[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p7 stable/24.7-n268020-d553534fe81 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 1024x768 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz (2397.33-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16439402496 (15677 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HP ProLiant> [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 6 12 2 10 5 14 11 7 13 8 15 4 3 9 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x788db000-0x788db01e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HP ProLiant> [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 1.1 on pci1 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 2.0 on pci1 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 2.1 on pci1 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 2.2 on pci1 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 2.3 on pci1 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 3.0 on pci1 [...] pci8: <ACPI PCI bus> on pcib8 [...] ix0: <Intel(R) X540-AT2> mem 0x92c00000-0x92dfffff,0x93000000-0x93003fff at device 0.0 on pci8 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: fw 4.3.0 nvm 4.05.0 eTrack 0x80000528 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) X540-AT2> mem 0x92e00000-0x92ffffff,0x93004000-0x93007fff at device 0.1 on pci8 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: fw 4.3.0 nvm 4.05.0 eTrack 0x80000528 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib9: <ACPI PCI-PCI bridge> at device 3.1 on pci1 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> at device 3.2 on pci1 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 3.3 on pci1 [...] pci11: <ACPI PCI bus> on pcib11 [...] pci1: <dasp, performance counters> at device 5.6 (no driver attached) [...] pci1: <unknown> at device 17.0 (no driver attached) [...] xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x39ffff00000-0x39ffff0ffff at device 20.0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x93401000-0x934013ff at device 26.0 on pci1 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci1 [...] pci12: <ACPI PCI bus> on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> at device 28.2 on pci1 [...] pci13: <ACPI PCI bus> on pcib13 [...] vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff at device 0.1 on pci13 [...] vgapci0: Boot video device [...] uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f at device 0.4 on pci13 [...] usbus2 on uhci0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] pcib14: <ACPI PCI-PCI bridge> at device 28.4 on pci1 [...] pci14: <ACPI PCI bus> on pcib14 [...] igb0: <Intel(R) I350 (Copper)> port 0x2020-0x203f mem 0x93200000-0x932fffff,0x93304000-0x93307fff at device 0.0 on pci14 [...] igb0: EEPROM V1.63-0 Option ROM V1-b3299-p0 eTrack 0x8000119a [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) I350 (Copper)> port 0x2000-0x201f mem 0x93100000-0x931fffff,0x93300000-0x93303fff at device 0.1 on pci14 [...] igb1: EEPROM V1.63-0 Option ROM V1-b3299-p0 eTrack 0x8000119a [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib15: <ACPI PCI-PCI bridge> at device 28.6 on pci1 [...] pci15: <ACPI PCI bus> on pcib15 [...] pcib16: <ACPI PCI-PCI bridge> at device 28.7 on pci1 [...] pci16: <ACPI PCI bus> on pcib16 [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x93400000-0x934003ff at device 29.0 on pci1 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci1 [...] isa0: <ISA bus> on isab0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bbe00001a00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bbe00001a00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bbe00001a00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bbe00001a00 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b9500001a00 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b9500001a00 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bbe00001a00 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bbe00001a00 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bbe00001a00 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bbe00001a00 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bbe00001a00 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b9500001a00 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bbe00001a00 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bbe00001a00 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b9500001a00 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b9500001a00 [...] device_attach: est15 attach returned 6 [...] Timecounter "TSC-low" frequency 1198611775 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <HP UHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus3 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus1 [...] uhub3 on usbus2 [...] uhub3: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen2.2: <BMC Virtual Keyboard> at usbus2 [...] ukbd0 on uhub3 [...] ukbd0: <BMC Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on usbus2 [...] uhub0: 2 ports with 2 removable, self powered [...] kbd2 at ukbd0 [...] uhub1: 21 ports with 21 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen0.2: <vendor 0x0424 product 0x2660> at usbus0 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0 [...] ugen3.2: <vendor 0x8087 product 0x8002> at usbus3 [...] uhub6 on uhub0 [...] uhub6: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3 [...] uhub4: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus0 usbus3 [...] uhub5: 2 ports with 1 removable, self powered [...] uhub6: 8 ports with 8 removable, self powered [...] ugen0.3: <Samsung Flash Drive FIT> at usbus0 [...] umass0 on uhub1 [...] umass0: <Samsung Flash Drive FIT, class 0/0, rev 2.10/11.00, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:0:0: Attached to scbus0 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] mountroot: waiting for device /dev/gpt/rootfs... [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <Samsung Flash Drive FIT 1100> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 244752MB (501253132 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE>