[...] mfi0: Failed to get command [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 238 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE stable/22.7-n250212-a26d6065f1f SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz (2200.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 206152138752 (196602 MB) [...] avail memory = 200638275584 (191343 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 40 CPUs [...] FreeBSD/SMP: 2 package(s) x 10 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 1 4 5 12 23 11 26 35 29 30 2 28 19 6 9 34 14 16 38 7 20 39 24 21 32 15 37 33 31 8 17 18 13 22 36 3 25 10 27 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfe300-0xfe31e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pcib1: <ACPI Host-PCI bridge> on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Invader> port 0x2000-0x20ff mem 0x96200000-0x9620ffff,0x96100000-0x961fffff irq 26 at device 0.0 numa-domain 0 on pci3 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 928, limiting to 128 [...] mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 [...] mfi0: 9862 (714309778s/0x0020/info) - Shutdown command received from host [...] mfi0: 9863 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f49/1028) [...] mfi0: 9864 (boot + 10s/0x0020/info) - Firmware version 4.300.00-8366 [...] mfi0: 9865 (boot + 11s/0x0008/info) - Battery Present [...] mfi0: 9866 (boot + 11s/0x0020/info) - Package version XXX.XXX.XXX.XXX [...] mfi0: 9867 (boot + 11s/0x0020/info) - Board Revision A07 [...] mfi0: 9868 (boot + 15s/0x0008/info) - Battery temperature is normal [...] mfi0: 9869 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 9870 (boot + 24s/0x0002/info) - Unexpected sense: PD 01(e0xff/s1) Path 5000c500478f7969, CDB: 1a 08 08 00 ff 00, Sense: 2/04/00 [...] mfi0: 9871 (boot + 24s/0x0002/info) - Unexpected sense: PD 01(e0xff/s1) Path 5000c500478f7969, CDB: 1b 01 00 00 01 00, Sense: 2/04/00 [...] mfi0: 9872 (boot + 24s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored [...] pcib4: <ACPI PCI-PCI bridge>mfi0: 9873 (boot + 24s/0x0002/info) - Inserted: Encl PD 20 [...] irq 47mfi0: 9874 (boot + 24s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b343496 at device 2.0 numa-domain 0 on pci2 [...] pci4: <ACPI PCI bus>0fd,0000000000000000 [...] mfi0: 9875 (boot + 24s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] numa-domain 0mfi0: 9876 (boot + 24s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50023da23 on pcib4 [...] e1,0000000000000000 [...] mfi0: 9877 (boot + 24s/0x0002/info) - Inserted: PD 01(e0x20/s1) [...] mfi0: 9878 (boot + 24s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c500478f7969,0000000000000000 [...] mfi0: 9879 (boot + 24s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive [...] mfi0: 9880 (boot + 24s/0x0002/FATAL) - Unable to access device PD 01(e0x20/s1) [...] mfi0: 9881 (boot + 24s/0x0002/info) - State change on PD 01(e0x20/s1) from UNCONFIGURED_GOOD(0) to UNCONFIGURED_BAD(1) [...] mfi0: 9882 (boot + 24s/0x0002/info) - Inserted: PD 02(e0x20/s2) [...] pcib5: <ACPI PCI-PCI bridge>mfi0: 9883 (boot + 24s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50047c15d irq 47 at device 3.0 numa-domain 0 on pci2 [...] pci5: <ACPI PCI bus>e1,0000000000000000 [...] mfi0: 9884 (boot + 24s/0x0002/info) - Inserted: PD 03(e0x20/s3) [...] numa-domain 0 on pcib5 [...] mfi0: 9885 (boot + 24s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c500324cd8cd,0000000000000000 [...] mfi0: 9886 (boot + 24s/0x0002/info) - Inserted: PD 04(e0x20/s4) [...] mfi0: 9887 (boot + 24s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000c0f03007032,0000000000000000 [...] mfi0: 9888 (boot + 24s/0x0002/info) - Inserted: PD 05(e0x20/s5) [...] bxe0: <QLogic NetXtreme II BCM57800 10GbE (B0) BXE v:1.78.91>mfi0: 9889 (boot + 24s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50047c190 mem 0x95000000-0x957fffff,0x95800000-0x95ffffff,0x96030000-0x9603ffff irq 40 at device 0.0 numa-domain 0 on pci5 [...] bxe0: PCI BAR0 [10] memory allocated: 0x95000000-0x957fffff (8388608) -> 0xfffff80095000000 [...] bxe0: PCI BAR2 [18] memory allocated: 0x95800000-0x95ffffff (8388608) -> 0xfffff80095800000 [...] 