[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU microcode: updated from 0xb000021 to 0xb000040 [...] CPU: Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz (2200.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 68719476736 (65536 MB) [...] avail memory = 66679795712 (63590 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <SUPERM SMCI--MB> [...] FreeBSD/SMP: Multiprocessor System Detected: 20 CPUs [...] FreeBSD/SMP: 1 package(s) x 10 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 13 3 14 11 15 12 6 7 9 5 19 18 2 8 10 4 16 17 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci1 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Invader> port 0xe000-0xe0ff mem 0xfb300000-0xfb30ffff,0xfb200000-0xfb2fffff irq 26 at device 0.0 numa-domain 0 on pci2 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 928, limiting to 128 [...] mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 [...] mfi0: 6395 (791836668s/0x0020/info) - Shutdown command received from host [...] mfi0: 6396 (boot + 5s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/0809/15d9) [...] mfi0: 6397 (boot + 5s/0x0020/info) - Firmware version 4.680.00-8290 [...] mfi0: 6398 (boot + 12s/0x0020/info) - Package version 24.21.0-0028 [...] mfi0: 6399 (boot + 12s/0x0020/info) - Board Revision [...] mfi0: 6400 (boot + 5s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/0809/15d9) [...] mfi0: 6401 (boot + 5s/0x0020/info) - Firmware version 4.680.00-8290 [...] mfi0: 6402 (boot + 12s/0x0020/info) - Package version 24.21.0-0028 [...] mfi0: 6403 (boot + 12s/0x0020/info) - Board Revision [...] mfi0: 6404 (boot + 5s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/0809/15d9) [...] mfi0: 6405 (boot + 5s/0x0020/info) - Firmware version 4.680.00-8290 [...] pcib3: <ACPI PCI-PCI bridge>mfi0: 6406 (boot + 12s/0x0020/info) - Package version 24.21.0-0028 [...] mfi0: 6407 (boot + 12s/0x0020/info) - Board Revision [...] mfi0: 6408 (boot + 31s/0x0002/info) - Inserted: PD 00(e0xfc/s0) [...] mfi0: 6409 (boot + 31s/0x0002/info) - Inserted: PD 00(e0xfc/s0) Info: enclPd=fc, scsiType=0, portMap=00, sasAddr=4433221100000000,0000000000000000 [...] irq 40 at device 3.0 numa-domain 0 on pci1 [...] pci3: <ACPI PCI bus>mfi0: 6410 (boot + 31s/0x0002/info) - PD 00(e0xfc/s0) Inquiry info: Info- ATA ST1000DM003-1ER1 W4Y027SW 931 GB [...] mfi0: 6411 (boot + 31s/0x0002/info) - Inserted: PD 03(e0xfc/s3) [...] mfi0: 6412 (boot + 31s/0x0002/info) - Inserted: PD 03(e0xfc/s3) Info: enclPd=fc, scsiType=0, portMap=02, sasAddr=4433221103000000,0000000000000000 [...] mfi0: 6413 (boot + 31s/0x0002/info) - PD 03(e0xfc/s3) Inquiry info: Info- ATA ST1000DM010-2EP1 Z9ATRXS1 931 GB [...] numa-domain 0 on pcib3 [...] mfi0: 6414 (boot + 31s/0x0002/info) - Inserted: PD 05(e0xfc/s1) [...] mfi0: 6415 (boot + 31s/0x0002/info) - Inserted: PD 05(e0xfc/s1) Info: enclPd=fc, scsiType=0, portMap=01, sasAddr=4433221101000000,0000000000000000 [...] mfi0: 6416 (boot + 31s/0x0002/info) - PD 05(e0xfc/s1) Inquiry info: Info- ATA ST1000DM010-2EP1 Z9ATSFD4 931 GB [...] mfi0: 6417 (boot + 31s/0x0020/info) - Boot Device reset, setting target ID as invalid [...] mfi0: 6418 (boot + 31s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] mfi0: 6419 (791836841s/0x0020/info) - Time established as 02/02/25 18:40:41; (33 seconds since power on) [...] mfi0: 6420 (boot + 5s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/0809/15d9) [...] mfi0: 6421 (boot + 5s/0x0020/info) - Firmware version 4.680.00-8290 [...] mfi0: 6422 (boot + 11s/0x0020/info) - Package version 24.21.0-0028 [...] ix0: <Intel(R) X540-AT2>mfi0: 6423 (boot + 11s/0x0020/info) - Board Revision [...] mfi0: 6424 (boot + 31s/0x0002/info) - Inserted: PD 