[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/22.7-n250270-9d1c26e8548 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1280x1024 [...] CPU: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (3400.18-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 25769803776 (24576 MB) [...] avail memory = 24405594112 (23274 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xbdf7f598-0xbdf7f5b6 [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f14000-0xf7f17fff at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f1c000-0xf7f1c3ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f10000-0xf7f13fff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7ec0000-0xf7edffff,0xf7e00000-0xf7e7ffff,0xf7ee0000-0xf7ee3fff at device 0.0 on pci1 [...] em0: EEPROM V1.8-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7d00000-0xf7d00fff,0xf0000000-0xf0003fff at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xf7cc0000-0xf7cdffff,0xf7c00000-0xf7c7ffff,0xf7ce0000-0xf7ce3fff at device 0.0 on pci5 [...] em1: EEPROM V1.8-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f1b000-0xf7f1b3ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f1a000-0xf7f1a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1699999449 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich3 bus 0 scbus0 target 0 lun 0 [...] ada0: <PNY CS900 250GB SSD CS900613> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 03', SATA Slot: scbus0 target 0 [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2uhub0: 2 ports with 2 removable, self powered [...] [...] uhub2: 21 ports with 21 removable, self powered [...] ugen0.2: <CPS CP1000PFCLCD> at usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] re0: link state changed to DOWN [...] em1: link state changed to UP [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7f19000-0xf7f190ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] lo0: link state changed to UP [...] padlock0: No ACE support. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em0: link state changed to UP [...] pid 64807 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] em1: link state changed to UP [...] pid 8977 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 62724 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/22.7-n250270-9d1c26e8548 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1280x1024 [...] CPU: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (3400.14-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 25769803776 (24576 MB) [...] avail memory = 24405594112 (23274 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xbdf7f598-0xbdf7f5b6 [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f14000-0xf7f17fff at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f1c000-0xf7f1c3ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f10000-0xf7f13fff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7ec0000-0xf7edffff,0xf7e00000-0xf7e7ffff,0xf7ee0000-0xf7ee3fff at device 0.0 on pci1 [...] em0: EEPROM V1.8-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7d00000-0xf7d00fff,0xf0000000-0xf0003fff at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xf7cc0000-0xf7cdffff,0xf7c00000-0xf7c7ffff,0xf7ce0000-0xf7ce3fff at device 0.0 on pci5 [...] em1: EEPROM V1.8-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f1b000-0xf7f1b3ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f1a000-0xf7f1a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1699998783 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich3 bus 0 scbus0 target 0 lun 0 [...] ada0: <PNY CS900 250GB SSD CS900613> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 03', SATA Slot: scbus0 target 0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 21 ports with 21 removable, self powered [...] ugen0.2: <CPS CP1000PFCLCD> at usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] re0: link state changed to DOWN [...] em1: link state changed to UP [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7f19000-0xf7f190ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] lo0: link state changed to UP [...] padlock0: No ACE support. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] pid 89483 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] re0: promiscuous mode enabled [...] pid 27149 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 87468 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 19095 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] pid 86901 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] re0: promiscuous mode disabled [...] 610.004760 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 610.275075 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 1493 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 94246 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] 981.084645 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 981.084666 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 981.084676 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 981.086254 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em1: link state changed to DOWN [...] 981.674922 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 981.674944 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 981.674955 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em1: link state changed to UP [...] pid 79420 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 7656 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] em1: link state changed to DOWN [...] pid 38251 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] em1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 7 1 1 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/22.7-n250270-9d1c26e8548 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1280x1024 [...] CPU: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (3400.14-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 25769803776 (24576 MB) [...] avail memory = 24405594112 (23274 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xbdf7f598-0xbdf7f5b6 [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f14000-0xf7f17fff at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f1c000-0xf7f1c3ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f10000-0xf7f13fff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7ec0000-0xf7edffff,0xf7e00000-0xf7e7ffff,0xf7ee0000-0xf7ee3fff at device 0.0 on pci1 [...] em0: EEPROM V1.8-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7d00000-0xf7d00fff,0xf0000000-0xf0003fff at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xf7cc0000-0xf7cdffff,0xf7c00000-0xf7c7ffff,0xf7ce0000-0xf7ce3fff at device 0.0 on pci5 [...] em1: EEPROM V1.8-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f1b000-0xf7f1b3ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f1a000-0xf7f1a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1700000553 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich3 bus 0 scbus0 target 0 lun 0 [...] ada0: <PNY CS900 250GB SSD CS900613> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ses0: pass0,ada0 in 'Slot 03', SATA Slot: scbus0 target 0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 21 ports with 21 removable, self powered [...] ugen0.2: <CPS CP1000PFCLCD> at usbus0 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] re0: link state changed to DOWN [...] em1: link state changed to UP [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7f19000-0xf7f190ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] lo0: link state changed to UP [...] padlock0: No ACE support. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] pid 30789 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] pid 34502 (python3.9), jid 0, uid 0: exited on signal 11 (core dumped) [...] 