[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p1 stable/23.7-n254737-f223233eef4 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2623 v3 @ 3.00GHz (2996.67-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33232637952 (31693 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 1 9 12 3 10 2 4 8 7 5 14 15 6 11 13 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfe300-0xfe31e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pcib1: <ACPI Host-PCI bridge> on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Invader> port 0x3000-0x30ff mem 0x92000000-0x9200ffff,0x91f00000-0x91ffffff irq 26 at device 0.0 numa-domain 0 on pci3 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 928, limiting to 128 [...] mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 [...] mfi0: 5303 (755145592s/0x0020/info) - Shutdown command received from host [...] mfi0: 5304 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f49/1028) [...] mfi0: 5305 (boot + 10s/0x0020/info) - Firmware version 4.300.00-8368 [...] mfi0: 5306 (boot + 11s/0x0008/info) - Battery Present [...] mfi0: 5307 (boot + 11s/0x0020/CRIT) - Disabling writes to flash as the part has gone bad [...] mfi0: 5308 (boot + 11s/0x0020/info) - Package version XXX.XXX.XXX.XXX [...] mfi0: 5309 (boot + 11s/0x0020/info) - Board Revision A04 [...] mfi0: 5310 (boot + 15s/0x0008/info) - Battery temperature is normal [...] mfi0: 5311 (boot + 15s/0x0008/info) - Battery started charging [...] mfi0: 5312 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 5313 (boot + 27s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored [...] mfi0: 5314 (boot + 27s/0x0002/info) - Inserted: Encl PD 20 [...] pcib4: <ACPI PCI-PCI bridge>mfi0: 5315 (boot + 27s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=528660a0734a4900,0000000000000000 [...] mfi0: 5316 (boot + 27s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] mfi0: 5317 (boot + 27s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000cca04fb72b irq 47 at device 3.0 numa-domain 0 on pci2 [...] pci4: <ACPI PCI bus>b9,0000000000000000 [...] mfi0: 5318 (boot + 27s/0x0002/info) - Inserted: PD 01(e0x20/s1) [...] mfi0: 5319 (boot + 27s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000cca04fb73199,0000000000000000 [...] mfi0: 5320 (boot + 27s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] numa-domain 0 on pcib4 [...] mfi0: 5321 (755145659s/0x0020/info) - Time established as 12/06/23 2:40:59; (33 seconds since power on) [...] mfi0: 5322 (755145858s/0x0020/info) - Host driver is loaded and operational [...] mfi0: 5323 (755147266s/0x0008/info) - Battery charge complete [...] mfi0: 5324 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f49/1028) [...] mfi0: 5325 (boot + 10s/0x0020/info) - Firmware version 4.300.00-8368 [...] mfi0: 5326 (boot + 11s/0x0008/info) - Battery Present [...] mfi0: 5327 (boot + 11s/0x0020/CRIT) - Disabling writes to flash as the part has gone bad [...] ix0: <Intel(R) X520 82599 (Dual SFP+)> port 0x2020-0x203f mem 0x91d00000-0x91dfffff,0x91e04000-0x91e07fff irq 40 at device 0.0 numa-domain 0 on pci4 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: Option ROM V19-b5-p12 eTrack 0x8000095d PHY FW V65535 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X520 82599 (Dual SFP+)> port 0x2000-0x201f mem 0x91c00000-0x91cfffff,0x91e00000-0x91e03fff irq 44 at device 0.1 numa-domain 0 on pci4 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: Option ROM V19-b5-p12 eTrack 0x8000095d PHY FW V65535 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib5: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci2 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pci2: <unknown> at device 17.0 (no driver attached) [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0x4078-0x407f,0x408c-0x408f,0x4070-0x4077,0x4088-0x408b,0x4040-0x405f mem 0x92101000-0x921017ff irq 16 at device 17.4 numa-domain 0 on pci2 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pci2: <simple comms> at device 22.0 (no driver attached) [...] pci2: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x92103000-0x921033ff irq 18 at device 26.0 numa-domain 0 on pci2 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.1 numa-domain 0 on pci2 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pcib8: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci6 [...] pci7: <PCI bus> numa-domain 0 on pcib8 [...] pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci7 [...] pci8: <PCI bus> numa-domain 0 on pcib9 [...] pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 [...] pci9: <PCI bus> numa-domain 0 on pcib10 [...] vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 17 at device 0.0 numa-domain 0 on pci9 [...] vgapci0: Boot video device [...] pcib11: <ACPI PCI-PCI bridge> irq 18 at device 28.2 numa-domain 0 on pci2 [...] pci10: <ACPI PCI bus> numa-domain 0 on pcib11 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a30000-0x91a3ffff,0x91a40000-0x91a4ffff,0x91a50000-0x91a5ffff irq 18 at device 0.0 numa-domain 0 on pci10 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> numa-domain 0 on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a00000-0x91a0ffff,0x91a10000-0x91a1ffff,0x91a20000-0x91a2ffff irq 19 at device 0.1 numa-domain 0 on pci10 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> numa-domain 0 on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pcib12: <ACPI PCI-PCI bridge> irq 19 at device 28.3 numa-domain 0 on pci2 [...] pci11: <ACPI PCI bus> numa-domain 0 on pcib12 [...] bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91b30000-0x91b3ffff,0x91b40000-0x91b4ffff,0x91b50000-0x91b5ffff irq 19 at device 0.0 numa-domain 0 on pci11 [...] bge2: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge2: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus2: <MII bus> numa-domain 0 on bge2 [...] brgphy2: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus2 [...] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge2: Using defaults for TSO: 65518/35/2048 [...] bge2: Ethernet address: ... [...] bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91b00000-0x91b0ffff,0x91b10000-0x91b1ffff,0x91b20000-0x91b2ffff irq 16 at device 0.1 numa-domain 0 on pci11 [...] bge3: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge3: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus3: <MII bus> numa-domain 0 on bge3 [...] brgphy3: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus3 [...] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge3: Using defaults for TSO: 65518/35/2048 [...] bge3: Ethernet address: ... [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x92102000-0x921023ff irq 18 at device 29.0 numa-domain 0 on pci2 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci1: <Intel Wellsburg AHCI SATA controller> port 0x4068-0x406f,0x4084-0x4087,0x4060-0x4067,0x4080-0x4083,0x4020-0x403f mem 0x92100000-0x921007ff irq 16 at device 31.2 numa-domain 0 on pci2 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahcich7: <AHCI channel> at channel 3 on ahci1 [...] ahcich8: <AHCI channel> at channel 4 on ahci1 [...] ahcich9: <AHCI channel> at channel 5 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] pcib13: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci12: <ACPI PCI bus> numa-domain 1 on pcib13 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xed800-0xf17ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ee400002100 [...] device_attach: est15 attach returned 6 [...] Timecounter "TSC-low" frequency 1498264480 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 numa-domain 0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1 numa-domain 0 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] mfid0 numa-domain 0 on mfi0 [...] mfid0: 762496MB (1561591808 sectors) RAID volume (no label) is optimal [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] Trying to mount root from cd9660:/dev/iso9660/OPNSENSE_INSTALL [ro]... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x8002> at usbus1 [...] uhub2 numa-domain 0 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x800a> at usbus0 [...] uhub3 numa-domain 0 on uhub0 [...] uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] ugen0.3: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub4 numa-domain 0 on uhub3 [...] uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0 [...] uhub4: 6 ports with 6 removable, self powered [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Ultra USB 3.0 (0x0781:0x5595) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Ultra USB 3.0 (0x0781:0x5595) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device SanDisk Ultra USB 3.0 (0x0781:0x5595) [...] ugen1.3: <SanDisk Ultra USB 3.0> at usbus1 [...] umass0 numa-domain 0 on uhub2 [...] umass0: <SanDisk Ultra USB 3.0, class 0/0, rev 2.10/1.00, addr 3> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:12:0: Attached to scbus12 [...] da0 at umass-sim0 bus 0 scbus12 target 0 lun 0 [...] da0: <SanDisk Ultra USB 3.0 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 58656MB (120127488 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.4: <Avocent Keyboard/Mouse Function> at usbus0 [...] ukbd0 numa-domain 0 on uhub4 [...] ukbd0: <Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] ums0 numa-domain 0 on uhub4 [...] ums0: <Mouse> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] ums1 numa-domain 0 on uhub4 [...] ums1: <Mouse REL> on usbus0 [...] ums1: 3 buttons and [XYZ] coordinates ID=0 [...] bge0: link state changed to DOWN [...] bge1: link state changed to DOWN [...] bge2: link state changed to DOWN [...] bge3: link state changed to DOWN [...] bge0: link state changed to UP [...] bge1: link state changed to UP [...] bge2: link state changed to UP [...] bge3: link state changed to UP [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] mfi0: IOCTL 0x40086481 not handled [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mfi0: Failed to get command [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p1 stable/23.7-n254737-f223233eef4 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2623 v3 @ 3.00GHz (2996.62-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33232637952 (31693 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 1 12 10 14 2 9 11 4 5 6 8 3 13 15 7 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfe300-0xfe31e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pcib1: <ACPI Host-PCI