[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz (3498.04-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16478629888 (15715 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 1 3 [...] Timecounter "TSC-low" frequency 1749021900 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000058 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd01fffff,0xdfc00000-0xdfc3ffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xdfc60000-0xdfc63fff irq 17 at device 0.1 on pci1 [...] vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xdf800000-0xdfbfffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 [...] hdac1: <Intel Haswell HDA Controller> mem 0xdfd34000-0xdfd37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Wildcat Point USB 3.0 controller> mem 0xdfd20000-0xdfd2ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xdfd00000-0xdfd1ffff,0xdfd3c000-0xdfd3cfff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Wildcat Point USB 2.0 controller USB-B> mem 0xdfd3b000-0xdfd3b3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac2: <Intel Wildcat Point HDA Controller> mem 0xdfd30000-0xdfd33fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 18 at device 3.0 on pci4 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci4 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 7.0 on pci4 [...] pci8: <ACPI PCI bus> on pcib8 [...] ehci1: <Intel Wildcat Point USB 2.0 controller USB-A> mem 0xdfd3a000-0xdfd3a3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xdfd39000-0xdfd397ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Intel Haswell HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Intel Haswell Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] hdacc2: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac2 [...] hdaa2: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc2 [...] pcm5: <Realtek ALC1150 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa2 [...] pcm6: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa2 [...] pcm7: <Realtek ALC1150 (Internal Digital)> at nid 17 on hdaa2 [...] pcm8: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa2 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus0 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 860 EVO 500GB RVT01B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <PLEXTOR PX-128M5S 1.02> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 122104MB (250069680 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Root mount waiting for:uhub2: 2 ports with 2 removable, self powered [...] usbus0 usbus1 usbus2 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 21 ports with 21 removable, self powered [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.2: <vendor 0x8087 product 0x8009> at usbus1 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8001> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ugen0.3: <Lite-On Technology USB 1.1 2port downstream low power hub> at usbus0 [...] uhub5 on uhub1 [...] uhub5: <USB 1.1 2port downstream low power hub> on usbus0 [...] uhub5: 3 ports with 2 removable, bus powered [...] Root mount waiting for: usbus0 [...] ugen0.4: <Lite-On Technology USB Productivity Option Keyboard( has the hub in 1 )> at usbus0 [...] ukbd1 on uhub5 [...] ukbd1: <USB Productivity Option Keyboard( has the hub in 1 )> on usbus0 [...] kbd3 at ukbd1 [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1462:0x3413 0xC7). [...] [drm] register mmio base: 0xDFC00000 [...] [drm] register mmio size: 262144 [...] [drm] add ip block number 0 <vi_common> [...] [drm] add ip block number 1 <gmc_v8_0> [...] [drm] add ip block number 2 <tonga_ih> [...] [drm] add ip block number 3 <gfx_v8_0> [...] [drm] add ip block number 4 <sdma_v3_0> [...] [drm] add ip block number 5 <powerplay> [...] [drm] add ip block number 6 <dm> [...] [drm] add ip block number 7 <uvd_v6_0> [...] [drm] add ip block number 8 <vce_v3_0> [...] ATOM BIOS: 113-V34111-F1 [...] [drm] UVD is enabled in VM mode [...] [drm] UVD ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin' [...] drmn0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [...] drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [...] Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer [...] [drm] Detected VRAM RAM=8192M, BAR=256M [...] [drm] RAM width 256bits GDDR5 [...] [TTM] Zone kernel: Available graphics memory: 8304202 KiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 8192M of VRAM memory ready [...] [drm] amdgpu: 8192M of GTT memory ready. [...] [drm] GART: num cpu pages 65536, num gpu pages 65536 [...] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin' [...] [drm] Chained IB support enabled! [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin' [...] amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin' [...] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin' [...] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_smc.bin' [...] [drm] DM_PPLIB: values for Engine clock [...] [drm] DM_PPLIB: 300000 [...] [drm] DM_PPLIB: 608000 [...] [drm] DM_PPLIB: 910000 [...] [drm] DM_PPLIB: 1077000 [...] [drm] DM_PPLIB: 1145000 [...] [drm] DM_PPLIB: 1191000 [...] [drm] DM_PPLIB: 1236000 [...] [drm] DM_PPLIB: 1303000 [...] [drm] DM_PPLIB: Validation clocks: [...] [drm] DM_PPLIB: engine_max_clock: 130300 [...] [drm] DM_PPLIB: memory_max_clock: 200000 [...] [drm] DM_PPLIB: level : 8 [...] [drm] DM_PPLIB: values for Memory clock [...] [drm] DM_PPLIB: 300000 [...] [drm] DM_PPLIB: 2000000 [...] [drm] DM_PPLIB: Validation clocks: [...] [drm] DM_PPLIB: engine_max_clock: 130300 [...] [drm] DM_PPLIB: memory_max_clock: 200000 [...] [drm] DM_PPLIB: level : 8 [...] [drm] Display Core initialized with v3.2.48! [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-D-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-D-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] UVD and UVD ENC initialized successfully. [...] [drm] VCE initialized successfully. [...] [drm] fb mappable at 0xC0830000 [...] [drm] vram apper at 0xC0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xc0830000 vbase=0xfffff800c0830000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: amdgpudrmfb frame buffer device [...] [drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0 [...] ichsmb0: <Intel Wildcat Point SMBus controller> port 0xf040-0xf05f mem 0xdfd38000-0xdfd380ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] lo0: link state changed to UP [...] ums0 on uhub1 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub1 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on usbus0 [...] uhid1 on uhub5 [...] uhid1: <USB Productivity Option Keyboard( has the hub in 1 )> on usbus0 [...] em0: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Limiting closed port RST response from 203 to 200 packets/sec [...] [drm] enabling link 1 failed: 15 [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:3:0: Attached to scbus3 [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 (disconnected) [...] umass0: at uhub1, port 2, addr 4 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] pid 1298 (bsdisks), jid 0, uid 0: exited on signal 11 (core dumped) [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:3:0: Attached to scbus3 [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] umass0: at uhub1, port 2, addr 5 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:3:0: Attached to scbus3 [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 (disconnected) [...] umass0: at uhub1, port 2, addr 5 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc101 [...] umass0:3:0: Attached to scbus3 [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 (disconnected) [...] umass0: at uhub1, port 2, addr 6 (disconnected) [...] (cd0:umass-sim0:0:0:0): got CAM status 0x44 [...] (cd0:umass-sim0:0:0:0): fatal error, failed to attach to device [...] g_dev_taste: g_dev_taste(cd0) failed to g_attach, error=6 [...] umass0: detached [...] uhub_reattach_port: giving up port 2 reset - device vanished: change 0x1 status 0x6a0 [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:3:0: Attached to scbus3 [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 (disconnected) [...] umass0: at uhub1, port 2, addr 7 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:3:0: Attached to scbus3 [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] umass0: at uhub1, port 2, addr 8 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] usbd_req_re_enumerate: addr=8, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_TIMEOUT [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:3:0: Attached to scbus3 [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 (disconnected) [...] umass0: at uhub1, port 2, addr 8 (disconnected) [...] (cd0:umass-sim0:0:0:0): got CAM status 0x44 [...] (cd0:umass-sim0:0:0:0): fatal error, failed to attach to device [...] g_dev_taste: g_dev_taste(cd0) failed to g_attach, error=6 [...] umass0: detached [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:3:0: Attached to scbus3 [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 (disconnected) [...] umass0: at uhub1, port 2, addr 9 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:3:0: Attached to scbus3 [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] umass0: at uhub1, port 2, addr 10 