[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) [...] VT(vbefb): resolution 1280x1024 [...] CPU: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz (1800.15-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x6f2 Family=0x6 Model=0xf Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4107550720 (3917 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: < A1> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] smbios0: <System Management BIOS> at iomem 0xfa0e0-0xfa0fe [...] smbios0: Version: 2.5 [...] aesni0: No AES or SHA support. [...] acpi0: <> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfe8e0000-0xfe8fffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <Intel 82801G HDA Controller> mem 0xfe7fc000-0xfe7fffff irq 16 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ath0: <Atheros AR9485> mem 0xfe980000-0xfe9fffff irq 16 at device 0.0 on pci2 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: AR9485 mac 576.1 RF5110 phy 0.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 17 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x28000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc880-0xc89f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc480-0xc49f irq 16 at device 29.3 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus3 on uhci3 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe7fbc00-0xfe7fbfff irq 23 at device 29.7 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci0 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci4: <multimedia> at device 1.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] atapci1: <Intel ICH7 SATA300 controller> port 0xc400-0xc407,0xc080-0xc083,0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb88f irq 19 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ns8250: UART FCR is broken [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] est0: failed to enable SpeedStep [...] est1: failed to enable SpeedStep [...] Timecounter "TSC" frequency 1800063651 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 rev1 HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev1 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa0 [...] pcm1: <Realtek ALC662 rev1 (Onboard Digital)> at nid 30 on hdaa0 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] uhub0 on usbus4 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] Trying to mount root from cd9660:/dev/iso9660/LIVE []... [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] uhub1 on usbus3 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub2 on usbus2 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub3 on usbus0 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub4 on usbus1 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub4: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus4 CAM [...] ada0 at ata0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD400BB-00FRA0 77.07W77> ATA-6 device [...] ada0: Serial Number... [...] ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) [...] ada0: 38166MB (78165360 512 byte sectors) [...] ada1 at ata0 bus 0 scbus0 target 1 lun 0 [...] ada1: <MAXTOR STM380215A 3.AAD> ATA-7 device [...] ada1: Serial Number... [...] ada1: 100.000MB/s transfers (UDMA5, PIO 8192bytes) [...] ada1: 76319MB (156301488 512 byte sectors) [...] ada2 at ata2 bus 0 scbus1 target 0 lun 0 [...] ada2: <WDC WD800JD-08MSA1 10.01E01> ATA-7 SATA 2.x device [...] ada2: Serial Number... [...] ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada2: 76324MB (156312576 512 byte sectors) [...] GEOM_LABEL[1]: MSDOSFS: ada2: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada2s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2s1 is ntfs/stop%20posting%20about%20windows%20xp. [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada1: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1 is diskid/XXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label stop%20posting%20about%20windows%20xp(ntfs/stop%20posting%20about%20windows%20xp) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] random: unblocking device. [...] GEOM_LABEL[1]: MSDOSFS: ada0s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada1s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1s1 is ntfs/System%20Reserved. [...] GEOM_LABEL[1]: MSDOSFS: ada1s2: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label System%20Reserved(ntfs/System%20Reserved) already exists (diskid/XXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT32 volume not valid. [...] Root mount waiting for: usbus4 [...] uhub0: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus4 [...] ugen4.2: <Kingston DataTraveler 3.0> at usbus4 [...] umass0 on uhub0 [...] umass0: <Kingston DataTraveler 3.0, class 0/0, rev 2.10/1.10, addr 2> on usbus4 [...] umass0: SCSI over Bulk-Only; quirks = 0xc000 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Kingston DataTraveler 3.0 PMAP> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 29592MB (60604416 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM_LABEL[1]: MSDOSFS: da0: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider da0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM: ventoy/IMAGE: the secondary GPT table is corrupt or invalid. [...] GEOM: ventoy/IMAGE: using the primary only -- recovery suggested. [...] GEOM_LABEL[1]: ISO9660 file system detected on ventoy/IMAGE. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGE is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGE: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: da0s1: no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: da0s2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0s2 is msdosfs/VTOYEFI. [...] GEOM_LABEL[1]: MSDOSFS: da0s3: FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: da0s3: FAT32 volume has no name. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp1 is gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp2 is gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp2 is msdosfs/EFISYS. [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label VTOYEFI(msdosfs/VTOYEFI) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume has no name. [...] GEOM_LABEL[1]: Label HASH_A6C-8A82-B15F-2118-77A70ED453A2(gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_C10-F528-E24E-32D2-F2B3F220F3C0(gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] Root mount waiting for: usbus4 [...] ugen1.2: <Genius Optical Mouse> at usbus1 [...] ugen1.3: <vendor 0x2a7a CASUE USB KB> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <vendor 0x2a7a CASUE USB KB, class 0/0, rev 1.10/0.01, addr 3> on usbus1 [...] kbd2 at ukbd0 [...] GEOM_LABEL[1]: MSDOSFS: md0: no FAT signature found. [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: Label for provider md0.uzip is ufsid/XXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: MSDOSFS: md0.uzip: no FAT signature found. [...] Cuse v0.1.37 @ /dev/cuse [...] ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x400-0x41f irq 19 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] [drm] radeon kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68A9 0x13CC:0x3D1E 0x00). [...] [drm ERROR :radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO [...] ATOM BIOS: BARCO [...] drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [...] drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [...] [drm] Detected VRAM RAM=1024M, BAR=256M [...] [drm] RAM width 128bits DDR [...] [TTM] Zone kernel: Available graphics memory: 2077618 KiB [...] [TTM] Initializing pool allocator [...] [drm] radeon: 1024M of VRAM memory ready [...] [drm] radeon: 1024M of GTT memory ready. [...] [drm] Loading JUNIPER Microcode [...] drmn0: successfully loaded firmware image 'radeon/JUNIPER_pfp.bin' [...] drmn0: successfully loaded firmware image 'radeon/JUNIPER_me.bin' [...] drmn0: successfully loaded firmware image 'radeon/JUNIPER_rlc.bin' [...] drmn0: successfully loaded firmware image 'radeon/JUNIPER_smc.bin' [...] [drm] Internal thermal controller with fan control [...] [drm] radeon: dpm initialized [...] drmn0: successfully loaded firmware image 'radeon/CYPRESS_uvd.bin' [...] [drm] GART: num cpu pages 262144, num gpu pages 262144 [...] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [...] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [...] drmn0: WB enabled [...] drmn0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [...] drmn0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [...] drmn0: fence driver on ring 5 use gpu addr 0x000000000005c418 [...] drmn0: radeon: MSI limited to 32-bit [...] drmn0: radeon: using MSI. [...] [drm] radeon: irq initialized. [...] [drm] ring test on 0 succeeded in 1 usecs [...] [drm] ring test on 3 succeeded in 2 usecs [...] [drm] ring test on 5 succeeded in 1 usecs [...] [drm] UVD initialized successfully. [...] [drm] ib test on ring 0 succeeded in 0 usecs [...] [drm] ib test on ring 3 succeeded in 0 usecs [...] [drm] ib test on ring 5 succeeded [...] lkpi_iicbb0: <LinuxKPI I2CBB> on drmn0 [...] iicbb0: <I2C bit-banging driver> on lkpi_iicbb0 [...] iicbus0: <Philips I2C bus> on iicbb0 addr 0xff [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iicbb1: <LinuxKPI I2CBB> on drmn0 [...] iicbb1: <I2C bit-banging driver> on lkpi_iicbb1 [...] iicbus1: <Philips I2C bus> on iicbb1 addr 0xff [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iicbb2: <LinuxKPI I2CBB> on drmn0 [...] iicbb2: <I2C bit-banging driver> on lkpi_iicbb2 [...] iicbus2: <Philips I2C bus> on iicbb2 addr 0xff [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iicbb3: <LinuxKPI I2CBB> on drmn0 [...] iicbb3: <I2C bit-banging driver> on lkpi_iicbb3 [...] iicbus3: <Philips I2C bus> on iicbb3 addr 0xff [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iicbb4: <LinuxKPI I2CBB> on drmn0 [...] iicbb4: <I2C bit-banging driver> on lkpi_iicbb4 [...] iicbus4: <Philips I2C bus> on iicbb4 addr 0xff [...] iic4: <I2C generic I/O> on iicbus4 [...] lkpi_iicbb5: <LinuxKPI I2CBB> on drmn0 [...] iicbb5: <I2C bit-banging driver> on lkpi_iicbb5 [...] iicbus5: <Philips I2C bus> on iicbb5 addr 0xff [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iicbb6: <LinuxKPI I2CBB> on drmn0 [...] iicbb6: <I2C bit-banging driver> on lkpi_iicbb6 [...] iicbus6: <Philips I2C bus> on iicbb6 addr 0xff [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iicbb7: <LinuxKPI I2CBB> on drmn0 [...] iicbb7: <I2C bit-banging driver> on lkpi_iicbb7 [...] iicbus7: <Philips I2C bus> on iicbb7 addr 0xff [...] iic7: <I2C generic I/O> on iicbus7 [...] lkpi_iic0: <LinuxKPI I2C> on drm1 [...] iicbus8: <Philips I2C bus> on lkpi_iic0 [...] iic8: <I2C generic I/O> on iicbus8 [...] lkpi_iic1: <LinuxKPI I2C> on drm2 [...] iicbus9: <Philips I2C bus> on lkpi_iic1 [...] iic9: <I2C generic I/O> on iicbus9 [...] [drm] Radeon Display Connectors [...] [drm] Connector 0: [...] [drm] DP-1 [...] [drm] HPD4 [...] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY2 [...] [drm] Connector 1: [...] [drm] DP-2 [...] [drm] HPD5 [...] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [...] [drm] Encoders: [...] [drm] DFP2: INTERNAL_UNIPHY2 [...] [drm] Connector 2: [...] [drm] DVI-I-1 [...] [drm] HPD1 [...] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [...] [drm] Encoders: [...] [drm] DFP3: INTERNAL_UNIPHY1 [...] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [...] [drm] fb mappable at 0xD034D000 [...] [drm] vram apper at 0xD0000000 [...] [drm] size 5324800 [...] [drm] fb depth is 24 [...] [drm] pitch is 5888 [...] VT: Replacing driver "vbefb" with new "fb". [...] start FB_INFO: [...] type=11 height=900 width=1440 depth=32 [...] pbase=0xd034d000 vbase=0xfffff800d034d000 [...] name=drmn0 flags=0x0 stride=5888 bpp=32 [...] end FB_INFO [...] [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 [...] re0: link state changed to UP [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ums0 on uhub4 [...] ums0: <Genius Optical Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub4 [...] uhid0: <vendor 0x2a7a CASUE USB KB, class 0/0, rev 1.10/0.01, addr 3> on usbus1 [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/stop%20posting%20about%20windows%20xp removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/System%20Reserved removed.