bridge> on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Invader> port 0x3000-0x30ff mem 0x92000000-0x9200ffff,0x91f00000-0x91ffffff irq 26 at device 0.0 numa-domain 0 on pci3 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 928, limiting to 128 [...] mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 [...] mfi0: 5344 (755152055s/0x0020/info) - Shutdown command received from host [...] mfi0: 5345 (boot + 11s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f49/1028) [...] mfi0: 5346 (boot + 11s/0x0020/info) - Firmware version 4.300.00-8368 [...] mfi0: 5347 (boot + 13s/0x0008/info) - Battery Present [...] mfi0: 5348 (boot + 13s/0x0020/CRIT) - Disabling writes to flash as the part has gone bad [...] pcib4: <ACPI PCI-PCI bridge> irq 47 at device 3.0 numa-domain 0 on pci2 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] ix0: <Intel(R) X520 82599 (Dual SFP+)> port 0x2020-0x203f mem 0x91d00000-0x91dfffff,0x91e04000-0x91e07fff irq 40 at device 0.0 numa-domain 0 on pci4 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: Option ROM V19-b5-p12 eTrack 0x8000095d PHY FW V65535 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X520 82599 (Dual SFP+)> port 0x2000-0x201f mem 0x91c00000-0x91cfffff,0x91e00000-0x91e03fff irq 44 at device 0.1 numa-domain 0 on pci4 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: Option ROM V19-b5-p12 eTrack 0x8000095d PHY FW V65535 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib5: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci2 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pci2: <unknown> at device 17.0 (no driver attached) [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0x4078-0x407f,0x408c-0x408f,0x4070-0x4077,0x4088-0x408b,0x4040-0x405f mem 0x92101000-0x921017ff irq 16 at device 17.4 numa-domain 0 on pci2 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pci2: <simple comms> at device 22.0 (no driver attached) [...] pci2: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x92103000-0x921033ff irq 18 at device 26.0 numa-domain 0 on pci2 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.1 numa-domain 0 on pci2 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pcib8: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci6 [...] pci7: <PCI bus> numa-domain 0 on pcib8 [...] pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci7 [...] pci8: <PCI bus> numa-domain 0 on pcib9 [...] pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 [...] pci9: <PCI bus> numa-domain 0 on pcib10 [...] vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 17 at device 0.0 numa-domain 0 on pci9 [...] vgapci0: Boot video device [...] pcib11: <ACPI PCI-PCI bridge> irq 18 at device 28.2 numa-domain 0 on pci2 [...] pci10: <ACPI PCI bus> numa-domain 0 on pcib11 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a30000-0x91a3ffff,0x91a40000-0x91a4ffff,0x91a50000-0x91a5ffff irq 18 at device 0.0 numa-domain 0 on pci10 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> numa-domain 0 on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a00000-0x91a0ffff,0x91a10000-0x91a1ffff,0x91a20000-0x91a2ffff irq 19 at device 0.1 numa-domain 0 on pci10 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> numa-domain 0 on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pcib12: <ACPI PCI-PCI bridge> irq 19 at device 28.3 numa-domain 0 on pci2 [...] pci11: <ACPI PCI bus> numa-domain 0 on pcib12 [...] bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91b30000-0x91b3ffff,0x91b40000-0x91b4ffff,0x91b50000-0x91b5ffff irq 19 at device 0.0 numa-domain 0 on pci11 [...] bge2: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge2: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus2: <MII bus> numa-domain 0 on bge2 [...] brgphy2: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus2 [...] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge2: Using defaults for TSO: 65518/35/2048 [...] bge2: Ethernet address: ... [...] bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91b00000-0x91b0ffff,0x91b10000-0x91b1ffff,0x91b20000-0x91b2ffff irq 16 at device 0.1 numa-domain 0 on pci11 [...] bge3: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge3: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus3: <MII bus> numa-domain 0 on bge3 [...] brgphy3: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus3 [...] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge3: Using defaults for TSO: 65518/35/2048 [...] bge3: Ethernet address: ... [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x92102000-0x921023ff irq 18 at device 29.0 numa-domain 0 on pci2 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci1: <Intel Wellsburg AHCI SATA controller> port 0x4068-0x406f,0x4084-0x4087,0x4060-0x4067,0x4080-0x4083,0x4020-0x403f mem 0x92100000-0x921007ff irq 16 at device 31.2 numa-domain 0 on pci2 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahcich7: <AHCI channel> at channel 3 on ahci1 [...] ahcich8: <AHCI channel> at channel 4 on ahci1 [...] ahcich9: <AHCI channel> at channel 5 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] pcib13: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci12: <ACPI PCI bus> numa-domain 1 on pcib13 