[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267992-a8a728bd015 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0x12 to 0x28 [...] CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.74-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16497090560 (15732 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> mem 0xf7c00000-0xf7c1ffff irq 16 at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 16 at device 4.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> irq 17 at device 5.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] igb0: <Intel(R) I350 (Copper)> mem 0xf7b60000-0xf7b7ffff,0xf7b8c000-0xf7b8ffff irq 17 at device 0.0 on pci4 [...] igb0: EEPROM V1.63-0 eTrack 0x800009fb [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xf7b40000-0xf7b5ffff,0xf7b88000-0xf7b8bfff irq 18 at device 0.1 on pci4 [...] igb1: EEPROM V1.63-0 eTrack 0x800009fb [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xf7b20000-0xf7b3ffff,0xf7b84000-0xf7b87fff irq 19 at device 0.2 on pci4 [...] igb2: EEPROM V1.63-0 eTrack 0x800009fb [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xf7b00000-0xf7b1ffff,0xf7b80000-0xf7b83fff irq 16 at device 0.3 on pci4 [...] igb3: EEPROM V1.63-0 eTrack 0x800009fb [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <PCI-PCI bridge> irq 18 at device 6.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] igb4: <Intel(R) I350 (Copper)> mem 0xf7a60000-0xf7a7ffff,0xf7a8c000-0xf7a8ffff irq 18 at device 0.0 on pci5 [...] igb4: EEPROM V1.63-0 eTrack 0x800009fb [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb5: <Intel(R) I350 (Copper)> mem 0xf7a40000-0xf7a5ffff,0xf7a88000-0xf7a8bfff irq 19 at device 0.1 on pci5 [...] igb5: EEPROM V1.63-0 eTrack 0x800009fb [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 4 RX queues 4 TX queues [...] igb5: Using MSI-X interrupts with 5 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb6: <Intel(R) I350 (Copper)> mem 0xf7a20000-0xf7a3ffff,0xf7a84000-0xf7a87fff irq 16 at device 0.2 on pci5 [...] igb6: EEPROM V1.63-0 eTrack 0x800009fb [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 4 RX queues 4 TX queues [...] igb6: Using MSI-X interrupts with 5 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb7: <Intel(R) I350 (Copper)> mem 0xf7a00000-0xf7a1ffff,0xf7a80000-0xf7a83fff irq 17 at device 0.3 on pci5 [...] igb7: EEPROM V1.63-0 eTrack 0x800009fb [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 4 RX queues 4 TX queues [...] igb7: Using MSI-X interrupts with 5 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> mem 0xf7900000-0xf791ffff irq 17 at device 0.0 on pci6 [...] pci7: <PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 17 at device 4.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> irq 18 at device 5.0 on pci7 [...] pci9: <PCI bus> on pcib9 [...] igb8: <Intel(R) I350 (Fiber)> mem 0xf7860000-0xf787ffff,0xf788c000-0xf788ffff irq 18 at device 0.0 on pci9 [...] igb8: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 4 RX queues 4 TX queues [...] igb8: Using MSI-X interrupts with 5 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb9: <Intel(R) I350 (Fiber)> mem 0xf7840000-0xf785ffff,0xf7888000-0xf788bfff irq 19 at device 0.1 on pci9 [...] igb9: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 4 RX queues 4 TX queues [...] igb9: Using MSI-X interrupts with 5 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb10: <Intel(R) I350 (Fiber)> mem 0xf7820000-0xf783ffff,0xf7884000-0xf7887fff irq 16 at device 0.2 on pci9 [...] igb10: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb10: Using 1024 TX descriptors and 1024 RX descriptors [...] igb10: Using 4 RX queues 4 TX queues [...] igb10: Using MSI-X interrupts with 5 vectors [...] igb10: Ethernet address: ... [...] igb10: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb11: <Intel(R) I350 (Fiber)> mem 0xf7800000-0xf781ffff,0xf7880000-0xf7883fff irq 17 at device 0.3 on pci9 [...] igb11: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb11: Using 1024 TX descriptors and 1024 RX descriptors [...] igb11: Using 4 RX queues 4 TX queues [...] igb11: Using MSI-X interrupts with 5 vectors [...] igb11: Ethernet address: ... [...] igb11: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib10: <PCI-PCI bridge> irq 19 at device 6.0 on pci7 [...] pci10: <PCI bus> on pcib10 [...] igb12: <Intel(R) I350 (Fiber)> mem 0xf7760000-0xf777ffff,0xf778c000-0xf778ffff irq 19 at device 0.0 on pci10 [...] igb12: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb12: Using 1024 TX descriptors and 1024 RX descriptors [...] igb12: Using 4 RX queues 4 TX queues [...] igb12: Using MSI-X interrupts with 5 vectors [...] igb12: Ethernet address: ... [...] igb12: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb13: <Intel(R) I350 (Fiber)> mem 0xf7740000-0xf775ffff,0xf7788000-0xf778bfff irq 16 at device 0.1 on pci10 [...] igb13: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb13: Using 1024 TX descriptors and 1024 RX descriptors [...] igb13: Using 4 RX queues 4 TX queues [...] igb13: Using MSI-X interrupts with 5 vectors [...] igb13: Ethernet address: ... [...] igb13: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb14: <Intel(R) I350 (Fiber)> mem 0xf7720000-0xf773ffff,0xf7784000-0xf7787fff irq 17 at device 0.2 on pci10 [...] igb14: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb14: Using 1024 TX descriptors and 1024 RX descriptors [...] igb14: Using 4 RX queues 4 TX queues [...] igb14: Using MSI-X interrupts with 5 vectors [...] igb14: Ethernet address: ... [...] igb14: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb15: <Intel(R) I350 (Fiber)> mem 0xf7700000-0xf771ffff,0xf7780000-0xf7783fff irq 18 at device 0.3 on pci10 [...] igb15: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb15: Using 1024 TX descriptors and 1024 RX descriptors [...] igb15: Using 4 RX queues 4 TX queues [...] igb15: Using MSI-X interrupts with 5 vectors [...] igb15: Ethernet address: ... [...] igb15: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7e00000-0xf7e0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7e14000-0xf7e143ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] pcib12: <ACPI PCI-PCI bridge> mem 0xf7600000-0xf761ffff irq 16 at device 0.0 on pci11 [...] pci12: <ACPI PCI bus> on pcib12 [...] pcib13: <PCI-PCI bridge> irq 16 at device 4.0 on pci12 [...] pci13: <PCI bus> on pcib13 [...] pcib14: <PCI-PCI bridge> irq 17 at device 5.0 on pci12 [...] pci14: <PCI bus> on pcib14 [...] igb16: <Intel(R) I350 (Copper)> mem 0xf7560000-0xf757ffff,0xf758c000-0xf758ffff irq 17 at device 0.0 on pci14 [...] igb16: EEPROM V1.63-0 eTrack 0x800009fb [...] igb16: Using 1024 TX descriptors and 1024 RX descriptors [...] igb16: Using 4 RX queues 4 TX queues [...] igb16: Using MSI-X interrupts with 5 vectors [...] igb16: Ethernet address: ... [...] igb16: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb17: <Intel(R) I350 (Copper)> mem 0xf7540000-0xf755ffff,0xf7588000-0xf758bfff irq 18 at device 0.1 on pci14 [...] igb17: EEPROM V1.63-0 eTrack 0x800009fb [...] igb17: Using 1024 TX descriptors and 1024 RX descriptors [...] igb17: Using 4 RX queues 4 TX queues [...] igb17: Using MSI-X interrupts with 5 vectors [...] igb17: Ethernet address: ... [...] igb17: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb18: <Intel(R) I350 (Copper)> mem 0xf7520000-0xf753ffff,0xf7584000-0xf7587fff