[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p3 stable/25.1-n269769-0381600e81a4 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Xeon(R) CPU E3-1245 v5 @ 3.50GHz (3500.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 51539607552 (49152 MB) [...] avail memory = 49827205120 (47518 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 802E > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 5 4 2 3 6 7 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xbf8c5000-0xbf8c501e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] t4nex0: <Chelsio T420-CR> mem 0xce880000-0xce8bffff,0xce000000-0xce7fffff,0xce9c4000-0xce9c5fff at device 0.4 on pci1 [...] cxgbe0: <port 0> on t4nex0 [...] cxgbe0: Ethernet address: ... [...] cxgbe0: 8 txq, 8 rxq (NIC); 8 txq (TOE), 2 rxq (TOE) [...] cxgbe1: <port 1> on t4nex0 [...] cxgbe1: Ethernet address: ... [...] cxgbe1: 8 txq, 8 rxq (NIC); 8 txq (TOE), 2 rxq (TOE) [...] t4nex0: PCIe gen2 x8, 2 ports, 22 MSI-X interrupts, 54 eq, 21 iq [...] pci1: <mass storage, SCSI> at device 0.5 (no driver attached) [...] pci1: <serial bus, Fibre Channel> at device 0.6 (no driver attached) [...] pci1: <network, ethernet> at device 0.7 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xcd000000-0xcdffffff,0x1ff0000000-0x1fffffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xceb20000-0xceb2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x3080-0x3087,0x3088-0x308b,0x3060-0x307f mem 0xceb34000-0xceb35fff,0xceb3a000-0xceb3a0ff,0xceb38000-0xceb387ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xcea00000-0xcea03fff at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] em0: <Intel(R) I219-LM SPT-H(2)> mem 0xceb00000-0xceb1ffff at device 31.6 on pci0 [...] em0: EEPROM V0.8-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (9600,n,8,1) [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC-low" frequency 1751996497 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] nda0 at nvme0 bus 0 scbus4 target 0 lun 1 [...] nda0: <SAMSUNG MZVPW256HEGL-000H1 CXZ74H0Q S34ENY0J508384> [...] nda0: Serial Number... [...] nda0: nvme version 1.2 [...] nda0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub0: 26 ports with 26 removable, self powered [...] pid 30 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] em0: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0xceb36000-0xceb36fff at device 20.2 on pci0 [...] ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xefa0-0xefbf mem 0xceb39000-0xceb390ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] pflog0: permanently promiscuous mode enabled [...] cxgbe0: tso4 disabled due to -txcsum. [...] cxgbe0: tso6 disabled due to -txcsum6. [...] cxgbe1: tso4 disabled due to -txcsum. [...] cxgbe1: tso6 disabled due to -txcsum6. [...] vlan0: changing name to 'vlan005' [...] vlan1: changing name to 'vlan019' [...] vlan2: changing name to 'vlan020' [...] vlan3: changing name to 'vlan021' [...] vlan4: changing name to 'vlan022' [...] vlan5: changing name to 'vlan023' [...] vlan6: changing name to 'vlan025' [...] cxgbe0: link state changed to UP [...] vlan019: link state changed to UP [...] vlan021: link state changed to UP [...] vlan020: link state changed to UP [...] vlan005: link state changed to UP [...] vlan023: link state changed to UP [...] vlan022: link state changed to UP [...] vlan025: link state changed to UP [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] cxgbe1: link state changed to UP [...] em0: link state changed to DOWN [...] cxgbe1: link state changed to DOWN [...] cxgbe1: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] em0: link state changed to UP [...] pid 59174 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] cxgbe1: promiscuous mode enabled [...] cxgbe0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan022 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan022 [...] pid 67022 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] cxgbe1: promiscuous mode disabled [...] cxgbe0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 34d2h57m37s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p3 stable/25.1-n269825-cbaf3aa6b26b SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Xeon(R) CPU E3-1245 v5 @ 3.50GHz (3500.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 51539607552 (49152 MB) [...] avail memory = 49823010816 (47514 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 802E > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 4 6 7 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xbf8c5000-0xbf8c501e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] t4nex0: <Chelsio T420-CR> mem 0xce880000-0xce8bffff,0xce000000-0xce7fffff,0xce9c4000-0xce9c5fff at device 0.4 on pci1 [...] cxgbe0: <port 0> on t4nex0 [...] cxgbe0: Ethernet address: ... [...] cxgbe0: 8 txq, 8 rxq (NIC); 8 txq (TOE), 2 rxq (TOE) [...] cxgbe1: <port 1> on t4nex0 [...] cxgbe1: Ethernet address: ... [...] cxgbe1: 8 txq, 8 rxq (NIC); 8 txq (TOE), 2 rxq (TOE) [...] t4nex0: PCIe gen2 x8, 2 ports, 22 MSI-X interrupts, 54 eq, 21 iq [...] pci1: <mass storage, SCSI> at device 0.5 (no driver attached) [...] pci1: <serial bus, Fibre Channel> at device 0.6 (no driver attached) [...] pci1: <network, ethernet> at device 0.7 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xcd000000-0xcdffffff,0x1ff0000000-0x1fffffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xceb20000-0xceb2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x3080-0x3087,0x3088-0x308b,0x3060-0x307f mem 0xceb34000-0xceb35fff,0xceb3a000-0xceb3a0ff,0xceb38000-0xceb387ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xcea00000-0xcea03fff at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] em0: <Intel(R) I219-LM SPT-H(2)> mem 0xceb00000-0xceb1ffff at device 31.6 on pci0 [...] em0: EEPROM V0.8-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (9600,n,8,1) [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC-low" frequency 1751996544 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nda0 at nvme0 bus 0 scbus4 target 0 lun 1 [...] nda0: <SAMSUNG MZVPW256HEGL-000H1 CXZ74H0Q S34ENY0J508384> [...] nda0: Serial Number... [...] nda0: nvme version 1.2 [...] nda0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 [...] pid 30 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] em0: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0xceb36000-0xceb36fff at device 20.2 on pci0 [...] ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xefa0-0xefbf mem 0xceb39000-0xceb390ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] pflog0: permanently promiscuous mode enabled [...] cxgbe0: tso4 disabled due to -txcsum. [...] cxgbe0: tso6 disabled due to -txcsum6. [...] cxgbe1: tso4 disabled due to -txcsum. [...] cxgbe1: tso6 disabled due to -txcsum6. [...] vlan0: changing name to 'vlan005' [...] vlan1: changing name to 'vlan019' [...] vlan2: changing name to 'vlan020' [...] vlan3: changing name to 'vlan021' [...] vlan4: changing name to 'vlan022' [...] vlan5: changing name to 'vlan023' [...] vlan6: changing name to 'vlan025' [...] cxgbe0: link state changed to UP [...] vlan019: link state changed to UP [...] vlan021: link state changed to UP [...] vlan020: link state changed to UP [...] vlan005: link state changed to UP [...] vlan023: link state changed to UP [...] vlan022: link state changed to UP [...] vlan025: link state changed to UP [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] cxgbe1: link state changed to UP [...] em0: link state changed to DOWN [...] cxgbe0: link state changed to DOWN [...] vlan019: link state changed to DOWN [...] vlan021: link state changed to DOWN [...] vlan020: link state changed to DOWN [...] vlan005: link state changed to DOWN [...] vlan023: link state changed to DOWN [...] vlan022: link state changed to DOWN [...] vlan025: link state changed to DOWN [...] cxgbe0: link state changed to UP [...] vlan019: link state changed to UP [...] vlan021: link state changed to UP [...] vlan020: link state changed to UP [...] vlan005: link state changed to UP [...] vlan023: link state changed to UP [...] vlan022: link state changed to UP [...] vlan025: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] cxgbe1: link state changed to DOWN [...] cxgbe1: link state changed to UP [...] em0: link state changed to UP [...] pid 85514 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] cxgbe1: promiscuous mode enabled [...] cxgbe0: promiscuous mode enabled [...] ng0: changing name to 'pppoe0' [...] ng0: changing name to 'pppoe0' [...] pid 95809 (squid), jid 0, uid 100: exited on signal 6 (no core dump - bad address) [...] cxgbe1: promiscuous mode disabled [...] cxgbe0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 35d17h25m23s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p4 stable/25.1-n269832-6addeda7db20 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Xeon(R) CPU E3-1245 v5 @ 3.50GHz (3500.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 51539607552 (49152 MB) [...] avail memory = 49823006720 (47514 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 802E > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 5 4 2 6 7 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xbf8c5000-0xbf8c501e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] t4nex0: <Chelsio T420-CR> mem 0xce880000-0xce8bffff,0xce000000-0xce7fffff,0xce9c4000-0xce9c5fff at device 0.4 on pci1 [...] cxgbe0: <port 0> on t4nex0 [...] cxgbe0: Ethernet address: ... [...] cxgbe0: 8 txq, 8 rxq (NIC); 8 txq (TOE), 2 rxq (TOE) [...] cxgbe1: <port 1> on t4nex0 [...] cxgbe1: Ethernet address: ... [...] cxgbe1: 8 txq, 8 rxq (NIC); 8 txq (TOE), 2 rxq (TOE) [...] t4nex0: PCIe gen2 x8, 2 ports, 22 MSI-X interrupts, 54 eq, 21 iq [...] pci1: <mass storage, SCSI> at device 0.5 (no driver attached) [...] pci1: <serial bus, Fibre Channel> at device 0.6 (no driver attached) [...] pci1: <network, ethernet> at device 0.7 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xcd000000-0xcdffffff,0x1ff0000000-0x1fffffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xceb20000-0xceb2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x3080-0x3087,0x3088-0x308b,0x3060-0x307f mem 0xceb34000-0xceb35fff,0xceb3a000-0xceb3a0ff,0xceb38000-0xceb387ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xcea00000-0xcea03fff at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] em0: <Intel(R) I219-LM SPT-H(2)> mem 0xceb00000-0xceb1ffff at device 31.6 on pci0 [...] em0: EEPROM V0.8-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (9600,n,8,1) [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC-low" frequency 1751996605 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ZFS storage pool version: features support (5000) [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nda0 at nvme0 bus 0 scbus4 target 0 lun 1 [...] nda0: <SAMSUNG MZVPW256HEGL-000H1 CXZ74H0Q S34ENY0J508384> [...] nda0: Serial Number... [...] nda0: nvme version 1.2 [...] nda0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 26 ports with 26 removable, self powered [...] pid 30 (zpool) is attempting to use unsafe AIO requests - not logging anymore