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xed800-0xf17ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est15 attach returned 6 [...] Timecounter "TSC-low" frequency 1498264482 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] mfid0 numa-domain 0 on mfi0 [...] mfid0: 762496MB (1561591808 sectors) RAID volume (no label) is optimal [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 numa-domain 0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 numa-domain 0 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x8002> at usbus1 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x800a> at usbus0 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] ugen0.3: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub4 numa-domain 0 on uhub3 [...] uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0 [...] uhub4: 6 ports with 6 removable, self powered [...] ugen0.4: <Avocent Keyboard/Mouse Function> at usbus0 [...] ukbd0 numa-domain 0 on uhub4 [...] ukbd0: <Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] ums0 numa-domain 0 on uhub4 [...] ums0: <Mouse> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] ums1 numa-domain 0 on uhub4 [...] ums1: <Mouse REL> on usbus0 [...] ums1: 3 buttons and [XYZ] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] bge0: link state changed to DOWN [...] bge1: link state changed to DOWN [...] bge2: link state changed to DOWN [...] bge3: link state changed to DOWN [...] bge0: link state changed to UP [...] bge1: link state changed to UP [...] bge2: link state changed to UP [...] bge3: link state changed to UP [...] ix0: link state changed to UP [...] [fib_algo] inet.0 (bsearch4#48) rebuild_fd_flm: switching algo to radix4_lockless [...] vlan0: changing name to 'vlan01' [...] vlan1: changing name to 'vlan02' [...] vlan2: changing name to 'vlan03' [...] vlan3: changing name to 'vlan04' [...] vlan4: changing name to 'vlan05' [...] mfi0: Failed to get command [...] pid 66360 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 66603 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 66831 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 66843 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 67042 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 67282 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 67289 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 67296 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 67570 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 67880 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 67954 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 68020 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 68190 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 68400 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 68547 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 68666 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 68687 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 69005 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 69093 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 69270 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 69413 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 69450 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 69797 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 70031 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 70312 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 70618 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 70651 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 70750 (sleep), jid 0, uid 0: exited on signal 10 (core dumped) [...] pid 70927 (sleep), jid 0, uid 0: exited on signal 11 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p5 stable/23.7-n254837-8806e8fefb1 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2623 v3 @ 3.00GHz (2996.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33232637952 (31693 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 1 10 5 3 6 11 13 7 4 2 9 8 15 14 12 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfe300-0xfe31e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pcib1: <ACPI Host-PCI bridge> on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Invader> port 0x3000-0x30ff mem 0x92000000-0x9200ffff,0x91f00000-0x91ffffff irq 26 at device 0.0 numa-domain 0 on pci3 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 928, limiting to 128 [...] mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 [...] mfi0: 5363 (755156969s/0x0020/info) - Shutdown command received from host [...] mfi0: 5364 (boot + 11s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f49/1028) [...] mfi0: 5365 (boot + 11s/0x0020/info) - Firmware version 4.300.00-8368 [...] mfi0: 5366 (boot + 12s/0x0008/info) - Battery Present [...] mfi0: 5367 (boot + 12s/0x0020/CRIT) - Disabling writes to flash as the part has gone bad [...] pcib4: <ACPI PCI-PCI bridge> irq 47 at device 3.0 numa-domain 0 on pci2 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] ix0: <Intel(R) X520 82599 (Dual SFP+)> port 0x2020-0x203f mem 0x91d00000-0x91dfffff,0x91e04000-0x91e07fff irq 40 at device 0.0 numa-domain 0 on pci4 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: Option ROM V19-b5-p12 eTrack 0x8000095d PHY FW