00(e0xfc/s0) [...] mfi0: 6425 (boot + 31s/0x0002/info) - Inserted: PD 00(e0xfc/s0) Info: enclPd=fc, scsiType=0, portMap=00, sasAddr=4433221100000000,0000000000000000 [...] mfi0: 6426 (boot + 31s/0x0002/info) - PD 00(e0xfc/s0) Inquiry info: Info- ATA ST1000DM003-1ER1 W4Y027SW 931 GB [...] mem 0xf9400000-0xf95fffff,0xf9604000-0xf9607fff irq 44 at device 0.0 numa-domain 0 on pci3 [...] mfi0: 6427 (boot + 31s/0x0002/info) - Inserted: PD 03(e0xfc/s3) [...] mfi0: 6428 (boot + 31s/0x0002/info) - Inserted: PD 03(e0xfc/s3) Info: enclPd=fc, scsiType=0, portMap=02, sasAddr=4433221103000000,0000000000000000 [...] mfi0: 6429 (boot + 31s/0x0002/info) - PD 03(e0xfc/s3) Inquiry info: Info- ATA ST1000DM010-2EP1 Z9ATRXS1 931 GB [...] mfi0: 6430 (boot + 31s/0x0002/info) - Inserted: PD 05(e0xfc/s1) [...] mfi0: 6431 (boot + 31s/0x0002/info) - Inserted: PD 05(e0xfc/s1) Info: enclPd=fc, scsiType=0, portMap=01, sasAddr=4433221101000000,0000000000000000 [...] mfi0: 6432 (boot + 31s/0x0002/info) - PD 05(e0xfc/s1) Inquiry info: Info- ATA ST1000DM010-2EP1 Z9ATSFD4 931 GB [...] mfi0: 6433 (boot + 31s/0x0020/info) - Boot Device reset, setting target ID as invalid [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] mfi0: 6434 (boot + 31s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] mfi0: 6435 (791836972s/0x0020/info) - Time established as 02/02/25 18:42:52; (33 seconds since power on) [...] mfi0: 6436 (boot + 5s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/0809/15d9) [...] ix0: Using 10 RX queues 10 TX queues [...] ix0: Using MSI-X interrupts with 11 vectors [...] mfi0: 6437 (boot + 5s/0x0020/info) - Firmware version 4.680.00-8290 [...] mfi0: 6438 (boot + 14s/0x0020/info) - Package version 24.21.0-0028 [...] mfi0: 6439 (boot + 14s/0x0020/info) - Board Revision [...] mfi0: 6440 (boot + 29s/0x0002/info) - Inserted: PD 00(e0xfc/s0) [...] mfi0: 6441 (boot + 29s/0x0002/info) - Inserted: PD 00(e0xfc/s0) Info: enclPd=fc, scsiType=0, portMap=00, sasAddr=44332211000000ix0: allocated for 10 queues [...] 00,0000000000000000 [...] mfi0: 6442 (boot + 29s/0x0002/info) - PD 00(e0xfc/s0) Inquiry info: Info- ATA ST1000DM003-1ER1 W4Y027SW 931 GB [...] mfi0: 6443 (boot + 29s/0x0002/info) - Inserted: PD 03(e0xfc/s3) [...] ix0: allocated for 10 rx queues [...] mfi0: 6444 (boot + 29s/0x0002/info) - Inserted: PD 03(e0xfc/s3) Info: enclPd=fc, scsiType=0, portMap=02, sasAddr=4433221103000000,0000000000000000 [...] mfi0: 6445 (boot + 29s/0x0002/info) - PD 03(e0xfc/s3) Inquiry info: Info- ATA ST1000DM010-2EP1 Z9ATRXS1 931 GB [...] mfi0: 6446 (boot + 29s/0x0002/info) - Inserted: PD 05(e0xfc/s1) [...] mfi0: 6447 (boot + 29s/0x0002/info) - Inserted: PD 05(e0xfc/s1) Info: enclPd=fc, scsiType=0, portMap=01, sasAddr=4433221101000000,0000000000000000 [...] mfi0: 6448 (boot + 29s/0x0002/info) - PD 05(e0xfc/s1) Inquiry info: Info- ATA ST1000DM010-2EP1 Z9ATSFD4 931 GB [...] mfi0: 6449 (boot + 29s/0x0020/info) - Boot Device reset, setting target ID as invalid [...] mfi0: 6450 (boot + 29s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] mfi0: 6451 (791837380s/0x0020/info) - Time established as 02/02/25 18:49:40; (31 seconds since power on) [...] mfi0: 6452 (boot + 5s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/0809/15d9) [...] mfi0: 6453 (boot + 5s/0x0020/info) - Firmware version 4.680.00-8290 [...] mfi0: 6454 (boot + 12s/0x0020/info) - Package version 24.21.0-0028 [...] mfi0: 6455 (boot + 12s/0x0020/info) - Board Revision [...] mfi0: 6456 (boot + 31s/0x0002/info) - Inserted: PD 00(e0xfc/s0) [...] mfi0: 6457 (boot + 31s/0x0002/info) - Inserted: PD 00(e0xfc/s0) Info: enclPd=fc, scsiType=0, portMap=00, sasAddr=4433221100000000,0000000000000000 [...] mfi0: 6458 (boot + 31s/0x0002/info) - PD 00(e0xfc/s0) Inquiry info: Info- ATA ST1000DM003-1ER1 W4Y027SW 931 GB [...] mfi0: 6459 (boot + 31s/0x0002/info) - Inserted: PD 03(e0xfc/s3) [...] mfi0: 6460 (boot + 31s/0x0002/info) - Inserted: PD 03(e0xfc/s3) Info: enclPd=fc, scsiType=0, portMap=02, sasAddr=4433221103000000,0000000000000000 [...] mfi0: 6461 (boot + 31s/0x0002/info) - PD 03(e0xfc/s3) Inquiry info: Info- ATA ST1000DM010-2EP1 Z9ATRXS1 931 GB [...] mfi0: 6462 (boot + 31s/0x0002/info) - Inserted: PD 05(e0xfc/s1) [...] mfi0: 6463 (boot + 31s/0x0002/info) - Inserted: PD 05(e0xfc/s1) Info: enclPd=fc, scsiType=0, portMap=01, sasAddr=4433221101000000,0000000000000000 [...] mfi0: 6464 (boot + 31s/0x0002/info) - PD 05(e0xfc/s1) Inquiry info: Info- ATA ST1000DM010-2EP1 Z9ATSFD4 931 GB [...] mfi0: 6465 (boot + 31s/0x0020/info) - Boot Device reset, setting target ID as invalid [...] mfi0: 6466 (boot + 31s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] mfi0: 6467 (791837512s/0x0020/info) - Time established as 02/02/25 18:51:52; (33 seconds since power on) [...] mfi0: 6468 (boot + 5s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/0809/15d9) [...] mfi0: 6469 (boot + 5s/0x0020/info) - Firmware version 4.680.00-8290 [...] mfi0: 6470 (boot + 14s/0x0020/info) - Package version 24.21.0-0028 [...] mfi0: 6471 (boot + 14s/0x0020/info) - Board Revision [...] mfi0: 6472 (boot + 29s/0x0002/info) - Inserted: PD 00(e0xfc/s0) [...] mfi0: 6473 (boot + 29s/0x0002/info) - Inserted: PD 00(e0xfc/s0) Info: enclPd=fc, scsiType=0, portMap=00, sasAddr=4433221100000000,0000000000000000 [...] mfi0: 6474 (boot + 29s/0x0002/info) - PD 00(e0xfc/s0) Inquiry info: Info- ATA ST1000DM003-1ER1 W4Y027SW 931 GB [...] mfi0: 6475 (boot + 29s/0x0002/info) - Inserted: PD 03(e0xfc/s3) [...] mfi0: 6476 (boot + 29s/0x0002/info) - Inserted: PD 03(e0xfc/s3) Info: enclPd=fc, scsiType=0, portMap=02, sasAddr=4433221103000000,0000000000000000 [...] mfi0: 6477 (boot + 29s/0x0002/info) - PD 03(e0xfc/s3) Inquiry info: Info- ATA ST1000DM010-2EP1 Z9ATRXS1 931 GB [...] mfi0: 6478 (boot + 29s/0x0002/info) - Inserted: PD 05(e0xfc/s1) [...] mfi0: 6479 (boot + 29s/0x0002/info) - Inserted: PD 05(e0xfc/s1) Info: enclPd=fc, scsiType=0, portMap=01, sasAddr=4433221101000000,0000000000000000 [...] mfi0: 6480 (boot + 29s/0x0002/info) - PD 05(e0xfc/s1) Inquiry info: Info- ATA ST1000DM010-2EP1 Z9ATSFD4 931 GB [...] mfi0: 6481 (boot + 29s/0x0020/info) - Boot Device reset, setting target ID as invalid [...] mfi0: 6482 (boot + 29s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] mfi0: 6483 (791837900s/0x0020/info) - Time established as 02/02/25 18:58:20; (31 seconds since power on) [...] mfi0: 6484 (791838000s/0x0020/WARN) - Host driver needs to be upgraded to enable extended LD support [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: fw 4.3.0 nvm 4.05.0 Option ROM V1-b1681-p0 eTrack 0x80000628 [...] ix0: netmap queues/slots: TX 10/2048, RX 10/2048 [...] ix1: <Intel(R) X540-AT2> mem 0xf9200000-0xf93fffff,0xf9600000-0xf9603fff irq 40 at device 0.1 numa-domain 0 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 10 RX queues 10 TX queues [...] ix1: Using MSI-X interrupts with 11 vectors [...] ix1: allocated for 10 queues [...] ix1: allocated for 10 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: fw 4.3.0 nvm 4.05.0 Option ROM V1-b1681-p0 eTrack 0x80000628 [...] ix1: netmap queues/slots: TX 10/2048, RX 10/2048 [...] pci1: <unknown> at device 17.0 (no driver attached) [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf020-0xf03f mem 0xfb938000-0xfb9387ff irq 16 at device 17.4 numa-domain 0 on pci1 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb900000-0xfb90ffff irq 19 at device 20.0 numa-domain 