41,0000000000000000 [...] mfi0: 9890 (boot + 27s/0x0042/info) - Dedicated Hot Spare created on PD 05(e0x20/s5) (ded,rev,ea,ac=1) [...] bxe0: PCI BAR4 [20] memory allocated: 0x96030000-0x9603ffff (65536) -> 0xfffff80096030000 [...] mfi0: 9891 (boot + 27s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 5000c500478f7969, CDB: 1a 08 08 00 ff 00, Sense: 2/04/00 [...] mfi0: 9892 (boot + 27s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 5000c500478f7969, CDB: 1b 01 00 00 01 00, Sense: 2/04/00 [...] mfi0: 9893 (boot + 27s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] bxe0: Found 10GBase-T media. [...] mfi0: 9894 (714309811s/0x0020/info) - Time established as 08/20/22 11:23:31; (27 seconds since power on) [...] mfi0: 9895 (714309899s/0x0020/info) - Host driver is loaded and operational [...] bxe0: IFMEDIA flags : 20 [...] bxe0: Using defaults for TSO: 65518/35/2048 [...] bxe0: Ethernet address: ... [...] bxe0: MSI-X vectors Requested 5 and Allocated 5 [...] bxe1: <QLogic NetXtreme II BCM57800 10GbE (B0) BXE v:1.78.91> mem 0x94000000-0x947fffff,0x94800000-0x94ffffff,0x96020000-0x9602ffff irq 44 at device 0.1 numa-domain 0 on pci5 [...] bxe1: PCI BAR0 [10] memory allocated: 0x94000000-0x947fffff (8388608) -> 0xfffff80094000000 [...] bxe1: PCI BAR2 [18] memory allocated: 0x94800000-0x94ffffff (8388608) -> 0xfffff80094800000 [...] bxe1: PCI BAR4 [20] memory allocated: 0x96020000-0x9602ffff (65536) -> 0xfffff80096020000 [...] bxe1: Found 10GBase-T media. [...] bxe1: IFMEDIA flags : 20 [...] bxe1: Using defaults for TSO: 65518/35/2048 [...] bxe1: Ethernet address: ... [...] bxe1: MSI-X vectors Requested 5 and Allocated 5 [...] bxe2: <QLogic NetXtreme II BCM57800 10GbE (B0) BXE v:1.78.91> mem 0x93000000-0x937fffff,0x93800000-0x93ffffff,0x96010000-0x9601ffff irq 44 at device 0.2 numa-domain 0 on pci5 [...] bxe2: PCI BAR0 [10] memory allocated: 0x93000000-0x937fffff (8388608) -> 0xfffff80093000000 [...] bxe2: PCI BAR2 [18] memory allocated: 0x93800000-0x93ffffff (8388608) -> 0xfffff80093800000 [...] bxe2: PCI BAR4 [20] memory allocated: 0x96010000-0x9601ffff (65536) -> 0xfffff80096010000 [...] bxe2: Found 1000Base-T media. [...] bxe2: IFMEDIA flags : 20 [...] bxe2: Using defaults for TSO: 65518/35/2048 [...] bxe2: Ethernet address: ... [...] bxe2: MSI-X vectors Requested 5 and Allocated 5 [...] bxe3: <QLogic NetXtreme II BCM57800 10GbE (B0) BXE v:1.78.91> mem 0x92000000-0x927fffff,0x92800000-0x92ffffff,0x96000000-0x9600ffff irq 45 at device 0.3 numa-domain 0 on pci5 [...] bxe3: PCI BAR0 [10] memory allocated: 0x92000000-0x927fffff (8388608) -> 0xfffff80092000000 [...] bxe3: PCI BAR2 [18] memory allocated: 0x92800000-0x92ffffff (8388608) -> 0xfffff80092800000 [...] bxe3: PCI BAR4 [20] memory allocated: 0x96000000-0x9600ffff (65536) -> 0xfffff80096000000 [...] bxe3: Found 1000Base-T media. [...] bxe3: IFMEDIA flags : 20 [...] bxe3: Using defaults for TSO: 65518/35/2048 [...] bxe3: Ethernet address: ... [...] bxe3: MSI-X vectors Requested 5 and Allocated 5 [...] pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci2 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pci2: <unknown> at device 17.0 (no driver attached) [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0x3078-0x307f,0x308c-0x308f,0x3070-0x3077,0x3088-0x308b,0x3040-0x305f mem 0x96301000-0x963017ff irq 16 at device 17.4 numa-domain 0 on pci2 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pci2: <simple comms> at device 22.0 (no driver attached) [...] pci2: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x96303000-0x963033ff irq 18 at device 26.0 numa-domain 0 on pci2 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib7: <PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2 [...] pci7: <PCI bus> numa-domain 0 on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci2 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 [...] pci9: <PCI bus> numa-domain 0 on pcib9 [...] pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9 [...] pci10: <PCI bus> numa-domain 0 on pcib10 [...] pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10 [...] pci11: <PCI bus> numa-domain 0 on pcib11 [...] vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 19 at device 0.0 numa-domain 0 on pci11 [...] vgapci0: Boot video device [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x96302000-0x963023ff irq 18 at device 29.0 numa-domain 0 on pci2 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci1: <Intel Wellsburg AHCI SATA controller> port 0x3068-0x306f,0x3084-0x3087,0x3060-0x3067,0x3080-0x3083,0x3020-0x303f mem 0x96300000-0x963007ff irq 16 at device 31.2 numa-domain 0 on pci2 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahcich7: <AHCI channel> at channel 3 on ahci1 [...] ahcich8: <AHCI channel> at channel 4 on ahci1 [...] ahcich9: <AHCI channel> at channel 5 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] pcib12: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci12: <ACPI PCI bus> numa-domain 1 on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> irq 71 at device 1.0 numa-domain 1 on pci12 [...] pci13: <ACPI PCI bus> numa-domain 1 on pcib13 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x8020-0x803f mem 0x3ffffe80000-0x3ffffefffff,0x3fffff04000-0x3fffff07fff irq 50 at device 0.0 numa-domain 1 on pci13 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 10 RX queues 10 TX queues [...] ix0: Using MSI-X interrupts with 11 vectors [...] ix0: allocated for 10 queues [...] ix0: allocated for 10 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x000161c1 PHY FW V65535 [...] ix0: netmap queues/slots: TX 10/2048, RX 10/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x8000-0x801f mem 0x3ffffe00000-0x3ffffe7ffff,0x3fffff00000-0x3fffff03fff irq 52 at device 0.1 numa-domain 1 on pci13 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 10 RX queues 10 TX queues [...] ix1: Using MSI-X interrupts with 11 vectors [...] ix1: allocated for 10 queues [...] ix1: allocated for 10 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x000161c1 PHY FW V65535 [...] ix1: netmap queues/slots: TX 10/2048, RX 10/2048 [...] pcib14: <ACPI PCI-PCI bridge> irq 71 at device 3.0 numa-domain 1 on pci12 [...] pci14: <ACPI PCI bus> numa-domain 1 on pcib14 [...] ix2: <Intel(R) X540-AT2> mem 0xc8200000-0xc83fffff,0xc8404000-0xc8407fff irq 68 at device 0.0 numa-domain 1 on pci14 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 10 RX queues 10 TX queues [...] ix2: Using MSI-X interrupts with 11 vectors [...] ix2: allocated for 10 queues [...] ix2: allocated for 10 rx queues [...] ix2: Ethernet address: ... [...] ix2: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix2: eTrack 0x80000389 PHY FW V272 [...] ix2: netmap queues/slots: TX 10/2048, RX 10/2048 [...] ix3: <Intel(R) X540-AT2> mem 0xc8000000-0xc81fffff,0xc8400000-0xc8403fff irq 64 at device 0.1 numa-domain 1 on pci14 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 10 RX queues 10 TX queues [...] ix3: Using MSI-X interrupts with 11 vectors [...] ix3: allocated for 10 queues [...] ix3: allocated for 10 rx queues [...] ix3: Ethernet address: ... [...] ix3: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix3: eTrack 0x80000389 PHY FW V272 [...] ix3: netmap queues/slots: TX 10/2048, RX 10/2048 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8800-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xed800-0xf17ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est15 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est16 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est17 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est18 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est19 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est20 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est21 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est22 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est23 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est24 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est25 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est26 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est27 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est28 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est29 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est30 