[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p2 stable/25.7-n271676-ab2281de1853 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 1024x768 [...] [1] CPU microcode: no matching update found [...] [1] CPU: Intel(R) Xeon(R) D-2146NT CPU @ 2.30GHz (2300.00-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x50654 Family=0x6 Model=0x55 Stepping=4 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] [1] Structured Extended Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL> [...] [1] Structured Extended Features2=0x18<PKU,OSPKE> [...] [1] Structured Extended Features3=0xbc002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] IA32_ARCH_CAPS=0x2000c04<RSBA> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 68719476736 (65536 MB) [...] [1] avail memory = 66430492672 (63353 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <SUPERM SMCI--MB> [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-23 [...] [1] ioapic1 <Version 2.0> irqs 24-31 [...] [1] ioapic2 <Version 2.0> irqs 32-39 [...] [1] ioapic3 <Version 2.0> irqs 40-47 [...] [1] ioapic4 <Version 2.0> irqs 48-55 [...] [1] Launching APs: 1 9 6 10 15 11 4 2 8 3 5 12 13 7 14 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0x6e7a4000-0x6e7a4017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.1 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] [1] acpi0: <SUPERM SUPERM> [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] [1] Event timer "HPET" frequency 24000000 Hz quality 350 [...] [1] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] [1] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] [1] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] [1] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] [1] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] [1] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] [1] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] [1] hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] device_attach: hpet1 attach returned 12 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] [1] acpi_syscontainer0: <System Container> on acpi0 [...] [1] apei0: <ACPI Platform Error Interface> on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] [1] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] [1] pci0: <dasp, performance counters> at device 5.6 (no driver attached) [...] [1] pci0: <dasp, performance counters> at device 8.1 (no driver attached) [...] [1] pci0: <unknown> at device 17.0 (no driver attached) [...] [1] ahci0: <Intel Lewisburg AHCI SATA controller> port 0x6030-0x6037,0x6020-0x6023,0x6000-0x601f mem 0xaa494000-0xaa495fff,0xaa496000-0xaa4960ff,0xaa400000-0xaa47ffff irq 16 at device 17.5 numa-domain 0 on pci0 [...] [1] ahci0: AHCI v1.31 with 5 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] [1] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] [1] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] [1] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] [1] xhci0: <Intel Lewisburg USB 3.0 controller> mem 0xaa480000-0xaa48ffff irq 16 at device 20.0 numa-domain 0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0: waiting for BIOS to give up control [...] [1] xhci_interrupt: host controller halted [...] [1] usbus0 numa-domain 0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] pci0: <simple comms> at device 22.1 (no driver attached) [...] [1] pci0: <simple comms> at device 22.4 (no driver attached) [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci0 [...] [1] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0 [...] [1] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 numa-domain 0 on pci2 [...] [1] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] [1] vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xa9000000-0xa9ffffff,0xaa000000-0xaa01ffff irq 16 at device 0.0 numa-domain 0 on pci3 [...] [1] vgapci0: Boot video device [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 29.0 numa-domain 0 on pci0 [...] [1] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] [1] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 29.3 numa-domain 0 on pci0 [...] [1] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] [1] igb0: <Intel(R) I210 (Copper)> port 