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] usbd_req_re_enumerate: addr=10, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 10 failed, USB_ERR_TIMEOUT [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:3:0: Attached to scbus3 [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 (disconnected) [...] umass0: at uhub1, port 2, addr 10 (disconnected) [...] (cd0:umass-sim0:0:0:0): got CAM status 0x50 [...] (cd0:umass-sim0:0:0:0): fatal error, failed to attach to device [...] g_dev_taste: g_dev_taste(cd0) failed to g_attach, error=6 [...] umass0: detached [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:3:0: Attached to scbus3 [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 (disconnected) [...] umass0: at uhub1, port 2, addr 11 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:3:0: Attached to scbus3 [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] umass0: at uhub1, port 2, addr 12 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] usbd_req_re_enumerate: addr=12, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 12 failed, USB_ERR_TIMEOUT [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:3:0: Attached to scbus3 [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 (disconnected) [...] umass0: at uhub1, port 2, addr 12 (disconnected) [...] (cd0:umass-sim0:0:0:0): got CAM status 0x50 [...] (cd0:umass-sim0:0:0:0): fatal error, failed to attach to device [...] g_dev_taste: g_dev_taste(cd0) failed to g_attach, error=6 [...] umass0: detached [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 [...] umass0 on uhub1 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:3:0: Attached to scbus3 [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] uhub0: at usbus2, port 1, addr 1 (disconnected) [...] ugen2.2: <vendor 0x8087 product 0x8001> at usbus2 (disconnected) [...] uhub4: at uhub0, port 1, addr 2 (disconnected) [...] uhub4: detached [...] uhub0: detached [...] uhub2: at usbus1, port 1, addr 1 (disconnected) [...] ugen1.2: <vendor 0x8087 product 0x8009> at usbus1 (disconnected) [...] uhub3: at uhub2, port 1, addr 2 (disconnected) [...] uhub3: detached [...] uhub2: detached [...] uhub1: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Logitech USB Receiver> at usbus0 (disconnected) [...] ukbd0: at uhub1, port 1, addr 1 (disconnected) [...] ukbd0: detached [...] ums0: at uhub1, port 1, addr 1 (disconnected) [...] ums0: detached [...] uhid0: at uhub1, port 1, addr 1 (disconnected) [...] uhid0: detached [...] ugen0.5: <HMD Global Nokia 7 plus> at usbus0 (disconnected) [...] umass0: at uhub1, port 2, addr 13 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0404> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.3: <Lite-On Technology USB 1.1 2port downstream low power hub> at usbus0 (disconnected) [...] uhub5: at uhub1, port 9, addr 2 (disconnected) [...] ugen0.4: <Lite-On Technology USB Productivity Option Keyboard( has the hub in 1 )> at usbus0 (disconnected) [...] ukbd1: at uhub5, port 1, addr 3 (disconnected) [...] ukbd1: detached [...] uhid1: at uhub5, port 1, addr 3 (disconnected) [...] uhid1: detached [...] uhub5: detached [...] uhub1: detached [...] vgapci0: child drmn0 requested pci_set_powerstate [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_get_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000). [...] [drm] UVD and UVD ENC initialized successfully. [...] [drm] VCE initialized successfully. [...] xhci0: Port routing mask set to 0xffffffff [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] em0: link state changed to DOWN [...] uhub0: 21 ports with 21 removable, self powered [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub0 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on usbus0 [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen0.3: <Lite-On Technology USB 1.1 2port downstream low power hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <USB 1.1 2port downstream low power hub> on usbus0 [...] uhub3: 3 ports with 2 removable, bus powered [...] ugen2.2: <vendor 0x8087 product 0x8001> at usbus2 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8009> at usbus1 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] em0: link state changed to UP [...] uhub5: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ugen0.4: <Lite-On Technology USB Productivity Option Keyboard( has the hub in 1 )> at usbus0 [...] ukbd1 on uhub3 [...] ukbd1: <USB Productivity Option Keyboard( has the hub in 1 )> on usbus0 [...] kbd3 at ukbd1 [...] uhid1 on uhub3 [...] uhid1: <USB Productivity Option Keyboard( has the hub in 1 )> on usbus0 [...] [drm] enabling link 1 failed: 15