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est31 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est32 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est33 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est34 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est35 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est36 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est37 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est38 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est39 attach returned 6 [...] Timecounter "TSC-low" frequency 1099999151 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 numa-domain 0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 numa-domain 0 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] mfid0 numa-domain 0 on mfi0 [...] mfid0: 1143552MB (2341994496 sectors) RAID volume 'OS' is optimal [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x800a> at usbus0 [...] uhub2 numa-domain 0 on uhub1 [...] uhub2: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8002> at usbus1 [...] uhub3 numa-domain 0 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub4 numa-domain 0 on uhub2 [...] uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0 [...] uhub4: 6 ports with 6 removable, self powered [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ix2: link state changed to UP [...] lagg0: link state changed to UP [...] ix3: link state changed to UP [...] ix2: link state changed to DOWN [...] ix3: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] lagg1: link state changed to DOWN [...] ix2: promiscuous mode enabled [...] ix3: promiscuous mode enabled [...] lagg0: promiscuous mode enabled [...] carp: demoted by 240 to 240 (interface down) [...] ix1: link state changed to UP [...] ix0: link state changed to UP [...] bxe2: ERROR: Changing VLAN_HWTAGGING is not supported! [...] bxe2: ERROR: Changing VLAN_HWFILTER is not supported! [...] bxe2: ERROR: Changing VLAN_HWCSUM is not supported! [...] ix3: link state changed to UP [...] bxe2: link state changed to DOWN [...] lagg1: link state changed to UP [...] bxe2: NIC Link is Up, 1000 Mbps full duplex, Flow control: none [...] bxe2: link state changed to UP [...] ix2: link state changed to UP [...] ix0: promiscuous mode enabled [...] ix1: promiscuous mode enabled [...] lagg1: promiscuous mode enabled [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] ipsec0: changing name to 'ipsec3' [...] ipsec1: changing name to 'ipsec5' [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by -240 to 0 (interface up) [...] lagg0: link state changed to UP [...] ipsec2: changing name to 'ipsec1' [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] ix2: link state changed to DOWN [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] ix2: link state changed to UP [...] mfi0: Failed to get command [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [...] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 4 3 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p1 stable/22.7-n250224-b668033f066 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz (2200.10-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 206152138752 (196602 MB) [...] avail memory = 200638275584 (191343 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 40 CPUs [...] FreeBSD/SMP: 2 package(s) x 10 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 1 7 23 29 26 30 21 36 33 18 15 28 16 34 39 14 38 35 32 24 27 12 37 8 13 17 10 20 2 4 11 25 6 3 9 22 19 31 5 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfe300-0xfe31e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pcib1: <ACPI Host-PCI bridge> on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Invader> port 0x2000-0x20ff mem 0x96200000-0x9620ffff,0x96100000-0x961fffff irq 26 at device 0.0 numa-domain 0 on pci3 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 928, limiting to 128 [...] mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 [...] mfi0: 9896 (714310472s/0x0020/info) - Shutdown command received from host [...] mfi0: 9897 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f49/1028) [...] mfi0: 9898 (boot + 