa-domain 0 on pci6 [...] [1] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] [1] nvme0: <Generic NVMe Device> mem 0xe0d00000-0xe0d03fff irq 42 at device 0.0 numa-domain 0 on pci8 [...] [1] pcib9: <ACPI PCI-PCI bridge> irq 47 at device 3.0 numa-domain 0 on pci6 [...] [1] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] [1] igb0: <Intel(R) I350 (Copper)> port 0xb060-0xb07f mem 0xe0c60000-0xe0c7ffff,0xe0c8c000-0xe0c8ffff irq 43 at device 0.0 numa-domain 0 on pci9 [...] [1] igb0: EEPROM V1.63-0 eTrack 0x800009fa [...] [1] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb0: Using 8 RX queues 8 TX queues [...] [1] igb0: Using MSI-X interrupts with 9 vectors [...] [1] igb0: Ethernet address: ... [...] [1] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] igb1: <Intel(R) I350 (Copper)> port 0xb040-0xb05f mem 0xe0c40000-0xe0c5ffff,0xe0c88000-0xe0c8bfff irq 46 at device 0.1 numa-domain 0 on pci9 [...] [1] igb1: EEPROM V1.63-0 eTrack 0x800009fa [...] [1] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb1: Using 8 RX queues 8 TX queues [...] [1] igb1: Using MSI-X interrupts with 9 vectors [...] [1] igb1: Ethernet address: ... [...] [1] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] igb2: <Intel(R) I350 (Copper)> port 0xb020-0xb03f mem 0xe0c20000-0xe0c3ffff,0xe0c84000-0xe0c87fff irq 44 at device 0.2 numa-domain 0 on pci9 [...] [1] igb2: EEPROM V1.63-0 eTrack 0x800009fa [...] [1] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb2: Using 8 RX queues 8 TX queues [...] [1] igb2: Using MSI-X interrupts with 9 vectors [...] [1] igb2: Ethernet address: ... [...] [1] igb2: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] igb3: <Intel(R) I350 (Copper)> port 0xb000-0xb01f mem 0xe0c00000-0xe0c1ffff,0xe0c80000-0xe0c83fff irq 45 at device 0.3 numa-domain 0 on pci9 [...] [1] igb3: EEPROM V1.63-0 eTrack 0x800009fa [...] [1] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb3: Using 8 RX queues 8 TX queues [...] [1] igb3: Using MSI-X interrupts with 9 vectors [...] [1] igb3: Ethernet address: ... [...] [1] igb3: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] pcib10: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] [1] pci10: <ACPI PCI bus> numa-domain 0 on pcib10 [...] [1] pcib11: <ACPI PCI-PCI bridge> irq 55 at device 0.0 numa-domain 0 on pci10 [...] [1] pci11: <ACPI PCI bus> numa-domain 0 on pcib11 [...] [1] pcib12: <ACPI PCI-PCI bridge> mem 0xfbe00000-0xfbe1ffff irq 48 at device 0.0 numa-domain 0 on pci11 [...] [1] pci12: <ACPI PCI bus> numa-domain 0 on pcib12 [...] [1] pcib13: <ACPI PCI-PCI bridge> irq 40 at device 0.0 numa-domain 0 on pci12 [...] [1] pci13: <ACPI PCI bus> numa-domain 0 on pcib13 [...] [1] pci13: <processor> at device 0.0 (no driver attached) [...] [1] pcib14: <ACPI PCI-PCI bridge> irq 40 at device 2.0 numa-domain 0 on pci12 [...] [1] pci14: <ACPI PCI bus> numa-domain 0 on pcib14 [...] [1] pci14: <processor> at device 0.0 (no driver attached) [...] [1] pcib15: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci12 [...] [1] pci15: <ACPI PCI bus> numa-domain 0 on pcib15 [...] [1] ixl0: <Intel(R) Ethernet Connection X722 for 10GBASE-T - 2.3.3-k> mem 0xf9000000-0xf9ffffff,0xfb018000-0xfb01ffff irq 46 at device 0.0 numa-domain 0 on pci15 [...] [1] ixl0: fw 5.5.67510 api 1.12 nvm 5.50 etid 80003351 oem 1.268.0 [...] [1] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] [1] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] ixl0: Using 8 RX queues 8 TX queues [...] [1] ixl0: Using MSI-X interrupts with 9 vectors [...] [1] ixl0: Ethernet address: ... [...] [1] ixl0: Allocating 8 queues for PF LAN VSI; 8 queues active [...] [1] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: None [...] [1] ixl0: link state changed to UP [...] [1] ixl0: SR-IOV ready [...] [1] ixl0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] ixl0: link state changed to DOWN [...] [1] ixl1: <Intel(R) Ethernet Connection X722 for 10GBASE-T - 2.3.3-k> mem 0xf8000000-0xf8ffffff,0xfb010000-0xfb017fff irq 46 at device 0.1 numa-domain 0 on pci15 [...] [1] ixl1: fw 5.5.67510 api 1.12 nvm 5.50 etid 80003351 oem 1.268.0 [...] [1] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] [1] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] ixl1: Using 8 RX queues 8 TX queues [...] [1] ixl1: Using MSI-X interrupts with 9 vectors [...] [1] ixl1: Ethernet address: ... [...] [1] ixl1: Allocating 8 queues for PF LAN VSI; 8 queues active [...] [1] ixl1: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: None [...] [1] ixl1: link state changed to UP [...] [1] ixl1: SR-IOV ready [...] [1] ixl1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] ixl1: link state changed to DOWN [...] [1] ixl2: <Intel(R) Ethernet Connection X722 for 10GbE SFP+ - 2.3.3-k> mem 0xf7000000-0xf7ffffff,0xfb008000-0xfb00ffff irq 46 at device 0.2 numa-domain 0 on pci15 [...] [1] ixl2: fw 5.5.67510 api 1.12 nvm 5.50 etid 80003351 oem 1.268.0 [...] [1] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] [1] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] ixl2: Using 8 RX queues 8 TX queues [...] [1] ixl2: Using MSI-X interrupts with 9 vectors [...] [1] ixl2: Ethernet address: ... [...] [1] ixl2: Allocating 8 queues for PF LAN VSI; 8 queues active [...] [1] ixl2: SR-IOV ready [...] [1] ixl2: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] ixl3: <Intel(R) Ethernet Connection X722 for 10GbE SFP+ - 2.3.3-k> mem 0xf6000000-0xf6ffffff,0xfb000000-0xfb007fff irq 46 at device 0.3 numa-domain 0 on pci15 [...] [1] ixl3: fw 5.5.67510 api 1.12 nvm 5.50 etid 80003351 oem 1.268.0 [...] [1] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] [1] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] ixl3: Using 8 RX queues 8 TX queues [...] [1] ixl3: Using MSI-X interrupts with 9 vectors [...] [1] ixl3: Ethernet address: ... [...] [1] ixl3: Allocating 8 queues for PF LAN VSI; 8 queues active [...] [1] ixl3: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] [1] ixl3: link state changed to UP [...] [1] ixl3: SR-IOV ready [...] [1] ixl3: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] pci10: <dasp, performance counters> at device 18.0 (no driver attached) [...] [1] ixl3: link state changed to DOWN [...] [1] pci10: <dasp, performance counters> at device 18.1 (no driver attached) [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] uart0: console (115200,n,8,1) [...] [1] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] [1] orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 [...] [1] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] [1] cpufreq0: <CPU frequency control> numa-domain 0 on cpu0 [...] [1] cpufreq1: <CPU frequency control> numa-domain 0 on cpu1 [...] [1] cpufreq2: <CPU frequency control> numa-domain 0 on cpu2 [...] [1] cpufreq3: <CPU frequency control> numa-domain 0 on cpu3 [...] [1] cpufreq4: <CPU frequency control> numa-domain 0 on cpu4 [...] [1] cpufreq5: <CPU frequency control> numa-domain 0 on cpu5 [...] [1] cpufreq6: <CPU frequency control> numa-domain 0 on cpu6 [...] [1] cpufreq7: <CPU frequency control> numa-domain 0 on cpu7 [...] [1] cpufreq8: <CPU frequency control> numa-domain 0 on cpu8 [...] [1] cpufreq9: <CPU frequency control> numa-domain 0 on cpu9 [...] [1] cpufreq10: <CPU frequency control> numa-domain 0 on cpu10 [...] [1] cpufreq11: <CPU frequency control> numa-domain 0 on cpu11 [...] [1] cpufreq12: <CPU frequency control> numa-domain 0 on cpu12 [...] [1] cpufreq13: <CPU frequency control> numa-domain 0 on cpu13 [...] [1] cpufreq14: <CPU frequency control> numa-domain 0 on cpu14 [...] [1] cpufreq15: <CPU frequency control> numa-domain 0 on cpu15 [...] [1] Timecounter "TSC-low" frequency 1147304467 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] ixl2: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] [1] ixl2: link state changed to UP [...] [1] ixl3: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] [1] ixl3: link state changed to UP [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] uhub0 numa-domain 0 on usbus0 [...] [2] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [2] nvme0: Allocated 32MB host memory buffer [...] [2] nda0 at nvme0 bus 0 scbus16 target 0 lun 1 [...] nda0: <CT2000P3PSSD8 P9CR40A 2248E68D46CF> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] [2] nda0: 1907729MB (3907029168 512 byte sectors) [...] [2] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 870 EVO 500GB SVT01B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] [2] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <Samsung SSD 870 EVO 500GB SVT02B6Q> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] [2] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] [2] ses1 at ahciem1 bus 0 scbus15 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] [2] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] [2] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] [3] Trying to mount root from zfs:zroot/ROOT/default []... [...] [4] Root mount waiting for: usbus0 [...] [4] uhub0: 26 ports with 26 removable, self powered [...] [5] ugen0.2: <EATON Eaton 5PX> at usbus0 [...] [5] Root mount waiting for: usbus0 [...] [5] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: None [...] [5] ixl0: link state changed to UP [...] [6] ixl1: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: None [...] [6] ixl1: link state changed to UP [...] [6] Root mount waiting for: usbus0 [...] [6] ugen0.3: <vendor 0x0557 product 0x8021> at usbus0 [...] [6] uhub1 numa-domain 0 on uhub0 [...] [6] uhub1: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 2> on usbus0 [...] [7] uhub1: 4 ports with 4 removable, self powered [...] [7] Root mount waiting for: usbus0 [...] [7] ugen0.4: <Logitech Logitech USB Keyboard> at usbus0 [...] [7] ukbd0 numa-domain 0 on uhub1 [...] [7] ukbd0: <Logitech Logitech USB Keyboard, class 0/0, rev 1.10/15.00, addr 3> on usbus0 [...] [7] kbd2 at ukbd0 [...] [7] hid_get_item: HID_ITEM_MAXUSAGE should be increased up to 28 to parse the HID report descriptor [...] [8] ugen0.5: <vendor 0x0557 product 0x7000> at usbus0 [...] [8] uhub2 numa-domain 0 on uhub0 [...] [8] uhub2: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 4> on usbus0 [...] [8] Root mount waiting for: usbus0 [...] [8] uhub2: 4 ports with 3 removable, self powered [...] [8] ugen0.6: <vendor 0x0557 product 0x2419> at usbus0 [...] [8] ukbd1 numa-domain 0 on uhub2 [...] [8] ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 5> on usbus0 [...] [8] kbd3 at ukbd1 [...] [9] ugen0.7: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] [9] uhub3 numa-domain 0 on uhub0 [...] [9] uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 6> on usbus0 [...] [9] uhub3: MTT enabled [...] [9] Root mount waiting for: usbus0 [...] [10] uhub3: 4 ports with 4 removable, self powered [...] [10] ugen0.8: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] [10] uhub4 numa-domain 0 on uhub3 [...] [10] uhub4: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 7> on usbus0 [...] [10] uhub4: MTT enabled [...] [10] Root mount waiting for: usbus0 [...] [11] uhub4: 4 ports with 4 removable, self powered [...] [11] Dual Console: Video Primary, Serial Secondary [...] [11] pid 32 (zpool) is attempting to use unsafe AIO requests - not logging anymore