[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.3-STABLE #0 airyx/12-n1-3d92105e0-dirty: Thu Nov 18 00:02:13 UTC 2021 [...] XXX@XXX:/obj.amd64/tmp/cirrus-ci-build/sys/GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i7-10710U CPU @ 1.10GHz (1600.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0660 Family=0x6 Model=0xa6 Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33022619648 (31492 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL NUC9i5FN> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] arc4random: no preloaded entropy cache [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 9 5 3 7 11 2 4 6 10 8 [...] Timecounter "TSC" frequency 1600000000 Hz quality 1000 [...] WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0. [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 14352384 bytes at 0xffffffff82497be8 [...] 000.000048 [4344] netmap_init netmap: loaded module [...] WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0. [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff811848f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <INTEL> on motherboard [...] acpi0: Power Button (fixed) [...] unknown: memory range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6022000000-0x6022ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6023100000-0x602310ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <network> at device 20.3 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x96320000-0x96321fff,0x96323000-0x963230ff,0x96322000-0x963227ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pcib1: [GIANT-LOCKED] [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 1.0 on pci2 [...] pcib4: [GIANT-LOCKED] [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci2 [...] pci4: <ACPI PCI bus> on pcib5 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x95f00000-0x95f0ffff at device 0.0 on pci4 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib6 [...] nvme0: <Generic NVMe Device> mem 0x96200000-0x96203fff,0x96204000-0x962040ff at device 0.0 on pci5 [...] pcib7: <ACPI PCI-PCI bridge> at device 29.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib7 [...] sdhci_pci0: <Generic SD HCI> mem 0x96100000-0x96100fff at device 0.0 on pci6 [...] sdhci_pci0: 1 slot(s) allocated [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Comet Lake-LP HDA Controller> mem 0x6023110000-0x6023113fff,0x6023000000-0x60230fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V CMP(10)> mem 0x96300000-0x9631ffff at device 31.6 on pci0 [...] em0: EEPROM V0.6-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz1: _HOT value is absurd, ignored (-73.1C) [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior. [...] Consider tuning vm.kmem_size and vm.kmem_size_max [...] in /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] WARNING: Device "crypto" is Giant locked and may be deleted before FreeBSD 14.0. [...] arc4random: no preloaded entropy cache [...] acpi_tz1: _TMP value is absurd, ignored (-263.1C) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <0x8086 XHCI root HUB> at usbus1 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <WDS100T3X0C-00SJG0> NVMe namespace [...] nvd0: 953869MB (1953525168 512 byte sectors) [...] hdacc0: <Realtek ALC256 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC256 (Analog)> at nid 33 and 18 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ada0 at ahcich2 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 860 EVO 1TB RVT04B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] random: unblocking device. [...] arc4random: no preloaded entropy cache [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: usbus0 usbus1 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 18 ports with 18 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/2.21, addr 1> on usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.10, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] ums0 on uhub2 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.10, addr 2> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] Root mount waiting for: usbus0 [...] ugen0.4: <vendor 0x0518 USB-compliant keyboard> at usbus0 [...] ukbd1 on uhub2 [...] ukbd1: <vendor 0x0518 USB-compliant keyboard, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] kbd2 at ukbd1 [...] ums1 on uhub2 [...] ums1: <vendor 0x0518 USB-compliant keyboard, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] ugen0.5: <Microsoft Microsoft Nano Transceiver 1.1> at usbus0 [...] ukbd2 on uhub2 [...] ukbd2: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 4> on usbus0 [...] kbd3 at ukbd2 [...] ums2 on uhub2 [...] ums2: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 4> on usbus0 [...] ums2: 5 buttons and [XYZ] coordinates ID=0 [...] Root mount waiting for: usbus0 [...] ugen0.6: <C-Media Electronics Inc. USB Audio Device> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.7: <vendor 0x8087 product 0x0026> at usbus0 [...] ugen0.8: <VIA Labs, Inc. USB3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/2.21, addr 7> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.9: <Samsung Portable SSD T3> at usbus0 [...] umass0 on uhub0 [...] umass0: <Samsung Portable SSD T3, class 0/0, rev 3.00/1.00, addr 8> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:1:0: Attached to scbus1 [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <Samsung Portable SSD T3 0> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 238475MB (488397168 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] GEOM: ventoy/IMAGE: the secondary GPT table is corrupt or invalid. [...] GEOM: ventoy/IMAGE: using the primary only -- recovery suggested. [...] GEOM: iso9660/AIRYX: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/AIRYX: using the primary only -- recovery suggested. [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 3 3 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 6m2s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 2560x1440 [...] CPU: Intel(R) Core(TM) i7-10710U CPU @ 1.10GHz (1600.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0660 Family=0x6 Model=0xa6 Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33030217728 (31500 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL NUC9i5FN> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 9 11 7 5 6 2 4 3 8 10 [...] Timecounter "TSC" frequency 1600000000 Hz quality 1000 [...] KTLS: Initialized 12 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000066 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <INTEL> [...] acpi0: Power Button (fixed) [...] unknown: memory range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6022000000-0x6022ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6023100000-0x602310ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <network> at device 20.3 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x96320000-0x96321fff,0x96323000-0x963230ff,0x96322000-0x963227ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 1.0 on pci2 [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci2 [...] pci4: <ACPI PCI bus> on pcib5 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x95f00000-0x95f0ffff at device 0.0 on pci4 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib6 [...] nvme0: <Generic NVMe Device> mem 0x96200000-0x96203fff,0x96204000-0x962040ff at device 0.0 on pci5 [...] pcib7: <ACPI PCI-PCI bridge> at device 29.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib7 [...] sdhci_pci0: <Generic SD HCI> mem 0x96100000-0x96100fff at device 0.0 on pci6 [...] sdhci_pci0: 1 slot(s) allocated [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Comet Lake-LP HDA Controller> mem 0x6023110000-0x6023113fff,0x6023000000-0x60230fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> mem 0x96300000-0x9631ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz1: _HOT value is absurd, ignored (-73.1C) [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] Timecounters tick every 1.000 msec [...] acpi_tz1: _TMP value is absurd, ignored (-263.1C) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <0x8086 XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <WDS100T3X0C-00SJG0> NVMe namespace [...] nvd0: 953869MB (1953525168 512 byte sectors) [...] hdacc0: <Realtek ALC256 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc0 [...] GEOM_LABEL[1]: MSDOSFS: nvd0: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider nvd0 is diskid/XXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label for provider nvd0p1 is gptid/HASH_643-E5AF-DD32-B03F-1750A6C7D3E4. [...] GEOM_LABEL[1]: MSDOSFS: nvd0p1: FAT32 volume detected. [...] GEOM_LABEL[1]: Label for provider nvd0p1 is msdosfs/NO_LABEL. [...] GEOM_LABEL[1]: Label for provider nvd0p2 is gpt/root. [...] GEOM_LABEL[1]: Label for provider nvd0p2 is gptid/HASH_298-E516-5B7C-7E02-B08A10B5399B. [...] GEOM_LABEL[1]: MSDOSFS: nvd0p2: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on nvd0p2. [...] GEOM_LABEL[1]: Label HASH_643-E5AF-DD32-B03F-1750A6C7D3E4(gptid/HASH_643-E5AF-DD32-B03F-1750A6C7D3E4) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume detected. [...] GEOM_LABEL[1]: Label NO_LABEL(msdosfs/NO_LABEL) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label