10s/0x0020/info) - Firmware version 4.300.00-8366 [...] mfi0: 9899 (boot + 11s/0x0008/info) - Battery Present [...] mfi0: 9900 (boot + 11s/0x0020/info) - Package version XXX.XXX.XXX.XXX [...] mfi0: 9901 (boot + 11s/0x0020/info) - Board Revision A07 [...] mfi0: 9902 (boot + 15s/0x0008/info) - Battery temperature is normal [...] mfi0: 9903 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 9904 (boot + 24s/0x0002/info) - Unexpected sense: PD 01(e0xff/s1) Path 5000c500478f7969, CDB: 1a 08 08 00 ff 00, Sense: 2/04/00 [...] mfi0: 9905 (boot + 24s/0x0002/info) - Unexpected sense: PD 01(e0xff/s1) Path 5000c500478f7969, CDB: 1b 01 00 00 01 00, Sense: 2/04/00 [...] mfi0: 9906 (boot + 24s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored [...] mfi0: 9907 (boot + 24s/0x0002/info) - Inserted: Encl PD 20 [...] pcib4: <ACPI PCI-PCI bridge> irq 47 at device 2.0mfi0: 9908 (boot + 24s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b343496 numa-domain 0 on pci2 [...] pci4: <ACPI PCI bus>0fd,0000000000000000 [...] mfi0: 9909 (boot + 24s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] numa-domain 0 on pcib4 [...] mfi0: 9910 (boot + 24s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50023da23e1,0000000000000000 [...] mfi0: 9911 (boot + 24s/0x0002/info) - Inserted: PD 01(e0x20/s1) [...] mfi0: 9912 (boot + 24s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c500478f7969,0000000000000000 [...] mfi0: 9913 (boot + 24s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive [...] mfi0: 9914 (boot + 24s/0x0002/FATAL) - Unable to access device PD 01(e0x20/s1) [...] mfi0: 9915 (boot + 24s/0x0002/info) - State change on PD 01(e0x20/s1) from UNCONFIGURED_GOOD(0) to UNCONFIGURED_BAD(1) [...] mfi0: 9916 (boot + 24s/0x0002/info) - Inserted: PD 02(e0x20/s2) [...] pcib5: <ACPI PCI-PCI bridge>mfi0: 9917 (boot + 24s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50047c15d irq 47 at device 3.0 numa-domain 0 on pci2 [...] pci5: <ACPI PCI bus>e1,0000000000000000 [...] mfi0: 9918 (boot + 24s/0x0002/info) - Inserted: PD 03(e0x20/s3) [...] numa-domain 0 on pcib5 [...] mfi0: 9919 (boot + 24s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c500324cd8cd,0000000000000000 [...] mfi0: 9920 (boot + 24s/0x0002/info) - Inserted: PD 04(e0x20/s4) [...] mfi0: 9921 (boot + 24s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000c0f03007032,0000000000000000 [...] mfi0: 9922 (boot + 24s/0x0002/info) - Inserted: PD 05(e0x20/s5) [...] bxe0: <QLogic NetXtreme II BCM57800 10GbE (B0) BXE v:1.78.91>mfi0: 9923 (boot + 24s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50047c190 mem 0x95000000-0x957fffff,0x95800000-0x95ffffff,0x96030000-0x9603ffff irq 40 at device 0.0 numa-domain 0 on pci5 [...] bxe0: PCI BAR0 [10] memory allocated: 0x95000000-0x957fffff (8388608) -> 0xfffff80095000000 [...] bxe0: PCI BAR2 [18] memory allocated: 0x95800000-0x95ffffff (8388608) -> 0xfffff80095800000 [...] 41,0000000000000000 [...] mfi0: 9924 (boot + 27s/0x0042/info) - Dedicated Hot Spare created on PD 05(e0x20/s5) (ded,rev,ea,ac=1) [...] bxe0: PCI BAR4 [20] memory allocated: 0x96030000-0x9603ffff (65536) -> 0xfffff80096030000 [...] mfi0: 9925 (boot + 27s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 5000c500478f7969, CDB: 1a 08 08 00 ff 00, Sense: 2/04/00 [...] mfi0: 9926 (boot + 27s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 5000c500478f7969, CDB: 1b 01 00 00 01 00, Sense: 2/04/00 [...] bxe0: Found 10GBase-T media. [...] mfi0: 9927 (boot + 27s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] mfi0: 9928 (714310506s/0x0020/info) - Time established as 08/20/22 11:35:06; (28 seconds since power on) [...] mfi0: 9929 (714310593s/0x0020/info) - Host driver is loaded and operational [...] bxe0: IFMEDIA flags : 20 [...] bxe0: Using defaults for TSO: 65518/35/2048 [...] bxe0: Ethernet address: ... [...] bxe0: MSI-X vectors Requested 5 and Allocated 5 [...] bxe1: <QLogic NetXtreme II BCM57800 10GbE (B0) BXE v:1.78.91> mem 0x94000000-0x947fffff,0x94800000-0x94ffffff,0x96020000-0x9602ffff irq 44 at device 0.1 numa-domain 0 on pci5 [...] bxe1: PCI BAR0 [10] memory allocated: 0x94000000-0x947fffff (8388608) -> 0xfffff80094000000 [...] bxe1: PCI BAR2 [18] memory allocated: 0x94800000-0x94ffffff (8388608) -> 0xfffff80094800000 [...] bxe1: PCI BAR4 [20] memory allocated: 0x96020000-0x9602ffff (65536) -> 0xfffff80096020000 [...] bxe1: Found 10GBase-T media. [...] bxe1: IFMEDIA flags : 20 [...] bxe1: Using defaults for TSO: 65518/35/2048 [...] bxe1: Ethernet address: ... [...] bxe1: MSI-X vectors Requested 5 and Allocated 5 [...] bxe2: <QLogic NetXtreme II BCM57800 10GbE (B0) BXE v:1.78.91> mem 0x93000000-0x937fffff,0x93800000-0x93ffffff,0x96010000-0x9601ffff irq 44 at device 0.2 numa-domain 0 on pci5 [...] bxe2: PCI BAR0 [10] memory allocated: 0x93000000-0x937fffff (8388608) -> 0xfffff80093000000 [...] bxe2: PCI BAR2 [18] memory allocated: 0x93800000-0x93ffffff (8388608) -> 0xfffff80093800000 [...] bxe2: PCI BAR4 [20] memory allocated: 0x96010000-0x9601ffff (65536) -> 0xfffff80096010000 [...] bxe2: Found 1000Base-T media. [...] bxe2: IFMEDIA flags : 20 [...] bxe2: Using defaults for TSO: 65518/35/2048 [...] bxe2: Ethernet address: ... [...] bxe2: MSI-X vectors Requested 5 and Allocated 5 [...] bxe3: <QLogic NetXtreme II BCM57800 10GbE (B0) BXE v:1.78.91> mem 0x92000000-0x927fffff,0x92800000-0x92ffffff,0x96000000-0x9600ffff irq 45 at device 0.3 numa-domain 0 on pci5 [...] bxe3: PCI BAR0 [10] memory allocated: 0x92000000-0x927fffff (8388608) -> 0xfffff80092000000 [...] bxe3: PCI BAR2 [18] memory allocated: 0x92800000-0x92ffffff (8388608) -> 0xfffff80092800000 [...] bxe3: PCI BAR4 [20] memory allocated: 0x96000000-0x9600ffff (65536) -> 0xfffff80096000000 [...] bxe3: Found 1000Base-T media. [...] bxe3: IFMEDIA flags : 20 [...] bxe3: Using defaults for TSO: 65518/35/2048 [...] bxe3: Ethernet address: ... [...] bxe3: MSI-X vectors Requested 5 and Allocated 5 [...] pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci2 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pci2: <unknown> at device 17.0 (no driver attached) [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0x3078-0x307f,0x308c-0x308f,0x3070-0x3077,0x3088-0x308b,0x3040-0x305f mem 0x96301000-0x963017ff irq 16 at device 17.4 numa-domain 0 on pci2 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pci2: <simple comms> at device 22.0 (no driver attached) [...] pci2: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x96303000-0x963033ff irq 18 at device 26.0 numa-domain 0 on pci2 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib7: <PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2 [...] pci7: <PCI bus> numa-domain 0 on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci2 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 [...] pci9: <PCI bus> numa-domain 0 on pcib9 [...] pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9 [...] pci10: <PCI bus> numa-domain 0 on pcib10 [...] pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10 [...] pci11: <PCI bus> numa-domain 0 on pcib11 [...] vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 19 at device 0.0 numa-domain 0 on pci11 [...] vgapci0: Boot video device [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x96302000-0x963023ff irq 18 at device 29.0 numa-domain 0 on pci2 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci1: <Intel Wellsburg AHCI SATA controller> port 0x3068-0x306f,0x3084-0x3087,0x3060-0x3067,0x3080-0x3083,0x3020-0x303f mem 0x96300000-0x963007ff irq 16 at device 31.2 numa-domain 0 on pci2 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahcich7: <AHCI channel> at channel 3 on ahci1 [...] ahcich8: <AHCI channel> at channel 4 on ahci1 [...] ahcich9: <AHCI channel> at channel 5 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] pcib12: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci12: <ACPI PCI bus> numa-domain 1 on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> irq 71 at device 1.0 numa-domain 1 on pci12 [...] pci13: <ACPI PCI bus> numa-domain 1 on pcib13 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x8020-0x803f mem 0x3ffffe80000-0x3ffffefffff,0x3fffff04000-0x3fffff07fff irq 50 at device 0.0 numa-domain 1 on pci13 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 10 RX queues 10 TX queues [...] ix0: Using MSI-X interrupts with 11 