0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci1: <simple comms> at device 22.0 (no driver attached) [...] pci1: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb934000-0xfb9343ff irq 18 at device 26.0 numa-domain 0 on pci1 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci1 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci4 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 16 at device 0.0 numa-domain 0 on pci5 [...] vgapci0: Boot video device [...] pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.2 numa-domain 0 on pci1 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] igb0: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xfb700000-0xfb77ffff,0xfb780000-0xfb783fff irq 18 at device 0.0 numa-domain 0 on pci6 [...] igb0: EEPROM V3.16-0 eTrack 0x800004d7 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.3 numa-domain 0 on pci1 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] igb1: <Intel(R) I210 (Copper)> port 0xb000-0xb01f mem 0xfb600000-0xfb67ffff,0xfb680000-0xfb683fff irq 19 at device 0.0 numa-domain 0 on pci7 [...] igb1: EEPROM V3.16-0 eTrack 0x800004d9 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci1 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] ixl0: <Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T - 2.3.3-k> mem 0xf8000000-0xf8ffffff,0xf9018000-0xf901ffff irq 16 at device 0.0 numa-domain 0 on pci8 [...] ixl0: fw 6.0.48442 api 1.7 nvm 6.01 etid 80003485 oem 1.262.0 [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 10 RX queues 10 TX queues [...] ixl0: Using MSI-X interrupts with 11 vectors [...] taskqgroup_attach_cpu: qid not found for iov cpu=16 [...] ixl0: taskqgroup_attach_cpu failed 22 [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 16 queues for PF LAN VSI; 10 queues active [...] ixl0: PCI Express Bus: Speed 5.0GT/s Width x4 [...] ixl0: PCI-Express bandwidth available for this device may be insufficient for optimal performance. [...] ixl0: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate. [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 10/1024, RX 10/1024 [...] ixl1: <Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T - 2.3.3-k> mem 0xf7000000-0xf7ffffff,0xf9010000-0xf9017fff irq 16 at device 0.1 numa-domain 0 on pci8 [...] ixl1: fw 6.0.48442 api 1.7 nvm 6.01 etid 80003485 oem 1.262.0 [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 10 RX queues 10 TX queues [...] ixl1: Using MSI-X interrupts with 11 vectors [...] taskqgroup_attach_cpu: qid not found for iov cpu=16 [...] ixl1: taskqgroup_attach_cpu failed 22 [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 16 queues for PF LAN VSI; 10 queues active [...] ixl1: PCI Express Bus: Speed 5.0GT/s Width x4 [...] ixl1: PCI-Express bandwidth available for this device may be insufficient for optimal performance. [...] ixl1: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate. [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 10/1024, RX 10/1024 [...] ixl2: <Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T - 2.3.3-k> mem 0xf6000000-0xf6ffffff,0xf9008000-0xf900ffff irq 16 at device 0.2 numa-domain 0 on pci8 [...] ixl2: fw 6.0.48442 api 1.7 nvm 6.01 etid 80003485 oem 1.262.0 [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 10 RX queues 10 TX queues [...] ixl2: Using MSI-X interrupts with 11 vectors [...] taskqgroup_attach_cpu: qid not found for iov cpu=16 [...] ixl2: taskqgroup_attach_cpu failed 22 [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 16 queues for PF LAN VSI; 10 queues active [...] ixl2: PCI Express Bus: Speed 5.0GT/s Width x4 [...] ixl2: PCI-Express bandwidth available for this device may be insufficient for optimal