root(gpt/root) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_298-E516-5B7C-7E02-B08A10B5399B(gptid/HASH_298-E516-5B7C-7E02-B08A10B5399B) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] pcm0: <Realtek ALC256 (Analog)> at nid 33 and 18 on hdaa0 [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXXXXXX [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ada0 at ahcich2 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 860 EVO 1TB RVT04B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] GEOM_LABEL[1]: MSDOSFS: ada0: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label for provider ada0p1 is gpt/EFI%20System%20Partition. [...] GEOM_LABEL[1]: Label for provider ada0p1 is gptid/HASH_E6C-DF80-EAC7-7345-B400686C0BB2. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT32 volume has no name. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gptid/HASH_D0E-114B-24A8-DD7F-0214BCD78661. [...] GEOM_LABEL[1]: MSDOSFS: ada0p2: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada0p2. [...] GEOM_LABEL[1]: Label EFI%20System%20Partition(gpt/EFI%20System%20Partition) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_E6C-DF80-EAC7-7345-B400686C0BB2(gptid/HASH_E6C-DF80-EAC7-7345-B400686C0BB2) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume has no name. [...] GEOM_LABEL[1]: Label HASH_D0E-114B-24A8-DD7F-0214BCD78661(gptid/HASH_D0E-114B-24A8-DD7F-0214BCD78661) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXXXXXXXXX [...] Trying to mount root from cd9660:/dev/iso9660/LIVE []... [...] Root mount waiting for: usbus0 usbus1 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 18 ports with 18 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/2.21, addr 1> on usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.10, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <vendor 0x0518 USB-compliant keyboard> at usbus0 [...] ukbd1 on uhub2 [...] ukbd1: <vendor 0x0518 USB-compliant keyboard, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] kbd2 at ukbd1 [...] ugen0.5: <Microsoft Microsoft Nano Transceiver 1.1> at usbus0 [...] ukbd2 on uhub2 [...] ukbd2: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 4> on usbus0 [...] kbd3 at ukbd2 [...] Root mount waiting for: usbus0 [...] ugen0.6: <C-Media Electronics Inc. USB Audio Device> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.7: <vendor 0x8087 product 0x0026> at usbus0 [...] ugen0.8: <VIA Labs, Inc. USB3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/2.21, addr 7> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.9: <Samsung Portable SSD T3> at usbus0 [...] umass0 on uhub0 [...] umass0: <Samsung Portable SSD T3, class 0/0, rev 3.00/1.00, addr 8> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:1:0: Attached to scbus1 [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <Samsung Portable SSD T3 0> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 238475MB (488397168 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] random: unblocking device. [...] GEOM_LABEL[1]: MSDOSFS: da0: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider da0 is diskid/XXXXXXXXXXXXXXXXXX [...] GEOM: ventoy/IMAGE: the secondary GPT table is corrupt or invalid. [...] GEOM: ventoy/IMAGE: using the primary only -- recovery suggested. [...] GEOM_LABEL[1]: ISO9660 file system detected on ventoy/IMAGE. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGE is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGE: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider da0p1 is gpt/Ventoy. [...] GEOM_LABEL[1]: Label for provider da0p1 is gptid/HASH_C0D-6BF4-FC12-D9BD-C169784029AB. [...] GEOM_LABEL[1]: MSDOSFS: da0p1: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider da0p2 is gpt/VTOYEFI. [...] GEOM_LABEL[1]: Label for provider da0p2 is gptid/HASH_955-2E62-1DC0-0BF0-BEE8179C37EA. [...] GEOM_LABEL[1]: MSDOSFS: da0p2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0p2 is msdosfs/VTOYEFI. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp1 is gptid/HASH_62D-93EC-61B6-D2E3-3B5B2741B9B3. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp2 is gptid/HASH_274-470D-E215-5441-0D80B5D740F4. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp2 is msdosfs/EFISYS. [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] GEOM_LABEL[1]: Label Ventoy(gpt/Ventoy) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_C0D-6BF4-FC12-D9BD-C169784029AB(gptid/HASH_C0D-6BF4-FC12-D9BD-C169784029AB) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX no FAT volume detected. [...] GEOM_LABEL[1]: Label VTOYEFI(gpt/VTOYEFI) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_955-2E62-1DC0-0BF0-BEE8179C37EA(gptid/HASH_955-2E62-1DC0-0BF0-BEE8179C37EA) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label VTOYEFI(msdosfs/VTOYEFI) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_62D-93EC-61B6-D2E3-3B5B2741B9B3(gptid/HASH_62D-93EC-61B6-D2E3-3B5B2741B9B3) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_274-470D-E215-5441-0D80B5D740F4(gptid/HASH_274-470D-E215-5441-0D80B5D740F4) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] mountroot: waiting for device /dev/iso9660/LIVE... [...] GEOM_LABEL[1]: MSDOSFS: md0: no FAT signature found. [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: Label for provider md0.uzip is ufsid/XXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: MSDOSFS: md0.uzip: no FAT signature found. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] VT: Replacing driver "efifb" with new "dummy". [...] Failed to add WC MTRR for [0x4000000000-0x400fffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0x0, size 0x0 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] drmn0: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' [...] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] drmn0: Failed to program MOCS registers; expect performance issues. [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "dummy" with new "fb". [...] start FB_INFO: [...] type=11 height=1440 width=2560 depth=32 [...] cmsize=16 size=14745600 [...] pbase=0x4000040000 vbase=0xfffffe013f640000 [...] name=drmn0 flags=0x0 stride=10240 bpp=32 [...] cmap[0]=bcbcbc cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=ffffff [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_video0: <ACPI video extension> on vgapci0 [...] ig4iic0: <Intel Comet Lake-LP I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Comet Lake-LP I2C Controller-2> at device 21.2 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x20 [...] Cuse v0.1.36 @ /dev/cuse [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] ums0 on uhub2 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.10, addr 2> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label gptid/HASH_E6C-DF80-EAC7-7345-B400686C0BB2 removed. [...] GEOM_LABEL[1]: Label gpt/EFI%20System%20Partition removed. [...] GEOM_LABEL[1]: MSDOSFS: ada0: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label for provider ada0p1 is gpt/EFI%20System%20Partition. [...] GEOM_LABEL[1]: Label for provider ada0p1 is gptid/HASH_E6C-DF80-EAC7-7345-B400686C0BB2. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT32 volume detected. [...] uhid0 on uhub2 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.10, addr 2> on usbus0 [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT32 volume has no name. [...] GEOM_LABEL[1]: Label gptid/HASH_D0E-114B-24A8-DD7F-0214BCD78661 removed. [...] ums1 on uhub2 [...] ums1: <vendor 0x0518 USB-compliant keyboard, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] uhid1 on uhub2 [...] uhid1: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 4> on usbus0 [...] ums2 on uhub2 [...] ums2: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 4> on usbus0 [...] ums2: 5 buttons and [XYZ] coordinates ID=0 [...] GEOM_LABEL[1]: Label gptid/HASH_E6C-DF80-EAC7-7345-B400686C0BB2 removed. [...] GEOM_LABEL[1]: Label gpt/EFI%20System%20Partition removed. [...] uhid2 on uhub2 [...] uhid2: <C-Media Electronics Inc. USB Audio Device, class 0/0, rev 1.10/1.00, addr 5> on usbus0 [...] uaudio0 on uhub2 [...] uaudio0: <C-Media Electronics Inc. USB Audio Device, class 0/0, rev 1.10/1.00, addr 5> on usbus0 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm2: <USB audio> on uaudio0 [...] uaudio0: HID volume keys found. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gptid/HASH_D0E-114B-24A8-DD7F-0214BCD78661. [...] GEOM_LABEL[1]: MSDOSFS: ada0p2: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada0p2. [...] GEOM_LABEL[1]: Label gptid/HASH_D0E-114B-24A8-DD7F-0214BCD78661 removed. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gptid/HASH_D0E-114B-24A8-DD7F-0214BCD78661. [...] GEOM_LABEL[1]: MSDOSFS: ada0p2: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada0p2. [...] GEOM_LABEL[1]: Label gptid/HASH_D0E-114B-24A8-DD7F-0214BCD78661 removed. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gptid/HASH_D0E-114B-24A8-DD7F-0214BCD78661. [...] GEOM_LABEL[1]: MSDOSFS: ada0p2: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada0p2. [...] ng_ubt: HCI command 0xfc05 timed out [...] ubt0 on uhub0 [...] ubt0: <vendor 0x8087 product 0x0026, class 224/1, rev 2.01/0.02, addr 6> on usbus0 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] pid 3775 (python3.8), jid 0, uid 1000: exited on signal 11