irq 19 at device 0.2 on pci14 [...] igb18: EEPROM V1.63-0 eTrack 0x800009fb [...] igb18: Using 1024 TX descriptors and 1024 RX descriptors [...] igb18: Using 4 RX queues 4 TX queues [...] igb18: Using MSI-X interrupts with 5 vectors [...] igb18: Ethernet address: ... [...] igb18: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb19: <Intel(R) I350 (Copper)> mem 0xf7500000-0xf751ffff,0xf7580000-0xf7583fff irq 16 at device 0.3 on pci14 [...] igb19: EEPROM V1.63-0 eTrack 0x800009fb [...] igb19: Using 1024 TX descriptors and 1024 RX descriptors [...] igb19: Using 4 RX queues 4 TX queues [...] igb19: Using MSI-X interrupts with 5 vectors [...] igb19: Ethernet address: ... [...] igb19: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib15: <PCI-PCI bridge> irq 18 at device 6.0 on pci12 [...] pci15: <PCI bus> on pcib15 [...] igb20: <Intel(R) I350 (Copper)> mem 0xf7460000-0xf747ffff,0xf748c000-0xf748ffff irq 18 at device 0.0 on pci15 [...] igb20: EEPROM V1.63-0 eTrack 0x800009fb [...] igb20: Using 1024 TX descriptors and 1024 RX descriptors [...] igb20: Using 4 RX queues 4 TX queues [...] igb20: Using MSI-X interrupts with 5 vectors [...] igb20: Ethernet address: ... [...] igb20: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb21: <Intel(R) I350 (Copper)> mem 0xf7440000-0xf745ffff,0xf7488000-0xf748bfff irq 19 at device 0.1 on pci15 [...] igb21: EEPROM V1.63-0 eTrack 0x800009fb [...] igb21: Using 1024 TX descriptors and 1024 RX descriptors [...] igb21: Using 4 RX queues 4 TX queues [...] igb21: Using MSI-X interrupts with 5 vectors [...] igb21: Ethernet address: ... [...] igb21: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb22: <Intel(R) I350 (Copper)> mem 0xf7420000-0xf743ffff,0xf7484000-0xf7487fff irq 16 at device 0.2 on pci15 [...] igb22: EEPROM V1.63-0 eTrack 0x800009fb [...] igb22: Using 1024 TX descriptors and 1024 RX descriptors [...] igb22: Using 4 RX queues 4 TX queues [...] igb22: Using MSI-X interrupts with 5 vectors [...] igb22: Ethernet address: ... [...] igb22: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb23: <Intel(R) I350 (Copper)> mem 0xf7400000-0xf741ffff,0xf7480000-0xf7483fff irq 17 at device 0.3 on pci15 [...] igb23: EEPROM V1.63-0 eTrack 0x800009fb [...] igb23: Using 1024 TX descriptors and 1024 RX descriptors [...] igb23: Using 4 RX queues 4 TX queues [...] igb23: Using MSI-X interrupts with 5 vectors [...] igb23: Ethernet address: ... [...] igb23: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib16: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci16: <ACPI PCI bus> on pcib16 [...] igb24: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xf7d00000-0xf7d1ffff,0xf7d20000-0xf7d23fff irq 16 at device 0.0 on pci16 [...] igb24: NVM V0.6 imgtype2 [...] igb24: Using 1024 TX descriptors and 1024 RX descriptors [...] igb24: Using 2 RX queues 2 TX queues [...] igb24: Using MSI-X interrupts with 3 vectors [...] igb24: Ethernet address: ... [...] igb24: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib17: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7e13000-0xf7e133ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7e12000-0xf7e127ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1596303620 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ada0 at ahcich2 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2BW240A4 DC32> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 02', SATA Slot: scbus0 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 21 ports with 21 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] uhub3: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 [...] uhub4: 6 ports with 6 removable, self powered