[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 1024x768 [...] [1] CPU: Intel(R) Core(TM) i5-4460S CPU @ 2.90GHz (2893.37-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x21<LAHF,ABM> [...] [1] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] [1] XSAVE Features=0x1<XSAVEOPT> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 8589934592 (8192 MB) [...] [1] avail memory = 8146104320 (7768 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ASUS A M I> [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-23 [...] [1] Launching APs: 3 2 1 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] [1] smbios0: Entry point: v2.1 (32-bit), Version: 2.7, BCD Revision: 2.7 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] [1] acpi0: <ASUS> [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] [1] Event timer "HPET" frequency 14318180 Hz quality 550 [...] [1] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] hdac0: <Intel Haswell HDA Controller> mem 0xf7e34000-0xf7e37fff irq 16 at device 3.0 on pci0 [...] [1] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff irq 21 at device 20.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] xhci0: Port routing mask set to 0xffffffff [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] em0: <Intel(R) I217-V LPT> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e3d000-0xf7e3dfff irq 20 at device 25.0 on pci0 [...] [1] em0: EEPROM V0.13-4 [...] [1] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] em0: Using an MSI interrupt [...] [1] em0: Ethernet address: ... [...] [1] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] [1] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7e3c000-0xf7e3c3ff irq 16 at device 26.0 on pci0 [...] [1] usbus1: EHCI version 1.0 [...] [1] usbus1 on ehci0 [...] [1] usbus1: 480Mbps High Speed USB v2.0 [...] [1] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7e30000-0xf7e33fff irq 22 at device 27.0 on pci0 [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] em1: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7dc0000-0xf7ddffff,0xf7d00000-0xf7d7ffff,0xf7de0000-0xf7de3fff irq 16 at device 0.0 on pci2 [...] [1] em1: EEPROM V1.8-0 [...] [1] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] em1: Using 2 RX queues 2 TX queues [...] [1] em1: Using MSI-X interrupts with 3 vectors [...] [1] em1: Ethernet address: ... [...] [1] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] pci3: <network> at device 0.0 (no driver attached) [...] [1] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7e3b000-0xf7e3b3ff irq 23 at device 29.0 on pci0 [...] [1] usbus2: EHCI version 1.0 [...] [1] usbus2 on ehci1 [...] [1] usbus2: 480Mbps High Speed USB v2.0 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e3a000-0xf7e3a7ff irq 19 at device 31.2 on pci0 [...] [1] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] [1] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] [1] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] [1] acpi_button0: <Power Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] acpi_tz1: <Thermal Zone> on acpi0 [...] [1] orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 [...] [1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] [1] kbd0 at atkbd0 [...] [1] atkbd0: [GIANT-LOCKED] [...] [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC-low" frequency 1446649925 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] [1] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] uhub0 on usbus2 [...] [1] uhub1 on usbus1 [...] [1] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] [1] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] [2] uhub2 on usbus0 [...] [2] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] [2] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] [2] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] [2] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] [2] pcm0: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] [2] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] [2] pcm2: <Realtek ALC887 (Rear Digital)> at nid 17 on hdaa1 [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD800JD-08MSA1 10.01E01> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 76324MB (156312576 512 byte sectors) [...] [2] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] [2] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] [2] ses0: cd0,pass1 in 'Slot 05', SATA Slot: scbus2 target 0 [...] [2] cd0 at ahcich5 bus 0 scbus2 target 0 lun 0 [...] cd0: <ASUS SH-224DB 1.10> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] [3] uhub0: 2 ports with 2 removable, self powered [...] [3] uhub1: 2 ports with 2 removable, self powered [...] [3] uhub2: 17 ports with 17 removable, self powered [...] [3] Root mount waiting for: usbus0 usbus1 usbus2 [...] [3] ugen0.2: <vendor 0x04cc product 0x1520> at usbus0 [...] [3] uhub3 on uhub2 [...] [3] uhub3: <vendor 0x04cc product 0x1520, class 9/0, rev 2.00/2.00, addr 1> on usbus0 [...] [3] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] [3] uhub4 on uhub1 [...] [3] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] [3] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] [3] uhub5 on uhub0 [...] [3] uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] [3] uhub4: 4 ports with 4 removable, self powered [...] [4] uhub5: 6 ports with 6 removable, self powered [...] [4] uhub3: 3 ports with 2 removable, self powered [...] [4] ugen0.3: <No brand UKA A4> at usbus0 [...] [4] ukbd0 on uhub3 [...] [4] ukbd0: <No brand UKA A4, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] [4] kbd2 at ukbd0 [...] [5] Root mount waiting for: usbus0 [...] [5] ugen0.4: <Generic USB2.0-CRW> at usbus0 [...] [5] umass0 on uhub2 [...] [5] umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/58.88, addr 3> on usbus0 [...] [5] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] [5] umass0:4:0: Attached to scbus4 [...] [5] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] [5] ugen0.5: <Realtek Bluetooth Radio> at usbus0 [...] [46] em0: link state changed to UP [...] [46] em1: link state changed to UP [...] [47] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] [47] acpi_wmi0: cannot find EC device [...] [47] acpi_wmi0: Embedded MOF found [...] [47] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] [47] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7e39000-0xf7e390ff irq 18 at device 31.3 on pci0 [...] [47] smbus0: <System Management Bus> on ichsmb0 [...] [48] ums0 on uhub3 [...] [48] ums0: <No brand UKA A4, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] [48] ums0: error reading report description [...] [48] device_attach: ums0 attach returned 12 [...] [48] ums0 on uhub3 [...] [48] ums0: <No brand UKA A4, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] [48] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] [49] lo0: link state changed to UP [...] [49] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] [54] pflog0: permanently promiscuous mode enabled [...] [54] em1: link state changed to DOWN [...] [57] em1: link state changed to UP [...] [90] wg0: link state changed to UP [...] [92] em0: link state changed to DOWN [...] [94] em0: link state changed to UP [...] [265] 781.669218 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] [265] 781.669242 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] [265] 781.669254 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] [265] em0: permanently promiscuous mode enabled [...] [265] 781.719444 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] [267] em0: link state changed to DOWN [...] [268] 784.219361 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] [268] 784.219382 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] [268] 784.219394 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] [270] 786.748156 [ 853] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] [270] 786.748177 [ 853] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] [270] 786.748188 [ 853] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] [270] em1: permanently promiscuous mode enabled [...] [270] 786.749637 [ 853] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] [271] em1: link state changed to DOWN [...] [271] 787.354707 [ 853] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] [271] 787.354729 [ 853] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] [271] 787.354741 [ 853] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] [273] em0: link state changed to UP [...] [273] em0: permanently promiscuous mode disabled [...] [274] em1: link state changed to UP [...] [275] em1: permanently promiscuous mode disabled [...] [93039] em0: link state changed to DOWN [...] [93039] em1: link state changed to DOWN [...] [93042] em1: link state changed to UP [...] [93044] em0: link state changed to UP [...] [93048] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [93048] Waiting (max 60 seconds) for system process `syncer' to stop... [...] [93048] Syncing disks, vnodes remaining... 0 0 0 0 done [...] [93052] All buffers synced. [...] [93052] Uptime: 1d1h50m52s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 1024x768 [...] [1] CPU microcode: updated from 0x12 to 0x28 [...] [1] CPU: Intel(R) Core(TM) i5-4460S CPU @ 2.90GHz (2893.39-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x21<LAHF,ABM> [...] [1] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] [1] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] [1] XSAVE Features=0x1<XSAVEOPT> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 8589934592 (8192 MB) [...] [1] avail memory = 8131461120 (7754 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ASUS A M I> [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-23 [...] [1] Launching APs: 3 1 2 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] [1] smbios0: Entry point: v2.1 (32-bit), Version: 2.7, BCD Revision: 2.7 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] [1] acpi0: <ASUS> [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] [1] Event timer "HPET" frequency 14318180 Hz quality 550 [...] [1] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] hdac0: <Intel Haswell HDA Controller> mem 0xf7e34000-0xf7e37fff irq 16 at device 3.0 on pci0 [...] [1] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff irq 21 at device 20.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] xhci0: Port routing mask set to 0xffffffff [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] em0: <Intel(R) I217-V LPT> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e3d000-0xf7e3dfff irq 20 at device 25.0 on pci0 [...] [1] em0: EEPROM V0.13-4 [...] [1] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] em0: Using an MSI interrupt [...] [1] em0: Ethernet address: ... [...] [1] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] [1] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7e3c000-0xf7e3c3ff irq 16 at device 26.0 on pci0 [...] [1] usbus1: EHCI version 1.0 [...] [1] usbus1 on ehci0 [...] [1] usbus1: 480Mbps High Speed USB v2.0 [...] [1] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7e30000-0xf7e33fff irq 22 at device 27.0 on pci0 [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] em1: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7dc0000-0xf7ddffff,0xf7d00000-0xf7d7ffff,0xf7de0000-0xf7de3fff irq 16 at device 0.0 on pci2 [...] [1] em1: EEPROM V1.8-0 [...] [1] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] em1: Using 2 RX queues 2 TX queues [...] [1] em1: Using MSI-X interrupts with 3 vectors [...] [1] em1: Ethernet address: ... [...] [1] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] pci3: <network> at device 0.0 (no driver attached) [...] [1] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7e3b000-0xf7e3b3ff irq 23 at device 29.0 on pci0 [...] [1] usbus2: EHCI version 1.0 [...] [1] usbus2 on ehci1 [...] [1] usbus2: 480Mbps High Speed USB v2.0 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e3a000-0xf7e3a7ff irq 19 at device 31.2 on pci0 [...] [1] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] [1] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] [1] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] [1] acpi_button0: <Power Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] acpi_tz1: <Thermal Zone> on acpi0 [...] [1] orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 [...] [1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] [1] kbd0 at atkbd0 [...] [1] atkbd0: [GIANT-LOCKED] [...] [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC-low" frequency 1446651316 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] [1] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] uhub0 on usbus1 [...] [1] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] [1] uhub1 on usbus2 [...] [1] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] [2] uhub2 on usbus0 [...] [2] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] [2] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] [2] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] [2] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] [2] pcm0: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] [2] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] [2] pcm2: <Realtek ALC887 (Rear Digital)> at nid 17 on hdaa1 [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD800JD-08MSA1 10.01E01> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 76324MB (156312576 512 byte sectors) [...] [2] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] [2] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] [2] ses0: cd0,pass1 in 'Slot 05', SATA Slot: scbus2 target 0 [...] [2] cd0 at ahcich5 bus 0 scbus2 target 0 lun 0 [...] cd0: <ASUS SH-224DB 1.10> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] [3] uhub1: 2 ports with 2 removable, self powered [...] [3] uhub0: 2 ports with 2 removable, self powered [...] [3] uhub2: 17 ports with 17 removable, self powered [...] [3] Root mount waiting for: usbus0 usbus1 usbus2 [...] [3] ugen0.2: <vendor 0x04cc product 0x1520> at usbus0 [...] [3] uhub3 on uhub2 [...] [3] uhub3: <vendor 0x04cc product 0x1520, class 9/0, rev 2.00/2.00, addr 1> on usbus0 [...] [3] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] [3] uhub4 on uhub0 [...] [3] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] [3] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] [3] uhub5 on uhub1 [...] [3] uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] [3] uhub4: 4 ports with 4 removable, self powered [...] [3] uhub5: 6 ports with 6 removable, self powered [...] [4] uhub3: 3 ports with 2 removable, self powered [...] [4] ugen0.3: <No brand UKA A4> at usbus0 [...] [4] ukbd0 on uhub3 [...] [4] ukbd0: <No brand UKA A4, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] [4] kbd2 at ukbd0 [...] [5] Root mount waiting for: usbus0 [...] [5] ugen0.4: <Generic USB2.0-CRW> at usbus0 [...] [5] umass0 on uhub2 [...] [5] umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/58.88, addr 3> on usbus0 [...] [5] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] [5] umass0:4:0: Attached to scbus4 [...] [5] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] [5] ugen0.5: <Realtek Bluetooth Radio> at usbus0