vectors [...] ix0: allocated for 10 queues [...] ix0: allocated for 10 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x000161c1 PHY FW V65535 [...] ix0: netmap queues/slots: TX 10/2048, RX 10/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x8000-0x801f mem 0x3ffffe00000-0x3ffffe7ffff,0x3fffff00000-0x3fffff03fff irq 52 at device 0.1 numa-domain 1 on pci13 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 10 RX queues 10 TX queues [...] ix1: Using MSI-X interrupts with 11 vectors [...] ix1: allocated for 10 queues [...] ix1: allocated for 10 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x000161c1 PHY FW V65535 [...] ix1: netmap queues/slots: TX 10/2048, RX 10/2048 [...] pcib14: <ACPI PCI-PCI bridge> irq 71 at device 3.0 numa-domain 1 on pci12 [...] pci14: <ACPI PCI bus> numa-domain 1 on pcib14 [...] ix2: <Intel(R) X540-AT2> mem 0xc8200000-0xc83fffff,0xc8404000-0xc8407fff irq 68 at device 0.0 numa-domain 1 on pci14 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 10 RX queues 10 TX queues [...] ix2: Using MSI-X interrupts with 11 vectors [...] ix2: allocated for 10 queues [...] ix2: allocated for 10 rx queues [...] ix2: Ethernet address: ... [...] ix2: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix2: eTrack 0x80000389 PHY FW V272 [...] ix2: netmap queues/slots: TX 10/2048, RX 10/2048 [...] ix3: <Intel(R) X540-AT2> mem 0xc8000000-0xc81fffff,0xc8400000-0xc8403fff irq 64 at device 0.1 numa-domain 1 on pci14 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 10 RX queues 10 TX queues [...] ix3: Using MSI-X interrupts with 11 vectors [...] ix3: allocated for 10 queues [...] ix3: allocated for 10 rx queues [...] ix3: Ethernet address: ... [...] ix3: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix3: eTrack 0x80000389 PHY FW V272 [...] ix3: netmap queues/slots: TX 10/2048, RX 10/2048 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8800-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xed800-0xf17ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est15 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est16 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est17 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est18 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est19 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est20 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est21 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est22 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est23 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est24 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est25 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est26 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est27 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est28 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est29 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est30 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est31 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est32 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est33 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est34 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est35 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est36 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est37 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est38 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1be200001800 [...] device_attach: est39 attach returned 6 [...] Timecounter "TSC-low" frequency 1099998962 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] mfid0 numa-domain 0 on mfi0 [...] mfid0: 1143552MB (2341994496 sectors) RAID volume 'OS' is optimal [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 numa-domain 0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1 numa-domain 0 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x800a> at usbus0 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8002> at usbus1 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub4 numa-domain 0 on uhub2 [...] uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0 [...] uhub4: 6 ports with 6 removable, self powered