performance. [...] ixl2: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate. [...] ixl2: SR-IOV ready [...] ixl2: netmap queues/slots: TX 10/1024, RX 10/1024 [...] ixl3: <Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T - 2.3.3-k> mem 0xf5000000-0xf5ffffff,0xf9000000-0xf9007fff irq 16 at device 0.3 numa-domain 0 on pci8 [...] ixl3: fw 6.0.48442 api 1.7 nvm 6.01 etid 80003485 oem 1.262.0 [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 10 RX queues 10 TX queues [...] ixl3: Using MSI-X interrupts with 11 vectors [...] taskqgroup_attach_cpu: qid not found for iov cpu=16 [...] ixl3: taskqgroup_attach_cpu failed 22 [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 16 queues for PF LAN VSI; 10 queues active [...] ixl3: PCI Express Bus: Speed 5.0GT/s Width x4 [...] ixl3: PCI-Express bandwidth available for this device may be insufficient for optimal performance. [...] ixl3: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate. [...] ixl3: SR-IOV ready [...] ixl3: netmap queues/slots: TX 10/1024, RX 10/1024 [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb933000-0xfb9333ff irq 18 at device 29.0 numa-domain 0 on pci1 [...] usbus2: EHCI version 1.0 [...] usbus2 numa-domain 0 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci1: <Intel Patsburg+ (RAID) AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xfb932000-0xfb9327ff irq 16 at device 31.2 numa-domain 0 on pci1 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahcich7: <AHCI channel> at channel 3 on ahci1 [...] ahcich8: <AHCI channel> at channel 4 on ahci1 [...] ahcich9: <AHCI channel> at channel 5 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] acpi_button0: <Power Button> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounter "TSC-low" frequency 1099999182 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 numa-domain 0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 numa-domain 0 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 numa-domain 0 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ada0 at ahcich4 bus 0 scbus5 target 0 lun 0 [...] ada0: <WDC WDS240G2G0A-00JH30 UF300000> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228944MB (468877312 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada1 at ahcich5 bus 0 scbus6 target 0 lun 0 [...] ada1: <WDC WDS240G2G0A-00JH30 UF300000> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 228944MB (468877312 512 byte sectors) [...] ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] ses1: ada0,pass1 in 'Slot 00', SATA Slot: scbus5 target 0 [...] ses1: ada1,pass2 in 'Slot 01', SATA Slot: scbus6 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8002> at usbus2 [...] uhub4 numa-domain 0 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen0.2: <Raritan D2CIM-DVUSB> at usbus0 [...] ukbd0 numa-domain 0 on uhub2 [...] ukbd0: <Raritan D2CIM-DVUSB, class 0/0, rev 1.10/0.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ugen0.3: <vendor 0x0557 product 0x7000> at usbus0 [...] uhub5 numa-domain 0 on uhub2 [...] uhub5: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub5: 4 ports with 3 removable, self powered [...] ixl2: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: None [...] ixl2: link state changed to UP [...] Root mount waiting for:ugen0.4: <vendor 0x0557 product 0x2419> at usbus0 [...] usbus0 [...] ukbd1 numa-domain 0 on uhub5 [...] ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] ixl3: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: None [...] ixl3: link state changed to UP [...] Dual Console: Video Primary, Serial Secondary [...] mfi0: IOCTL 0x40086481 not handled [...] mfi0: IOCTL 0x40086481 not handled [...] mfi0: IOCTL 0x40086481 not handled [...] mfi0: IOCTL 0x40086481 not handled