[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE GENERIC amd64 [...] FreeBSD clang version 12.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-12.0.1-0-gfed41342a82f) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (3198.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16461914112 (15699 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 1 3 [...] Timecounter "TSC-low" frequency 1599108061 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 16351232 bytes at 0xffffffff830f0010 [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xdf800000-0xdfbfffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xdfd34000-0xdfd37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Wildcat Point USB 3.0 controller> mem 0xdfd20000-0xdfd2ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) I218-V (2)> port 0xf080-0xf09f mem 0xdfd00000-0xdfd1ffff,0xdfd3c000-0xdfd3cfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.1-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Wildcat Point USB 2.0 controller USB-B> mem 0xdfd3b000-0xdfd3b3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Wildcat Point HDA Controller> mem 0xdfd30000-0xdfd33fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ath0: <Atheros AR938x> mem 0xdfc00000-0xdfc1ffff irq 18 at device 0.0 on pci5 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] LDPC transmit/receive enabled [...] ath0: [HT] 3 RX streams; 3 TX streams [...] ath0: AR9380 mac 448.3 RF5110 phy 0.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] ehci1: <Intel Wildcat Point USB 2.0 controller USB-A> mem 0xdfd3a000-0xdfd3a3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xdfd39000-0xdfd397ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm0: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 [...] pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm2: <Realtek ALC892 (Internal Digital)> at nid 17 on hdaa1 [...] pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: CAM [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 238475MB (488397168 512 byte sectors) [...] ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 21 ports with 21 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x8009> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8001> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ugen0.2: <SanDisk Ultra Fit> at usbus0 [...] umass0 on uhub0 [...] umass0: <SanDisk Ultra Fit, class 0/0, rev 2.10/1.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <SanDisk Ultra Fit 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 29328MB (60063744 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT table is corrupt or invalid. [...] GEOM: da0: using the primary only -- recovery suggested. [...] GEOM: iso9660/GHOSTBSD: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/GHOSTBSD: using the primary only -- recovery suggested. [...] ugen0.3: <CM Storm QuickFire Rapid keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <CM Storm QuickFire Rapid keyboard, class 0/0, rev 1.10/0.01, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <Mad Catz Mad Catz R.A.T.5 Mouse> at usbus0 [...] random: unblocking device. [...] Trying to mount root from zfs:livecd []... [...] Cuse v0.1.36 @ /dev/cuse [...] ichsmb0: <Intel Wildcat Point SMBus controller> port 0xf040-0xf05f mem 0xdfd38000-0xdfd380ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] lo0: link state changed to UP [...] wlan0: Ethernet address: ... [...] ums0 on uhub0 [...] ums0: <CM Storm QuickFire Rapid keyboard, class 0/0, rev 1.10/0.01, addr 2> on usbus0 [...] ums1 on uhub0 [...] ums1: <Mad Catz Mad Catz R.A.T.5 Mouse, class 0/0, rev 2.00/2.22, addr 3> on usbus0 [...] ums1: 13 buttons and [XYZ] coordinates ID=0 [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] VT: Replacing driver "efifb" with new "dummy". [...] Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xbb200000, size 0x4000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-3 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "dummy" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xc0311000 vbase=0xfffff800c0311000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] pid 1483 (gnome-keyring-daemo), jid 0, uid 1001: exited on signal 11 (core dumped) [...] ugen0.2: <SanDisk Ultra Fit> at usbus0 (disconnected) [...] umass0: at uhub0, port 5, addr 1 (disconnected) [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <SanDisk Ultra Fit 1.00> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] All buffers synced. [...] Uptime: 25m34s [...] uhub4: detached [...] uhub2: detached [...] uhub3: detached [...] uhub1: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE GENERIC amd64 [...] FreeBSD clang version 12.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-12.0.1-0-gfed41342a82f) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (3198.21-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16478646272 (15715 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 2 1 [...] Timecounter "TSC-low" frequency 1599104323 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xdf800000-0xdfbfffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xdfd34000-0xdfd37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Wildcat Point USB 3.0 controller> mem 0xdfd20000-0xdfd2ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) I218-V (2)> port 0xf080-0xf09f mem 0xdfd00000-0xdfd1ffff,0xdfd3c000-0xdfd3cfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.1-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Wildcat Point USB 2.0 controller USB-B> mem 0xdfd3b000-0xdfd3b3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Wildcat Point HDA Controller> mem 0xdfd30000-0xdfd33fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ath0: <Atheros AR938x> mem 0xdfc00000-0xdfc1ffff irq 18 at device 0.0 on pci5 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] LDPC transmit/receive enabled [...] ath0: [HT] 3 RX streams; 3 TX streams [...] ath0: AR9380 mac 448.3 RF5110 phy 0.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] ehci1: <Intel Wildcat Point USB 2.0 controller USB-A> mem 0xdfd3a000-0xdfd3a3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xdfd39000-0xdfd397ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm0: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 [...] pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm2: <Realtek ALC892 (Internal Digital)> at nid 17 on hdaa1 [...] pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: CAM [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 238475MB (488397168 512 byte sectors) [...] ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Cuse v0.1.36 @ /dev/cuse [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 21 ports with 21 removable, self powered [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] VT: Replacing driver "efifb" with new "dummy". [...] Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xbb200000, size 0x4000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-3 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "dummy" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xc0311000 vbase=0xfffff800c0311000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] ichsmb0: <Intel Wildcat Point SMBus controller> port 0xf040-0xf05f mem 0xdfd38000-0xdfd380ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ugen0.2: <CM Storm QuickFire Rapid keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <CM Storm QuickFire Rapid keyboard, class 0/0, rev 1.10/0.01, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.2: <vendor 0x8087 product 0x8009> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8001> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ugen0.3: <Mad Catz Mad Catz R.A.T.5 Mouse> at usbus0 [...] ums0 on uhub0 [...] ums0: <CM Storm QuickFire Rapid keyboard, class 0/0, rev 1.10/0.01, addr 1> on usbus0 [...] ums1 on uhub0 [...] ums1: <Mad Catz Mad Catz R.A.T.5 Mouse, class 0/0, rev 2.00/2.22, addr 2> on usbus0 [...] ums1: 13 buttons and [XYZ] coordinates ID=0 [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] wlan0: link state changed to UP [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] ath0: ath_intr: TSFOOR [...] module_register: cannot register pci/em from if_em.ko; already loaded from kernel [...] Module pci/em failed to register: 17 [...] module_register: cannot register pci/igb from if_em.ko; already loaded from kernel [...] Module pci/igb failed to register: 17 [...] module_register: cannot register pci/em from if_em.ko; already loaded from kernel [...] Module pci/em failed to register: 17 [...] module_register: cannot register pci/igb from if_em.ko; already loaded from kernel [...] Module pci/igb failed to register: 17 [...] module_register: cannot register pci/em from if_em.ko; already loaded from kernel [...] Module pci/em failed to register: 17 [...] module_register: cannot register pci/igb from if_em.ko; already loaded from kernel [...] Module pci/igb failed to register: 17 [...] module_register: cannot register pci/em from if_em.ko; already loaded from kernel [...] Module pci/em failed to register: 17 [...] module_register: cannot register pci/igb from if_em.ko; already loaded from kernel [...] Module pci/igb failed to register: 17 [...] pid 1569 (python3.8), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 1563 (sudo), jid 0, uid 0: exited on signal 6 [...] pid 1560 (caja), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 1562 (wnck-applet), jid 0, uid 1002: exited on signal 6 [...] pid 1557 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5198 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5205 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5200 (wnck-applet), jid 0, uid 1002: exited on signal 6 [...] pid 5206 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5207 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5210 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5211 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5212 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5209 (wnck-applet), jid 0, uid 1002: exited on signal 6 [...] pid 5213 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5214 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5217 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5218 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5219 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5220 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5221 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5222 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5216 (wnck-applet), jid 0, uid 1002: exited on signal 6 [...] pid 5223 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5224 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5227 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5228 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5229 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5230 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5231 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5232 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5233 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5234 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5235 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5250 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5251 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5253 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5254 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5256 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5273 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5283 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5284 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5285 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5286 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5287 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5288 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5289 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5290 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5291 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5292 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5293 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5226 (wnck-applet), jid 0, uid 1002: exited on signal 6 [...] pid 5294 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5295 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5298 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] pid 5299 (mate-panel), jid 0, uid 1002: exited on signal 6 (core dumped) [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (3198.25-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16478306304 (15714 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xdf800000-0xdfbfffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xdfd34000-0xdfd37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Wildcat Point USB 3.0 controller> mem 0xdfd20000-0xdfd2ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) I218-V (2)> port 0xf080-0xf09f mem 0xdfd00000-0xdfd1ffff,0xdfd3c000-0xdfd3cfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.1-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Wildcat Point USB 2.0 controller USB-B> mem 0xdfd3b000-0xdfd3b3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Wildcat Point HDA Controller> mem 0xdfd30000-0xdfd33fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ath0: <Atheros AR938x> mem 0xdfc00000-0xdfc1ffff irq 18 at device 0.0 on pci5 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] LDPC transmit/receive enabled [...] ath0: [HT] 3 RX streams; 3 TX streams [...] ath0: AR9380 mac 448.3 RF5110 phy 0.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] ehci1: <Intel Wildcat Point USB 2.0 controller USB-A> mem 0xdfd3a000-0xdfd3a3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xdfd39000-0xdfd397ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1599074113 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm0: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 [...] pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm2: <Realtek ALC892 (Internal Digital)> at nid 17 on hdaa1 [...] pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 238475MB (488397168 512 byte sectors) [...] ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Cuse v0.1.36 @ /dev/cuse [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] VT: Replacing driver "efifb" with new "dummy". [...] Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xbb200000, size 0x4000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-3 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "dummy" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xc0311000 vbase=0xfffff800c0311000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] ichsmb0: <Intel Wildcat Point SMBus controller> port 0xf040-0xf05f mem 0xdfd38000-0xdfd380ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 21 ports with 21 removable, self powered [...] ugen0.2: <CM Storm QuickFire Rapid keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <CM Storm QuickFire Rapid keyboard, class 0/0, rev 1.10/0.01, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen2.2: <vendor 0x8087 product 0x8001> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8009> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <Mad Catz Mad Catz R.A.T.5 Mouse> at usbus0 [...] ums0 on uhub1 [...] ums0: <CM Storm QuickFire Rapid keyboard, class 0/0, rev 1.10/0.01, addr 1> on usbus0 [...] ums1 on uhub1 [...] ums1: <Mad Catz Mad Catz R.A.T.5 Mouse, class 0/0, rev 2.00/2.22, addr 2> on usbus0 [...] ums1: 13 buttons and [XYZ] coordinates ID=0 [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] wlan0: link state changed to UP