[...] re0: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p7 stable/23.7-n254871-d5ec322cffc SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6a<IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8054247424 (7681 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1710000-0xa1713fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1714000-0xa1715fff,0xa171e000-0xa171e0ff,0xa171d000-0xa171d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xa1400000-0xa14fffff,0xa158c000-0xa158ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xa1300000-0xa13fffff,0xa1588000-0xa158bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xa1200000-0xa12fffff,0xa1584000-0xa1587fff at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xa1100000-0xa11fffff,0xa1580000-0xa1583fff at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1604000-0xa1604fff,0xa1600000-0xa1603fff at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1700000-0xa170ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1718000-0xa1718fff,0xa1717000-0xa1717fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497601552 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmc0: No compatible cards found on bus [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SD9SN8W-128G-1006 X6103006> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 2> on usbus0 [...] Root mount waiting for:uhub2: MTT enabled [...] usbus0 [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.4: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.5: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] Dual Console: Serial Primary, Video Secondary [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] re0: link state changed to UP [...] ig4iic0: <Intel Gemini Lake I2C Controller-4> mem 0xa171c000-0xa171cfff,0xa171b000-0xa171bfff irq 31 at device 23.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Gemini Lake I2C Controller-7> mem 0xa171a000-0xa171afff,0xa1719000-0xa1719fff irq 34 at device 23.3 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1716000-0xa17160ff at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] vlan0: changing name to 'vlan01' [...] vlan1: changing name to 'vlan02' [...] vlan2: changing name to 'vlan03' [...] vlan3: changing name to 'vlan04' [...] igb0: link state changed to DOWN [...] vlan4: changing name to 'vlan05' [...] vlan5: changing name to 'vlan09' [...] igb3: link state changed to DOWN [...] [fib_algo] inet.0 (bsearch4#18) rebuild_fd_flm: switching algo to radix4_lockless [...] wg0: changing name to 'wg2' [...] wg2: link state changed to UP [...] wg1: changing name to 'wg3' [...] wg3: link state changed to UP [...] wg4: changing name to 'wg1' [...] wg1: link state changed to UP [...] re0: link state changed to DOWN [...] igb0: link state changed to UP [...] vlan05: link state changed to UP [...] igb1: link state changed to UP [...] vlan09: link state changed to UP [...] vlan03: link state changed to UP [...] vlan02: link state changed to UP [...] vlan04: link state changed to UP [...] vlan01: link state changed to UP [...] igb3: link state changed to UP [...] re0: link state changed to UP [...] wg1: link state changed to DOWN [...] wg4: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg2: link state changed to DOWN [...] wg0: changing name to 'wg2' [...] wg2: link state changed to UP [...] wg3: link state changed to DOWN [...] wg3: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] wg1: link state changed to DOWN [...] wg2: link state changed to DOWN [...] wg3: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg2: link state changed to UP [...] wg3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan01 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan01 [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] wg3: link state changed to DOWN [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg2: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg2: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg2: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg2: link state changed to UP [...] wg2: link state changed to DOWN [...] wg2: link state changed to UP [...] wg1: link state changed to DOWN [...] wg2: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg2: link state changed to UP [...] wg1: link state changed to DOWN [...] wg2: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg2: link state changed to UP [...] wg1: link state changed to DOWN [...] wg2: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg2: link state changed to UP [...] wg2: link state changed to DOWN [...] wg2: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan09 [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg2: link state changed to DOWN [...] wg2: link state changed to UP [...] wg2: link state changed to DOWN [...] wg2: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg2: link state changed to DOWN [...] wg2: link state changed to UP [...] wg2: link state changed to DOWN [...] wg2: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 27d4h22m11s [...] uhub1: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6a<IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8054231040 (7681 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1710000-0xa1713fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1714000-0xa1715fff,0xa171e000-0xa171e0ff,0xa171d000-0xa171d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xa1400000-0xa14fffff,0xa158c000-0xa158ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xa1300000-0xa13fffff,0xa1588000-0xa158bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xa1200000-0xa12fffff,0xa1584000-0xa1587fff at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xa1100000-0xa11fffff,0xa1580000-0xa1583fff at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1604000-0xa1604fff,0xa1600000-0xa1603fff at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1700000-0xa170ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1718000-0xa1718fff,0xa1717000-0xa1717fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497601497 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmc0: No compatible cards found on bus [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SD9SN8W-128G-1006 X6103006> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 2> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.4: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.5: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] Dual Console: Serial Primary, Video Secondary [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 1m7s [...] uhub1: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6a<IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8054231040 (7681 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1710000-0xa1713fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1714000-0xa1715fff,0xa171e000-0xa171e0ff,0xa171d000-0xa171d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xa1400000-0xa14fffff,0xa158c000-0xa158ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xa1300000-0xa13fffff,0xa1588000-0xa158bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xa1200000-0xa12fffff,0xa1584000-0xa1587fff at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xa1100000-0xa11fffff,0xa1580000-0xa1583fff at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1604000-0xa1604fff,0xa1600000-0xa1603fff at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1700000-0xa170ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1718000-0xa1718fff,0xa1717000-0xa1717fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497601231 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmc0: No compatible cards found on bus [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SD9SN8W-128G-1006 X6103006> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 2> on usbus0 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.4: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.5: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] Dual Console: Serial Primary, Video Secondary [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] re0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 2m40s [...] uhub1: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6a<IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8054231040 (7681 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1710000-0xa1713fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1714000-0xa1715fff,0xa171e000-0xa171e0ff,0xa171d000-0xa171d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xa1400000-0xa14fffff,0xa158c000-0xa158ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xa1300000-0xa13fffff,0xa1588000-0xa158bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xa1200000-0xa12fffff,0xa1584000-0xa1587fff at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xa1100000-0xa11fffff,0xa1580000-0xa1583fff at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 Option ROM V0-b324-p97 eTrack 0x80000aa6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1604000-0xa1604fff,0xa1600000-0xa1603fff at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1700000-0xa170ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1718000-0xa1718fff,0xa1717000-0xa1717fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497601295 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmc0: No compatible cards found on bus [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SD9SN8W-128G-1006 X6103006> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 2> on usbus0 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.4: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.5: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] Dual Console: Serial Primary, Video Secondary