[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248088-47fa565344c SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0x9c002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16422342656 (15661 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 3 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0x93500000-0x935fffff,0x9360c000-0x9360ffff irq 16 at device 0.0 on pci1 [...] igb0: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0x93400000-0x934fffff,0x93608000-0x9360bfff irq 17 at device 0.1 on pci1 [...] igb1: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0x93300000-0x933fffff,0x93604000-0x93607fff irq 18 at device 0.2 on pci1 [...] igb2: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0x93200000-0x932fffff,0x93600000-0x93603fff irq 19 at device 0.3 on pci1 [...] igb3: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb4: <Intel(R) I350 (Copper)> mem 0x93000000-0x930fffff,0x9310c000-0x9310ffff irq 17 at device 0.0 on pci2 [...] igb4: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb5: <Intel(R) I350 (Copper)> mem 0x92f00000-0x92ffffff,0x93108000-0x9310bfff irq 18 at device 0.1 on pci2 [...] igb5: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 4 RX queues 4 TX queues [...] igb5: Using MSI-X interrupts with 5 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb6: <Intel(R) I350 (Copper)> mem 0x92e00000-0x92efffff,0x93104000-0x93107fff irq 19 at device 0.2 on pci2 [...] igb6: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 4 RX queues 4 TX queues [...] igb6: Using MSI-X interrupts with 5 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb7: <Intel(R) I350 (Copper)> mem 0x92d00000-0x92dfffff,0x93100000-0x93103fff irq 16 at device 0.3 on pci2 [...] igb7: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 4 RX queues 4 TX queues [...] igb7: Using MSI-X interrupts with 5 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 1.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Fury> port 0x3000-0x30ff mem 0x92c00000-0x92c0ffff,0x92b00000-0x92bfffff irq 18 at device 0.0 on pci3 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 240, limiting to 128 [...] mfi0: MaxCmd = 240, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c00f0 [...] mfi0: 2614 (709421082s/0x0020/info) - Shutdown command received from host [...] mfi0: 2615 (boot + 6s/0x0020/info) - Firmware initialization started (PCI ID 005f/1000/1f44/1028) [...] mfi0: 2616 (boot + 6s/0x0020/info) - Firmware version 4.300.01-8369 [...] mfi0: 2617 (boot + 8s/0x0020/info) - Package version XXX.XXX.XXX.XXX [...] mfi0: 2618 (boot + 8s/0x0020/info) - Board Revision A01 [...] mfi0: 2619 (boot + 25s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored [...] mfi0: 2620 (boot + 25s/0x0002/info) - Inserted: Encl PD 20 [...] xhci0: <Intel Sunrise Point USB 3.0 controller>mfi0: 2621 (boot + 25s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5947b0b0f87db mem 0x93700000-0x9370ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] f00,0000000000000000 [...] mfi0: 2622 (boot + 25s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] mfi0: 2623 (boot + 25s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=44332211060000xhci_interrupt: host controller halted [...] xhci_interrupt: host controller halted [...] xhci_interrupt: host controller halted [...] 00,0000000000000000 [...] mfi0: 2624 (boot + 25s/0x0002/info) - Inserted: PD 01(e0x20/s1) [...] mfi0: 2625 (boot + 25s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=44332211070000usbus000,0000000000000000 [...] mfi0: 2626 (boot + 45s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] mfi0: 2627 (709421142s/0x0020/info) - Time established as 06/24/22 21:25:42; (45 seconds since power on) [...] mfi0: 2628 (709421204s/0x0020/info) - Host driver is loaded and operational [...] on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x4040-0x4047,0x4048-0x404b,0x4020-0x403f mem 0x93714000-0x93715fff,0x93717000-0x937170ff,0x93716000-0x937167ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x92a30000-0x92a3ffff,0x92a40000-0x92a4ffff,0x92a50000-0x92a5ffff irq 16 at device 0.0 on pci4 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x92a00000-0x92a0ffff,0x92a10000-0x92a1ffff,0x92a20000-0x92a2ffff irq 17 at device 0.1 on pci4 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 29.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> at device 0.0 on pci6 [...] pci7: <PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> at device 0.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92800000-0x92803fff,0x92000000-0x927fffff irq 18 at device 0.0 on pci8 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcb7ff,0xed800-0xf17ff pnpid ORM0000 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1500000747 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mfid0 on mfi0 [...] mfid0: 953344MB (1952448512 sectors) RAID volume 'disk' is optimal [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] cd0 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GU90N A3C0> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ses0: pass0,cd0 in 'Slot 04', SATA Slot: scbus4 target 0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 1> on usbus0 [...] uhub1: 6 ports with 6 removable, self powered [...] ugen0.3: <Raritan D2CIM-VUSB> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Keybd+Abs+Rel Mouse> on usbus0 [...] kbd2 at ukbd0