0x4000-0x401f mem 0xaa300000-0xaa37ffff,0xaa380000-0xaa383fff irq 19 at device 0.0 numa-domain 0 on pci5 [...] [1] igb0: EEPROM V3.25-0 eTrack 0x800005cc [...] [1] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb0: Using 4 RX queues 4 TX queues [...] [1] igb0: Using MSI-X interrupts with 5 vectors [...] [1] igb0: Ethernet address: ... [...] [1] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 29.4 numa-domain 0 on pci0 [...] [1] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] [1] igb1: <Intel(R) I350 (Copper)> port 0x3060-0x307f mem 0xaa260000-0xaa27ffff,0xaa28c000-0xaa28ffff irq 16 at device 0.0 numa-domain 0 on pci6 [...] [1] igb1: EEPROM V1.63-0 eTrack 0x800009fb [...] [1] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb1: Using 8 RX queues 8 TX queues [...] [1] igb1: Using MSI-X interrupts with 9 vectors [...] [1] igb1: Ethernet address: ... [...] [1] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] igb2: <Intel(R) I350 (Copper)> port 0x3040-0x305f mem 0xaa240000-0xaa25ffff,0xaa288000-0xaa28bfff irq 17 at device 0.1 numa-domain 0 on pci6 [...] [1] igb2: EEPROM V1.63-0 eTrack 0x800009fb [...] [1] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb2: Using 8 RX queues 8 TX queues [...] [1] igb2: Using MSI-X interrupts with 9 vectors [...] [1] igb2: Ethernet address: ... [...] [1] igb2: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] igb3: <Intel(R) I350 (Copper)> port 0x3020-0x303f mem 0xaa220000-0xaa23ffff,0xaa284000-0xaa287fff irq 18 at device 0.2 numa-domain 0 on pci6 [...] [1] igb3: EEPROM V1.63-0 eTrack 0x800009fb [...] [1] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb3: Using 8 RX queues 8 TX queues [...] [1] igb3: Using MSI-X interrupts with 9 vectors [...] [1] igb3: Ethernet address: ... [...] [1] igb3: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] igb4: <Intel(R) I350 (Copper)> port 0x3000-0x301f mem 0xaa200000-0xaa21ffff,0xaa280000-0xaa283fff irq 19 at device 0.3 numa-domain 0 on pci6 [...] [1] igb4: EEPROM V1.63-0 eTrack 0x800009fb [...] [1] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb4: Using 8 RX queues 8 TX queues [...] [1] igb4: Using MSI-X interrupts with 9 vectors [...] [1] igb4: Ethernet address: ... [...] [1] igb4: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 29.6 numa-domain 0 on pci0 [...] [1] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] [1] igb5: <Intel(R) I350 (Copper)> port 0x2060-0x207f mem 0xaa160000-0xaa17ffff,0xaa18c000-0xaa18ffff irq 18 at device 0.0 numa-domain 0 on pci7 [...] [1] igb5: EEPROM V1.63-0 eTrack 0x800009fb [...] [1] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb5: Using 8 RX queues 8 TX queues [...] [1] igb5: Using MSI-X interrupts with 9 vectors [...] [1] igb5: Ethernet address: ... [...] [1] igb5: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] igb6: <Intel(R) I350 (Copper)> port 0x2040-0x205f mem 0xaa140000-0xaa15ffff,0xaa188000-0xaa18bfff irq 19 at device 0.1 numa-domain 0 on pci7 [...] [1] igb6: EEPROM V1.63-0 eTrack 0x800009fb [...] [1] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb6: Using 8 RX queues 8 TX queues [...] [1] igb6: Using MSI-X interrupts with 9 vectors [...] [1] igb6: Ethernet address: ... [...] [1] igb6: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] igb7: <Intel(R) I350 (Copper)> port 0x2020-0x203f mem 0xaa120000-0xaa13ffff,0xaa184000-0xaa187fff irq 16 at device 0.2 numa-domain 0 on pci7 [...] [1] igb7: EEPROM V1.63-0 eTrack 0x800009fb [...] [1] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb7: Using 8 RX queues 8 TX queues [...] [1] igb7: Using MSI-X interrupts with 9 vectors [...] [1] igb7: Ethernet address: ... [...] [1] igb7: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] igb8: <Intel(R) I350 (Copper)> port 0x2000-0x201f mem 0xaa100000-0xaa11ffff,0xaa180000-0xaa183fff irq 17 at device 0.3 numa-domain 0 on pci7 [...] [1] igb8: EEPROM V1.63-0 eTrack 0x800009fb [...] [1] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb8: Using 8 RX queues 8 TX queues [...] [1] igb8: Using MSI-X interrupts with 9 vectors [...] [1] igb8: Ethernet address: ... [...] [1] igb8: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] [1] isa0: <ISA bus> numa-domain 0 