V65535 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X520 82599 (Dual SFP+)> port 0x2000-0x201f mem 0x91c00000-0x91cfffff,0x91e00000-0x91e03fff irq 44 at device 0.1 numa-domain 0 on pci4 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: Option ROM V19-b5-p12 eTrack 0x8000095d PHY FW V65535 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib5: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci2 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pci2: <unknown> at device 17.0 (no driver attached) [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0x4078-0x407f,0x408c-0x408f,0x4070-0x4077,0x4088-0x408b,0x4040-0x405f mem 0x92101000-0x921017ff irq 16 at device 17.4 numa-domain 0 on pci2 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pci2: <simple comms> at device 22.0 (no driver attached) [...] pci2: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x92103000-0x921033ff irq 18 at device 26.0 numa-domain 0 on pci2 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.1 numa-domain 0 on pci2 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pcib8: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci6 [...] pci7: <PCI bus> numa-domain 0 on pcib8 [...] pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci7 [...] pci8: <PCI bus> numa-domain 0 on pcib9 [...] pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 [...] pci9: <PCI bus> numa-domain 0 on pcib10 [...] vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 17 at device 0.0 numa-domain 0 on pci9 [...] vgapci0: Boot video device [...] pcib11: <ACPI PCI-PCI bridge> irq 18 at device 28.2 numa-domain 0 on pci2 [...] pci10: <ACPI PCI bus> numa-domain 0 on pcib11 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a30000-0x91a3ffff,0x91a40000-0x91a4ffff,0x91a50000-0x91a5ffff irq 18 at device 0.0 numa-domain 0 on pci10 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> numa-domain 0 on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a00000-0x91a0ffff,0x91a10000-0x91a1ffff,0x91a20000-0x91a2ffff irq 19 at device 0.1 numa-domain 0 on pci10 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> numa-domain 0 on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pcib12: <ACPI PCI-PCI bridge> irq 19 at device 28.3 numa-domain 0 on pci2 [...] pci11: <ACPI PCI bus> numa-domain 0 on pcib12 [...] bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91b30000-0x91b3ffff,0x91b40000-0x91b4ffff,0x91b50000-0x91b5ffff irq 19 at device 0.0 numa-domain 0 on pci11 [...] bge2: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge2: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus2: <MII bus> numa-domain 0 on bge2 [...] brgphy2: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus2 [...] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge2: Using defaults for TSO: 65518/35/2048 [...] bge2: Ethernet address: ... [...] bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91b00000-0x91b0ffff,0x91b10000-0x91b1ffff,0x91b20000-0x91b2ffff irq 16 at device 0.1 numa-domain 0 on pci11 [...] bge3: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge3: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus3: <MII bus> numa-domain 0 on bge3 [...] brgphy3: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus3 [...] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge3: Using defaults for TSO: 65518/35/2048 [...] bge3: Ethernet address: ... [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x92102000-0x921023ff irq 18 at device 29.0 numa-domain 0 on pci2 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci1: <Intel Wellsburg AHCI SATA controller> port 0x4068-0x406f,0x4084-0x4087,0x4060-0x4067,0x4080-0x4083,0x4020-0x403f mem 0x92100000-0x921007ff irq 16 at device 31.2 numa-domain 0 on pci2 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahcich7: <AHCI channel> at channel 3 on ahci1 [...] ahcich8: <AHCI channel> at channel 4 on ahci1 [...] ahcich9: <AHCI channel> at channel 5 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] pcib13: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci12: <ACPI PCI bus> numa-domain 1 on pcib13 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xed800-0xf17ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ebc00002100 [...] device_attach: est15 attach returned 6 [...] Timecounter "TSC-low" frequency 1498264544 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] mfid0 numa-domain 0 on mfi0 [...] mfid0: 762496MB (1561591808 sectors) RAID volume (no label) is optimal [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 numa-domain 0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1 numa-domain 0 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x8002> at usbus1 [...] uhub2 numa-domain 0 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x800a> at usbus0 [...] uhub3 numa-domain 0 on uhub0 [...] uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] ugen0.3: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub4 numa-domain 0 on uhub3 [...] uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0 [...] uhub4: 6 ports with 6 removable, self powered [...] ugen0.4: <Avocent Keyboard/Mouse Function> at usbus0 [...] ukbd0 numa-domain 0 on uhub4 [...] ukbd0: <Keyboard> on usbus0 [...] kbd2 at ukbd0