[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p7 #0: Mon Jan 31 18:24:03 UTC 2022 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(vga): resolution 640x480 [...] module_register: cannot register pci/ciss from kernel; already loaded from ciss.ko [...] Module pci/ciss failed to register: 17 [...] CPU: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz (2394.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 51539607552 (49152 MB) [...] avail memory = 50063392768 (47744 MB) [...] CPU microcode: updated from 0x710 to 0x71a [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HP ProLiant> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20201113/tbfadt-850) [...] Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20201113/tbfadt-850) [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 1 2 [...] Timecounter "TSC-low" frequency 1197024772 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] 000.000019 [4354] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] vtvga0: <VT VGA driver> [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HP ProLiant> [...] acpi0: Power Button (fixed) [...] acpi0: _OSC failed: AE_BUFFER_OVERFLOW [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci0 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] ciss0: <HP Smart Array P420i> port 0x5000-0x50ff mem 0xfbf00000-0xfbffffff,0xfbef0000-0xfbef03ff irq 34 at device 0.0 numa-domain 0 on pci5 [...] ciss0: PERFORMANT Transport [...] pcib6: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci0 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci0 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci0 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci0 [...] pci10: <ACPI PCI bus> numa-domain 0 on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 17.0 numa-domain 0 on pci0 [...] pci11: <ACPI PCI bus> numa-domain 0 on pcib11 [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfac60000-0xfac603ff irq 21 at device 26.0 numa-domain 0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib12: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 [...] pci12: <ACPI PCI bus> numa-domain 0 on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci0 [...] pci13: <ACPI PCI bus> numa-domain 0 on pcib13 [...] pci0:2:0:0: failed to read VPD data. [...] bge0: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xfabf0000-0xfabfffff,0xfabe0000-0xfabeffff,0xfabd0000-0xfabdffff irq 16 at device 0.0 numa-domain 0 on pci13 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus0: <MII bus> numa-domain 0 on bge0 [...] brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] pci0:2:0:1: failed to read VPD data. [...] bge1: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xfabc0000-0xfabcffff,0xfabb0000-0xfabbffff,0xfaba0000-0xfabaffff irq 17 at device 0.1 numa-domain 0 on pci13 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus1: <MII bus> numa-domain 0 on bge1 [...] brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pci0:2:0:2: failed to read VPD data. [...] bge2: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xfab90000-0xfab9ffff,0xfab80000-0xfab8ffff,0xfab70000-0xfab7ffff irq 16 at device 0.2 numa-domain 0 on pci13 [...] bge2: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus2: <MII bus> numa-domain 0 on bge2 [...] brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2 [...] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge2: Using defaults for TSO: 65518/35/2048 [...] bge2: Ethernet address: ... [...] pci0:2:0:3: failed to read VPD data. [...] bge3: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xfab60000-0xfab6ffff,0xfab50000-0xfab5ffff,0xfab40000-0xfab4ffff irq 17 at device 0.3 numa-domain 0 on pci13 [...] bge3: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus3: <MII bus> numa-domain 0 on bge3 [...] brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3 [...] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge3: Using defaults for TSO: 65518/35/2048 [...] bge3: Ethernet address: ... [...] pcib14: <ACPI PCI-PCI bridge> at device 28.7 numa-domain 0 on pci0 [...] pci14: <ACPI PCI bus> numa-domain 0 on pcib14 [...] vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbde0000-0xfbde3fff,0xfb000000-0xfb7fffff irq 16 at device 0.1 numa-domain 0 on pci14 [...] vgapci0: Boot video device [...] uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 16 at device 0.4 numa-domain 0 on pci14 [...] usbus1 numa-domain 0 on uhci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfac50000-0xfac503ff irq 20 at device 29.0 numa-domain 0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 numa-domain 0 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib15: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 [...] pci15: <PCI bus> numa-domain 0 on pcib15 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] atapci0: <Intel Patsburg SATA600 controller> port 0x4000-0x4007,0x4008-0x400b,0x4010-0x4017,0x4018-0x401b,0x4020-0x402f,0x4030-0x403f irq 17 at device 31.2 numa-domain 0 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] atapci1: <Intel Patsburg SATA300 controller> port 0x4040-0x4047,0x4048-0x404b,0x4050-0x4057,0x4058-0x405b,0x4060-0x406f,0x4070-0x407f irq 17 at device 31.5 numa-domain 0 on pci0 [...] ata4: <ATA channel> at channel 0 on atapci1 [...] ata5: <ATA channel> at channel 1 on atapci1 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0 [...] ipmi0: KCS mode found at io 0xca2 on acpi [...] acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 [...] uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0 [...] uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounters tick every 1.000 msec [...] ipmi0: IPMI device rev. 2, firmware rev. 2.61, version 2.0, device support mask 0x8f [...] ipmi0: Number of channels 1 [...] ipmi0: Attached watchdog [...] ipmi0: Establishing power cycle handler [...] ugen1.1: <HP UHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 numa-domain 0 on usbus1 [...] uhub1 numa-domain 0 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2Trying to mount root from ufs:/dev/da0s1a [rw]... [...] numa-domain 0 on usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub0: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] Root mount waiting for: CAM usbus0 usbus1 usbus2 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: CAM usbus0 usbus2 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 numa-domain 0 on uhub2 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 numa-domain 0 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: CAM usbus0 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] Root mount waiting for: CAM usbus0 usbus2 [...] ugen2.3: <vendor 0x0424 product 0x2660> at usbus2 [...] uhub5 numa-domain 0 on uhub4 [...] uhub5: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 3> on usbus2 [...] da0 at ciss0 bus 0 scbus0 target 0 lun 0 [...] da0: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device [...] da0: Serial Number... [...] da0: 135.168MB/s transfers [...] da0: Command Queueing enabled [...] da0: 953837MB (1953459632 512 byte sectors) [...] da1 at ciss0 bus 0 scbus0 target 2 lun 0 [...] da1: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device [...] da1: Serial Number... [...] da1: 135.168MB/s transfers [...] da1: Command Queueing enabled [...] da1: 1907697MB (3906963632 512 byte sectors) [...] da2 at ciss0 bus 0 scbus0 target 3 lun 0 [...] da2: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device [...] da2: Serial Number... [...] da2: 135.168MB/s transfers [...] da2: Command Queueing enabled [...] da2: 1907697MB (3906963632 512 byte sectors) [...] da3 at ciss0 bus 0 scbus0 target 4 lun 0 [...] da3: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device [...] da3: Serial Number... [...] da3: 135.168MB/s transfers [...] da3: Command Queueing enabled [...] da3: 1907697MB (3906963632 512 byte sectors) [...] da4 at ciss0 bus 0 scbus0 target 5 lun 0 [...] da4: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device [...] da4: Serial Number... [...] da4: 135.168MB/s transfers [...] da4: Command Queueing enabled [...] da4: 1907697MB (3906963632 512 byte sectors) [...] cd0 at ata2 bus 0 scbus3 target 1 lun 0 [...] cd0: <hp DVDROM DH41N S100> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub5: 2 ports with 1 removable, self powered [...] ugen0.3: <asmedia ASMT1153e> at usbus0 [...] umass0 numa-domain 0 on uhub3 [...] umass0: <asmedia ASMT1153e, class 0/0, rev 2.10/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:7:0: Attached to scbus7 [...] da5 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da5: <WDC WD60 02FRYZ-01WD5B1 0> Fixed Direct Access SPC-4 SCSI device [...] da5: Serial Number... [...] da5: 40.000MB/s transfers [...] da5: 5723166MB (11721045168 512 byte sectors) [...] da5: quirks=0x2<NO_6_BYTE> [...] ugen0.4: <vendor 0x0bda product 0x8187> at usbus0 [...] ugen0.5: <PixArt USB Optical Mouse> at usbus0 [...] ugen0.6: <Microsoft Comfort Curve Keyboard 3000> at usbus0 [...] ukbd0 numa-domain 0 on uhub3 [...] ukbd0: <Microsoft Comfort Curve Keyboard 3000, class 0/0, rev 2.00/1.70, addr 6> on usbus0 [...] kbd2 at ukbd0 [...] mountroot: waiting for device /dev/da0s1a... [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ioat0: <SNB IOAT Ch0> mem 0xfacf0000-0xfacf3fff irq 31 at device 4.0 numa-domain 0 on pci0 [...] ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat1: <SNB IOAT Ch1> mem 0xface0000-0xface3fff irq 39 at device 4.1 numa-domain 0 on pci0 [...] ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat2: <SNB IOAT Ch2> mem 0xfacd0000-0xfacd3fff irq 31 at device 4.2 numa-domain 0 on pci0 [...] ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat3: <SNB IOAT Ch3> mem 0xfacc0000-0xfacc3fff irq 39 at device 4.3 numa-domain 0 on pci0 [...] ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat4: <SNB IOAT Ch4> mem 0xfacb0000-0xfacb3fff irq 31 at device 4.4 numa-domain 0 on pci0 [...] ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat5: <SNB IOAT Ch5> mem 0xfaca0000-0xfaca3fff irq 39 at device 4.5 numa-domain 0 on pci0 [...] ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat6: <SNB IOAT Ch6> mem 0xfac90000-0xfac93fff irq 31 at device 4.6 numa-domain 0 on pci0 [...] ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat7: <SNB IOAT Ch7> mem 0xfac80000-0xfac83fff irq 39 at device 4.7 numa-domain 0 on pci0 [...] ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] lo0: link state changed to UP [...] urtw0 numa-domain 0 on uhub3 [...] urtw0: <Bulk-IN,Bulk-OUT,Bulk-OUT> on usbus0 [...] urtw0: unknown RTL8187L type: 0x8000000