on isab0 [...] [1] pci0: <memory> at device 31.2 (no driver attached) [...] [1] pci0: <serial bus> at device 31.5 (no driver attached) [...] [1] pcib8: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] [1] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] [1] pcib9: <ACPI PCI-PCI bridge> irq 39 at device 0.0 numa-domain 0 on pci8 [...] [1] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] [1] nvme0: <Generic NVMe Device> mem 0xc5e00000-0xc5e03fff irq 32 at device 0.0 numa-domain 0 on pci9 [...] [1] pcib10: <ACPI PCI-PCI bridge> irq 39 at device 1.0 numa-domain 0 on pci8 [...] [1] pci10: <ACPI PCI bus> numa-domain 0 on pcib10 [...] [1] nvme1: <Generic NVMe Device> mem 0xc5d00000-0xc5d03fff irq 39 at device 0.0 numa-domain 0 on pci10 [...] [1] pci8: <dasp, performance counters> at device 5.6 (no driver attached) [...] [1] pcib11: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] [1] pci11: <ACPI PCI bus> numa-domain 0 on pcib11 [...] [1] pci11: <dasp, performance counters> at device 5.6 (no driver attached) [...] [1] pcib12: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] [1] pci12: <ACPI PCI bus> numa-domain 0 on pcib12 [...] [1] pcib13: <ACPI PCI-PCI bridge> irq 55 at device 3.0 numa-domain 0 on pci12 [...] [1] pci13: <ACPI PCI bus> numa-domain 0 on pcib13 [...] [1] pcib14: <PCI-PCI bridge> mem 0xfbe00000-0xfbe1ffff irq 55 at device 0.0 numa-domain 0 on pci13 [...] [1] pci14: <PCI bus> numa-domain 0 on pcib14 [...] [1] pcib15: <PCI-PCI bridge> irq 55 at device 0.0 numa-domain 0 on pci14 [...] [1] pci15: <PCI bus> numa-domain 0 on pcib15 [...] [1] pci15: <processor> at device 0.0 (no driver attached) [...] [1] pcib16: <PCI-PCI bridge> at device 2.0 numa-domain 0 on pci14 [...] [1] pci16: <PCI bus> numa-domain 0 on pcib16 [...] [1] pci16: <processor> at device 0.0 (no driver attached) [...] [1] pcib17: <PCI-PCI bridge> at device 3.0 numa-domain 0 on pci14 [...] [1] pci17: <PCI bus> numa-domain 0 on pcib17 [...] [1] ixl0: <Intel(R) Ethernet Connection X722 for 10GBASE-T - 2.3.3-k> mem 0xf9000000-0xf9ffffff,0xfb018000-0xfb01ffff at device 0.0 numa-domain 0 on pci17 [...] [1] ixl0: fw 3.10.52867 api 1.6 nvm 4.00 etid 8000150c oem 1.263.0 [...] [1] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] [1] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] ixl0: Using 8 RX queues 8 TX queues [...] [1] ixl0: Using MSI-X interrupts with 9 vectors [...] [1] ixl0: Ethernet address: ... [...] [1] ixl0: Allocating 8 queues for PF LAN VSI; 8 queues active [...] [1] ixl0: SR-IOV ready [...] [1] ixl0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] ixl1: <Intel(R) Ethernet Connection X722 for 10GBASE-T - 2.3.3-k> mem 0xf8000000-0xf8ffffff,0xfb010000-0xfb017fff at device 0.1 numa-domain 0 on pci17 [...] [1] ixl1: fw 3.10.52867 api 1.6 nvm 4.00 etid 8000150c oem 1.263.0 [...] [1] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] [1] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] ixl1: Using 8 RX queues 8 TX queues [...] [1] ixl1: Using MSI-X interrupts with 9 vectors [...] [1] ixl1: Ethernet address: ... [...] [1] ixl1: Allocating 8 queues for PF LAN VSI; 8 queues active [...] [1] ixl1: SR-IOV ready [...] [1] ixl1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] ixl2: <Intel(R) Ethernet Connection X722 for 10GbE SFP+ - 2.3.3-k> mem 0xf7000000-0xf7ffffff,0xfb008000-0xfb00ffff at device 0.2 numa-domain 0 on pci17 [...] [1] ixl2: fw 3.10.52867 api 1.6 nvm 4.00 etid 8000150c oem 1.263.0 [...] [1] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] [1] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] ixl2: Using 8 RX queues 8 TX queues [...] [1] ixl2: Using MSI-X interrupts with 9 vectors [...] [1] ixl2: Ethernet address: ... [...] [1] ixl2: Allocating 8 queues for PF LAN VSI; 8 queues active [...] [1] ixl2: SR-IOV ready [...] [1] ixl2: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] ixl3: <Intel(R) Ethernet Connection X722 for 10GbE SFP+ - 2.3.3-k> mem 0xf6000000-0xf6ffffff,0xfb000000-0xfb007fff at device 0.3 numa-domain 0 on pci17 [...] [1] ixl3: fw 3.10.52867 api 1.6 nvm 4.00 etid 8000150c oem 1.263.0 [...] [1] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] [1] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] ixl3: Using 8 RX queues 8 TX queues [...] [1] ixl3: Using MSI-X interrupts with 9 vectors [...] [1] ixl3: Ethernet address: ... [...] [1] ixl3: Allocating 8 queues for PF LAN VSI; 8 queues active [...] [1] ixl3: ixl_set_link: Error getting phy capabilities -7, aq error: 5 [...] [1] ixl3: SR-IOV ready [...] [1] ixl3: netmap queues/slots: TX 8/1024, RX 8/1024 [...] [1] pci12: <dasp, performance counters> at device 5.6 (no driver attached) [...] [1] pci12: <dasp, performance counters> at device 18.0 (no driver attached) [...] [1] pci12: <dasp, performance counters> at device 18.1 (no driver attached) [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] uart0: console (115200,n,8,1) [...] [1] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] [1] orm0: <ISA Option ROM> at iomem 0xc0000-0xc0fff pnpid ORM0000 on isa0 [...] [1] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] [1] cpufreq0: <CPU frequency control> numa-domain 0 on cpu0 [...] [1] cpufreq1: <CPU frequency control> numa-domain 0 on cpu1 [...] [1] cpufreq2: <CPU frequency control> numa-domain 0 on cpu2 [...] [1] cpufreq3: <CPU frequency control> numa-domain 0 on cpu3 [...] [1] cpufreq4: <CPU frequency control> numa-domain 0 on cpu4 [...] [1] cpufreq5: <CPU frequency control> numa-domain 0 on cpu5 [...] [1] cpufreq6: <CPU frequency control> numa-domain 0 on cpu6 [...] [1] cpufreq7: <CPU frequency control> numa-domain 0 on cpu7 [...] [1] cpufreq8: <CPU frequency control> numa-domain 0 on cpu8 [...] [1] cpufreq9: <CPU frequency control> numa-domain 0 on cpu9 [...] [1] cpufreq10: <CPU frequency control> numa-domain 0 on cpu10 [...] [1] cpufreq11: <CPU frequency control> numa-domain 0 on cpu11 [...] [1] cpufreq12: <CPU frequency control> numa-domain 0 on cpu12 [...] [1] cpufreq13: <CPU frequency control> numa-domain 0 on cpu13 [...] [1] cpufreq14: <CPU frequency control> numa-domain 0 on cpu14 [...] [1] cpufreq15: <CPU frequency control> numa-domain 0 on cpu15 [...] [1] Timecounter "TSC-low" frequency 1147304571 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ixl3: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] [1] ixl3: link state changed to UP [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [2] uhub0 numa-domain 0 on usbus0 [...] [2] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [2] nda0 at nvme0 bus 0 scbus6 target 0 lun 1 [...] nda0: <INTEL SSDPEK1A118GA U5110550 PHOC150200V2118B> [...] nda0: Serial Number... [...] [2] nda0: nvme version 1.1 [...] nda0: 112925MB (231270400 512 byte sectors) [...] [2] nda1 at nvme1 bus 0 scbus7 target 0 lun 1 [...] nda1: <INTEL SSDPEK1A118GA U5110550 PHOC150200L6118B> [...] nda1: Serial Number... [...] [2] nda1: nvme version 1.1 [...] nda1: 112925MB (231270400 512 byte sectors) [...] [2] ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] [3] Trying to mount root from zfs:zroot/ROOT/default []... [...] [4] Root mount waiting for: usbus0 [...] [4] uhub0: 26 ports with 26 removable, self powered [...] [4] ugen0.2: <vendor 0x0557 product 0x7000> at usbus0 [...] [4] uhub1 numa-domain 0 on uhub0 [...] [4] uhub1: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 1> on usbus0 [...] [5] uhub1: 4 ports with 3 removable, self powered [...] [5] Root mount waiting for: usbus0 [...] [5] ugen0.3: <vendor 0x0557 product 0x2419> at usbus0 [...] [5] ukbd0 numa-domain 0 on uhub1 [...] [5] ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] [5] kbd2 at ukbd0 [...] [5] ugen0.4: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] [5] uhub2 numa-domain 0 on uhub0 [...] [5] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 3> on usbus0 [...] [5] uhub2: MTT enabled [...] [6] Root mount waiting for: usbus0 [...] [6] uhub2: 4 ports with 4 removable, self powered [...] [7] ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] [7] uhub3 numa-domain 0 on uhub2 [...] [7] uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 4> on usbus0 [...] [7] uhub3: MTT enabled [...] [7] Root mount waiting for: usbus0 [...] [7] uhub3: 4 ports with 4 removable, self powered [...] [7] Dual Console: Video Primary, Serial Secondary [...] [7] pid 31 (zpool) is attempting to use unsafe AIO requests - not logging anymore