369.319391 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 369.949773 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] 387.048908 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 387.048939 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 387.048957 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 387.051044 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em1: link state changed to DOWN [...] 388.702136 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 388.702174 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 388.702195 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em1: link state changed to UP [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to DOWN [...] pid 2244 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 67574 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 7940 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] em0: link state changed to UP [...] pid 49545 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] pid 99612 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 7 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/22.7-n250270-9d1c26e8548 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1280x1024 [...] CPU: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (3400.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 25769803776 (24576 MB) [...] avail memory = 24405594112 (23274 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xbdf7f598-0xbdf7f5b6 [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f14000-0xf7f17fff at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f1c000-0xf7f1c3ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f10000-0xf7f13fff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7ec0000-0xf7edffff,0xf7e00000-0xf7e7ffff,0xf7ee0000-0xf7ee3fff at device 0.0 on pci1 [...] em0: EEPROM V1.8-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7d00000-0xf7d00fff,0xf0000000-0xf0003fff at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xf7cc0000-0xf7cdffff,0xf7c00000-0xf7c7ffff,0xf7ce0000-0xf7ce3fff at device 0.0 on pci5 [...] em1: EEPROM V1.8-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f1b000-0xf7f1b3ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f1a000-0xf7f1a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1699998547 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ada0 at ahcich3 bus 0 scbus0 target 0 lun 0 [...] ada0: <PNY CS900 250GB SSD CS900613> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 03', SATA Slot: scbus0 target 0 [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 21 ports with 21 removable, self powered [...] ugen0.2: <CPS CP1000PFCLCD> at usbus0 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] re0: link state changed to DOWN [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7f19000-0xf7f190ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] lo0: link state changed to UP [...] padlock0: No ACE support. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] pid 72073 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] 227.709965 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 228.151458 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 71430 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] 247.225871 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 247.225911 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 247.226068 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 247.230860 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em1: link state changed to DOWN [...] 249.025300 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 249.025333 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 249.025353 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em1: link state changed to UP [...] pid 65973 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 4327 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] 964.591202 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 964.591310 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 53169 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 1663 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] 970.012116 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 970.012211 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 81977 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 20860 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] 038.433524 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 038.433584 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 64862 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 39581 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 33830 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 420 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 18439 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 22988 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 5908 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 98427 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 46675 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 72849 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] 827.827503 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 827.827583 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 72569 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] 841.780918 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 841.780980 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 48497 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] 803.748676 [1174] netmap_extra_free breaking with head 639703808 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 86784 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] 809.875822 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 809.875881 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 7168 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 35688 (python3.9), jid 0, uid 0: exited on signal 6 (core dumped) [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 9 1 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/22.7-n250270-9d1c26e8548 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1280x1024 [...] CPU: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (3400.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 25769803776 (24576 MB) [...] avail memory = 24405594112 (23274 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xbdf7f598-0xbdf7f5b6 [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f14000-0xf7f17fff at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f1c000-0xf7f1c3ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f10000-0xf7f13fff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7ec0000-0xf7edffff,0xf7e00000-0xf7e7ffff,0xf7ee0000-0xf7ee3fff at device 0.0 on pci1 [...] em0: EEPROM V1.8-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7d00000-0xf7d00fff,0xf0000000-0xf0003fff at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xf7cc0000-0xf7cdffff,0xf7c00000-0xf7c7ffff,0xf7ce0000-0xf7ce3fff at device 0.0 on pci5 [...] em1: EEPROM V1.8-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f1b000-0xf7f1b3ff at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f1a000-0xf7f1a7ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1700000592 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich3 bus 0 scbus0 target 0 lun 0 [...] ada0: <PNY CS900 250GB SSD CS900613> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 03', SATA Slot: scbus0 target 0 [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 21 ports with 21 removable, self powered [...] ugen0.2: <CPS CP1000PFCLCD> at usbus0 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered