[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD Ryzen 9 3900X 12-Core Processor (4000.09-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x10cb657<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 68719476736 (65536 MB) [...] avail memory = 66746286080 (63654 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 19 18 21 22 16 3 1 20 13 2 14 7 11 9 8 10 15 12 6 17 23 4 5 [...] Timecounter "TSC-low" frequency 2000046620 Hz quality 1000 [...] random: entropy device external interface [...] 000.000017 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] AMD-Vi: IVRS Info VAsize = 64 PAsize = 48 GVAsize = 2 flags:0 [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] amdsmn0: <AMD Family 17h System Management Network> on hostb0 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xfce00000-0xfce03fff irq 24 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] nvme1: <Generic NVMe Device> mem 0xfca00000-0xfca03fff irq 29 at device 0.0 on pci4 [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] ppt0 mem 0xfc900000-0xfc901fff irq 30 at device 0.0 on pci5 [...] pcib6: <ACPI PCI-PCI bridge> at device 4.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xfc810000-0xfc8101ff irq 28 at device 0.0 on pci6 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib7: <ACPI PCI-PCI bridge> at device 5.0 on pci3 [...] pci7: <ACPI PCI bus> on pcib7 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfc704000-0xfc704fff,0xfc700000-0xfc703fff irq 29 at device 0.0 on pci7 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci3 [...] pci8: <ACPI PCI bus> on pcib8 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xfc600000-0xfc600fff,0xe2100000-0xe2103fff irq 30 at device 0.0 on pci8 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x2c800000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib9: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci3 [...] pci9: <ACPI PCI bus> on pcib9 [...] pci9: <unknown> at device 0.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc300000-0xfc3fffff irq 28 at device 0.1 on pci9 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff irq 30 at device 0.3 on pci9 [...] xhci1: 64 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib10: <PCI-PCI bridge> irq 29 at device 9.0 on pci3 [...] pci10: <PCI bus> on pcib10 [...] ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfc500000-0xfc5007ff irq 29 at device 0.0 on pci10 [...] ahci1: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported with FBS [...] ahcich4: <AHCI channel> at channel 2 on ahci1 [...] ahcich5: <AHCI channel> at channel 3 on ahci1 [...] pcib11: <PCI-PCI bridge> irq 30 at device 10.0 on pci3 [...] pci11: <PCI bus> on pcib11 [...] ahci2: <AMD KERNCZ AHCI SATA controller> mem 0xfc400000-0xfc4007ff irq 30 at device 0.0 on pci11 [...] ahci2: AHCI v1.31 with 4 6Gbps ports, Port Multiplier supported with FBS [...] ahcich6: <AHCI channel> at channel 0 on ahci2 [...] ahcich7: <AHCI channel> at channel 1 on ahci2 [...] ahcich10: <AHCI channel> at channel 4 on ahci2 [...] ahcich11: <AHCI channel> at channel 5 on ahci2 [...] pcib12: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 54 at device 0.0 on pci12 [...] nvidia0: <Unknown> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fbb) HDA Controller> mem 0xfc080000-0xfc083fff irq 55 at device 0.1 on pci12 [...] pcib13: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <unknown> at device 0.0 (no driver attached) [...] pcib14: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci14: <ACPI PCI bus> on pcib14 [...] pci14: <unknown> at device 0.0 (no driver attached) [...] pci14: <encrypt/decrypt> at device 0.1 (no driver attached) [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfcb00000-0xfcbfffff irq 39 at device 0.3 on pci14 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] hdac1: <AMD X570 HDA Controller> mem 0xfcd00000-0xfcd07fff irq 36 at device 0.4 on pci14 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 [...] uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 [...] uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ivhd0: <AMD-Vi/IOMMU ivhd with EFR> on acpi0 [...] ivhd0: Flag:b0<IotlbSup,Coherent> [...] ivhd0: Features(type:0x11) MsiNumPPR = 0 PNBanks= 2 PNCounters= 0 [...] ivhd0: Extended features[31:0]:22294ade<PPRSup,<b2>,NXSup,GTSup,IASup> HATS = 0x2 GATS = 0x0 GLXSup = 0x1 SmiFSup = 0x1 SmiFRC = 0x2 GAMSup = 0x1 DualPortLogSup = 0x2 DualEventLogSup = 0x2 [...] ivhd0: Extended features[62:32]:58f77ef<USSup> Max PASID: 0x2f DevTblSegSup = 0x3 MarcSup = 0x1 [...] ivhd0: supported paging level:7, will use only: 4 [...] ivhd0: device range: 0x0 - 0xffff [...] ivhd0: PCI cap 0x190b640f@0x40 feature:19<IOTLB,EFR,CapExt> [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xd67ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] nvme0: Allocated 64MB host memory buffer [...] uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <SPCC M.2 PCIE SSD> NVMe namespace [...] nvd0: 244198MB (500118192 512 byte sectors) [...] nvd1: <Sabrent Rocket Q> NVMe namespace [...] nvd1: 953869MB (1953525168 512 byte sectors) [...] hdacc0: <NVIDIA (0x0071) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0071) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALCS1200A (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm5: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm6: <Realtek ALCS1200A (Internal Digital)> at nid 17 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: CAM usbus0 usbus1 usbus2 [...] ada0 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada0: <TOSHIBA MD04ACA400 FP2A> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 3815447MB (7814037168 512 byte sectors) [...] ada1 at ahcich5 bus 0 scbus3 target 0 lun 0 [...] ada1: <MD4000GSA6472E 01.01AX1> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 3815447MB (7814037168 512 byte sectors) [...] ada2 at ahcich7 bus 0 scbus5 target 0 lun 0 [...] ada2: <SAMSUNG HD103UJ 1AA01113> ATA-7 SATA 2.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 953869MB (1953525168 512 byte sectors) [...] ada3 at ahcich10 bus 0 scbus6 target 0 lun 0 [...] ada3: <HGST HDN726040ALE614 APGNW7JH> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 3815447MB (7814037168 512 byte sectors) [...] ada4 at ahcich11 bus 0 scbus7 target 0 lun 0 [...] ada4: <ST5000DM000-1FK178 CC44> ACS-2 ATA SATA 3.x device [...] ada4: Serial Number... [...] ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada4: Command Queueing enabled [...] ada4: 4769307MB (9767541168 512 byte sectors) [...] ada4: quirks=0x1<4K> [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <HL-DT-ST BD-RE BH16NS40 1.03> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub1: 8 ports with 8 removable, self powered [...] uhub2: 10 ports with 10 removable, self powered [...] uhub0: 10 ports with 10 removable, self powered [...] ugen0.2: <vendor 0x0557 product 0x8021> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 1> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.2: <Generic USB Storage> at usbus1 [...] umass0 on uhub2 [...] umass0: <Generic USB Storage, class 0/0, rev 2.00/94.51, addr 1> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:8:0: Attached to scbus8 [...] da0 at umass-sim0 bus 0 scbus8 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 9451> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] ugen0.3: <Razer DeathAdder> at usbus0 [...] ugen1.3: <AsusTek Computer Inc. AURA LED Controller> at usbus1 [...] ugen0.4: <KVM USB KVM SWITCH> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <Kb> on usbus0 [...] kbd2 at ukbd0 [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:11:49 UTC 2020 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re1: link state changed to DOWN [...] ums1 on uhub3 [...] ums1: <Razer DeathAdder, class 0/0, rev 2.00/1.00, addr 2> on usbus0 [...] uhid0 on uhub2 [...] uhid0: <AsusTek Computer Inc. AURA LED Controller, class 0/0, rev 2.00/1.00, addr 2> on usbus1 [...] ums1: 7 buttons and [XYZ] coordinates ID=0 [...] ums0 on uhub3 [...] ums0: <KVM USB KVM SWITCH, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] bridge0: Ethernet address: ... [...] bridge0: changing name to 'vm-deplorable' [...] re0: promiscuous mode enabled [...] vm-deplorable: link state changed to DOWN [...] tap0: Ethernet address: ... [...] tap0: promiscuous mode enabled [...] tap0: link state changed to UP [...] vm-deplorable: link state changed to UP [...] re0: link state changed to UP [...] tap1: Ethernet address: ... [...] tap1: promiscuous mode enabled [...] tap1: link state changed to UP [...] nd6_dad_timer: cancel DAD on tap1 because of ND6_IFF_IFDISABLED. [...] tap2: Ethernet address: ... [...] tap2: promiscuous mode enabled [...] tap2: link state changed to UP [...] nd6_dad_timer: cancel DAD on tap2 because of ND6_IFF_IFDISABLED. [...] tap3: Ethernet address: ... [...] tap3: promiscuous mode enabled [...] tap3: link state changed to UP [...] nd6_dad_timer: cancel DAD on tap3 because of ND6_IFF_IFDISABLED. [...] tap4: Ethernet address: ... [...] tap4: promiscuous mode enabled [...] tap4: link state changed to UP [...] nd6_dad_timer: cancel DAD on tap4 because of ND6_IFF_IFDISABLED. [...] tap5: Ethernet address: ... [...] tap5: promiscuous mode enabled [...] tap5: link state changed to UP [...] nd6_dad_timer: cancel DAD on tap5 because of ND6_IFF_IFDISABLED. [...] ada5 at ahcich6 bus 0 scbus4 target 0 lun 0 [...] ada5: <HGST HMS5C4040BLE640 MPAOA5D0> ATA8-ACS SATA 3.x device [...] ada5: Serial Number... [...] ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada5: Command Queueing enabled [...] ada5: 3815447MB (7814037168 512 byte sectors) [...] fuse_internal_do_getattr: cache incoherent on /mnt/XXXX Buggy FUSE server detected. To prevent data corruption, disable the data cache by mounting with -o direct_io, or as directed otherwise by your FUSE server's documentation [...] fuse_internal_do_getattr: cache incoherent on /mnt/XXXX Buggy FUSE server detected. To prevent data corruption, disable the data cache by mounting with -o direct_io, or as directed otherwise by your FUSE server's documentation [...] fuse_internal_do_getattr: cache incoherent on /mnt/XXXX Buggy FUSE server detected. To prevent data corruption, disable the data cache by mounting with -o direct_io, or as directed otherwise by your FUSE server's documentation [...] fuse_internal_do_getattr: cache incoherent on /mnt/XXXX Buggy FUSE server detected. To prevent data corruption, disable the data cache by mounting with -o direct_io, or as directed otherwise by your FUSE server's documentation